http://bugs.winehq.org/show_bug.cgi?id=11832
Summary: App scans folders with charts but fails to display them
Product: Wine
Version: 0.9.56.
Platform: PC
URL: http://rosepointnav.com/CoastalExplorer/Trial/default.ht
m
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: n5470(a)pinefields.com
As part of normal startup, Coastal Explorer (CE) scans designated (either by
default or user choice) specific folders within all drives, building an XML
document with descriptions of each chart found. At the end of the process,
however, CE announces there are no charts to be found and asks if the user
wants to download charts from web sites.
It was found that interrupting the scan process (there is a "Stop" button
available) will make charts visible and usable. This is, however, a rather
inelegant solution and one which poses problems when using the "Chart
Portfolio" tool (e.g., duplication of charts).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10886
Summary: RTS_CONTROL_TOGGLE doesn't work
Product: Wine
Version: 0.9.51.
Platform: All
OS/Version: All
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-ports
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bugzilla(a)tut.by
in WINE, setting DCB.fRtsControl to RTS_CONTROL_TOGGLE and doing SetCommState()
sets RTS line always high. (btw, this is the same as described to be bug in
win95, see http://support.microsoft.com/kb/140030 ). According to MSDN, RTS
should be set to high before data transmission, then data should be sent, and
then RTS should go back to low.
The workaround is to toggle RTS manually.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11991
Summary: Wine Windows OpenGL support regression
Product: Wine
Version: 0.9.57.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P3
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: imamdxl8805(a)yahoo.com
Dear Wine developers,
This is wine version 0.9.56 and 0.9.57
There are two games that support OpenGL rendering as well as Direct3D redering.
Here are the games:
1. Hitmen 2 Silent Assasin
2. Hitmen 3 Contracts
When I have updated my wine version to 0.9.57, then these games are not playing
anymore with OpenGL rendering. But when I start these games with Direct3D
rendering they are playing fine.
These games played properly with wine version 0.9.55 with OpenGL rendering as
well as Direct3D rendering.
Then I have decided to reinstall wine 0.9.55.
Sorry for the err message printed in the command line. Because I do not have
Internet connection in my home PC.
Best regards,
DXL
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10643
Summary: WInUAE settings window reappears after being dismissed
Product: Wine
Version: 0.9.50.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: wine-user
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: markk(a)clara.co.uk
Hi,
WinUAE is an open source (GPL) emulator of Amiga computers. After running
WinUAE and starting the emulation, pressing F12 brings up the settings window.
When this is dismissed by pressing Reset, Quit, Restart, OK, or Cancel, the
window closes and reopens. It should not reopen. That repeats if you press one
of those buttons again. If you press Quit, then Cancel a few times after the
window closes and reopens, the program does eventually quit.
Steps to demonstrate the problem:
(Typical usage of WinUAE involves obtaining an Amiga ROM image file, however it
is possible to use some software without.)
- Download WinUAE 1.4.4 from http://www.winuae.net/. Direct URL for the
installer is http://www.winuae.net/files/InstallWinUAE1440.exe
- Run the installer.
- For an example disk image, you can download e.g.
ftp://ftp.coresystems.de/pub/uae/rsi1.adf.gz
- Start WinUAE. The settings/configuration window appears. Click the "Floppy
drives" entry in the left side of the window, then the "..." button for drive
DF0:. Select the rsi1.adf.gz file.
- Click Start to start emulation.
- Press F12 to bring up the settings window.
- Try to dismiss the window by pressing one of the buttons at the bottom.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16296
Summary: Activeworlds client 4.2 chat breaks after sending one
message
Product: Wine
Version: 1.1.9
Platform: Other
URL: http://activeworlds.com/products/download.asp
OS/Version: other
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
Do "winetricks vcrun6" to get missing redistributables (mfc42 and msvcp60),
"winetricks wininet" if needed to work around bug 16292, and
"winetricks directx9" if needed to work around bug 16293.
Then send a chat message by typing in the chat window.
("Hello, is chat working?" is a good one to try :-)
If somebody is around and friendly, they will reply, and
you will see their reply above their head, but the chat
window goes blank after you put in your first message.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11365
Summary: Total Annihilation:Kingdoms dies in fullscreen after
selecting a game or graphic options from menu
Product: Wine
Version: 0.9.54.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: directx-ddraw
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jamesp(a)ndsupernet.com
Created an attachment (id=10472)
--> (http://bugs.winehq.org/attachment.cgi?id=10472)
output of wine using WINEDEBUG=warn+all, last 2 lines of the out put are
probably the cause of the problem
Running the game in fullscreen with winver set to 2000, the game dies when
selecting graphics options from the main menu or launching any game.
Setting winver to XP does the same thing, but also the intro movie and main
menu don't look right in fullscreen, My gnome taskbar never gets covered up.
Yet the game runs perfectly when using an emulated window.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15740
Summary: nullDC garbled screen with ATI cards (Radeon HD4870) and
fglrx drivers
Product: Wine
Version: 1.1.6
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: milest3g(a)gmail.com
Created an attachment (id=16834)
--> (http://bugs.winehq.org/attachment.cgi?id=16834)
Log
Using an ATI card and fglrx 8.10 (the one in Ubuntu 8.10) nullDC starts, and
the interface works, but starting the emulation (whether with a game or just
the Dreamcast bios) results in a garbled window, while this error is repeated
in the console :
fixme:d3d_shader:shader_glsl_load_constants >>>>>>>>>>>>>>>>>
GL_INVALID_OPERATION (0x502) from glUniform4fvARB @ glsl_shader.c / 445
In order to start the program, natives dll are needed:
d3dx9_35
msvcp80
msvcr80
msvcr80d
A screenshot has been submited at
http://appdb.winehq.org/appimage.php?iId=20821
Attached is the output redirected to a log file.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14668
Summary: Star Sonata: No key commands work in the game.
Product: Wine
Version: 1.1.2
Platform: PC-x86-64
URL: http://www.starsonata.com
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: zaehlas(a)ultralarp.com
Created an attachment (id=15121)
--> (http://bugs.winehq.org/attachment.cgi?id=15121)
Error list from Wine
Graphics and sound work perfectly. No keyboard commands work. You can use the
mouse to do all normal activities, and even type into the chat bar, however the
normally "hotkeyed" keys will not respond.
Errors given by Wine are in the attachment.
Program can be obtained at http://www.starsonata.com/download.html
It is a free download, and free account up to level 20.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12464
Summary: ShellExecute does not integrate well with external
handlers
Product: Wine
Version: CVS/GIT
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: shell32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: rmh(a)aybabtu.com
ShellExecute does not integrate well with external handlers.
For example; my GNOME desktop has a PDF viewer, but when an application that is
run via wine calls ShellExecute on a PDF file, wine is only capable of opening
this file with PDF handlers that are installed within the wine environment.
I think the best way to handle this would be to replace the implementation with
an xdg-open(1) wrapper.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15824
Summary: Microsoft Chat's comic mode graphical glitches
Product: Wine
Version: CVS/GIT
Platform: All
OS/Version: other
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: Elliotw2(a)gmail.com
Microsoft Chat has thick black lines instead of thin ones around borders of
comic mode. I don't know what causes this, but I tested with native and builtin
GDIplus and Directdraw and it shows up in both.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16182
Summary: Scrollbar background incorrectly blank/white in IDA Pro
Product: Wine
Version: 1.1.9
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: markk(a)clara.co.uk
IDA Pro is an interactive disassembler. A freeware version can be downloaded
from http://www.hex-rays.com/idapro/idadownfreeware.htm
The background colour of the scrollbars at the bottom and right edges of the
disassembly window is white in Wine. They should be a grey/white crosshatch
pattern.
Strangely, this issue seems to apply only to the disassembly window; scrollbars
for other windows (for example text search results windows) have the correct
background.
To reproduce: download and install IDA Pro freeware version. Run the program,
and open a Windows executable. Notice the white scrollbar backgrounds. Choose
Search/text... (or press Alt-T) and enter some text which appears several times
in the program (e.g. mov). When the search window opens, notice its scrollbars
have the correct background.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12400
Summary: Wine bug or Nvidia bug??
Product: Wine
Version: unspecified
Platform: PC
URL: http://www.gamershell.com/download_1856.shtml
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jeremielapuree(a)yahoo.fr
Created an attachment (id=11914)
--> (http://bugs.winehq.org/attachment.cgi?id=11914)
screenshot with my geforce 3
Here is a strange bug. I do not know whether it is a wine or a nvidia bug.
With my old geforce 3 or geforce 440go and the legacy driver 96.43.05,
everything is fine in Indiana Jones and the emperor's tomb (see the screenshot)
But with my geforce 7600go, there are graphical glitches (see the second
screenshot)
Can a d3d guru explain what happens. I can give some useful logs or more
informations if requested.
Joaopa
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14119
Summary: Saving project files in Actel Designer v8.3
Product: Wine
Version: 1.0-rc2
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dgeorgester(a)gmail.com
When saving the project file (.adb), the program reports:
"Unable to fully access file "Z:\tmp\foo.adb". Check the permissions and the
available disk space for the file location.
The program creates an intermediate lock file, immediately deletes it and then
reports the error. Attached is a snippet of an strace of the wineserver
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9467
Summary: Macromedia Studio 8 installer hangs
Product: Wine
Version: 0.9.44.
Platform: Other
OS/Version: other
Status: NEW
Severity: enhancement
Priority: P2
Component: wine-misc
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
To try installing Studio 8, you first have to work around a
bug in the way the CD-ROM was mastered: they
included rockridge extensions, but neglected
to make files world-readable. This causes
mysterious errors about not being able to run the installer:
wine: could not load L"D:\\install studio 8.exe": Module not found
So you have to remount the cd-rom with the 'norock' option, e.g.:
$ umount /media/cdrom
$ sudo mount /dev/cdrom /media/cdrom -o norock
OK, on to the problem. Like Studio MX (see bug 9035),
Studio 8's top level installer runs the installers of six
or so apps. And like the earlier version, it hangs.
But this hang is bad; it's on the end of the
first app, and it it can't be solved by clicking "OK".
The hang occurs at the end of the Dreamweaver installation,
right after it says "Publishing product information".
The installer still responds to the mouse, but if you
ask it to cancel, it keeps going, no matter how many
times you say you want to cancel.
+process revealed the commandline used to invoke the
problematic subinstaller. To reproduce with just
the subinstaller, do
wine msiexec.exe /i 'D:\fscommand\Macromedia_Dreamweaver_8.msi' MM_STUDIO=1
CREATEQUICKLAUNCHSHORTCUT=0 CREATEDESKTOPSHORTCUT=0 MACROMEDIA='c:\Program
Files\Macromedia\'
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11311
Summary: C-Geo 8
Product: Wine
Version: 0.9.53.
Platform: PC
URL: http://www.c-geo.com/
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ziemi_(a)poczta.onet.pl
Created an attachment (id=10419)
--> (http://bugs.winehq.org/attachment.cgi?id=10419)
zipped logs and screenshots
Installed Wine Gecko 0.1.0.
Wine compiled with OPENGL.
After executing program appears OLE error (see fig1 and log1), but it works
properly without ole funtions when it crash.
It was on normal user account, on root account program is not executing, see
fig2 and log2.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14288
Summary: winhelp: text/paragraph formatting bugs
Product: Wine
Version: 1.1.0
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: programs
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: markk(a)clara.co.uk
Some help files do not display correctly in Wine winhelp. For example, a
paragraph which should appear to the right of an icon like this:
[pic] This is a paragraph
whose left edge is
to the right of a picture
may actually appear below the icon, like this:
[pic]
This is a paragraph whose left edge is to the right of a picture
To demonstrate, download msdncd.hlp from
http://bugs.winehq.org/attachment.cgi?id=14568
and load the file into Wine winhelp.
On the "Opening Books and Topics" page, the paragraph formatting is incorrect.
(The paragraph corresponding to each icon should appear to the right of it.)
On "Searching for Words and Phrases", paragraph formatting is incorrect, and
the example text should be rendered in bold.
Also, at the top of each page there should be a grey bar. This does not appear
in
Wine winhelp.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14821
Summary: Kirikiri based games update screen slowly
Product: Wine
Version: 1.1.2
Platform: PC
URL: http://kikyou.info/dl_redirect.php?%2Ftvp%2Ffiles%2Fkr23
0rc1.lzh
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: drakh(a)spamcop.net
Games based on the open source Kirikiri engine update the screen rather slowly.
These are Japanese visual novels, mainly consisting of static images with some
simple filters and compositing, accompanied by text and sounds. They're very
undemanding resource wise, and screen updates happen more or less
instantaneously in Windows on the same hardware. It's most noticeable when the
background image changes, taking a second or two to load from top to bottom,
but even text rendering is clearly slower when fast forwarding through a scene.
The engine has been used for commercial games like Fate/Stay night, though the
author's generic build (linked to in the URL field) has a simple example script
that demonstrates the problem. To run it, you need to have Japanese language
support installed, then launch "\kirikiri2\krkr.eXe" (passing wine the
LANG=ja_JP.UTF-8 variable) and point it to the "\kag3\syoukai\" folder.
The source is available through SVN
(https://sv.kikyou.info/trac/kirikiri/wiki/AboutSubversion).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13183
Summary: Control '' has no parent window in ExpressQuantumGrid
Product: Wine
Version: 1.0-rc1
Platform: All
URL: http://www.devexpress.com/Downloads/VCL/ExQuantumGrid/fi
les/ExpressQuantumGrid%206%20Demos.exe
OS/Version: All
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: user32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: developers(a)tefnet.pl
There is a problem with ExpressQuantumGrid widget called ExtLookupComboBox
Editor. When you try to click on combo box element it pop ups a warning:
"Control '' has no parent window"
But when you select an item from combo box using keyboard it works fine.
Steps to reproduce:
1. Download exe from link above
2. Install mdac and jet4
3. Run application
4. Select "Inplace editors (Updated)"
5. Open combo box "ExtLookupComboBox Editor"
6.
a) Click on any element in combo box (you'll get a warning)
b) Set focus on any element and press enter (you won't get a warning)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9623
Summary: Photoshop 7 text tool not working without Times.TTF from
corefonts
Product: Wine
Version: 0.9.44.
Platform: Other
OS/Version: other
Status: NEW
Severity: enhancement
Priority: P2
Component: wine-misc
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mikolaj.zalewski(a)gmail.com
I have this problem only on one system. On another I didn't install corefonts
but it worked - I will have to check why. Photoshop writes that it can't
complete the specified operation because a system font was not found. Of course
it's not Times New Romand that is selected in the tool. Using winetricks to
install corefonts works.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12635
Summary: Windows Media Player 10 doesn't update music list
promptly
Product: Wine
Version: 0.9.59.
Platform: Other
URL: http://www.microsoft.com/windows/windowsmedia/player/dow
nload/download.aspx
OS/Version: other
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
If you add or delete an item in the music list,
you have to switch to a different list and back
before the music list reflects the update.
It's not just a drawing problem, I think;
moving it offscreen and back onscreen doesn't fix it.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14134
Summary: NetBSD fixes for Wine 1.0
Product: Wine
Version: 1.0.0
Platform: PC
OS/Version: NetBSD
Status: UNCONFIRMED
Severity: enhancement
Priority: P1
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jmcneill(a)netbsd.org
Created an attachment (id=14382)
--> (http://bugs.winehq.org/attachment.cgi?id=14382)
Use wine-kthread by default on NetBSD
The attached patches are required for Wine 1.0 to work properly on NetBSD.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13191
Summary: Trackmania Nations Forever doesn't work with PC2/3
shaders or with bloom-effect
Product: Wine
Version: 1.0-rc1
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ape3000(a)gmail.com
When I try to enable PC2 or PC3 shaders in Trackmania Nations Forever
configuration and then play the game it doesn't work. The menus are drawn as
solid black boxes. PC0(off?) and PC1 works fine.
When I enable bloom-effect, it will add some annoying white bars to everywhere
with bright light. So there is just white bars instead of the correct effect.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17098
Summary: Allow using iso images (via fuseiso) in drives setup @
winecfg.
Product: Wine
Version: 1.1.13
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: chalkerx(a)gmail.com
To mount an iso image to wine one should create a mountpoint, mount it manually
there, and use wincfg to point wine to that directory. After reboot it must be
done again (the mounting part).
If fuseiso in installed, it could be simplified to the user by allowing to
point to an image file in winecfg, auto creating a drive_* folder and mounting
an iso there via fuseiso on wine startup and unmounting on wine shutdown.
This would allow user to point a drive to an iso directly from gui and just
once.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17524
Summary: k-meleon crash on startup (Unhandled page fault)
Product: Wine
Version: 1.1.15
Platform: PC
URL: http://kmeleon.sourceforge.net/download.php
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: winehq(a)gringer.org
Created an attachment (id=19632)
--> (http://bugs.winehq.org/attachment.cgi?id=19632)
Crash on starting of program
Using the non-installer version of k-meleon, the program crashes on startup.
Steps to reproduce:
1) Download K-Meleon1.5.2en-US.7z from website
(http://kmeleon.sourceforge.net/download.php), and unzip into some directory:
~/install/kmeleon/program$ 7z x K-Meleon1.5.2en-US.7z
2) Dowload installer version (K-Meleon1.5.2en-US.exe) from website, and extract
msvcp71.dll and msvcr71.dll files:
~/install/kmeleon/program$ 7z x ~/install/wine/K-Meleon1.5.2en-US.exe ms*.dll
3) Run k-meleon.exe and observe crash
This follows the portable workflow mentioned on the kmeleon wiki:
http://kmeleon.sourceforge.net/wiki/KMPortable
What should happen:
3) k-meleon doesn't crash.
A log of the crash has been attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17221
Summary: Google Sketchup plugin Cutlist does not work
Product: Wine
Version: 1.1.7
Platform: PC
URL: http://lumberjocks.com/jocks/daltxguy/blog/5143
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mellery(a)gmail.com
Created an attachment (id=19150)
--> (http://bugs.winehq.org/attachment.cgi?id=19150)
console output
The plugin cutlist (download link is in the bug report) doesn't load
completely, when I start the plugin only the logo and 4 button boxes load not
the settings box that should be inbetween. Also clicking on the buttons have
no effect.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.