wine-bugs February 2010

wine-bugs@winehq.org

1 participants
6508 discussions

[Bug 15376] New: Lexware: Fehler bei Selbstregistrierung
by wine-bugs＠winehq.org 02 Jul '11

02 Jul '11

http://bugs.winehq.org/show_bug.cgi?id=15376 Summary: Lexware: Fehler bei Selbstregistrierung Product: Wine Version: 1.1.5 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: koesterreich(a)gmx.net Created an attachment (id=16225) --> (http://bugs.winehq.org/attachment.cgi?id=16225) screenshot of error-message At the end of the installation an error-dialog comes up, saying "Die folgenden Dateien wurden nicht selbstregistriert bzw. ihre Registrierung wurde nicht aufgehoben" ("The following files were not self-registered resp. their registration was not dismissed"). Then a list of the files follows and after each file "Modul nicht gefunden" ("Module not found"). List of files: C:\Programme\Lexware\Lexware professional\Gemeinsame Dateien\Framework\AxBhPage.ocx C:\Programme\Lexware\Lexware professional\Gemeinsame Dateien\Framework\AxDefPage.ocx C:\Programme\Lexware\Lexware professional\Gemeinsame Dateien\Framework\AxReisePage.ocx C:\Programme\Lexware\Lexware professional\Gemeinsame Dateien\Framework\AxUsrMgrDlg.ocx C:\Programme\Lexware\Lexware professional\Gemeinsame Dateien\Framework\BHKtoUI10.dll C:\Programme\Lexware\Lexware professional\Gemeinsame Dateien\Framework\LXBStaetteDlg.dll C:\Programme\Lexware\Lexware professional\Gemeinsame Dateien\Framework\lxframe.dll C:\Programme\Lexware\Lexware professional\Gemeinsame Dateien\Framework\LxMper10.dll And more files -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 14

[Bug 20332] New: Photoshop Elements 7.0 hangs and do nothing.
by wine-bugs＠winehq.org 30 Jun '11

30 Jun '11

http://bugs.winehq.org/show_bug.cgi?id=20332 Summary: Photoshop Elements 7.0 hangs and do nothing. Product: Wine Version: 1.1.31 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: blocker Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: l-e.englund(a)bredband.net Hello! I'm updated wine 1.1.30 -> 1.1.31. In the version 1.1.30 it was possible to run Photoshop elements 7.0, but not with version 1.1.31. The splash screen is OK. The problem is when you choose Edit, and starts the editor. Here Photoshop hangs, and will not run, even if you wait for a while. Regards Lars-Erik Englund -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 6

[Bug 20211] New: AutoCAD 2009: Fails to install
by wine-bugs＠winehq.org 29 Jun '11

29 Jun '11

http://bugs.winehq.org/show_bug.cgi?id=20211 Summary: AutoCAD 2009: Fails to install Product: Wine Version: 1.1.30 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: lukasz.wojnilowicz(a)gmail.com Created an attachment (id=23834) --> (http://bugs.winehq.org/attachment.cgi?id=23834) Failed installation window I'm using Wine-1.1.30 on Fedora 11 32 bit Steps to reproduce: 1) remove ~/.wine 2) sh winetricks vb6 dotnet30 msxml6 gecko all this components are installed by AutoCAD 2009 3) start AutoCAD 2009 installation When it gets to the window with progress bar it finishes installing one component and stops with error "Call not implemented" In AutoCAD 2009 Setup.log there is 2009/9/29:17:50:41 WINEUSER nslw === Setup started on nslw by WINEUSER === 2009/9/29:17:51:14 WINEUSER nslw Install DirectX 9.0 Runtime Succeeded 2009/9/29:17:51:14 WINEUSER nslw Install AutoCAD 2009 Failed Installation aborted, Result=120 2009/9/29:17:51:29 WINEUSER nslw === Setup ended === -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 13

[Bug 20680] New: winecfg: no Wave Out Devices under ALSA Drivers (M-Audio Delta)
by wine-bugs＠winehq.org 27 Jun '11

27 Jun '11

http://bugs.winehq.org/show_bug.cgi?id=20680 Summary: winecfg: no Wave Out Devices under ALSA Drivers (M-Audio Delta) Product: Wine Version: 1.1.32 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: marko.srebre(a)gmail.com Winecfg shows no "Wave Out Devices" under "ALSA Drivers" section. I only get "MIDI In Devices", "MIDI Out Device" and "Mixer Device" under the "ALSA Drivers". Of course, sound doesn't work then in wine or in test. Wine is compiled with alsa support, version is 1.1-32, but happens just the same with older versions. I suspect the problem is specific to my M-Audio Delta 66 sound card. I use no sound servers or anything that may be restricting the device. This card otherwise works flawlessly with every other application I am using. Older version of wine would usually report something about missing Master control, so I guess somethere there may be a problem, but not really sure how to fix it. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 6

[Bug 12744] New: Steam tray icon doesn' t appear if panel hidden in autohide mode
by wine-bugs＠winehq.org 26 Jun '11

26 Jun '11

http://bugs.winehq.org/show_bug.cgi?id=12744 Summary: Steam tray icon doesn't appear if panel hidden in autohide mode Product: Wine Version: 0.9.60 Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: major Priority: P2 Component: winex11.drv AssignedTo: wine-bugs(a)winehq.org ReportedBy: rmuncrief(a)comcast.net This bug may be related to the now closed bug 12362, but I've been asked to file a new bug report for it. I am running Ubuntu Gutsy AMD64. I've found that the Steam system tray icon doesn't appear correctly if the bottom panel is in autohide mode and hidden. If the panel is completely hidden (by using gconf-editor and setting /apps/panel/default_setup/toplevels/bottom_panel/auto_hide_size to 0) A space is created for it in the system tray, but right or left clicking over it does nothing. If the normal autohide setting of 6 is used then the leftmost icon in the system tray will be duplicated, but it will function as the Steam system tray icon. For example, my leftmost icon is Basket, so when I start Steam the Basket icon is duplicated, but it fully functions as the Steam icon would. However, if you hold your cursor over the panel so it's visible when Steam starts then the tray icon appears and functions correctly. And of course if the panel isn't in autohide mode the tray icon also appears correctly. So it simply appears that if the panel is not fully visible when Steam starts, the Steam system tray icon is not loaded correctly. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 19

[Bug 18755] New: Street Wars: Constructor Underground - Game sound lags lots and freezes up
by wine-bugs＠winehq.org 26 Jun '11

26 Jun '11

http://bugs.winehq.org/show_bug.cgi?id=18755 Summary: Street Wars: Constructor Underground - Game sound lags lots and freezes up Product: Wine Version: 1.1.22 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: markh789(a)gmail.com Created an attachment (id=21510) --> (http://bugs.winehq.org/attachment.cgi?id=21510) All the log. I have attached a the game play. The game's sound lags alot, and the game will start to freeze and lock up, it's not a memory leak (from what I can see). Do you think the Component d3d is causing both the issues? It could also be dplay. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 27

[Bug 19006] New: World of Warcraft: takes 2 minutes to log out because of err:ntdll:RtlpWaitForCriticalSection
by wine-bugs＠winehq.org 26 Jun '11

26 Jun '11

http://bugs.winehq.org/show_bug.cgi?id=19006 Summary: World of Warcraft: takes 2 minutes to log out because of err:ntdll:RtlpWaitForCriticalSection Product: Wine Version: 1.1.23 Platform: PC-x86-64 URL: http://www.trywarcraft.com/ OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P4 Component: ntdll AssignedTo: wine-bugs(a)winehq.org ReportedBy: xxjorisxx+wine(a)gmail.com In a very reproducible manner ever since World of Warcarft was updated to patch 3.0+ have I been having trouble to log out normally - after 2 minutes it simply times out and shows "You have been disconnected from the server" which coincides the following messages: err:ntdll:RtlpWaitForCriticalSection section 0x4eafa34 "?" wait timed out in thread 0037, blocked by 0009, retrying (60 sec) err:ntdll:RtlpWaitForCriticalSection section 0x4eafa34 "?" wait timed out in thread 0037, blocked by 0009, retrying (60 sec) >> here it's back in the login screen showing that I have been disconnected fixme:win:EnumDisplayDevicesW ((null),0,0x39deb4,0x00000000), stub! Please note that for the rest World of Warcraft is working more or less smoothly. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 9

[Bug 11486] New: Anarchy Online does not patch
by wine-bugs＠winehq.org 24 Jun '11

24 Jun '11

http://bugs.winehq.org/show_bug.cgi?id=11486 Summary: Anarchy Online does not patch Product: Wine Version: 0.9.54. Platform: All OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: trevor_garrick(a)shaw.ca When trying the patching in Anarchy Online, the AnarchyPatcher.exe produces an error window which states: "An unsupported operation was attempted." The Patch window then flashes on for a brief second then terminates. This occurred since Anarchy patch 17.5.2, when the patcher was updated by the patch engine. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 38

[Bug 15851] New: The german version of Far Cry 2 does not pass the Securom test
by wine-bugs＠winehq.org 24 Jun '11

24 Jun '11

http://bugs.winehq.org/show_bug.cgi?id=15851 Summary: The german version of Far Cry 2 does not pass the Securom test Product: Wine Version: 1.1.7 Platform: Other URL: http://farcry.de.ubi.com/experience/ OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: maxmusterm(a)gmail.com CC: maxmusterm(a)gmail.com Created an attachment (id=16986) --> (http://bugs.winehq.org/attachment.cgi?id=16986) Far Cry 2 Securom Test When I install Far Cry 2 like it's described here: http://appdb.winehq.org/objectManager.php?sClass=version&iId=14254 the game comes to the SecuROM check window and stops by 30%. I have not installed PunkBuster. My video card is a GeForce Go 6150/PCI/SSE2/3DNOW! drive version 2.1.2 NVIDIA 177.80. Tested with wine 1.1.6 and 1.1.7. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 13

[Bug 15674] New: Sacred 2 - Fallen Angel startup problem
by wine-bugs＠winehq.org 24 Jun '11

24 Jun '11

http://bugs.winehq.org/show_bug.cgi?id=15674 Summary: Sacred 2 - Fallen Angel startup problem Product: Wine Version: 1.1.6 Platform: Other OS/Version: other Status: UNCONFIRMED Severity: major Priority: P2 Component: directx-d3d AssignedTo: wine-bugs(a)winehq.org ReportedBy: fausap(a)unina.it Created an attachment (id=16735) --> (http://bugs.winehq.org/attachment.cgi?id=16735) debug output of run session Sacred 2 - Fallen Angel doesn't work. The game register and activate itself in the right way, but it seems there's a problem with DirectX. I didn't find a way to use opengl instead, maybe there isn't. Attached the output, running wine sacred2.exe Thanks, Fausto -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 16

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-bugs February 2010