http://bugs.winehq.org/show_bug.cgi?id=9575
Summary: IBExpert need windows native ole32.dll to run
Product: Wine
Version: 0.9.44.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: c_pradelli(a)yahoo.com
To run ibexpert ole32.dll needs to be overriden (or dcom98 installed).
I can't detect why, there are no fixme printed on screen.
The application raise an access violation when starts and then you can't close
it.
The application is in AppDB
http://appdb.winehq.org/appview.php?iVersionId=9049
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9401
Summary: Dragon Naturally Speaking 7 crashes after training
complete
Product: Wine
Version: CVS
Platform: Other
URL: http://scansoft.com
OS/Version: other
Status: NEW
Severity: enhancement
Priority: P2
Component: wine-ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
Created an attachment (id=7715)
--> (http://bugs.winehq.org/attachment.cgi?id=7715)
+ole log of running training, and error that happened shortly thereafter
After user training is complete, DNS puts up a dialog
saying something like "Congratulations! Training is complete."
The next thing you do crashes with a dialog box
saying something like "Unexpected error. COM out of memory."
and log messages like
Unhandled exception: page fault on read access to 0x00000000 in 32-bit code
(0x0
0000000).
Fortunately, the error repeats the next time you start
and try to do something, you don't have to repeat training.
Better make a copy of ~/.wine once you finish training,
though, so you can get back to that state quickly
in case something goes wrong. (e.g. running a +relay log
at that point filled up my disk, and after that, dragon
wouldn't start properly.)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9388
Summary: installer stuck for TRS 2006 Demo
Product: Wine
Version: CVS
Platform: PC-x86-64
URL: http://www.auran.com/TRS2006/index.php
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-misc
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dan(a)danny.cz
When trying to install the demo for TRS 2006, the installer gets stuck on the
first installation wizard page.
output from the terminal:
fixme:actctx:parse_depend_manifests Could not find dependent assembly
L"Microsoft.Windows.Common-Controls"
fixme:actctx:parse_depend_manifests Could not find dependent assembly
L"Microsoft.Windows.Common-Controls"
err:ole:TLB_ReadTypeLib Loading of typelib L"c:\\Program Files\\Common
Files\\InstallShield\\Professional\\RunTime\\IsProBE.tlb" failed with error 2
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15722
Summary: OpenOffice3 apps won't run
Product: Wine
Version: 1.1.6
Platform: PC
URL: http://openoffice.bouncer.osuosl.org/?product=OpenOffice
.org&os=winwjre&lang=en-US&version=3.0.0
OS/Version: Linux
Status: NEW
Keywords: download, source
Severity: normal
Priority: P2
Component: ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=16807)
--> (http://bugs.winehq.org/attachment.cgi?id=16807)
+ole in git
Tried running OpenOffice 3 today, installs without a hitch, but attempting to
run floods the console with:
fixme:ole:IEnumFORMATETC_Next_Proxy :stub
and office won't run.
And when I say flood, I mean it literally, I let it sit for about 1 minute and
my log ballooned to over 220K lines!
If you patch that fixme to shut up, then Office at least puts up its window,
but it's frozen/hung.
+ole attached
Sent a patch for the fixme:
http://www.winehq.org/pipermail/wine-patches/2008-October/063673.html
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16273
Summary: nVidia melody installer fails in ole
Product: Wine
Version: 1.1.9
Platform: PC
URL: http://download.nvidia.com/developer/Tools/Melody/1.2/Me
lody_1.2.0630.1500.exe
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Blocks: 6912
Created an attachment (id=17548)
--> (http://bugs.winehq.org/attachment.cgi?id=17548)
+ole in git
err:ole:TLB_ReadTypeLib Loading of typelib L"C:\\Program Files\\Common
Files\\InstallShield\\Professional\\RunTime\\IsProBE.tlb" failed with error 2
+ole attached
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13027
Summary: Add a description field to winetest
Product: Wine
Version: CVS/GIT
Platform: Other
OS/Version: other
Status: NEW
Severity: enhancement
Priority: P2
Component: testcases
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fgouget(a)codeweavers.com
Depends on: 13026
It should be possible to specify a description for a winetest run. That
description field would be sent with the report and would describe the system
the tests are run on, providing details that cannot be retrieve
programmatically. For instance:
"US Windows XP system provided by Compaq and then cleaned up. Last updated on
2007/10/16 but no IE7."
or
"Clean install of a stock French Windows 95, running in a VMware 5.5 guest."
The user should be able to either enter this description in the main dialog
(see also bug 13026), or on the command line.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13028
Summary: winetest's Stop button does not work
Product: Wine
Version: CVS/GIT
Platform: Other
OS/Version: other
Status: NEW
Severity: enhancement
Priority: P2
Component: testcases
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fgouget(a)codeweavers.com
It says it's not implemented but closing the winetest window works just fine.
So it seems like implementing the Stop button should not be too hard.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11016
Summary: odbc32.dll should look for libodbc.so.1 instead of
libodbc.so
Product: Wine
Version: 20040615
Platform: PC
URL: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=259710
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: wine-misc
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ovek(a)arcticnet.no
An easy one for a newbie wine hacker, maybe... Currently, in
dlls/odbc32/proxyodbc.c, there's a hardcoded libodbc.so (unless an environment
variable overrides it). Perhaps it would be preferable if the WINE_GET_SONAME
configure macro was used to grab a name like libodbc.so.1 instead, so that if
some user have installed unixodbc, things would Just Work without forcing
him/her to also either install unixodbc-dev, or manually make a symlink, or
figure out weird environment variables.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13030
Summary: winetest and result logging / submission
Product: Wine
Version: CVS/GIT
Platform: Other
OS/Version: other
Status: NEW
Severity: enhancement
Priority: P2
Component: testcases
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fgouget(a)codeweavers.com
The winetest GUI does not make it possible to choose between saving the results
to a local file and submitting the results.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11177
Summary: winealsa doesn't assign unique MIDI port names
Product: Wine
Version: 20050628
Platform: PC
URL: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=333361
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: _obsolete_multimedia
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ovek(a)arcticnet.no
Currently, when mapping ALSA MIDI ports to Windows MIDI port names, winealsa
uses the port's client name, which is not unique and may cause some programs to
get confused. A user is suggesting using the ALSA port name, which I suspect
can be acquired by e.g. replacing snd_seq_client_info_get_name(cinfo) in midi.c
with snd_seq_port_info_get_name(pinfo). You could also append a number to the
client name, or whatever else it takes to make the name unique.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14607
Summary: Serious Sam TFE and TSE - window minimizes and becomes
unusable
Product: Wine
Version: CVS/GIT
Platform: PC
URL: http://files.seriouszone.com/download.php?fileid=338
OS/Version: Linux
Status: NEW
Keywords: download, regression
Severity: normal
Priority: P2
Component: winex11.drv
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: alexd4(a)inbox.lv
CC: julliard(a)winehq.org
In current git both "encounters" of Serious Sam 1 are regressed compared to
wine-0.9.59. When attempting to change video resolution in full screen mode (in
current git) the game's window becomes minimized and can't be restored after
that. It actually appears to change resolution successfully, but then there is
a "keep this settings yes/no" box and after pressing yes it breaks. This worked
in wine-0.9.59. The problem is in fullscreen mode only, in virtual desktop
emulation everything works.
I did some regression testing, and I think problems began with this commit:
commit fd97acbadffdc8af6d2682cb761a92ff2ab2f355
Author: Alexandre Julliard <julliard(a)winehq.org>
Date: Mon Apr 7 11:43:46 2008 +0200
winex11: Set the _NET_WM_STATE atom directly for unmapped windows.
It is a bit difficult, because the nature of the problem changed slightly
between the above commit and current git. I.e. in a commit just before
fd97acbadffdc8af6d2682cb761a92ff2ab2f355 it works, in
fd97acbadffdc8af6d2682cb761a92ff2ab2f355 a similar broken "minimization"
happens, only not after changing the resolution, but instead during game
initialization (you can't even get to the main menu). A bit later, a different
commit (1bf824e0b00d2b179d5f34dd0c7ace83e83bd28a) partially fixed the problem,
getting it to the state as it is now (can get to menu, but can't change
resolution). I tried backporting fix from
1bf824e0b00d2b179d5f34dd0c7ace83e83bd28a to commit
fd97acbadffdc8af6d2682cb761a92ff2ab2f355 and it works as expected, recreating
the problem in current form in that commit. In all of these cases only
fullscreen mode is affected.
I see this in Serious Sam - The First Encounter 1.05 (retail) and in Serious
Sam - The Second Encounter demo. Demo is available for download. If it will be
necessary I can generate some logs for this.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13029
Summary: winetest should make it possible to just extract the
individual tests
Product: Wine
Version: CVS/GIT
Platform: Other
OS/Version: other
Status: NEW
Severity: enhancement
Priority: P2
Component: testcases
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fgouget(a)codeweavers.com
The first task that winetest does is extract the individual test binaries.
However it does not say where and if one wants to get at them (to then run them
by hand for testing/debugging purposes), then one has to kill winetest, and
track down its temporary directory (which is something like in c:\Documents and
Settings\account\Local Settings\Temp\wctXXX btw).
It would be nice to have an 'Extract tests' button in the main dialog that
would open a dialog letting the user choose where to save the individual tests
(or some other reasonably simple way of achieving the same purpose).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10417
Summary: OLEAUT32: crash if >128 methods in an interface
Product: Wine
Version: 0.9.49.
Platform: Macintosh
OS/Version: Mac OS X 10.5
Status: UNCONFIRMED
Severity: normal
Priority: P1
Component: wine-ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mjk(a)cardbox.com
This bug was encountered in build cxoffice-6.2.0rc1-2-g024be42 of Wine (part of
CrossOver Mac). The bug has been identified in the current source code at
http://source.winehq.org/source/dlls/oleaut32/tmarshal.c.
Using any marshaled interface with more than 128 methods causes a crash within
OLEAUT32 if any method at position >=128 is called. This was detected when
using Cardbox (http://www.cardbox.com) and is a SHOW-STOPPER because it makes
the use of VBScript macros impossible.
However, the bug is completely general and applies to any application at all
that has interfaces with large number of methods. It is quite possible that
many random OLE / COM - related bugs that have already been reported have this
bug as their underlying cause.
The version of Cardbox on which the bug was found is more recent than the one
currently available on the web site. If anyone wants to have a copy for
testing, together with instructions for reproducing the crash, please contact
me.
LOCATION OF THE BUG
The bug is in dlls/oleaut32/tmarshal.c. When constructing a proxy interface,
PSFacBuf_CreateProxy at line #1712 constructs the following proxy code for each
method:
popl %eax
pushl <nr>
pushl %eax
call xCall
lret <n> (+4)
where <nr> is the position of the method in the list of methods: 0, 1, 2, and
so on.
The pushl <nr> instruction is defined by following code:
374 BYTE pushlval; // set to 0x6a by line #1712
375 BYTE nr;
The fact that the method position is a byte already limits the maximum size of
an interface to 256 methods, which is less than the 512-method limit of Windows
NT4.0 SP3, and the 1024-method limit of Windows 2000: see "MIDL2362" in
http://msdn2.microsoft.com/en-us/library/aa366756.aspx for details. Thus this
needs to be corrected in any case. The proxy code as it stands will call method
0 instead of method 256, method 1 instead of method 257, and so on, leading to
random behaviour and possible stack corruption.
The crash when method 128 is called has a different cause. The proxy for method
128 contains the instruction 6A 80, because the programmer thought that this
would push 00000080 onto the stack. In fact the PUSH instruction with opcode 6A
SIGN-EXTENDS its operand and does not zero-extend it. Thus the proxy for the
128th method pushes FFFFFF80 onto the stack before calling xCall. xCall
interprets this as a negative number (-128) and thus attempts to synthesize a
call not to method 128 but to a non-existent method -128. In the same way it
will call method -127 instead of method 129,... and so on.
SUGGESTED CORRECTION
The very simple correction to this bug, which is guaranteed to work, is to
alter line 375 to
375 DWORD nr;
and line 1712 to
1712 xasm->pushlval = 0x68;
which expects a 32-bit operand rather than an 8-bit one.
This will result in every proxy using 15 bytes per method instead of 12 bytes.
This does not seem an excessive price to pay for complete reliability in the
future: there will then be no limit to the number of methods that can be
supported.
ALTERNATIVE CORRECTIONS
If the 25% expansion in proxy size is considered unacceptable (it should not
really be: proxies are small) then there are several ways round the problem. An
increase to 256 methods could be achieved simply by adding a line at the very
beginning of xCall:
method &= 0xff;
but this would HAVE to be accompanied by an explicit test for the method count
limit (now 256) in PSFacBuf_CreateProxy so that the attempt to create a proxy
with too methods would simply fail rather than (as now) generate a proxy that
will randomly crash the application.
Another approach would be to create dummy functions (in assembler) that would
add 128, 256, 384, 512, etc to the 'method' argument before forwarding it on to
xCall. In that case, method numbers after 127 would generate proxies that
called one of the variant xCalls instead of the original one. The programming
in PSFacBuf_CreateProxy would be relatively straightforward, and the dummy
functions would not need to do any stack manipulation: they would simply add an
offset to the DWORD at [ESP+8] and then JMP straight to the start of xCall.
This would *still* give a finite limit to the number of methods, but the limit
would be much larger. Again, good engineering practice dictates that
PSFacBuf_CreateProxy should report an error if it encounters a number of
methods beyond the number that it was designed to cope with.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10536
Summary: ITypeInfo_fnInvoke failed to convert param 0 to VT_BOOL
from VT_BSTR
Product: Wine
Version: 0.9.49.
Platform: PC
URL: http://uniqlo.jp/uniqlock
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: wine-ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fnjordy(a)gmail.com
Uniqlock screensaver doesn't display anything, presumably it might be related
to the Wine output:
in CSoundUtils constructor:
fixme:win:WIN_CreateWindowEx Parent is HWND_MESSAGE
err:ole:ITypeInfo_fnInvoke failed to convert param 0 to VT_BOOL from VT_BSTR
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11775
Summary: Oleview does not correctly generate idl files
Product: Wine
Version: 0.9.56.
Platform: Other
OS/Version: other
Status: NEW
Severity: enhancement
Priority: P2
Component: ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: m.b.lankhorst(a)gmail.com
When looking at the ipodservice typelib (install itunes v7.6, then look at the
typelib in C:\Program Files\iPod Service\bin\iPodService.exe in wine oleview,
it will generate wrong code.
HRESULT foo([in]long pointer, [out, retval]VARIANT_BOOL *rar);
is turned into:
VARIANT_BOOL foo([in]long pointer);
This happens for example with IItunesDevice_IsMounted.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16841
Summary: Max Payne 2: The Fall of Max Payne installation fails
Product: Wine
Version: 1.1.12
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: drobyshewsky(a)gmail.com
Created an attachment (id=18557)
--> (http://bugs.winehq.org/attachment.cgi?id=18557)
Max Payne 2: The Fall of Max Payne installation fails
Max Payne 2: The Fall of Max Payne installation fails
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16851
Summary: Morrowind GOTY - DVD - Installers fail.
Product: Wine
Version: 1.1.12
Platform: Other
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kphillisjr(a)gmail.com
The installers all fail when launching ikernel.exe, and this is on a default
install of wine.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15384
Summary: Incorrect behaviour when using BIF_RETURNONLYFSDIRS |
BIF_BROWSEINCLUDEFILES
Product: Wine
Version: 1.0.0
Platform: All
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: shell32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: boris.seve(a)drillscan.com
When calling SHBrowseForFolder with both BIF_RETURNONLYFSDIRS and
BIF_BROWSEINCLUDEFILES flags the 'Ok' button is incorrectly disabled when a
file is selected (button is enabled however when a directory is selected)
If only the BIF_BROWSEINCLUDEFILES flag is set the 'Ok' button is correctly
enabled when a file is selected.
AFAIK (and confirmed on Windows XP SP3) the 'Ok' should be enabled when a
directory is selected AND when a file is selected if both flags are set.
This holds true whether BIF_NEWDIALOGSTYLE is set or not.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11096
Summary: Adobe AIR / Adobe Media Player pre 2 installer crashes
during MsiViewExecute
Product: Wine
Version: CVS/GIT
Platform: Other
OS/Version: other
Status: NEW
Keywords: download, Installer
Severity: normal
Priority: P2
Component: msi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
After working around bug 11094 by doing "wine regsvr32 rsaenh",
the next bug is a crash that is at least near
some MSI code, so I'll risk the MSI maintainer's wrath
and put it in that category :-)
To repeat:
download
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_play…
download http://download.macromedia.com/pub/labs/air/air_b3_win_121207.exe
download
http://download.macromedia.com/pub/labs/mediaplayer/adobemediaplayer_p2_122…
wineserver -k
rm -rf .wine
wine install_flash_player.exe
wine air_b3_win_121207.exe
wine regsvr32 rsaenh
wine ~/.wine/drive_c/Program\ Files/Common\ Files/Adobe\
AIR/Versions/1.0.6/Adobe\ AIR\ Application\ Installer.exe
adobemediaplayer_p2_122007.air
Crashes; +relay,+msi,+msidb,+seh seems to show the exception
happens in MsiViewExecute:
trace:msi:MSI_ViewExecute 0x171f40 0x18e3d0
trace:msidb:UPDATE_execute 0x172310 0x18e3d0
trace:msidb:SELECT_execute 0x1722d8 (nil)
trace:msidb:WHERE_execute 0x19db08 (nil)
trace:msidb:TABLE_execute 0x173268 (nil)
trace:msidb:TABLE_execute There are 2 columns
trace:msidb:TABLE_get_dimensions 0x173268 0x33e8c8 (nil)
0009:Call ntdll.RtlAllocateHeap(00110000,00000008,00000094) ret=7e3779f1
0009:Ret ntdll.RtlAllocateHeap() retval=0018dba0 ret=7e3779f1
trace:seh:raise_exception code=c0000005 flags=0 addr=0x7e35f539
I'll attach a full log.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11094
Summary: Adobe AIR can't install Adobe Media Player pre 2
Product: Wine
Version: CVS/GIT
Platform: Other
OS/Version: other
Status: NEW
Keywords: download, Installer
Severity: normal
Priority: P2
Component: crypt32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
This is the next bug after bug 10956.
To reproduce, run the script
http://bugs.winehq.org/attachment.cgi?id=9893
Adobe media player prerelease 2,
http://labs.adobe.com/technologies/mediaplayer/install/
install fails.
It's kind of hard to tell, but I suspect it might be that
a crypto provider wasn't found:
trace:crypt:CryptAcquireContextW Did not find registry entry of crypto provider
for L"Software\\Microsoft\\Cryptography\\Defaults\\Provider Types\\Type 001".
... 49000 lines deleted ...
001d:Call gdi32.GetTextExtentPoint32A(00000314,006722f8 "The application could
not be installed because the AIR file is damaged. Try obtaining a new AIR
file",00000064,0033eff4) ret=1027b8cc
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15951
Summary: Origin Pro 6.1 / 7.5 / 8.0 - Dialog in contour-plots
unreachable
Product: WineHQ Bugzilla
Version: unspecified
Platform: Other
URL: http://www.originlab.com/
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: bugzilla-unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: frederik(a)ietsmet.nl
In Origin Pro 6.1 / 7.5 / 8.0 the dialog for auto-spacing of levels, colors or
linestyles in contour-plots is unreachable.
I followed the tricks given in AppDB to get it to run in the first place: set
dll's msxml3 and msxml3r to native.
Error on the terminal is:
fixme:storage:StgCreateDocfile Transacted mode not implemented.
Steps to reproduce:
1) Create new matrix
2) menu: Matrix -> Set matrix values -> enter "cos(i/4)*cos(1/2)" (or any other
formula giving some nice contour lines) as value for cell(i,j)= -> OK
3) Create new contour plot via menu: Plot -> Contour plot -> Contour - B/w
Lines + Labels
4) Double-click in the middle of the contour plot -> a dialog Plot Details
appears.
5) try to click on one of the headings Levels / Fill / Line / Labels.
In Windows XP you get a new dialog allowing you to set min / max / # of levels
in either linear or exponential spacing (for the Levels-heading-dialog).
In Wine 1.0.1 this dialog does NOT appear at all and the error message above
appears on the terminal window.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15253
Summary: Bitmap Font Problem
Product: Wine
Version: 1.1.4
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: fonts
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: giuseppe.adamo(a)gmail.com
Created an attachment (id=16039)
--> (http://bugs.winehq.org/attachment.cgi?id=16039)
Bitmap Font Test Program
I am actually trying to run under Linux a VB6 windows application for CNC
operators.
Everything works fine, but I have found a problem when using bitmap fonts
(tipically a .FON file type).
It seems that only one character is printed to the screen, the char that is
defined as the 'Default char' in the bitmap font header.
I simplified the problem writing a really small VB6 application that only calls
the font dialog using COMDLG32.OCX.
As you can see, even the standard dialog, when pointing to my font (WTerms1x),
prints the test string using only one character.
To setup the wine environment to run my application:
1) Extract the attached .zip archive (BitmapFonts.zip) in a directory of your
choice.
2) Copy the COMDLG32.OCX control in: ~/.wine/drive_c/windows/system32
3) Point to the above directory and register the activeX control by typing:
regsvr32 ./COMDLG32.OCX
4) Copy the SINGOLO.FON font file in: ~/.wine/drive_c/windows/Fonts
5) Run the registry editor by typing 'wine regedit'
6) Register the SINGOLO.FON font so that wine can see it. Point to
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts
7) Add a string key named WTerms1x with the value: C:\Windows\Fonts\SINGOLO.FON
Now, from the directory where you extracted BitmapFonts.zip, run the command:
wine BMPFontTest.exe then press the button on the main form.
If the font SINGOLO.FON has been correctly registered, you should see the
standard windows font dialog pointing to the font WTerms1x.
Taking a look at the example text in the dialog, you should notice that the
test string is composed all of the same (wrong) character.
To verify that the .FON file is correct and that probably wine prints only the
'Default char', I have included a bitmap font utility, Fony,
that can help you verify the font and change/check the 'Default char'
attribute.
Fony is freeware and can be downloaded from http://hukka.furtopia.org/
I hope for a reply since that problem 'IS A PROBLEM' for my application.
In the meanwhile ... VIVA WINE !!! :D
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14290
Summary: winhelp: temporary 100% CPU use when loading some help
files
Product: Wine
Version: 1.1.0
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: programs
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: markk(a)clara.co.uk
When loading some help files, Wine winhelp appears to hang for a while with
100% CPU use.
To demonstrate, download quenzar.hlp from
http://bugs.winehq.org/attachment.cgi?id=14572
and load into Wine winhelp.
CPU usage goes to 100% for about a minute (on my old slow PC), but the help
window does open eventually. There is no delay when opening the same file with
the Windows 95 WINHLP32.EXE under Wine.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17310
Summary: Window looses its top returning from fullscreen and is
undragable from normal means
Product: Wine
Version: 1.1.14
Platform: PC-x86-64
URL: http://appdb.winehq.org/objectManager.php?sClass=version
&iId=11696
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P4
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: james.jrp015(a)gmail.com
When <alt-Enter> is used from fullscreen, the window appears in the upper left
and looses the top of the window(cannot drag with mouse noramlly).
It will drag if you hold down alt however.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.