http://bugs.winehq.org/show_bug.cgi?id=22928
Summary: IE8 for Vista's "missing updates" message is cut off
Product: Wine
Version: 1.2-rc2
Platform: x86-64
URL: http://download.microsoft.com/download/F/8/8/F88F09A2-
A315-44C0-848E-48476A9E1577/IE8-WindowsVista-x86-ENU.e
xe
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: shlwapi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: RandomAccountName(a)mail.com
Created an attachment (id=28374)
--> (http://bugs.winehq.org/attachment.cgi?id=28374)
Terminal output
Trying to run the Vista installer for IE8 (with Windows version set to Vista)
yields a message complaining about missing updates, but the message ends
prematurely in the middle of a word. Native shlwapi makes it fully visible.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22736
Summary: Aztaka demo does not display any graphics and crashes
Product: Wine
Version: 1.1.44
Platform: x86
URL: http://downloads.aztaka.com/demo/AztakaDemo-1.04.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: leighmanthegreat(a)hotmail.com
Large file demo ~900MB
Running the came works after winetricks vcrun2008
It then runs but no graphics are displayed in the game, and some of the menus.
setting the mmdevapi=disable override makes the menus display correctly but
still no graphics.
Judging by
http://appdb.winehq.org/objectManager.php?sClass=version&iId=19469&iTesting…
the lack of graphics is a regression.
Following this running it from the desktop icon launches fine but running from
terminal with &> log.txt appended results in a crash -log attached
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22461
Summary: ms office 2000 fatal error
Product: WineHQ Bugzilla
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: bugzilla-unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: info(a)comixrevolution.com
when the installation of ms office 2000 is end, on the video appear a windows
message error
:
CFGWIZ.exe has causede an cricial error
and access don't run
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24172
Summary: SyncToy doesn't start when using Mono
Product: Wine
Version: 1.3.1
Platform: x86-64
URL: http://www.microsoft.com/downloads/details.aspx?family
id=c26efa36-98e0-4ee9-a7c5-98d0592d8c52
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mscoree
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: RandomAccountName(a)mail.com
SyncToy (2.1 x86) exits silently with no terminal output if 'winetricks mono26'
is used before installing instead of dotnet20. Trying to run the command line
version (SyncToyCmd.exe) gives this error message:
It seems you may have uninstalled the required Microsoft Sync Framework
components for SyncToy. Please re-run SyncToy 2.1 setup from the original setup
location.
Of course, I haven't uninstalled anything in this wineprefix. At a glance, the
Sync Framework appears to be installed (a "Microsoft Sync Framework" folder
exists in C:\Program Files and contains some DLLs).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23281
Summary: Silent Hunter 4: Game freezes on ship collisions
Product: Wine
Version: 1.2-rc4
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: amlopezalonso(a)gmail.com
Created an attachment (id=29019)
--> (http://bugs.winehq.org/attachment.cgi?id=29019)
WINEDEBUG=+loaddll,+process (Notice exception at the end of the file)
Ships collisions in Silent Hunter 4 - Wolves Of The Pacific (upgraded to 1.4)
freeze game.
CPU: AMD Athlon 3200+
Graphics: NVIDIA GeForce 8500-GT
Any suggestion to debug this further?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23966
Summary: Virtua Fighter 2 demo crashes shortly after startup
Product: Wine
Version: 1.3.0
Platform: x86
URL: http://www.sega.com/support/pcdownloads/vf2_demo/vf2_d
emo.exe
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
vf2_demo.exe's sha1sum is efd34dd079cdfd7b2ccc195b584d7ca10ec7e82b
The app requires win98 mode to install, and refuses to run
in 32 bit mode, so you have to do CTL-ALT-F1 and run
startx -- :1 -depth 16
to get a 16 bit X to run it in (8 is supposedly ok, too).
Once you start it in a 16 bit X, it crashes with
Unhandled exception: page fault on read access to 0x00000000 in 32-bit code
(0x00420ebb).
I swear I've seen this running on Wine, so I'm pretty sure it can work
ok if we can figure out this null pointer problem.
You can install this with wisotool vfs_demo.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16676
Summary: Running RTG Bills requires alternate winecfg
configurations of winetricks installed dcom98 DLLs for
alternate functions
Product: Wine
Version: 1.1.9
Platform: PC
URL: http://appdb.winehq.org/objectManager.php?sClass=version
&iId=15018
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mstuff(a)read.org.nz
Everything used seems to work with the following limitation, this is a kinda
script to install which should explain:
### Get and install winetricks:
### http://wiki.winehq.org/winetricks
# Set your preferences
WINEPREFIX=~/.Rtgbills winecfg;\
# Set up wine for RTG Bills using winetricks
WINEPREFIX=~/.Rtgbills winetricks vb6run art2kmin mdac27 wsh56 dcom98;\
# Download RTG Bills from here:
# http://www.rtgsoftware.com/download.htm
# Or (adjust as required):
wget http://cdn.simtel.net/pub/simtelnet/winxp/busacct/bills221.exe;\
WINEPREFIX=~/.Rtgbills wine bills221.exe;\
done
It seems, for RTG Bills and Timer to run normally set dcom98 dlls "ole32",
"oleaut32" & "rpcrt4" to "builtin"; BUT to run any (it seems) of the functions
under the "Reports" menu set those dlls to "native, builtin" - some other
functions (e.g.: Setup > Bill Formats...; File > Change Matter Number...) will
fail with this set up. I guess some clever setup of winecfg could resolve this
tooing and froing.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21014
Summary: Dark Sector no Sound
Product: Wine
Version: 1.1.34
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-dsound
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: sbagmeijer(a)live.com
CC: sbagmeijer(a)live.com
Created an attachment (id=25211)
--> (http://bugs.winehq.org/attachment.cgi?id=25211)
Dark Sector Console Sound Error
The Game Dark Sector runs perfect with Wine, except it does not have any sound.
(sorry this is my first bug report, so please if I do anything wrong help me
out so I know how to do it next time)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15781
Summary: Can't run AllInOne-Office 5
Product: Wine
Version: 1.1.7
Platform: Other
URL: http://www.allinone-office.de/
OS/Version: other
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
A user asked for this package here:
http://www.linux-forum.de/warenwirtschaft-allione-5-0-a-20117.html
so I tried installing it.
First, you have to set your language to German, e.g.
LANG=DE_de.UTF-8
or it commplains about a language mismatch.
Then, you have to set your Windows version to NT 4 with winecfg, else
it complains that it needs Windows NT 4 or higher.
Then it installs. The font in the installer is almost too tiny
to read, even with corefonts installed.
It first silently installs the Access 2002 runtime
libraries and Jet 40, and those subinstallers aren't particularly
happy; they both end with
err:msi:ITERATE_Actions Execution halted, action L"InstallFinalize" returned
1627
but the main installer continues blindly.
It asks if you want to keep the existing version of some wine dll; I said yes.
It installs a menu item showing that the way to run the app is
wine "C:\\Program Files\\Common Files\\Microsoft Shared\\Access
Runtime\\Office10\\MSAccess.exe" /Runtime "C:\\Program
Files\\AllInOne-Office\\AllInOne-Office.mde"
but that fails with file not found... maybe because of the
access runtime installation problem?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10204
Summary: Incorrectly raised FD_WRITE socket event
Product: Wine
Version: 0.9.48.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: wine-net
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: rraptorr(a)nails.eu.org
Created an attachment (id=8812)
--> (http://bugs.winehq.org/attachment.cgi?id=8812)
FD_WRITE event on socket test program
According to MSDN WSAEventSelect function description
(http://msdn2.microsoft.com/en-us/library/ms741576.aspx), FD_WRITE event should
be raised only once after: a) successful connection b) WSAEWOULDBLOCK error
while in nonblocking mode.
MSDN description:
"The FD_WRITE network event is handled slightly differently. An FD_WRITE
network event is recorded when a socket is first connected with
connect/WSAConnect or accepted with accept/WSAAccept, and then after a send
fails with WSAEWOULDBLOCK and buffer space becomes available. Therefore, an
application can assume that sends are possible starting from the first FD_WRITE
network event setting and lasting until a send returns WSAEWOULDBLOCK. After
such a failure the application will find out that sends are again possible when
an FD_WRITE network event is recorded and the associated event object is set."
Unfortunately, it seems that in Wine 0.9.48 (and a few earlier versions too)
this event is raised every time it is possible to write to the socket. I've
created a simple test program (FD_WRITE-test.c) that shows this problem. When
ran on Windows I get:
lNetworkEvents: 2
lNetworkEvents: 0
but when ran on Wine:
lNetworkEvents: 2
lNetworkEvents: 2
which means that FD_WRITE was raised twice and it shouldn't.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12366
Summary: Acclaim Cashbook startup failure - recompile visual
basic
Product: Wine
Version: 0.9.58.
Platform: PC
URL: http://www.acclaim.co.nz/download.htm
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: pcpavnz(a)gmail.com
Install routine executes properly, but when trying to run the installed
program, an error message pops up with a message about having to recompile the
visual basic module. I suspect the message indicates the cashbook program is
what it thinks requires recompiling, not the environment it is running from,
but thought I'd submit it anyway because so many people want accounting
software packages to work inside Linux and wine is so close very now to getting
it right.
url provided in the report form is for the free 90 day trial download, which is
no different to a full version.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9504
Summary: Cannot close CMonthCalCtrl popup by clicking outside
popup
Product: Wine
Version: CVS/GIT
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: wine-user
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: peter(a)cendio.se
I have an application that uses a custom control: A wrapper that displays a
CMonthCalCtrl in a popup window. In Windows, it's possible to close the popup
by clicking outside the popup. With Wine, however, it is necessary to either
select a date or press Escape. The popup will also be closed if the user tries
to move the popup window (which has X11 WM decorations). When clicking outside
the popup with Wine, Wine generates a beep through X11 (I believe this happens
since a WM_SETCURSOR with HTERROR is generated).
A demo program is available as
http://www.cendio.se/~astrand/wine/6-close-popup/. Requires Visual C++ 2005
runtime libraries.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14823
Summary: TSM Casin doesnt start after adding a contact
Product: Wine
Version: 1.1.0
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jacobidiego(a)gmail.com
TSM Casin is a software used mostly in Argentina to send SMS to cellphones
using the services provided by some webpages or sending e-mails.
The software as a development value is a crap, the developer have programmed it
with Visual Basic, have used ActiveX to attach IE to a tiny square so it can
display the Validation image, instead of just comunicating via http, have a
banner in the middle and a lot of cuestionable choices. But it is very usefull
and there isnt any linux similar tool.
It implements a custom Contact list, which is the one that is causing troubles,
everything else works fine, it can send SMS's correctly and IE-ActiveX doesnt
makes any issue.
When adding a contact and after filling all the information required (Name,
Cellphone Company, and Cellphone Number), and clicking start, the window should
close and the name should list on the contact list, but it doesnt close, then
clicking again on OK gives a warnning saying that the contact already exist,
and endeed it was added, so to close the wine i have to press Cancel.
Then i can use the contact list normally with any issue, but after closing TSM
and launching it again, it stays on an unuseful load-screen.
Then to get back TSM it is necessary to remove the created contacts, This is
done by deleting the registry key:
HKEY_USERS\S-1-5-4\Software\VB and VBA Program Settings\TSM\Agenda1.0
But copying the cellphones all the time is not a very good aproach.
The download is:
http://www.tsmcasin.com/ir/?id=16
and is freeware with only unharmful banners on it.
There is just 1 post on its forums asking for a linux version:
http://foro.tsmcasin.com/tsmforo/viewtopic.php?f=15&t=716&p=2374&hilit=gpl#…
The developer stays says that windows is standard and linux dont and that wont
be a version for linux.
I know that the best solution would be to develop a real and good open source
application to handle this stuff for all people under the world, but this wont
happen any time soon, and in the mean time, the this problem can be firing a
simple error easy to fix on wine.
Cheers.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21061
Summary: Superantispyware crashes when preferences button
clicked.
Product: Wine
Version: 1.1.34
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bugzilla(a)technicalbloke.com
Created an attachment (id=25258)
--> (http://bugs.winehq.org/attachment.cgi?id=25258)
The error messages that appear in the shell
This software stops working and triggers it's own error reporting mechanism
whenever I click the 'preferences' button in it's main dialog.
Software is available to download here...
http://www.superantispyware.com/onlinescan.html
I have also uploaded a copy to my server to aid with debugging if that one
isn't available or changes or whatever...
http://www.technicalbloke.com/sas_ols.exe
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21062
Summary: Superantispyware crashes at end of custom scan folder
selection process.
Product: Wine
Version: 1.1.34
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bugzilla(a)technicalbloke.com
Created an attachment (id=25259)
--> (http://bugs.winehq.org/attachment.cgi?id=25259)
Contents of my console window during this process.
App crashes at the end of this sequence of events...
Perform Custom Scan Selected
Memory, Registry, Startup Locations, Cookies all Deselected
Select Folders Clicked
Add Clicked
Folder Selected from Dialog
OK Clicked
Close Clicked
This causes the apps internal error reporting mechanism to trigger, the app
doesn't close until this dialog is dismissed so controls on the underlying
window are still clickable however, clicking next demonstrates that the
settings entered above have not taken.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14221
Summary: After Wineboot startup
Product: Wine
Version: 1.0.0
Platform: Other
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: deepblu(a)poczta.fm
Created an attachment (id=14508)
--> (http://bugs.winehq.org/attachment.cgi?id=14508)
wine_dump
After Wineboot start i have message like in attachment;
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14827
Summary: Autocad 2005 : Multiline text edit crashes application
Product: Wine
Version: CVS/GIT
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: max(a)veneto.com
If you try to edit a multiline text (MTEXT) or a dimension text on autocad
(tested on 2005), following happens :
1) The editor is (correctly) shown, but edited text is not visible on text area
2) If you use ESC to abort command, you retourns on autocad correctly
3) If you press OK button to accept changes, the whole autocad hangs.
Ciao
Max
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14422
Summary: AutoCAD 2005 fails to start
Product: Wine
Version: 1.1.0
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: r.snajdr(a)coramexport.cz
AutoCAD 2005 now installs but it wont start. It reports some problems about
gdiplus. I tryed to istall another one from ddl.com but it did not help
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13838
Summary: AutoCAD 2005 setup : Missing backslash in registry entry
and profile path
Product: Wine
Version: 1.0-rc4
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: max(a)veneto.com
During setup of AutoCAD2005, some values in registry are incorrectly set.
In detail, what should be :
C:\\windows\\profiles\\massimo\\Applicazioni\\Autodesk\\AutoCAD 2005\\......
Is instead written like that :
C:\\windows\\profiles\\massimo\\ApplicazioniAutodesk\\AutoCAD 2005\\
Note the missing '\\' between 'Applicazioni' and 'Autodesk'
Folders in profile are created accordingly, so instead of :
massimo
Applicazioni
Autodesk
It's created as :
massimo
ApplicazioniAutodesk
That brings problems in some addons (like ExpressTools for autocad) and, I
guess,
it's the cause for the first-run error messagebox.
I think some path-related functions in wine is missing the terminating \\.
Ciao
Max
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10635
Summary: Tivo Desktop 2.5.1 will not install
Product: Wine
Version: 0.9.50.
Platform: PC
URL: http://www.tivo.com/mytivo/domore/tivotogo/windows.html
OS/Version: Windows XP
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: joseph_scott123(a)msn.com
When trying to install Tivo Desktop 2.5.1 I get the following messages and it
fails to install.
fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),0,3,(nil),0,(nil)) - stub!
err:ole:CoGetClassObject class {6c736db1-bd94-11d0-8a23-00aa00b58e10} not
registered
err:ole:CoGetClassObject no class object {6c736db1-bd94-11d0-8a23-00aa00b58e10}
could be created for context 0x1
fixme:msi:AutomationObject_GetIDsOfNames Unknown member L"UILevel", clsid
{000c1090-0000-0000-c000-000000000046}
fixme:seh:_abnormal_termination (void)stub
fixme:seh:_abnormal_termination (void)stub
fixme:seh:_abnormal_termination (void)stub
Usage:
Install a product:
msiexec {package|productcode} [property]
msiexec /i {package|productcode} [property]
msiexec /a package [property]
Repair an installation:
msiexec /f[p|o|e|d|c|a|u|m|s|v] {package|productcode}
Uninstall a product:
msiexec /x {package|productcode} [property]
Advertise a product:
msiexec /j[u|m] package [/t transform] [/g languageid]
msiexec {u|m} package [/t transform] [/g languageid]
Apply a patch:
msiexec /p patchpackage [property]
msiexec /p patchpackage /a package [property]
Modifiers for above operations:
msiexec /l[*][i|w|e|a|r|u|c|m|o|p|v|][+|!] logfile
msiexec /q{|n|b|r|f|n+|b+|b-}
Register a module:
msiexec /y module
Unregister a module:
msiexec /z module
Display usage and copyright:
msiexec {/h|/?}
NOTE: Product code on commandline unimplemented as of yet
Copyright 2004 Vincent B�ron
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17277
Summary: Remote virtual memory allocation error
Product: Wine
Version: 1.1.13
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: loader
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gabmoa(a)yahoo.it
ZFlash is a win32 application used to simulate and edit part programs
for a cnc. The simulator part is achieved running a reduced version
of numerical control into a fixed memory map from 1 to 8 MB (the current
version is from 1-16 MB but it's the same principle). The numerical control
need to be mapped in this way because it uses fixed addresses.
The application runs in NT 4 SP6, 2000, XP and Vista MS OS but in wine
it doesn't work.
I have seen there is a problem in the memory mapping when I try to run the
application into wine so I've created a reduced example with the only
"incriminated" part. In the attached zip file there are 3 projects:
ZLoader, Z32Sim and Test.
The steps involved are the same of the complete win32 application.
ZLoader.exe create the process 'Test', suspended, and try to reserve memory
of 'Test' from 1 to 8 MB, then it resumes the process.
Test.exe is compiled with the linker flags
/base:"0x800000" /stack:0x800000,0x1000
so the big stack can not be inserted into the first 8MB and the
base of exe is changed from the default 4MB assigned by Visual Studio.
Z32Sim.dll is loaded into 'Test' and it have to map the memory (1-8MB).
To test it in the Debug directory we can execute ZLoader Test.exe
In wine Test fail when ZLoader try to resume it (I've seen that with winedbg)
with the following error:
err:seh:raise_exception Unhandled exception code c0000005 flags 0 addr
0x7ef9e617
Unfortunately it seems a not so easy task because with winedbg I can't
attach to Test process when it's suspended.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=20439
Summary: TroopMaster hangs on startup
Product: Wine
Version: 1.1.31
Platform: PC-x86-64
URL: http://www.troopmaster.com
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: al_turner(a)comcast.net
TroopMaster installs, but hangs on startup. Main window will not activate
(animation works, but no response to keyboard or mouse). Does not even get to
the DotNet download hangup as mentioned in bug 8997. More like 18801 but I
don't even get the popup window showing the attempt to connect to FTP.
As far as I can tell, the FTP attempt only happens if you activate the DOTNET
function (after installing the software). I have not been able to get to the
point of activating the DOTNET since I can't get it that far yet.
I followed the HOWTO from the AppDB that describes the install/kill/restart
process.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18954
Summary: Source Insight: Text in Editor Window overlaps with
other text.
Product: Wine
Version: 1.1.21
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: turanammo(a)rocketmail.com
Created an attachment (id=21809)
--> (http://bugs.winehq.org/attachment.cgi?id=21809)
Text overlap in editor window
Text seems to overlap with other text, usually the overlapped text is shown
twice. Happens when the cursor is moved upwards or downwards using the keypad
arrow keys up/down respectively.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17807
Summary: Electronics Workbench 5.12: measurement units aren't
shown
Product: Wine
Version: 1.1.17
Platform: PC
URL: http://appdb.winehq.org/objectManager.php?sClass=version
&iId=402
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: nick(a)vyalceva.net
Created an attachment (id=20039)
--> (http://bugs.winehq.org/attachment.cgi?id=20039)
the oscilloscope window
When trying to set measurement unit for a parameter in the "Component
Properties" window, or in the oscilloscope, measurement units are not shown in
the selection box.
But I can view it by copying from the box and pasting in a text editor, e.g.
"0.50 s/div ".
Old wine version 0.9.52 shows units in the oscilloscope window, but doesn't do
it in the component properties
(http://appdb.winehq.org/screenshots.php?iAppId=267&iVersionId=402).
Also I get the following error message on exit: "access violation on
(FFF4EFFF), reading C4".
Running from terminal shows me the only line
"fixme:font:WineEngRemoveFontResourceEx :stub".
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.