http://bugs.winehq.org/show_bug.cgi?id=12164
Summary: Two issues trying to run Paint.NET
Product: Wine
Version: 0.9.58.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: kernel32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: tinivole(a)hotmail.co.uk
1)IsWow64Process is not implemented properly in the kernel32.dll
2)MEM_WRITE_WATCH is not supported by NtAllocateVirtualMemory in the ntdll.dll.
I am only guessing, this was echoed on my first run in 0.9.58 with Paint.NET
3.0.
fixme:actctx:parse_depend_manifests Could not find dependent assembly
L"Microsoft.VC80.CRT"
fixme:actctx:parse_depend_manifests Could not find dependent assembly
L"Microsoft.VC80.CRT"
fixme:process:IsWow64Process (0xffffffff 0x34f634) stub!
fixme:virtual:NtAllocateVirtualMemory MEM_WRITE_WATCH type not supported
fixme:actctx:parse_depend_manifests Could not find dependent assembly
L"Microsoft.VC80.CRT"
fixme:actctx:parse_depend_manifests Could not find dependent assembly
L"Microsoft.VC80.CRT"
Also if anyone knows how to get the VC Runtime installed on wine, I think that
will solve the other problem with the "VC80.CRT" error.
Regards
Iain
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16630
Summary: Paint.NET 3.36 installer does not show any content in
window with Mono 2.0
Product: Wine
Version: 1.1.11
Platform: Other
OS/Version: other
Status: NEW
Keywords: download, Installer
Severity: enhancement
Priority: P2
Component: gdiplus
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: scott(a)open-vote.org
Using winetricks to install Mono 2.0, and then attempting to install Paint.Net
results in a blank window with just a title bar. These 3 fixmes are printed
once in the console:
fixme:gdiplus:GdipSetStringFormatFlags format (0x11bcc10) flags (4096)
fixme:gdiplus:GdipGetImagePaletteSize 0x1237d20 0x60f7f8
fixme:gdiplus:GdipSetStringFormatFlags format (0x124ba08) flags (8192)
Download here: http://www.getpaint.net/download.html
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13779
Summary: Paint.net: setup: Unhandled Exception:
System.IO.FileLoadException: Could not load file or
assembly 'SetupFrontEnd ...
Product: Wine
Version: 1.0-rc4
Platform: Other
URL: http://www.dotpdn.com/files/Paint.NET.3.31.zip
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mscoree
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: baryluk(a)smp.if.uj.edu.pl
Created an attachment (id=13815)
--> (http://bugs.winehq.org/attachment.cgi?id=13815)
debug log
Both Paint.net 3.31 and 3.35 Beta, throws this exceptions when installing.
Log attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17987
Summary: Regression : Autocad toolbars mis-sized
Product: Wine
Version: unspecified
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: comctl32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: max(a)veneto.com
CC: tarasov.igor(a)gmail.com
Following patch :
2d751ee56afced908d0788b936fa4aac1b29f1a1 is first bad commit
commit 2d751ee56afced908d0788b936fa4aac1b29f1a1
Author: Igor Tarasov <tarasov.igor(a)gmail.com>
Date: Mon Mar 30 21:08:18 2009 +0500
comctl32: Correct handling of toolbar separators size.
:040000 040000 e6b2c5fbb8f61bebfa986286ec302ff2fc7dee7e
74cdeeec62833cd80f9a885599b46a9c7ef6e9e9 M dlls
broke some AutoCAD toolbars, which becomes too small sized horizontally (in
particular, layer toolbar).
Ciao
Max
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18008
Summary: Incorrect Toolbar - Messed up symbols - Not clickable
windows - crashing application
Product: Wine
Version: 1.1.19
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hufux(a)gmx.de
Foxit 3.0 build 1506 + wine 1.1.19
> Find-toolbar (Strg-F) is not displayed correctly => blind searching :(
> Enhanced-Find-Toolbar (Strg-Shift-F) is not usable => Search results are not clickable
> If fixing the Find-Toolbar (Strg-F) with winetricks (install comctl32) the application crashes when switching a couple of folders in the open/saveas-file dialog. Also some icons in that dialogs are messed up (displayed totaly black)
Therefore this absolutely great tool is not usable :(. What is a PDF worth if
you can't search it and the application is crashing on opening/saving files.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9869
Summary: Tornado 2.2.1: Unhandled exception code 80000003
Product: Wine
Version: CVS/GIT
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-msvcrt
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: nick.couchman(a)seakr.com
Whenever I try to run Wind River Tornado 2.2.1 on Wine I get the following
messages:
fixme:dbghelp_msc:pe_load_debug_directory This guy has FPO information
err:syslevel:_EnterSysLevel (0x7ee220e0, level 2): Holding 0x7ed0eda0, level 3.
Expect deadlock!
err:syslevel:_EnterSysLevel (0x7ee220e0, level 2): Holding 0x7ed0eda0, level 3.
Expect deadlock!
err:syslevel:_CheckNotSysLevel Holding lock 0x7ed0eda0 level 3
err:seh:raise_exception Unhandled exception code 80000003 flags 0 addr
0x7b8888c0
and the application completely crashes. I've attached a (gzipped) trace log
using "WINEDEBUG=+relay wine..." to run the application. I've also attached
the output from winedbg at the point where the program crashes. I will be
happy to provide more info if needed.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10136
Summary: WinMerge does not work with wine
Product: Wine
Version: 0.9.46.
Platform: PC
OS/Version: Windows 2000
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: wine-kernel
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: noragen(a)gmx.net
Created an attachment (id=8713)
--> (http://bugs.winehq.org/attachment.cgi?id=8713)
wine-winmerge-Error.log
attached a error log.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9370
Summary: coreftp crashes at startup
Product: Wine
Version: CVS
Platform: PC
URL: http://www.coreftp.com/
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: wine-x11driver
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: thestig(a)google.com
Created an attachment (id=7666)
--> (http://bugs.winehq.org/attachment.cgi?id=7666)
backtrace
I tried out Coreftp LE 2.0. It installs fine, but crashes on startup after
showing a splash screen.
On the initial run, it asks whether to set coreftp as the default ftp client,
and whether to use notepad to view ascii files. I answered no to both.
I don't have a copy of Windows handy to make sure it works there.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14336
Summary: BCG Tooltips dont dispaly correctly
Product: Wine
Version: 1.1.0
Platform: Other
URL: http://www.bcgsoft.com/download.htm
OS/Version: other
Status: NEW
Keywords: download
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: leslie_alistair(a)hotmail.com
Downlaod the "BCGControlBar Professional Edition demonstration"
Run the TooltipDemo.exe example
Using the third radio option "Use Custom Tooltip with Parameters", the button
tooltips are cut off when displayed.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17848
Summary: Windows Print Preview: Lines drawn have incorrect width
Product: Wine
Version: 1.1.17
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: olsentest(a)comcast.net
In Windows print preview, drawing commands embedded
between BeginPath and EndPath have line widths that
are way too wide. It appears that the same width
(in pixels) is used in the print preview as was used
for the main application window. Also, if you use
the print preview zoom button, the line width remains
the same, suggesting that it is not being adjusted
for the changes in scale.
If drawing commands are not embedded between BeginPath
and EndPath, then the print preview appears to work
correctly.
I am attaching a screen capture of the main window and
the print preview window. Also, I am attaching a
simple Windows program that can be used for debug
purposes. Also attached is a code snippet from the
Windows program.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14550
Summary: MS Ink demo program fails
Product: Wine
Version: 1.1.1
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bcw1000(a)yahoo.com
Created an attachment (id=14898)
--> (http://bugs.winehq.org/attachment.cgi?id=14898)
shell script to set up the environment & run the program
Microsoft provides sample applications for use with their Tablet SDK.
I am running a sample that allows basic ink writing and recognition under
Wine-1.1.1.
For it to work, InkObj.DLL and Wisptis.exe binaries are required. I install
them via the Microsoft Windows Journal Viewer. InkObj requires unimplemented
functions of GdiPlus, so I install it using winetricks.
Also some text recognizer must be installed. I own Tablet XP (1 license) so I
copy a recognizer dll and another required file from my XP partition to ~/.wine
and register them.
Now when I launch "BasicRecognition.exe", it fails in it's initialization
sequence (judging by the source code) and gives me some output.
The Installation script and output log are attached.
Seems to be some OLE (or RPC) problems as several are mentioned in the output.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15256
Summary: Disabling OpenGL output in WinUAE causes crash, possibly
in x11drv_main
Product: Wine
Version: 1.1.4
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: winex11.drv
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: markk(a)clara.co.uk
Created an attachment (id=16046)
--> (http://bugs.winehq.org/attachment.cgi?id=16046)
Console output on crash
WinUAE is an open source (GPL) emulator of Amiga computers, available from
http://www.winuae.net/.
The output of WinUAE can be rendered using DirectDraw (default), Direct3D or
OpenGL. If WinUAE is set to use OpenGL, disabling the output filter (which
reverts to DirectDraw output) causes WinUAE to crash.
The console output on crashing begins:
fixme:dbghelp:dump_system_info fill in CPU vendorID and feature set
err:ntdll:RtlpWaitForCriticalSection section 0x7d1da4c0 "x11drv_main.c:
X11DRV_CritSection" wait timed out in thread 0019, blocked by 0009, retrying
(60 sec)
wine: Unhandled page fault on read access to 0x000005e0 at address 0x7edfcaa9
(thread 0009), starting debugger...
To demonstrate:
- Run WinUAE
- Select a disk image for drive DF0: in the Floppy drives page, e.g.
rsi1.adf.gz from ftp://ftp.coresystems.de/pub/uae/rsi1.adf.gz
- In the filter page, check the Enable box and select the OpenGL filter.
- Click OK to start the emulation.
- After a few seconds press F12 to bring up the settings window.
- In the Filter page, uncheck the Enable box.
- To work around Wine bug 10643, click in the main window and press F12.
- Click OK to dismiss the settings window. WinUAE crashes.
Attached is the console output on crashing. I can attach a minidump file if
needed.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19086
Summary: Front Panel Designer: crashes when trying to load
saved files
Product: Wine
Version: 1.1.24
Platform: PC
URL:
http://www.schaeffer-ag.de/en/download/front-panel-des
igner.html
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dariuskellermann(a)gmx.de
The application crashes (displays error message, becomes unresponsive, error
message cannot be clicked) when trying to load a previously saved front panel
file.
Terminal displays no output(none at all).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14132
Summary: Incorrect Font Displayed After Install
Product: Wine
Version: 1.0.0
Platform: PC
URL: see Description
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdi32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: pbronline-wine(a)yahoo.co.uk
Occurs with Corel WordPerfect Office X3 and WordPerfect Office 12.
Start installer. Note font (print snapshot or whatever). Install application,
Quit installer. Start installer again. Font displayed is different.
With WordPerfect Office X3, the effect is obvious as the 'wrong' font is a
symbol font. With WordPerfect Office 12, the 'wrong' font is very narrow (I
think this may have previsouly been reported as <<poor rendering>>).
Problem affects not just the installers but also service packs and the
applications themselves (particularly Presentations). I would expect it
affects all installed applications.
To confirm the problem ...
1. remove all references to Corel installed fonts from system.reg which ever
way you choose but the following works:
cd .wine
mv system.reg system.reg~
sed -e '/TrueType.*C:.*\.TTF/d' -e '/TrueType.*C:.*\.ttf/d' system.reg~ >
system.reg
2. move Corel installed fonts to one side for a moment:
mv drive_c/windows/Fonts drive_c/windows/Fonts.wpo
mkdir drive_c/windows/Fonts
3. Start installer. Font is back to what is was before installation. Quit
installer.
3. Put back a bad font:
cp -p drive_c/windows/Fonts.wpo/WPCO03N_.TTF drive_c/windows/Fonts
4. Start installer. Symbol font makes screen indecypherable.
5. Try other fonts. Not all override the 'good' font. MTEXTRA.TTF and
WPHV04N_.TTF do.
Downloads ?
WordPerfect Office X3:
http://www.corel.com/servlet/Satellite?pagename=uk/ProcessLayout&lc=en&ppg=…
Professional (aka not Trial) Edition is 'fun' to install. See bug 14106.
WordPerfect Office 12:
Not available for download anymore as far as I can tell. Perhaps one of the
nice people who contributed to bug 2547 can help.
Standard (aka not Trial) Edition installs nicely under Wine 1.0.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11081
Summary: Windows Genuine Advantage Tool crashes on launch
Product: Wine
Version: 0.9.52.
Platform: Other
URL: http://www.microsoft.com/genuine/downloads/Validate.aspx
?displaylang=en&sGuid=68d69b53-5057-4179-b72b-
dfb1e12854f2
OS/Version: other
Status: NEW
Keywords: download, Installer
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=10101)
--> (http://bugs.winehq.org/attachment.cgi?id=10101)
Terminal output in wine 0.9.52
Windows Genuine Advantage Tool crashes on launch. While obviously not a very
important program to us, it should still run (and fail validation). Backtrace
attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17342
Summary: Adobe acrobat 5 crash after a splash screen
Product: Wine
Version: 1.1.14
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: last_deceneu(a)yahoo.com
Created an attachment (id=19377)
--> (http://bugs.winehq.org/attachment.cgi?id=19377)
crash log of acrobat 5
Acrobat is the only reason that I use wine. I seen that only version 5 of
acrobat is working on wine. Currently I updated my suse linux from 11.0 to
11.1. On suse 11.1 I installed wine 1.1.14 and it crashed after displaying a
splash screen, it krash also with 1.1.9. On previous version of suse 11.0 I
used wine 0.9 and worked fine.
I installed acrobat in a clean wine and with winetricks I installed mfc42 and
vcrun2008.
Please give some instructions how to make it work.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13925
Summary: Ikea home planer 2D and 3D graphical views show only
garbage
Product: Wine
Version: 1.0-rc4
Platform: PC
URL: http://www.ikea.com/ms/de_DE/rooms_ideas/splashplanners.
html
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wine(a)zorglub.s.bawue.de
Created an attachment (id=14043)
--> (http://bugs.winehq.org/attachment.cgi?id=14043)
section of .xsession-errors while IPH was running.
Hello,
the actual version of Wine is 1.0-rc5 but it's not listed yet.
This bug is related to test
http://appdb.winehq.org/objectManager.php?sClass=version&iId=11720&iTesting…
There is not much to add to what I've written there actually, so copy&paste:
Application installs and starts, but all graphical views are completely garbled
(2D and 3D, like a TV without channel), the menus and icons seem to work and do
something but I can't see anything.
# Graphical configuration
Section "Device"
Identifier "Intel Corporation 82Q963/Q965 Integrated Graphics
Controller"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
# glxinfo
[...]
direct rendering: Yes
[...]
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 965Q 4.1.3002 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.0.3-rc2
[...]
I also attach my .xsession-errors (the part related to when the Ikea program
was running.
Let me know if you need more.
Thanks, Eric
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16882
Summary: WMI core 1.5 installation hangs (needed for .NET 3.0
installer, WCF part), SECURITY_SERVICE_RID missing from
service token group
Product: Wine
Version: 1.1.12
Platform: Other
URL: http://www.microsoft.com/downloads/details.aspx?familyid
=AFE41F46-E213-4CBF-9C5B-FBF236E0E875
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: advapi32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
after getting past bug 16879 one encounters this one.
----
Prerequisite:
1. clean WINEPREFIX
2. sh winetricks -q dotnet20
3. download .NET 3.0 Framework installer from: http://download.microsoft.com
/download/4/d/a/4da3a5fa-ee6a-42b8-8bfa-ea5c4a458a7d/dotnetfx3setup.exe
(sha1sum:
a566bcd2ffffc3842a95adc57f7df3f8cd11577f)
4. export _SFX_CAB_SHUTDOWN_REQUEST=1 (workaround, see bug 9158)
5. wine ./dotnetfx3setup.exe
It might take a while until all required packages are downloaded using BITS.
Note: If you need to redo steps, backup the directory "dotnetfx304506.30" from
"c:\\windows\\temp" to a different location, remove ~/.wine, copy
"dotnetfx304506.30" again to "c:\\windows\\temp" to prevent BITS from
downloading over and over again.
----
"c:\\windows\\temp\\dd_dotnetfx3error.txt":
--- snip ---
[01/11/09,12:50:20] Windows Communication Foundation: [2] Error: Installation
failed for component Windows Communication Foundation. MSI returned error code
1603
[01/11/09,12:50:31] WapUI: [2] DepCheck indicates Windows Communication
Foundation is not installed.
[01/11/09,12:50:31] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0
was not attempted to be installed.
--- snip ---
"c:\\windows\\temp\\dd_wcf_retMSI597F.txt":
--- snip ---
1: C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\ServiceModelReg.exe /r /x /y /v 2:
1: ERROR: Process returned non-0 value! CMDLINE:
C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\ServiceModelReg.exe /r /x /y /v 2:
1: Failed 2:
--- snip ---
and "c:\\windows\\temp\\dd_wcf_retCA69A1.txt":
--- snip ---
=== Verbose logging started: 1/11/2009 12:50:17 Calling process:
C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\ServiceModelReg.exe ===
ServiceModelReg [12:50:18:302]: Warning: Could not detect IIS installation or
IIS is disabled, skipping the Web Host Script Mappings component since it
depends upon IIS to function properly.
If you believe this message is an error, check your IIS installation to make
sure it is installed properly.
ServiceModelReg [12:50:18:329]: Information: The ServiceModelReg tool will take
the following actions:
Reinstalling configuration section system.serviceModel to
C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config.
Reinstalling configuration section system.runtime.serialization to
C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config.
Reinstalling configuration section system.serviceModel.activation to
C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config.
Adding configuration entry for BuildProvider:
System.ServiceModel.Activation.ServiceBuildProvider,
System.ServiceModel, Version=3.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089
Reinstalling compilation assembly node to System.Web section group:
System.Runtime.Serialization, Version=3.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL
Reinstalling compilation assembly node to System.Web section group:
System.IdentityModel, Version=3.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089, processorArchitectur...
ServiceModelReg [12:50:18:358]: Uninstalling: Machine.config Section Groups and
Handlers
ServiceModelReg [12:50:18:366]: Warning: Configuration section
system.serviceModel does not exist in
C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config.
ServiceModelReg [12:50:18:369]: Warning: Configuration section
system.runtime.serialization does not exist in
C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config.
ServiceModelReg [12:50:18:373]: Warning: Configuration section
system.serviceModel.activation does not exist in
C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config.
ServiceModelReg [12:50:18:374]: Installing: Machine.config Section Groups and
Handlers
ServiceModelReg [12:50:18:893]: Uninstalling: System.Web Build Provider
ServiceModelReg [12:50:19:095]: Warning: A configuration entry for
BuildProvider System.ServiceModel.Activation.ServiceBuildProvider,
System.ServiceModel, Version=3.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089 does not exist.
ServiceModelReg [12:50:19:096]: Installing: System.Web Build Provider
ServiceModelReg [12:50:19:138]: Uninstalling: System.Web Compilation Assemblies
ServiceModelReg [12:50:19:153]: Warning: All compilation assembly nodes do not
exist in System.Web section group.
ServiceModelReg [12:50:19:154]: Installing: System.Web Compilation Assemblies
ServiceModelReg [12:50:19:246]: Uninstalling: HTTP Handlers
ServiceModelReg [12:50:19:260]: Warning: HttpHandlers node *.svc does not exist
in System.Web section group.
ServiceModelReg [12:50:19:261]: Installing: HTTP Handlers
ServiceModelReg [12:50:19:322]: Uninstalling: HTTP Modules
ServiceModelReg [12:50:19:333]: Warning: HttpModules node ServiceModel does not
exist in System.Web section group.
ServiceModelReg [12:50:19:334]: Installing: HTTP Modules
ServiceModelReg [12:50:19:365]: Repairing: WMI Classes
ServiceModelReg [12:50:19:396]: Warning: Failure executing
"C:\windows\system32\wbem\mofcomp.exe" with parameters
""C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\ServiceModel.mof"": System.IO.FileNotFoundException: Could not load
file or assembly 'C:\windows\system32\wbem\mofcomp.exe' or one of its
dependencies. Exception from HRESULT: 0x80070002
File name: 'C:\windows\system32\wbem\mofcomp.exe'
at System.ServiceModel.Install.InstallHelper.ExecuteWaitHelper(String
program, String parameters)
at System.ServiceModel.Install.InstallHelper.ExecuteWait(String program,
String parameters, Int32[] allowedExitCodes)
at System.ServiceModel.Install.WmiInstallComponent.OnInstall(OutputLevel
outputLevel)
ServiceModelReg [12:50:19:516]: System.InvalidCastException: Retrieving the COM
class factory for component with CLSID {4590F811-1D3A-11D0-891F-00AA004B2E24}
failed due to the following error: 80004002.
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementScope.Connect()
at System.ServiceModel.Install.WmiInstallComponent.get_IsInstalled()
at
System.ServiceModel.Install.WmiInstallComponent.ApplyNamespaceDacl(OutputLevel
outputLevel)
at System.ServiceModel.Install.WmiInstallComponent.OnInstall(OutputLevel
outputLevel)
at System.ServiceModel.Install.WmiInstallComponent.Reinstall(OutputLevel
outputLevel)
at Microsoft.Tools.ServiceModel.ServiceModelReg.PerformAction(ActionItem
actionItem, Nullable`1 confirmUninstall)
at Microsoft.Tools.ServiceModel.ServiceModelReg.Run(String[] args)
at Microsoft.Tools.ServiceModel.ServiceModelReg.TryRun(String[] args)
=== Verbose logging stopped: 1/11/2009 12:50:19 ===
--- snip ---
Oh joy ... WMI.
Providing fake mofcomp.exe (returning success) is not enough, WCF installer
will try *use* WMI hence there needs to be some working infrastructure:
--- snip ---
ServiceModelReg [19:37:29:832]: Starting tool
'C:\windows\system32\wbem\mofcomp.exe' with parameters
'"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\ServiceModel.mof"'.
ServiceModelReg [19:37:29:895]:
ServiceModelReg [19:37:29:896]:
ServiceModelReg [19:37:29:897]: Tool 'C:\windows\system32\wbem\mofcomp.exe'
with parameters '"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\ServiceModel.mof"' exited with code '0'.
ServiceModelReg [19:37:29:955]: System.InvalidCastException: Retrieving the COM
class factory for component with CLSID {4590F811-1D3A-11D0-891F-00AA004B2E24}
failed due to the following error: 80004002.
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementScope.Connect()
at System.ServiceModel.Install.WmiInstallComponent.get_IsInstalled()
at
System.ServiceModel.Install.WmiInstallComponent.ApplyNamespaceDacl(OutputLevel
outputLevel)
at System.ServiceModel.Install.WmiInstallComponent.OnInstall(OutputLevel
outputLevel)
at System.ServiceModel.Install.WmiInstallComponent.Reinstall(OutputLevel
outputLevel)
at Microsoft.Tools.ServiceModel.ServiceModelReg.PerformAction(ActionItem
actionItem, Nullable`1 confirmUninstall)
at Microsoft.Tools.ServiceModel.ServiceModelReg.Run(String[] args)
at Microsoft.Tools.ServiceModel.ServiceModelReg.TryRun(String[] args)
=== Verbose logging stopped: 1/8/2009 19:37:29 ===
--- snip ---
This is a big blocker and getting WMI to work with Wine is imperative for .NET
3.0 and higher.
Of course this also useful for older .NET Frameworks
Roll-back, prepare clean WINEPREFIX again;-)
We need to install native WMI core 1.5 from:
http://www.microsoft.com/downloads/details.aspx?familyid=AFE41F46-E213-4CBF…
Download wmicore
http://download.microsoft.com/download/platformsdk/wmicore/1.5/W9XNT4/EN-US…
(sha1sum: f7a36668eb6c82a28393637ffdf0ec6e8adfa6a1)
Make sure you set winver to NT 4.0 (don't forget to reset to default) and
execute the installer (I already have my own winetricks step for this):
--- snip ---
wine wmicore.exe
--- snip ---
The installer will then hang at some point "Configuring repository".
With winedbg one can see following processes:
--- snip ---
Wine-dbg>info process
pid threads parent executable (all id:s are in hex)
0000000c 5 0000000a 'services.exe'
0000000f 1 0000000a 'explorer.exe'
0000001b 4 0000000c 'winedevice.exe'
00000025 1 00000000 'wmicore.exe'
00000027 2 00000025 'GLBbab.tmp'
00000022 4 0000000c 'WinMgmt.exe'
--- snip ---
The problem is "WinMgmt.exe" which ought to be a service but due to Wine
insufficiency the service thinks it's a normal process not showing usual
service process behaviour as registering control handler and the like.
If you do 'wineserver -k' and try to start anything with Wine nothing will
happen until wineboot times out...
As quickfix, start regedit (wait until wineboot timeout) and set service start
type key for "WinMgmt" to manual start, e.g. "2" -> "3".
Also a kernel driver (service) that is installed with WMI "smbios" fails to
load but this currently harmless.
If we look now in "c:\\windows\\system32\\WBEM" we see the whole stuff
installed.
The logs in "logs" subdirs are not revealing much so we have to increase the
log level:
--- snip ---
[HKEY_LOCAL_MACHINE\Software\Microsoft\WBEM\CIMOM]
"Logging"="1"
"Logging Directory"="C:\\windows\\system32\\WBEM\\Logs"
--- snip ---
LogLevel is 0 to turn off logging, a 1 to turn on logging, and a 2 for verbose
logging.
After that, we manually try to start the service:
--- snip ---
$ wine net start winmgmt
err:winedevice:ServiceMain driver L"smbios" failed to load
The Windows Management Instrumentation service is starting.
fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),2,2,(nil),32,(nil)) -
stub!
fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),1,3,(nil),0,(nil)) - stub!
fixme:advapi:RegisterEventSourceW (L"",L"WinMgmt"): stub
wine: Call from 0x7b844f54 to unimplemented function
ole32.dll.CoSwitchCallContext, aborting
err:rpc:I_RpcReceive we got fault packet with status 0x80000100
fixme:ole:CoCreateInstance no instance created for interface
{00000000-0000-0000-c000-000000000046} of class
{8bc3f05e-d86b-11d0-a075-00c04fb68820}, hres is 0xc0000005
--- snip ---
This is bug 7187
After fixing this problem, we repeat the whole stuff again to get this in logs:
--- snip ---
(Sun Jan 11 13:41:41 2009) :
Starting WinMgmt, ProcID = 26, CmdLine = , User = focht(Sun Jan 11 13:41:41
2009) :
WinMgmt bIsService = 0, return code from function determining if service =
0(Sun Jan 11 13:41:41 2009) :
WinMgmt gbRunAsApp = 1(Sun Jan 11 13:41:41 2009) :
Starting Initialize, ID = 26(Sun Jan 11 13:41:41 2009) :
Registered class factory with flags: 0x15
(Sun Jan 11 13:41:41 2009) :
RegOpenKey returned 0x2 while trying to open the transports node. Using
default transports!(Sun Jan 11 13:41:41 2009) :
Initialize complete(Sun Jan 11 13:41:41 2009) :
WindowProc got hWnd=20026, message=24, wParam=0, lParam=33f814(Sun Jan 11
13:41:41 2009) :
WindowProc got hWnd=20026, message=81, wParam=0, lParam=33fce8(Sun Jan 11
13:41:41 2009) :
WindowProc got hWnd=20026, message=83, wParam=0, lParam=33f974(Sun Jan 11
13:41:41 2009) :
WindowProc got hWnd=20026, message=1, wParam=0, lParam=33fce8(Sun Jan 11
13:41:41 2009) :
Inside the waiting function
--- snip ---
"WinMgmt bIsService = 0" is the culprit.
The process retrieves token information and checks if process token groups
contain "SECURITY_INTERACTIVE_RID" (-> normal process) or
"SECURITY_SERVICE_RID" (service process).
I think it's actually services.exe that adds the SECURITY_SERVICE_RID sid to
the newly created service process (token groups).
This requires some infrastructure, including wineserver.
I already quick-hacked a path to verify this and it works as expected, letting
the service successfully start ;-)
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11970
Summary: graphic bug with 0.9.57 in serius sam - the second
encounter
Product: Wine
Version: 0.9.57.
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jb.faq(a)gmx.de
Created an attachment (id=11299)
--> (http://bugs.winehq.org/attachment.cgi?id=11299)
graphic bug: a look throug hills
Hi,
with the new version 0.9.57 of wine the graphic rendering in Serious Sam - The
Second encounter breaks. You can look through hills, walls or the earth. I'll
upload a screeshot in some few minutes, because it describe the error in the
best way.
Greetings
Jan
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19102
Summary: Don`t install 3D Studio Max 9
Product: Wine
Version: 1.1.24
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: patsev.anton(a)gmail.com
Don`t install 3D Studio Max 9.
Installation ended prematurely because of an error
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18296
Summary: DInput has issues with KDE4.2 keyboard input repeat.
Product: Wine
Version: 1.1.20
Platform: PC-x86-64
URL: http://www.coh.com
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-dinput
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wine(a)eternaldusk.com
After upgrading to Kubuntu Jaunty, City of Heroes characters show a horrible
staggering when you try move consistently in any direction. The character
animation resets at the interval equivalent to the keyboard delay.
So, it's as if the application is seeing you press the key over and over -
instead of holding it down.
Turning off keyboard repeat in the system options eliminates this issue.
Modifying the delay only slows the initial staggering.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16879
Summary: .NET 3.0: XPSEPSC installer fails due to unimpl
kernel32.RtlCaptureStackBackTrace
Product: Wine
Version: 1.1.12
Platform: Other
URL: http://www.microsoft.com/downloads/details.aspx?FamilyID
=10cc340b-f857-4a14-83f5-25634c3bf043
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: kernel32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
after getting past bug 16878 one runs into next one.
Prerequisite:
1. clean WINEPREFIX
2. sh winetricks -q dotnet20
3. download .NET 3.0 Framework installer from: http://download.microsoft.com
/download/4/d/a/4da3a5fa-ee6a-42b8-8bfa-ea5c4a458a7d/dotnetfx3setup.exe
(sha1sum:
a566bcd2ffffc3842a95adc57f7df3f8cd11577f)
4. export _SFX_CAB_SHUTDOWN_REQUEST=1 (workaround, see bug 9158)
5. wine ./dotnetfx3setup.exe
It might take a while until all required packages are downloaded using BITS.
Note: If you need to redo steps, backup the directory "dotnetfx304506.30" from
"c:\\windows\\temp" to a different location, remove ~/.wine, copy
"dotnetfx304506.30" again to "c:\\windows\\temp" to prevent BITS from
downloading over and over again.
--- snip ---
fixme:advapi:RegisterEventSourceW
((null),L"Microsoft-Windows-SpoolerFilterPipelineSVC"): stub
fixme:winspool:OpenPrinterW PRINTER_DEFAULTS ignored => (null),(nil),0x00000001
fixme:winspool:AddPrinterW DocumentPropertiesW on printer L"Microsoft XPS
Document Writer" fails
wine: Call from 0x105e0b0 to unimplemented function
KERNEL32.dll.RtlCaptureStackBackTrace, aborting
wine: Unimplemented function KERNEL32.dll.RtlCaptureStackBackTrace called at
address 0x105e0b0 (thread 0014), starting debugger...
Unhandled exception: unimplemented function
KERNEL32.dll.RtlCaptureStackBackTrace called in 32-bit code (0x7bc485e6).
Register dump:
CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b
EIP:7bc485e6 ESP:0033ef1c EBP:0033ef70 EFLAGS:00000216( - 00 - IAP1)
EAX:0033ef1c EBX:7bc9b830 ECX:0034002d EDX:007d3e0c
ESI:0033f7cc EDI:007d3e18
Stack dump:
0x0033ef1c krb5_rc_dfl_init+0xfc: 80000100 00000001 00000000 0105e0b0
0x0033ef2c krb5_rc_dfl_init+0x10c: 00000002 010957de 01095722 60143151
0x0033ef3c krb5_rc_dfl_init+0x11c: 00110000 7bc9b830 00000000 00000000
0x0033ef4c krb5_rc_dfl_init+0x12c: 00000064 7bc43fe6 00000000 7bc6ebc4
0x0033ef5c krb5_rc_dfl_init+0x13c: 0033efc4 60145124 00000040 7bc6ed4d
0x0033ef6c krb5_rc_dfl_init+0x14c: 007d1288 0033efa4 0034003c 010957de
Backtrace:
=>0 0x7bc485e6 stub_entry_point+0x4b(dll="KERNEL32.dll",
name="RtlCaptureStackBackTrace", ret_addr=0x105e0b0)
[/opt/wine/wine-git/dlls/ntdll/loader.c:192] in ntdll (0x0033ef70)
1 0x0034003c in libkrb5.so.3 (+0x7503c) (0x0033efa4)
2 0x0105dbeb in printfilterpipelinesvc (+0x5dbeb) (0x0033efb4)
3 0x0105de7c in printfilterpipelinesvc (+0x5de7c) (0x0033f1dc)
4 0x0105e036 in printfilterpipelinesvc (+0x5e036) (0x0033f1fc)
5 0x0101cfb3 in printfilterpipelinesvc (+0x1cfb3) (0x0033fc34)
6 0x0101d020 in printfilterpipelinesvc (+0x1d020) (0x0033fd28)
7 0x0101dab1 in printfilterpipelinesvc (+0x1dab1) (0x0033fd6c)
8 0x0101be04 in printfilterpipelinesvc (+0x1be04) (0x0033fd94)
9 0x0101be76 in printfilterpipelinesvc (+0x1be76) (0x0033fdb0)
10 0x0101bf7f in printfilterpipelinesvc (+0x1bf7f) (0x0033fdd0)
11 0x0101e133 in printfilterpipelinesvc (+0x1e133) (0x0033fef8)
12 0x7b87ebd0 start_process+0xe4(arg=(nil))
[/opt/wine/wine-git/dlls/kernel32/process.c:904] in kernel32 (0x0033ffe8)
...
00000025 (D) C:\windows\system32\unknown\PrintFilterPipelineSvc.exe
--- snip ---
In case you are wondering about "unknown" in path, Wine doesn't know about
directory id 55 which is printer processor directory.
Although it might deserve its own bug I mention it here:
--- snip ---
0045:fixme:setupapi:create_system_dirid unknown dirid 55
--- snip ---
That whole print processor stuff needs to be tackled separately.
--- snip ---
0032:Call KERNEL32.CopyFileW(0033f814
L"C:\\3e0c51033dbb7684e997f131b3146a\\update\\..\\i386\\filterpipelineprintproc.dll",0033fa1c
L"C:\\windows\\system32\\spool\\prtprocs\\w32x86\\filterpipelineprintproc.dll",00000000)
ret=0101cf79
0032:Ret KERNEL32.CopyFileW() retval=00000001 ret=0101cf79
0032:Call winspool.drv.AddPrintProcessorW(00000000,01002388 L"Windows NT
x86",01001f9c L"filterpipelineprintproc.dll",01001fd4 L"MS_XPS") ret=0101d032
0032:fixme:winspool:AddPrintProcessorW ((null),L"Windows NT
x86",L"filterpipelineprintproc.dll",L"MS_XPS"): stub
0032:Ret winspool.drv.AddPrintProcessorW() retval=00000000 ret=0101d032
--- snip ---
There are several issues, though I leave them alone for now ...
---
After adding RtlCaptureStackBackTrace() forward to kernel32.spec and adding
stub to ntdll (FIXME params + returning STATUS_NOT_IMPLEMENTED), the crash is
prevented.
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16906
Summary: .NET 3.0: XPSEPSC installer copies print processor files
to wrong directory (setupapi unhandled dirid 55)
Product: Wine
Version: 1.1.12
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: setupapi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
I mentioned this in bug 16879 and before the issue gets lost...
Wine doesn't know about directory id 55 which is print processor directory.
--- snip ---
...
00c4:fixme:setupapi:create_system_dirid unknown dirid 55
00c4:Call KERNEL32.GetSystemDirectoryW(00000000,00000000) ret=789dacd1
00c4:Ret KERNEL32.GetSystemDirectoryW() retval=00000014 ret=789dacd1
...
00c4:Call KERNEL32.lstrlenW(0015ab20 L"C:\\windows\\system32\\unknown")
ret=789ecb4c
...
00c4:Call KERNEL32.CreateFileA(006f26f0
"c:\\windows\\system32\\unknown\\printfilterpipelinesvc.exe",80000000,00000003,00000000,00000003,08000000,00000000)
ret=0106825d
...
--- snip ---
--- snip dlls/setupapi/dirid.c ---
/* create the string for a system dirid */
static const WCHAR *create_system_dirid( int dirid )
{
...
case DIRID_PRINTPROCESSOR: /* FIXME */
default:
FIXME( "unknown dirid %d\n", dirid );
return get_unknown_dirid();
}
...
}
--- snip dlls/setupapi/dirid.c ---
GetPrintProcessorDirectoryW() should provide all required information.
With patch applied:
--- snip ---
...
0031:Call KERNEL32.CopyFileW(0015b310
L"c:\\10976f8595cea39afb\\PrintFilterPipelineSvc.exe",0015cb70
L"C:\\windows\\system32\\spool\\prtprocs\\w32x86\\PrintFilterPipelineSvc.exe",00000000)
ret=60afb0c9
--- snip ---
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16878
Summary: .NET 3.0: XPSEPSC installer fails due to missing
ntoskrnl.exe placeholder and version resource
Product: Wine
Version: 1.1.12
Platform: Other
URL: http://www.microsoft.com/downloads/details.aspx?FamilyID
=10cc340b-f857-4a14-83f5-25634c3bf043
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntoskrnl
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
NOTE: bug 16875 which covers two issues in setupapi.SetupGetTargetPathW needs
to be properly fixed for *both* cases, see "update.inf" snippet which is part
of this bug report.
After bug 16875 (and 16876) are fixed, the installer fails:
"c:\\windows\\temp\\dd_dotnetfx3error.txt":
--- snip ---
[01/11/09,11:36:24] Microsoft .NET Framework 2.0: [2] Error: Installation
failed for component Microsoft .NET Framework 2.0. MSI returned error code 1603
[01/11/09,11:36:37] WapUI: [2] DepCheck indicates Microsoft .NET Framework 2.0
is not installed.
[01/11/09,11:36:37] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0
was not attempted to be installed.
--- snip ---
"c:\\windows\\temp\\dd_dotnetfx3install.txt":
--- snip ---
[01/11/09,11:36:37] WapUI: Return for RGB Rast indicates a successful
installation. DepCheck indicates the component is installed.
[01/11/09,11:36:37] WapUI: Return for MSXML 6.0 Parser indicates a successful
installation. DepCheck indicates the component is installed.
[01/11/09,11:36:37] WapUI: Return for WIC Installer indicates a successful
installation. DepCheck indicates the component is installed.
[01/11/09,11:36:37] WapUI: DepCheck indicates Microsoft .NET Framework 2.0 is
not installed.
--- snip ---
Obviously bug 12401 (which I have analyzed in bug 10601).
So the prerequisite expands.
1. clean WINEPREFIX
2. sh winetricks -q dotnet20
3. download .NET 3.0 Framework installer from: http://download.microsoft.com
/download/4/d/a/4da3a5fa-ee6a-42b8-8bfa-ea5c4a458a7d/dotnetfx3setup.exe
(sha1sum:
a566bcd2ffffc3842a95adc57f7df3f8cd11577f)
4. export _SFX_CAB_SHUTDOWN_REQUEST=1 (workaround, see bug 9158)
5. wine ./dotnetfx3setup.exe
It might take a while until all required packages are downloaded using BITS.
Note: If you need to redo steps, backup the directory "dotnetfx304506.30" from
"c:\\windows\\temp" to a different location, remove ~/.wine, copy
"dotnetfx304506.30" again to "c:\\windows\\temp" to prevent BITS from
downloading over and over again.
After applying prerequisite the installer fails again:
"c:\\windows\\temp\\dd_dotnetfx3error.txt":
--- snip ---
[01/11/09,11:53:13] XPSEPSC x86 Installer: [2] Error code 1603 for this
component means "ERROR_INSTALL_FAILURE
"
[01/11/09,11:53:13] XPSEPSC x86 Installer: [2] Setup Failed on component
XPSEPSC x86 Installer
[01/11/09,11:53:24] WapUI: [2] DepCheck indicates XPSEPSC x86 Installer is not
installed.
--- snip ---
"c:\\windows\\temp\\dd_XPS.txt":
--- snip ---
[dd_XPS.txt]
0.007:
================================================================================
0.008: 2009/01/11 11:53:12.167 (local)
0.009: C:\a71b96a363115310c46014e60bbc1d36\update\update.exe (version 6.2.29.0)
0.009: Hotfix started with following command line: /quiet /norestart
/log:C:\windows\temp\dd_XPS.txt
0.009: GetKernelType: GetInternalFilename failed
0.552: In Function TestVolatileFlag, line 11873, RegOpenKeyEx failed with error
0x2
0.552: In Function TestVolatileFlag, line 11905, RegOpenKeyEx failed with error
0x2
0.552: DoInstallation: CleanPFR failed: 0x2
0.553: SetProductTypes: InfProductBuildType=BuildType.IP
0.554: SetAltOsLoaderPath: No section uses DirId 65701; done.
0.554: RegisterDll: Executing command line: "C:\windows\system32\regsvr32.exe"
/s "C:\windows\system32\licdll.dll" ...
0.634: RegisterDll: Exit code=0x00000001
0.634: RegisterDll: Executing command line: "C:\windows\system32\regsvr32.exe"
/s "C:\windows\system32\regwizc.dll" ...
0.712: RegisterDll: Exit code=0x00000001
0.713: Unexpected Error While Executing Line 1 ( Condition.Requirement ) of
W2K.Condition
0.713: ExConditionalEvaluateSection: Syntax error in 'Condition' key of section
W2K.Condition.
0.713: DoInstallation: Error 0xf00c while evaluating extended conditional
section [ProductInstall.ExtendedConditional].
0.713: CleanupTrustedInfFile: GetFileAttributes for
C:\windows\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\update.cat
failed: 0x2
0.714: The XpsEPSC c:\a71b96a363115310c46014e60bbc1d36\update\update.inf file
is not correct.
0.714: Update.exe extended error code = 0xf00c
0.714: Update.exe return code was masked to 0x643 for MSI custom action
compliance.
--- snip ---
Relevant "update.inf":
--- snip ---
...
[ProductInstall.ExtendedConditional]
ConditionInstall=W2K.Condition
[W2K.Condition]
Condition = SingleOp, Condition.Requirement
ConditionalOperations=Install.Not2k
[Condition.Requirement]
GreatOrEqualOp=CheckFilever, System32.files, ntoskrnl.exe, >=, 5.1.0.0
...
[DestinationDirs]
Copy.System32=11
Copy.System32.not2k=11
Copy.PrintProc=55
Copy.dllcache=65619
Copy.dllcache.not2k=65619
--- snip ---
Adding version resource to ntoskrnl.exe alone is not sufficient, a placeholder
needs to be present in system32:
--- snip ---
0028:Call KERNEL32.FindFirstFileA(0033ac3c
"C:\\windows\\system32\\ntoskrnl.exe",0033a18c) ret=0106da6d
0028:Ret KERNEL32.FindFirstFileA() retval=ffffffff ret=0106da6d
0028:Call KERNEL32.GetLastError() ret=0106b894
0028:Ret KERNEL32.GetLastError() retval=00000002 ret=0106b894
...
0028:Call msvcrt._vsnprintf(0033a967,000007f7,01027e3c "Unexpected Error While
Executing Line %d ( %ws ) of %ws \n",0033b198) ret=0106b900
--- snip ---
After fixing this problem the condition is satisfied.
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16227
Summary: Tooltips on mouse hover in EMS SQL Manager block the
mouse click
Product: Wine
Version: 1.1.9
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P1
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ksfreitas(a)gmail.com
Created an attachment (id=17473)
--> (http://bugs.winehq.org/attachment.cgi?id=17473)
Screenshot of a tooltip bloocking the mouse click
In EMS SQL Manager (Free and Full), the tooltips block the mouse click, having
to resize to see all item without tooltip for click. The link for freeware
software download:
http://www.sqlmanager.net/en/products/postgresql/manager/download
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.