http://bugs.winehq.org/show_bug.cgi?id=14798
Summary: ETax 2008 cannot verify
Product: Wine
Version: 1.1.2
Platform: PC-x86-64
URL: http://ato.gov.au/etax
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hewus.owns(a)gmail.com
ETax 2008 verification does not work. Clicking 'Ok' on the popup at the
verification stage causes the next screen to appear blank, and navigation
buttons to be greyed out.
I have attached a log of my output while running this part of ETax 2008.
The first four lines of the log are known configuration issues on my end and
can be ignored.
The 88d969c0-f192-11d4-a65f-0040963251e5 errors appear when 'Yes' is chosen in
the pre-filling section. There is no apparent loss of functionality here.
The 76a64158-cb41-11d1-8b02-00600806d9b6 errors appear when 'Ok' is chosen in
the popup at the verification stage. This is where the program effectively
breaks. This is the subject of this bug report.
This issue has been confirmed in a couple of posts on AppDB and elsewhere. To
reproduce this issue in testing, the TFN 123456782 can be used.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25848
Summary: CF-Downloader Crash
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: p4repwnag3(a)gmail.com
So, I downloaded the CrossFire Downloader and when it started downloading I got
an error which is below. I don't know why this happens if anyone could help me
that would be great.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25802
Summary: CARCare fails to access own database and exits
Product: Wine
Version: 1.3.11
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ajg02(a)elfringham.co.uk
Created an attachment (id=32878)
--> (http://bugs.winehq.org/attachment.cgi?id=32878)
Terminal session log
On launching application, first of all you get a dialogue box titled "Error:
3251 in bDBValid Proc" with the message "Description: Operation is not
supported for this type of object." and an OK button. Selecting 'OK' then leads
to a dialogue box where CARCare complains that it cannot recognise the database
again with an OK button. Selecting 'OK' again then leads to a third dialogue
box titled "CARCare" with the message "Run-time error '48': Error in loading
DLL" and an OK button. On selecting OK, the application exits.
The log from a terminal session is attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9721
Summary: Support for HKEY_DYN_DATA\Config Manager\Enum registry
tree
Product: Wine
Version: 0.9.45.
Platform: All
OS/Version: All
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: wine-misc
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jjk3(a)msstate.edu
Please populate the HKEY_DYN_DATA\Config Manager\Enum registry tree. This is
needed by some games to detect the hardware on the running system.
For example, EA's Need for Speed III includes a 3dsetup.exe program that
queries HKEY_DYN_DATA\Config Manager\Enum\*\HardWareKey to detect graphics
hardware.
Free demo here: ftp://ftp.ea.com/pub/ea/demos/nfs3/nfsdemo.zip
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25842
Summary: Autodesk Inventor 2008: Error at executing
RegisterJTTranslator.exe
Product: Wine
Version: 1.3.12
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
Created an attachment (id=32927)
--> (http://bugs.winehq.org/attachment.cgi?id=32927)
Error messages
Steps to reproduce:
1) remove ~/.wine
2) winetricks dotnet20
3) wine Setup32.exe
4) Next, next ,next ...
5) Uncheck all components that aren't Inventor
6) Next, next ,next ...
7) Components start to install
Behaviour:
I get lot of error windows (see attachment) at the end of installation. In the
image there is RegisterJTTranslator.exe. It is small file (16 KB) and is
probably designed to register JTTranslator.dll (284 KB). There are many of
those RegisterXXX.exe and every one fails.
Expected behaviour:
I shouldn't get any error.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25158
Summary: Keychamp 2.0 Crashes when launched
Product: Wine
Version: 1.2.1
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: koolblue3(a)gmail.com
Created an attachment (id=31911)
--> (http://bugs.winehq.org/attachment.cgi?id=31911)
Backtrace log for Keychamp 2.0 crash
Everytime I try to launch Keychamp 2.0 it crashes and pops up a box saying
"Unhandled exception: c0000005 At address: f7536cca." I have attached a
backtrace log.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22775
Summary: COD:MW2 crashes upon ALT-ENTER
Product: Wine
Version: 1.1.44
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
Just start COD:MW2, let it put up its initial screen, and press ALT-ENTER.
The screen will switch between fullscreen and windowed as expected,
but the game will then crash, e.g.
trace:d3d9:IDirect3DDevice9Impl_CreateTexture iface 0x198ef8, width 432, height
240, levels 1, usage 0, format 0x16, pool 0x1, texture 0x15e99060,
shared_handle (nil).
trace:d3d:device_context_add Adding context 0x213d4e28.
trace:d3d:context_create Successfully created new context 0x213d4e28
trace:d3d:context_enter Entering context 0x213d4e28, level 1.
trace:d3d:context_set_current Switching away from destroyed context 0x18bc5e60.
warn:d3d:context_validate DC 0x96c belongs to window 0x50160 instead of
0x30160.
trace:d3d:context_update_window Updating context 0x18bc5e60 window from 0x30160
to 0x9ad46d.
trace:d3d:context_destroy_fbo_entry Destroy FBO 3
trace:seh:raise_exception code=c0000005 flags=0 addr=0x132b1c ip=00132b1c
tid=0046
...
Unhandled exception: page fault on read access to 0x00000000 in 32-bit code
(0x00000000).
Backtrace:
=>0 0x00000000
1 context_set_current+0x56(ctx=0x401df3f0) [dlls/wined3d/context.c:932] in
wined3d
2 context_set_current+0x56(ctx=0x4868c720) [dlls/wined3d/context.c:932] in
wined3d
3 context_create+0x62e(swapchain=0x1c6450, target=0x16d8d5a8,
ds_format_desc=0x1bdc20) [dlls/wined3d/context.c:1387] in wined3d
4 swapchain_create_context_for_thread+0x36(iface=0x1c6450)
[dlls/wined3d/swapchain.c:960] in wined3d
5 context_acquire+0xfe(device=0x1c0028, target=0x45d17b38)
[dlls/wined3d/context.c:1785] in wined3d
6 wined3d_event_query_test+0x82(query=0x46bea318, device=0x1c0028)
[dlls/wined3d/query.c:62] in wined3d
7 IWineD3DEventQueryImpl_GetData+0x46(iface=0x46bea2f0, pData=0x1813e200,
dwSize=0x0004, dwGetDataFlags=0x0001) [dlls/wined3d/query.c:398] in wined3d
8 IDirect3DQuery9Impl_GetData+0x63(iface=0x46bea2d8, pData=0x1813e200,
dwSize=0x0004, dwGetDataFlags=0x0001) [dlls/d3d9/query.c:134] in d3d9
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22553
Summary: Running Digitech JUpdater GSP1101vC48.exe fails on
MacOS 10.5.8
Product: Wine
Version: 1.1.39
Platform: x86
OS/Version: Mac OS X 10.5
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: rtmd30(a)yahoo.com
I'm trying to run Digitech's "JUpdater GSP1101vC48.exe" on MacOS 10.5.8 and
getting the following set of verbiage:
Greg-MBP-wireless:Downloads greg$ wine JUpdater\ GSP1101vC48.exe
fixme:font:SetMapperFlags (0x67c, 0x00000000): stub - harmless
fixme:font:SetMapperFlags (0x750, 0x00000000): stub - harmless
fixme:font:SetMapperFlags (0x764, 0x00000000): stub - harmless
Port Name[0 0] DigiTech USB X-Edit
In Name[0] DigiTech GSP1101
Port Name[0 1] USB Audio Device
In Name[0] DigiTech GSP1101
Port Name[0 2] DigiTech GSP1101
In Name[0] DigiTech GSP1101
Found Port
fixme:midi:MIDIOut_LongData MOD_MIDIPORT
The "font" ones seem benign but the last one seems to keep the updater from
running to completion. I get an X-window that looks OK, but when I try to
update the device the software says no device was found.
Let me know if there's additional info I can gather for you.
Thanks.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21605
Summary: MINDApro fails to run (fbguard.exe crashes)
Product: Wine
Version: 1.1.37
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: allsymes(a)gmail.com
Created an attachment (id=26075)
--> (http://bugs.winehq.org/attachment.cgi?id=26075)
Terminal output from running
I have a software package called MINDApro. It installs under Wine, but when I
try to run it I get several error and crash messages. I know from running it on
Windows XP that I need to run the mlp_manager.exe program first, as this runs
the database server Firebird first (http://www.firebirdsql.org/).
I have attached the terminal output. The following is the sequence of error
messages that popup on running mlp_manager:
1. empty error popup.
2. "...mlp_manager.exe has encountered a serious problem and needs to
close...".
3. Title "Application Error", reads:
"Exception EExternalException in module ntdll.dll at 0002E8B8.
External exception C0000025."
4. Titled "Error", reads:
"""
An unexpected error has occurred. Please close MINDA software and restart. If
the error persists please contact MINDA on ...<snip>...
ERROR ISC ERROR CODE 335544721
ISC ERROR MESSAGE:
Unable to complete network request to host "localhost".
Failed to establish a connection.
unknown Win32 error 10061
"""
5. Titled "Error", reads: "Runtime error 217 at 0052B371"
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17888
Summary: CATIA V5R19: Documentation fails to install
Product: Wine
Version: 1.1.18
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
Created an attachment (id=20191)
--> (http://bugs.winehq.org/attachment.cgi?id=20191)
error after clicking install
I'm using Wine 1.1.18 (compiled from source using gcc version 4.3.2 20081105
(Red Hat 4.3.2-7) ) on Fedora 10 i386.
The problem is that documentation for CATIA V5R19 on CD doesn't want to
install.
Steps to reproduce:
1) install CATIA V5R19
2) run setup.exe from documentation cd
3) set default install and click install
4) get an error (attachment)
Terminal output:
D:\>copy "D:\INTEL\*.dll" "C:\windows\temp\TempDSUnloadDoc"
D:\>copy "D:\INTEL\*.exe" "C:\windows\temp\TempDSUnloadDoc"
D:\>copy "D:\install_data\pkgrel.txt" "C:\windows\temp\TempDSUnloadDoc"
D:\>copy "D:\install_data\*.bmp" "C:\windows\temp\TempDSUnloadDoc" /Y
CATCheckVC8Level Check : DI0PANV2.dll
VC8 Level OK
D: is my CD-ROM
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.