http://bugs.winehq.org/show_bug.cgi?id=21464
Summary: Encoding error with License Agreement in .NET 3.5
Installer
Product: Wine
Version: 1.1.37
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: msi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: Mitya57(a)gmail.com
Created an attachment (id=25848)
--> (http://bugs.winehq.org/attachment.cgi?id=25848)
Screenshot of .NET installer
Russian license agreemen't isn't shown properly in Microsoft .NET Framework 3.5
Installer. See the screenshot attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10547
Summary: .NET 3.5 Framework installation problems (msi, bits,
crypt32)
Product: Wine
Version: CVS/GIT
Platform: PC
URL: http://download.microsoft.com/download/6/0/f/60fc5854-
3cb8-4892-b6db-bd4f42510f28/dotnetfx35.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-dotnet
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Created an attachment (id=9300)
--> (http://bugs.winehq.org/attachment.cgi?id=9300)
patch which adds msi.MsiSetExternalUIRecord and
msi.MsiDetermineApplicablePatchesW
Hello,
this (showcase) bug id exists to show/track .NET Framework 3.5 install issues,
e.g. what wine needs to implement/work around.
With VS.NET 2008 and .NET Framework 3.5 released, the Framework 3.5 needs to be
installed first.
Used GIT:
wine --version
wine-0.9.49-331-g7a8eb4c
Prerequisites:
1) set OS config to at least "Windows XP"
2) one volume name (dosdevices/<driveletter>:) must contain "harddisk" or
"ramdisk" and write accessible
cd ~/.wine
mv drive_c harddiskvolume1
cd dosdevices
ln -sf ../harddiskvolume1 c:
The installer then stops at unimplemented msi.MsiSetExternalUIRecord, attached
patch adds simple stub which fixes this.
----
If you downloaded the "small" .NET Framework installer, you now run into a
major showstopper: BITS required
The partial installer depends on: http://bugs.winehq.org/show_bug.cgi?id=5713
What is the consensus regarding native BITS and builtin BITS?
Builtin bits might take some time until it gets into usable state.
Native BITS is described here: http://bugs.winehq.org/show_bug.cgi?id=6194
though I haven't looked at it for some time.
Will native BITS considered abandoned then (needs some nasty workarounds)?
----
If you downloaded the full installer some messages seem to indicate BITS is
used in full installer too, but it doesn't seem to harm now.
--- snip ---
0012:err:ole:create_server class {4991d34b-80a1-4291-83b6-3328366b9097} not
registered
0012:fixme:ole:CoGetClassObject CLSCTX_REMOTE_SERVER not supported
0012:err:ole:CoGetClassObject no class object
{4991d34b-80a1-4291-83b6-3328366b9097} could be created for context 0x17
0012:Ret ole32.CoCreateInstance() retval=80004002 ret=3aea41ed
..
0012:Call advapi32.RegCreateKeyExW(80000001,00563758
L"SOFTWARE\\Microsoft\\VisualStudio\\9.0\\DownloadManager",00000000,00000000,00000000,0002001f,00000000,0034e284,00000000)
ret=3aea8785
0012:Ret advapi32.RegCreateKeyExW() retval=00000000 ret=3aea8785
0012:Call advapi32.RegQueryValueExW(00000290,00563d30
L"BitsOverride",00000000,0034e1c8,0034e1f4,0034e1cc) ret=3aea899a
0012:Ret advapi32.RegQueryValueExW() retval=00000002 ret=3aea899a
--- snip ---
Interestingly there is some undocumented "BitsOverride" which might indicate a
possibility to revert their interal download manager to standard download
procedures.
The showstopper for full installer seem to be various hotfix installers which
are spawned by main installer.
As example I start with hotfix "Windows Imaging Component update" which gets
extracted by installer into
"c:\<guid>\wcu\dotNetFramework\dotNetFX30\WIC_x86_enu.exe" and tries to run it.
This fails and lets overall installer fail too.
It seems to make various specific checks for operating system version/build.
I only quote checks which seem to fail:
--- snip ---
0040:Call KERNEL32.CreateFileA(01104940
"c:\\windows\\system32\\ntoskrnl.exe",80000000,00000001,00000000,00000003,00000000,00000000)
ret=01070767
0040:Ret KERNEL32.CreateFileA() retval=ffffffff ret=01070767
0040:Call KERNEL32.CloseHandle(ffffffff) ret=010708a6
0040:Ret KERNEL32.CloseHandle() retval=00000000 ret=010708a6
--- snip ---
"GetKernelType: GetInternalFilename failed"
--- snip ---
0040:Call KERNEL32.LoadLibraryA(01023c38 "setupapi.dll") ret=0106f709
0040:Ret KERNEL32.LoadLibraryA() retval=615d0000 ret=0106f709
0040:Call KERNEL32.GetProcAddress(615d0000,01023c24 "pSetupIsUserAdmin")
ret=0106f71b
0040:Ret KERNEL32.GetProcAddress() retval=00000000 ret=0106f71b
0040:Call KERNEL32.FreeLibrary(615d0000) ret=0106f72a
0040:Ret KERNEL32.FreeLibrary() retval=00000001 ret=0106f72a
--- snip ---
--- snip ---
0040:Call advapi32.RegOpenKeyExA(80000002,0101e608
"SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Setup\\WindowsFeatures",00000000,00020019,0033b774)
ret=0109191a
0040:Ret advapi32.RegOpenKeyExA() retval=00000002 ret=0109191a
0040:Call KERNEL32.GetLastError() ret=010701ae
0040:Ret KERNEL32.GetLastError() retval=00000078 ret=010701ae
--- snip ---
"GetBuildType, line 1170, RegOpenKeyEx failed with error 0x2"
--- snip ---
0030:Call KERNEL32.LoadLibraryExA(0033b9c4
"c:\\windows\\system32\\pidgen.dll",00000000,00000002) ret=0105d03f
0030:Ret KERNEL32.LoadLibraryExA() retval=00000000 ret=0105d03f
0030:Call KERNEL32.GetLastError() ret=010701ae
0030:Ret KERNEL32.GetLastError() retval=0000007e ret=010701ae
--- snip ---
This is from the log of installer itself to get the idea:
--- snip ---
0.101: Hotfix started with following command line:
0.101: GetKernelType: GetInternalFilename failed
0.102: In Function GetBuildType, line 1170, RegOpenKeyEx failed with error 0x2
0.102: GetGroupIdFromPidGenDll:LoadLibrary failed for
c:\windows\system32\pidgen.dll dll
0.102: CheckSystem_1203: Failed to get product build type.
0.102: DoInstallation: CheckSystem Failed: 0xf117
0.103: WIC installation did not complete.
1.469: Message displayed to the user: WIC installation did not complete.
1.469: User Input: OK
1.469: Update.exe extended error code = 0xf117
1.469: Update.exe return code was masked to 0x643 for MSI custom action
compliance.
--- snip ---
I copied "pigen.dll" from my windows xp installation and it seems to help a
bit, showing that previous checks might be optional?
--- snip ---
0040:Call KERNEL32.LoadLibraryExA(0033b9c4
"c:\\windows\\system32\\pidgen.dll",00000000,00000002) ret=0105d03f
0040:Ret KERNEL32.LoadLibraryExA() retval=003b0001 ret=0105d03f
0040:Call KERNEL32.FindResourceA(003b0001,00000001,0101e2ac "BINK")
ret=0105d059
0040:Ret KERNEL32.FindResourceA() retval=003b54a0 ret=0105d059
0040:Call KERNEL32.LoadResource(003b0001,003b54a0) ret=0105d070
0040:Ret KERNEL32.LoadResource() retval=003b54e0 ret=0105d070
0040:Call KERNEL32.LockResource(003b54e0) ret=0105d07d
0040:Ret KERNEL32.LockResource() retval=003b54e0 ret=0105d07d
0040:Call KERNEL32.FreeResource(003b54e0) ret=0105d0aa
0040:Ret KERNEL32.FreeResource() retval=00000000 ret=0105d0aa
0040:Call KERNEL32.FreeLibrary(003b0001) ret=0105d0b1
0040:Ret KERNEL32.FreeLibrary() retval=00000001 ret=0105d0b1
--- snip ---
Seems "only" the "BINK" resource is read (2 sub chunks)
>From researching a bit this resource seems to be related to the public key(s)
for the product id stuff (elliptic curve cryptography).
No API exports are used (GetProcAddress/...).
And the installer log:
--- snip ---
0.028: 2007/11/23 12:49:19.973 (local)
0.028: C:\036ac5753759f7b22a9a8e26\update\update.exe (version 6.3.4.0)
0.030: Hotfix started with following command line:
0.030: GetKernelType: GetInternalFilename failed
0.031: In Function GetBuildType, line 1170, RegOpenKeyEx failed with error 0x2
0.162: c:\windows\system32\WindowsCodecs.dll is Not Present
0.162: First Condition in Test.WindowsCodecsVer.Section Succeeded
0.162: Condition succeeded for section Test.WindowsCodecsVer.Section in Line 1
of PreRequisite
0.162: c:\windows\system32\WindowsCodecsExt.dll is Not Present
0.162: First Condition in Test.WindowsCodecsExtVer.Section Succeeded
0.162: Condition succeeded for section Test.WindowsCodecsExtVer.Section in Line
2 of PreRequisite
0.163: c:\windows\system32\WMPhoto.dll is Not Present
0.163: First Condition in Test.WMPhotoVer.Section Succeeded
0.163: Condition succeeded for section Test.WMPhotoVer.Section in Line 3 of
PreRequisite
0.164: c:\windows\system32\PhotoMetadataHandler.dll is Not Present
0.164: First Condition in Test.PhotoMetadataHandlerVer.Section Succeeded
0.164: Condition succeeded for section Test.PhotoMetadataHandlerVer.Section in
Line 4 of PreRequisite
0.198: InstallInfCatalogFile: Installing
c:\4cbc8383318bb456e1d38cacd0\update\WIC.cat as _000000_.cat...
0.199: VerifyTargetFileSize: Unable to verify size as Source = NULL for file
c:\windows\_000000_.cat
0.200: InstallCatalogFile: VerifyCatalogFile failed for
c:\windows\_000000_.cat; error=0x00000001.
0.201: InstallInfCatalogFile: Installation failed; error=0x00000002.
0.201: UdpStopService: OpenService failed :0x424
0.201: IsInfFileTrusted: ValidateSingleFileSignature Failed:
STR_FAILED_INF_INTEGRITY
0.201: WIC Setup encountered an error: Setup could not verify the integrity of
the file Update.inf. Make sure the Cryptographic service is running on this
computer.
0.202: DeleteCatalogFile _000000_.cat failed with ERROR 2
0.202: CleanupTrustedInfFile: GetFileAttributes for
c:\windows\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\update_WinXP.cat
failed: 0x3
0.205: Setup could not verify the integrity of the file Update.inf. Make sure
the Cryptographic service is running on this computer.
10.573: Message displayed to the user: Setup could not verify the integrity of
the file Update.inf. Make sure the Cryptographic service is running on this
computer.
10.573: User Input: OK
10.573: Update.exe extended error code = 0xf0da
10.573: Update.exe return code was masked to 0x643 for MSI custom action
compliance.
--- snip ---
The inf/old catalog file problem...
Anyway one can get around by manually copying these 4 files (WindowsCodecs.dll,
WindowsCodecsExt.dll, WMPhoto.dll, PhotoMetadataHandler.dll) before installtion
into system32.
Extract them from the hotfix installer to have version match.
This seems to work around the hotfix issues/catalog problem.
With the files in place before .NET installation this hotfix is skipped and the
installer runs into:
--- snip ---
wine: Call from 0x7b841450 to unimplemented function
msi.dll.MsiDetermineApplicablePatchesW, aborting
--- snip ---
Attached patch fixes this.
After that it gets further only to stop at another hotfix installer "XPSEPSC" -
the catalog install problem.
So I stop for now because it sucks to work around each single hotfix installer.
Should be good enough to give an idea ...
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22883
Summary: implement dbghelp.SymMatchStringA/W (needed by
"Debugging Tools for Windows")
Product: Wine
Version: 1.2-rc1
Platform: x86
URL: http://www.microsoft.com/whdc/devtools/debugging/defau
lt.mspx
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: dbghelp
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
while writing some scripts for cdb from "Debugging Tools for Windows"
toolsuite, the following insufficiency is encountered:
--- snip ---
...
wine: Call from 0x7b835a02 to unimplemented function
dbghelp.dll.SymMatchStringW, aborting
wine: Unimplemented function dbghelp.dll.SymMatchStringW called at address
0x7b835a02 (thread 0034), starting debugger...
--- snip ---
Native dbghelp works around.
It seems there is already an ansi version "SymMatchString" present and exported
(without "A" suffix).
--- snip dlls/dbghelp/symbol.c ---
/******************************************************************
* SymMatchString (DBGHELP.@)
*
*/
BOOL WINAPI SymMatchString(PCSTR string, PCSTR re, BOOL _case)
{
regex_t preg;
BOOL ret;
TRACE("%s %s %c\n", string, re, _case ? 'Y' : 'N');
compile_regex(re, -1, &preg, _case);
ret = match_regexp(&preg, string);
regfree(&preg);
return ret;
}
...
--- snip dlls/dbghelp/symbol.c ---
--- snip dlls/dbghelp/dbghelp.spec ---
...
@ stdcall SymMatchString(str str long)
@ stub SymMatchStringA
@ stub SymMatchStringW
...
--- snip dlls/dbghelp/dbghelp.spec ---
SymMatchStringA -> SymMatchString
It would be nice if the wide character variant SymMatchStringW() could be also
supported.
AFAIK standard POSIX.2 regex lib doesn't support wide character interface, you
have to convert to multibyte string and use ansi version.
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25894
Summary: Free serial port monitor: Reports that I don't have
the required rights to launch the application
Product: Wine
Version: 1.2.2
Platform: x86
URL: http://www.hhdsoftware.com/Download/serial-monitor.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: garywb2002(a)yahoo.com
Program installs but reports errors that it can not start the Device Monitor
Helper Driver and that I don't have the required rights to launch the
application. The help function works if enabled separately via the menu item in
Ubuntu.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10515
Summary: Muvee autoproducer fails to install
Product: Wine
Version: CVS/GIT
Platform: PC
URL: http://www.muvee.com/en/products/ap/ap6_free_trial
OS/Version: Linux
Status: UNCONFIRMED
Keywords: download, Installer
Severity: enhancement
Priority: P2
Component: wine-msi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: xerox_xerox2000(a)yahoo.co.uk
Hi, another "garbage app" sent into the appdb: the installer fails with a
messagebox : Error Number: 0x80020006
Quote from the person who sent it in:
Installshield warns about missing Quicktime and Media player components (it
does that on Windows too unless they're installed but will install and run
without them),then runs through the initial license confirmation and
destination directory selection.
It then aborts with MessageBox:
Error Number: 0x80020006
There was one msi-related fixme message in the console, that appeared when the
messagebox appeared:
fixme:msi:AutomationObject_GetIDsOfNames Unknown member L"version", clsid
{000c1090-0000-0000-c000-000000000046}
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26524
Summary: Muvee Reveal 8, execution from folder causes crash
Product: Wine
Version: 1.3.16
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fcole90(a)gmail.com
Created an attachment (id=33782)
--> (http://bugs.winehq.org/attachment.cgi?id=33782)
log of the application
I made this test trying to run the app from a Windows previus installation,
then I copied the folder on my Wine folder and launched the app.
The applications shows many dialog boxes to report many errors:
1st dialog box)
Application has generated an exception that could not be handed.
Process ID=0x8 (8), Thread ID=0x9 (9).
Click OK to terminate the application.
Click CANCEL to debug the application.
#I click CANCEL
2nd dialog box)
No registered JIT debugger was specified.
Click on Retry to have the process wait while attaching a debugger manually.
Click on Cancel to abort the JIT debug request.
#If I click Retry the dialog appears again or crashes.
#If I press abort the app abort.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26507
Summary: Muvee Reveal finds a problem and doesn't install
Product: Wine
Version: 1.3.16
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: advapi32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fcole90(a)gmail.com
Created an attachment (id=33746)
--> (http://bugs.winehq.org/attachment.cgi?id=33746)
Various fixme on win, advapi and an error on cabinet
I'm not able to run the installer of the application. I tried using native
libraries for: advapi32, cabinet and wininet.
When the installer runs just stops after a screen reporting that found a
critical problem that caused the app to crash.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27944
Summary: DVR CMS SW freezes
Product: Wine
Version: 1.3.25
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: maurelioc(a)astrotec.com.br
The SW attached is a CMS for controlling and viewing images on a DVR (Digital
Video Recording). This type of equipment is very common now in video
surveillance.
The DVRs maybe operated/viewed from a SW in cellular phones, Internet Explorer
with an activex loaded from the DVR and from installable SW called CMS for
Windows OS.
I would apreciate if someone could make it run on Wine.
It installs without error , but when trying to execute the SW freezes.
I can make available a DVR with cameras connected to internet to make tests.
There are other packages to convert videos, play videos , install activex etc.
All chinese made and with minimum documentation. I may send if needed or asked.
Thanks.
Marco Aurelio
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9628
Summary: msiexec command line parsing incorrect
Product: Wine
Version: CVS/GIT
Platform: PC
URL: http://www.enterbrain.co.jp/tkool/RPG_XP/eng/download.ht
ml
OS/Version: Linux
Status: NEW
Keywords: download, regression
Severity: minor
Priority: P2
Component: wine-msi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: thestig(a)google.com
In bug 9615, the reporter mentioned running the setup program to install the
game does not work.
When running SetupMenu.exe, press the "Install RPG Maker XP" button should
launch the installer. In Wine 0.9.33, pressing that button runs:
msiexec /i c:\path\to\RPG Maker XP\Setup2\RPGXP_102a.msi
In Wine 0.9.34, pressing that button runs:
msiexec c:\path\to\RPG Maker XP\Setup2\RPGXP_102a.msi
The regression is caused by:
commit 54c7b7e81b5542f015dc6e71fc6030ba3919f5d3
Author: Aric Stewart <aric(a)codeweavers.com>
Date: Thu Mar 22 08:20:16 2007 -0500
Revert 7c35db07c35db0... msiexec: Use CommandLineToArgvW instead of
process_args to reduce code duplication.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22658
Summary: Movie Magic Screenwriter 2000 crashes when selecting
Program Options
Product: Wine
Version: 1.1.39
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: user32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dimesio(a)earthlink.net
Created an attachment (id=27882)
--> (http://bugs.winehq.org/attachment.cgi?id=27882)
Movie Magic Screenwriter 2000 crash in wine-1.1.44-104-g25d8616
I'm setting the Wine version to 1.1.39 because that's where the regression test
identified the bad patch, but the bug is still present in today's git
(wine-1.1.44-104-g25d8616).
Movie Magic Screenwriter 2000 now crashes when selecting Program Options from
the File menu.
Regression test results:
0e0b704f5b48d1c0bba1f1e0b1e37fd77839c725 is first bad commit
commit 0e0b704f5b48d1c0bba1f1e0b1e37fd77839c725
Author: Alexandre Julliard <julliard(a)winehq.org>
Date: Mon Feb 8 17:44:23 2010 +0100
user32: Do not load 16-bit user.exe by default.
:040000 040000 efe35dc6ec566d8677b01e142290dde76d0d73c6
e0a08872768ea3f142cd2d1fedeb8dafa167c05b M dlls
The same patch was identified in bugs 21825 and 21946; both of those bugs were
closed as fixed by commit f3696e489b8b33011b5a32acf330f0684b6d151a.
Reverting the patch identified by the regression test gets rid of the crash,
but the Program Options box still doesn't appear. Instead, the app throws up a
warning that resources are dangerously low and telling me to close some
programs and possibly reboot. So something else is also going on, but I'm
afraid I don't know how to proceed from here to track it down. I'm happy to run
more tests if someone can tell me what to do.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12297
Summary: Movie Magic Screenwriter 6: Initialization Error
requiring installation of a device driver
Product: Wine
Version: 0.9.56.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: silverscreenwriter(a)gmail.com
Created an attachment (id=11744)
--> (http://bugs.winehq.org/attachment.cgi?id=11744)
Command line error output
I'm running Fedora Core 8. Kernel is 2.6.24.3-50.
I used Add/Remove Software to install Wine 0.9.56.
I then installed, without issue, Movie Magic Screenwriter 6.0. The program's
start-up icon was copied to my desktop.
When I click on the icon, I get the following message:
Initialization Error: "This software requires installation of device driver
TPkd and a reboot before running. Please reboot or reinstall the software."
The above-mentioned driver is installed at
~/.wine/drive_c/windows/system32/drivers/TPkd.sys
A reinstall and/or reboot has no affect.
When I run it from the command line, there is error output, which I have
attached as a plain text file named "WineError.txt". The first line of the
file displays the command entered to start the program.
If you should need any additional information, please contact me via e-mail.
- Harvey
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25746
Summary: Drag & Drop not functioning with Format Factory
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: Reece.vanburen(a)gmail.com
Drag & Drop feature not functioning with Format Factory, otherwise the app is
running well.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27258
Summary: audacity 1.3.12 run time error r6034
Product: Wine
Version: 1.3.20
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fracting(a)gmail.com
Created an attachment (id=34860)
--> (http://bugs.winehq.org/attachment.cgi?id=34860)
Log: audacity runtime error r6034
http://sourceforge.net/projects/audacity/files/audacity-beta/1.3.13/audacit…
$ sha1sum audacity-win-1.3.13.exe
25178e7320ba9f93961fe666dadbc609bc3ed909 audacity-win-1.3.13.exe
audacity is open source, code is available at http://audacity.sourceforge.net/
install audacity and start with wine, then a message box says r6034.
winetricks vcrun2005 works around it.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13214
Summary: No icons on control buttons with Audacity 1.2.6
Product: Wine
Version: 1.0-rc1
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: a.strich.b(a)web.de
Created an attachment (id=13050)
--> (http://bugs.winehq.org/attachment.cgi?id=13050)
console log for start and emmidiate quit of Audacity, warn+all, fixme+all
For Audacity 1.2.6 run under Wine, there are no icons on the control buttons of
the main window, rendering the interface unusable.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28454
Summary: Audacity 1.3 crashes on startup - unimplemented
function
msvcp90.dll.?replace@?$basic_string@DU?$char_traits@D@
std@@V?$allocator@D@2@@std@@QAEAAV12@IIABV12@@Z
Product: Wine
Version: 1.3.28
Platform: x86-64
URL: http://audacity.googlecode.com/files/audacity-win-unic
ode-1.3.13.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: msvcp
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: RandomAccountName(a)mail.com
On startup, Audacity briefly shows a "scanning VST plugins" window, then
crashes:
wine: Call from 0x7b83b4c2 to unimplemented function
msvcp90.dll.?replace@?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QAEAAV12@IIABV12@@Z,
aborting
wine: Unimplemented function
msvcp90.dll.?replace@?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QAEAAV12@IIABV12@@Z
called at address 0x7b83b4c2 (thread 0039), starting debugger...
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10686
Summary: Marangatu fails with "Object doesn't support this
action"
Product: Wine
Version: 0.9.50.
Platform: PC-x86-64
URL: http://www.set.gov.py/set_htm/softwares/descargas/marang
atui/instalador.exe
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: wine-ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ben(a)atomnet.co.uk
Created an attachment (id=9523)
--> (http://bugs.winehq.org/attachment.cgi?id=9523)
Full terminal log
The eset.exe fails to start, bringing up a message box saying that Runtime
Error 445, Object doesn't support this action and then Wine pagefaults. Full
terminal output and error message attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23577
Summary: Kaspersky Internet Security 2010 installation problem:
need Wins Xp SP 2
Product: Wine
Version: 1.2-rc6
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bojan(a)antonovic.ch
kis9.0.0.736 gives the following line on the console:
err:msi:ITERATE_Actions Execution halted, action L"ErrorXPSP2RequiredShow"
returned 1603
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19324
Summary: Get a Wine Error popup when trying to build a UBCD4Win
iso
Product: Wine
Version: 1.1.25
Platform: PC
URL: http://www.ubcd4win.com/
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: franks(a)montgomery.edu
Created an attachment (id=22375)
--> (http://bugs.winehq.org/attachment.cgi?id=22375)
wine: Unhandled page fault on read access
The application itself installs fine in Wine version 1.1.23 and 1.1.25 on Suse
Linux Enterprise Desktop 11. I can get in and enable and disable plugins but
when I try to build a CD I get the Wine Error popup saying that "The program
UBCDWinBuilder.exe has encountered a serious problem and needs to close." I get
this error running in cli and double clicking on the exe. Now before I get the
pop I notice the application gets an error when opening up a hive while
building the registry. This happens so fast I can not see the full error in the
application before it crashes and the popup is produced. Went back and ran
under cli wine UBCD4WinBuilder.exe WINEDEBUG=warn+all &> log.txt and I am
suppling those to you for your reading pleasure.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23732
Summary: Error when trying to build a UBCD4Win iso
Product: Wine
Version: 1.2
Platform: x86
URL: http://www.ubcd4win.com/
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: leonik3(a)o2.pl
Error when trying to build a UBCD4Win iso
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22124
Summary: BartPE: crashes when trying to make "Build"
Product: Wine
Version: 1.1.41
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lxandr(a)ua.fm
Created an attachment (id=26980)
--> (http://bugs.winehq.org/attachment.cgi?id=26980)
terminal output
I launch "pebuilder.exe", everything goes fine. But when I press "Build" button
after a few seconds (screenshot1) application crashes (screenshot2).
Looks like there are some issues with registry creation, .inf files parsing
functions, etc.
Tested and didn't worked in any of these combinations: pebuilder 3.1.10a,
3.1.10; building PE from windows 2003 sp2, windows xp sp3.
Wine is installed from http://ppa.launchpad.net/ubuntu-wine/ppa/ubuntu
repository.
A few Wine updates earlier the problem still existed.
BartPE can be downloaded from here:
http://www.nu2.nu/pebuilder/#download
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28729
Bug #: 28729
Summary: EasyBCD: bcdedit complains about lack of privileges
Product: Wine
Version: 1.3.29
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: andrea.lazzarotto(a)gmail.com
Classification: Unclassified
I tried to use two softwares which make use of bcdedit.exe. Those are:
EasyBCD - http://neosmart.net/dl.php?id=1 (free non-commercial version)
Sardu - http://www.sarducd.it/
Both of them use bcdedit.exe in order to open bcd files, such as those present
on Windows Recovery discs. In both cases I get the same error message, which
should be this:
"Privilege not held"
(my system is in Italian so I'm not sure about the exact words)
Of course Wine doesn't have a BCD file, but EasyBCD asks me if I want to open
one and when I point it to the location I get the error.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29042
Bug #: 29042
Summary: Regression; Code-8 Initialization
Product: Wine
Version: 1.3.32
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mcgraw5058(a)bellsouth.net
Classification: Unclassified
Apogee Components RockSim, version 9.1.1.118, using Wine 1.3.32. Program fails
to start and displays small dialog saying "Code-8" Initialization error. Wine
1.3.31 worked fine.
Engine Editor also affected in same way.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29002
Bug #: 29002
Summary: GPU-Z v0.5.5 crashes at launch
Product: Wine
Version: 1.3.32
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: testing.tigerwolf(a)mail.com
Classification: Unclassified
Created attachment 37327
--> http://bugs.winehq.org/attachment.cgi?id=37327
GPU-Z v0.5.5 crashes at launch
GPU-Z crashes at launch with the following error message :
wine: Unhandled page fault
"GPU-Z program has encountered a serious problem and needs to close"
(see attachments for more details)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19040
Summary: AOL cd installer crashes on launch
Product: Wine
Version: unspecified
Platform: PC
URL: http://www.aol.com
OS/Version: Linux
Status: NEW
Keywords: Installer
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=21963)
--> (http://bugs.winehq.org/attachment.cgi?id=21963)
+relay,+seh,+tid
Got an AOL cd installer in the mail (holy crap, they're still alive?!?) a while
back, decided to see what it would do in wine...Running 'wine AOLSETUP.EXE'
bombs out pretty quickly with a crash. +relay,+seh,+tid attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13677
Summary: SmartFTP 3.0: crash on startup
Product: Wine
Version: 1.0-rc3
Platform: PC
URL: http://www.smartftp.com/get/SFTPMSI.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: baryluk(a)smp.if.uj.edu.pl
Created an attachment (id=13677)
--> (http://bugs.winehq.org/attachment.cgi?id=13677)
Debug log.
Log in attachment
baryluk@tytus:~/.wine/drive_c/Program Files/SmartFTP Client$ WINEDEBUG=warn+dll
wine ./SmartFTP.exe 2>&1 | tee debugowanie.txt
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12461
Summary: SmartFTP Client requires an implementation of
cryptui.dll
Product: Wine
Version: CVS/GIT
Platform: PC
URL: http://www.smartftp.com/download/
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: nodisgod(a)yahoo.com
An attempt to start the SmartFTP client fails because of missing cryptui.dll.
While copying the DLL from an installation of Windows XP satisfies the
application enough to get it to run, cryptui.dll is as far as I'm aware not
redistributable and thus using native cryptui.dll is not always tenable.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13487
Summary: Smartftp does not run (dogfood)
Product: Wine
Version: 1.0-rc2
Platform: PC
URL: http://www.smartftp.com/
OS/Version: Linux
Status: NEW
Keywords: download
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=13410)
--> (http://bugs.winehq.org/attachment.cgi?id=13410)
Terminal output in git
Reported in wine-users:
SmartFTP installs but fails to start with: "Fatal Error: sfFTPLib.dll is not
registered correctly"
http://www.smartftp.com/download/
System: Fedora 9
Wine: 1.0 rc2
Gave it a try. Installs fine, after installing, running regsvr32 on
sfFTPLib.dll gets it to run a bit, then installs wine gecko. Runs a bit more,
then crashes. Terminal output and backtrace attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26031
Summary: µTorrent (uTorrent) fails listening to a port after a
number of persistent connections are opened against it
Product: Wine
Version: 1.3.13
Platform: All
URL: http://www.utorrent.com/
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wineserver
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: t.artem(a)mailcity.com
Steps to reproduce:
1) Run µTorrent
2) Incoming connections icon should turn green (port listen: OK), netstat -ln
confirms that
3) Start downloading any torrent
4) Incoming connections icon will turn red (Listen error: you should change the
listen port)
observe these errors logged in uTorrent Logger Tab:
[2011-02-09 02:28:50] *** Starting Diagnostic thread ***
[2011-02-09 02:28:50] IPv6 is installed
[2011-02-09 02:31:46] TCP port bind failed 0.0.0.0:9001: (10048) Error 10048
[2011-02-09 02:32:12] TCP port bind failed 0.0.0.0:9001: (10048) Error 10048
at this point neither Wine, nor µTorrent will be listening to the designated
port:
# netstat -ln -eep | grep 8008
udp 0 0 0.0.0.0:8008 0.0.0.0:*
500 117033 10470/uTorrent.exe
so while uTorrent is listening to the incoming UDP connections, TCP traffic is
unmanaged causing the errors in the µTorrent's Logger Tab.
The strangest thing is that no other application will be able to use this port
(8008):
# nc -vl 8008
nc: Address already in use
However if I order nc to bind to the loopback interface specifically, it will
run:
# nc -vl localhost 8008
[running]
It's worth noting that when wine/uTorrent "listen" abilities break, there are
already some established connections to my_external_IP_address:8008 (right now
I see three such ESTABLISHED connections).
So, probably there's some sort of bug in wine server - it shouldn't stop
listening to a port when persistent connections are made to it - but I'm
totally uncertain about it because I have no idea how wine server (should)
handles TCP traffic.
I can help solving this bug by attaching any required debug information if it's
necessary.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18303
Summary: Adobe Acrobat Pro 7: Crashes when selecting the "edit"
menu while having a file open.
Product: Wine
Version: 1.1.20
Platform: PC-x86-64
URL: http://ardownload.adobe.com/pub/adobe/acrobat/win/7x/7.0
/misc/AcTR7EFG.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: waltherbans(a)yahoo.de
Created an attachment (id=20834)
--> (http://bugs.winehq.org/attachment.cgi?id=20834)
This it what is printed out when I started Acrobat via Terminal, opened a
pdf-file and clicked on "edit" menu
Selecting the "edit" menu when Acrobat has a file open causes it to crash.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12659
Summary: Preferences window missing all user-modifiable settings
in Acrobat V7.0 Pro
Product: Wine
Version: 0.9.58.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: winebugs(a)q51.org
After installing normally, start Acrobat. Give the application some time to
display any notices about pending updates, etc., and clear them. There is no
need to load a file; this bug pertains to the preferences for the application
itself, not a PDF that's been loaded.
By going to the Edit menu and selecting the "Preferences..." option (or via the
shortcut CTRL + K) it's possible to bring up the Preferences window, but only
the "Categories" listbox control and text label are displayed (on the left-hand
side of the Preferences window), along with OK and Cancel buttons. The
right-hand side of the window, which should display a variety of controls that
change for each category the user selects, is completely blank and displays
only as the window's background color.
I am testing with a stock, plain Debian and Wine installation. No tricks or
borrowed DLLs involved.
My Wine version:
wine-0.9.58 (the latest available to me as a Debian user)
My distro:
A plain install of Debian 4.0r3 (Etch)
Uname -a output:
Linux test 2.6.18-6-686 #1 SMP Sun Feb 10 22:11:31 UTC 2008 i686 GNU/Linux
Wine package retrieved from:
wine.budgetdedicated.com:
Wine package name:
wine_0.9.58~winehq0~debian~4.0-1_i386.deb
Windows application being tested:
Adobe Acrobat Professional V7.0.0, off a factory-pressed, genuine CD
Launching from the default application installation directory with:
wine ./Acrobat.exe
The console output I see at the moment the Preferences window appears is:
err:ole:CoGetClassObject class {b5f8350b-0548-48b1-a6ee-88bd00b4a5e7} not
registered
err:ole:create_server class {b5f8350b-0548-48b1-a6ee-88bd00b4a5e7} not
registered
fixme:ole:CoGetClassObject CLSCTX_REMOTE_SERVER not supported
err:ole:CoGetClassObject no class object {b5f8350b-0548-48b1-a6ee-88bd00b4a5e7}
could be created for context 0x15
err:ole:CoGetClassObject class {b5f8350b-0548-48b1-a6ee-88bd00b4a5e7} not
registered
err:ole:create_server class {b5f8350b-0548-48b1-a6ee-88bd00b4a5e7} not
registered
[[[...the above 4 lines are repeated 4 more times...]]]
fixme:ole:CoGetClassObject CLSCTX_REMOTE_SERVER not supported
err:ole:CoGetClassObject no class object {b5f8350b-0548-48b1-a6ee-88bd00b4a5e7}
could be created for context 0x15
err:comboex:COMBOEX_WindowProc unknown msg 042a wp=00050000 lp=00030100
err:comboex:COMBOEX_WindowProc unknown msg 042a wp=00050000 lp=00030110
fixme:system:SystemParametersInfoW Unimplemented action: 95
(SPI_GETSNAPTODEFBUTTON)
The "lp" values in the "unknown msg" error (2nd-last and 3rd-last lines above)
are the only things that change from one application launch to another.
I tried hard to gather more information about this bug with the command
"WINEDEBUG=+relay wine ./Acrobat.exe" but the only way I had to catch the
information was via the console's history, and that nearly brought my system to
its knees after it accumulated more than 170MB worth of data. Most of that
data was the result of KERNEL32.GetLastError, .FlsGetValue, and .SetLastError
messages repeatedly incessantly. If someone can tell me how I can prevent
those messages from appearing that would drop the size of the output.
One more thing to note: I tested for the same bug with Acrobat Reader V7.0.9
-- which is available for free from adobe.com -- and I see the exact same bug,
with the exact same console output. That may be useful to know if anyone is
interested in confirming this bug.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18302
Summary: Adobe Acrobat Pro 7: Preferences-Window is broken
Product: Wine
Version: 1.1.20
Platform: PC-x86-64
URL: http://ardownload.adobe.com/pub/adobe/acrobat/win/7x/7.0
/misc/AcTR7EFG.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: waltherbans(a)yahoo.de
When you clicking on "Edit"->"Preference" in Adobe Acrobat Professional 7 a
grey box will pop up, listing the Preference's categories in the left. Clicking
on an item gives a message box saying:
"The value of the magnification must be "Actual Size", "Fit Page", "Fit Width",
"Fit Visible", "Automatic", or a value between 8,33% and 6400%."
Noting else happens.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17120
Summary: Synful Orchestra: crash when run
Product: Wine
Version: 1.1.13
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntoskrnl
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: amranello(a)gmail.com
Wine crash when I run Synful Orchestra in dssi-vst.
Trial Synful Orchestra download http://www.synful.com/Download.htm
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16671
Summary: Revit Architecture 2009: Installation fails with call
not implemented
Product: Wine
Version: 1.1.11
Platform: PC-x86-64
URL: http://students.autodesk.com
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: netbox(a)pi-xi.net
Created an attachment (id=18299)
--> (http://bugs.winehq.org/attachment.cgi?id=18299)
wine output into console
AutoDesk Revit Architecture 2009 installation fails.
Everything works up to the part where the installer begins copying files. It
manages to install .NET 2.0 and after that reports that installation failed
with a "Call not implemented" -error. The produced log by the installer is very
vague.
This bug is an exact replica of installation failure with Revit Architecture
2008.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17161
Summary: Provide lodctr.exe tool to prevent misleading process
spawn failure console messages (.NET installers)
Product: Wine
Version: 1.1.13
Platform: Other
URL: http://www.microsoft.com/downloads/details.aspx?FamilyID
=262d25e3-f589-4842-8157-034d1e7cf3a3
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
a minor nuisance that can be easily fixed...
I had to add notes to .NET Framework appdb entries because people wrote about
messages which looked like install errors to them.
--- snip ---
wine: could not load L"C:\\windows\\system32\\lodctr.exe": Module not found
--- snip ---
Such failures are in fact harmless, not relevant to overall installer status.
"lodctr.exe" is a simple command line executable for loading performance data
into registry.
It is often called from .NET Framework v1.x, 2.x, 3.x installers.
MSDN info:
http://technet.microsoft.com/en-us/library/bb490926.aspxhttp://msdn.microsoft.com/en-us/library/aa934371.aspx
--- quote ---
The loading function of lodctr, LoadPerfCounterTextStrings, is declared in
Loadperf.h and exported from Loadperf.dll. You can call this function directly
from your install program.
The following example shows the syntax for this function.
LONG LoadPerfCounterTextStrings(
LPSTR lpCommandLine,
BOOL bQuietModeArg
);
The lpCommandLine parameter is the name of your .ini file.
The bQuietModeArg parameter is a Boolean value that specifies whether to
display output during the loading of the text strings for the counter.
--- quote ---
MSDN note suggests that this command line tool is only a thin wrapper which
simply calls LoadPerfCounterTextStrings() as workhorse, passing/forwarding the
command line as-is.
It should be easy to add this tool - even with LoadPerfCounterTextStringsA/W
being stubs - to silence installers which try to spawn it.
Typical installer logs:
--- snip ---
1: 0 2: C:\windows\system32\lodctr.exe
C:\windows\Microsoft.NET\Framework\v2.0.50727\_Networkingperfcounters.ini;18;C:\windows\system32\
3: 4: 5: 6: 7: 8: 9: 10:
Action 21:27:31: RunProcess. Installing Performance Counters for ".NET CLR
Networking"
...
--- snip ---
--- snip ---
...
1: 0 2: C:\windows\system32\lodctr.exe
"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\_TransactionBridgePerfCounters.ini";dummy;C:\windows\system32\ 3:
4: 5: 6: 7: 8: 9: 10:
1: C:\windows\system32\lodctr.exe
"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\_TransactionBridgePerfCounters.ini" 2:
1: 0 2: C:\windows\system32\lodctr.exe
"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\_TransactionBridgePerfCounters.ini";dummy;C:\windows\system32\ 3:
4: 5: 6: 7: 8: 9: 10:
1: 0 2: C:\windows\system32\lodctr.exe
"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\_TransactionBridgePerfCounters.ini";dummy;C:\windows\system32\ 3:
4: 5: 6: 7: 8: 9: 10:
...
--- snip ---
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19741
Summary: Autodesk Revit 2010 (64bit) installation fails
Product: Wine
Version: 1.1.27
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: winehq(a)pi-xi.net
Created an attachment (id=23088)
--> (http://bugs.winehq.org/attachment.cgi?id=23088)
Wine console output during the installation
As with earlier versions of Revit, also 2010 installation fails.
Everything works up to the part where the installer begins copying files.
Unlike with the earlier versions, this time there's an unhandled exception.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16956
Summary: Lexware: Installation of .Net 2.0 SP 1 fails
Product: Wine
Version: 1.1.11
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: koesterreich(a)gmx.net
Created an attachment (id=18728)
--> (http://bugs.winehq.org/attachment.cgi?id=18728)
The error-message
I am trying to install Lexware financial office Pro 2009 [1]
I installed some stuff via winetricks-20081223:
winetricks msxml3 jet40 mdac28 dotnet20 winxp
The installation fails with
"An error occured during the installation of the component Microsoft .Net
Framework 2.0 - Service Pack 1.
Errorcode: 1603
Installation of 'Microsoft .Net Framework 2.0 - Service Pack 1' failed.
The setup will be cancelled." (Translated from German,, see appended
Screenshot)
[1] Lexware in AppDB:
http://appdb.winehq.org/objectManager.php?sClass=application&iId=5505
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10376
Summary: recent winsock SO_REUSEADDR patch reveals parameter
handling problem in WS_setsockopt
Product: Wine
Version: CVS/GIT
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: wine-net
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
seems recent winsock SO_REUSEADDR patch
--- snip ---
URL:
http://source.winehq.org/git/wine.git/?a=commit;h=58b030c270e68c4e130a7decb…
Author: Kai Blin <kai.blin <at> gmail.com>
Date: Sat Nov 3 08:45:12 2007 +0100
ws2_32: Map SO_REUSEADDR.
BSD socket SO_REUSEADDR is not a complete match, but features like
"allow binding to a port immediately after closing it" seem to be
compatible.
--- snip ---
triggers a code path in WS_setsockopt() which leads to crash.
The cause is an application bug.
EvenBalance PunkBuster "PnkBstrA" service which creates local communication
sockets accidentally passes the value instead of value address to
WS_setsockopt().
The services can be installed and tested with their "pbsvc.exe" tool from
http://www.evenbalance.com/downloads/pbsvc/pbsvc.exe
--- snip ---
..
0015:trace:winsock:WS_setsockopt socket: 005c, level 0xffff, name 0x4, ptr 0x1,
len 1
0015:trace:seh:raise_exception code=c0000005 flags=0 addr=0x76587df5
0015:trace:seh:raise_exception info[0]=00000000
0015:trace:seh:raise_exception info[1]=00000001
0015:trace:seh:raise_exception eax=00000001 ebx=7658e11c ecx=00000002
edx=00000004 esi=0000ffff edi=00000001
0015:trace:seh:raise_exception ebp=617c57a4 esp=617c574c cs=0073 ds=007b
es=007b fs=0033 gs=003b flags=00210293
0015:trace:seh:call_stack_handlers calling handler at 0x7bc38810 code=c0000005
flags=0
--- snip ---
Their source code snippet probably looks like this:
--- snip ---
if (setsockopt( sock, .., ..., (char*)value, value_len) != SOCKET_ERROR)
--- snip ---
Instead of this:
--- snip ---
if (setsockopt( sock, .., ..., (char*)&value, value_len) != SOCKET_ERROR)
--- snip ---
Micro$oft "fixes" such crappy^H^H^H^H^H^Hbuggy applications by using SEH to
catch invalid pointer dereferencing.
If you execute a hand-crafted WS_setsockopt() test case with invalid pointer
value in Windows you will see something like this:
--- snip ---
First-chance exception at 0x719b5280 (mswsock.dll) in test.exe: 0xC0000005:
Access violation reading location 0x00000001.
--- snip ---
Returned last error is WSAEFAULT (bad pointer value/address supplied).
Solution: either wrap the whole function within structured exception handler
(SEH) or use IsBadReadPtr() on passed pointer and return WSAEFAULT if fishy.
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12954
Summary: Autodesk Design Review - Not Installing
Product: Wine
Version: 0.9.59.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: chris(a)ncode.com.au
Created an attachment (id=12700)
--> (http://bugs.winehq.org/attachment.cgi?id=12700)
Wine command line output
This product is an industry standard for communication of CAD designs. It is
also freeware from Adobe and can be downloaded from here if needed for
debugging:
http://download.autodesk.com/esd/designreview/SetupDesignReview2009.exe
It does not install. After starting and all the installation questions have
been answered, the installer crashes (see output in attached file)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12999
Summary: 3d studio MAX 9 trial installer crash when starting up
RaySat service?
Product: Wine
Version: CVS/GIT
Platform: Other
URL: http://www.soft32.com/download_81704.html
OS/Version: other
Status: NEW
Keywords: download, Installer
Severity: normal
Priority: P2
Component: advapi32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
This seems to be the next problem after bug 12597:
rm -rf .wine
sh winetricks -q corefonts dotnet20 cc580 vcrun2003 vcrun6 wsh56
wine 3dsmax9Trial.exe
cd .wine/drive_c/3dsmax9Trial/
wine Setup.exe
aborts for me near the very end, saying
err:msi:ITERATE_StartService Failed to start service L"mi-raysat_3dsmax9_32"
err:msi:ITERATE_Actions Execution halted, action L"InstallFinalize" returned
1627
(even if you uncheck the "start raysat service" checkbox in the installer).
After that, starting wine, even with a bogus command, complains similarly:
$ wine-git/wine xyzzy
...
fixme:advapi:RegisterEventSourceA ((null),"RaySat_3dsmax9_32 Server"): stub
...
err:eventlog:ReportEventW L"(1458) RegisterServiceCtrlHandler: Service does not
exist (0x424)"
It seems that raysat_3dsmax9_32server.exe starts up, tries to do
trace:service:OpenServiceW 0x119d98 L"RaySat_3dsmax9_32Server" 32768
which fails, presumably because the service isn't up yet?
(Why isn't it doing CreateService? Perhaps it's probing
to make sure it's not already started up once. But if that's so, why
does it just exit without creating the service?)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12597
Summary: 3d studio MAX 9 trial installer crash
Product: Wine
Version: CVS/GIT
Platform: Other
URL: http://3dsmaxtrial.autodesk.com/3dsmax9trial/3dsmax9Tria
l.exe
OS/Version: other
Status: NEW
Keywords: download, Installer
Severity: normal
Priority: P2
Component: msi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
The trial installer gets further now, but still crashes.
With today's wine from git, I did
rm -rf .wine
sh winetricks corefonts dotnet20 cc580 vcrun2003
wine 3dsmax9Trial.exe
cd .wine/drive_c/3dsmax9Trial/
wine Setup.exe
After about five minutes, it got to the dialog that asks
questions; after entering your name, etc, it crashed like this:
Unhandled exception: page fault on read access to 0x00000001 in 32-bit code
(0xb7e5f588).
Backtrace:
=>1 0xb7e5f588 vsnprintfW+0x458(str=0xb43a7a, len=0x64, format=0x7ec7c700,
valist=) [libs/wine/string.c:376] in libwine.so.1 (0x0033eb2c)
2 0x7ec4ec63 MSI_QueryGetRecord+0xa3(db=0x12e2f0, fmt=0x7ec7c700)
[dlls/msi/msiquery.c:224] in msi (0x0033eb6c)
3 0x7ec2c33e msi_dialog_seltree_handler+0x6e(dialog=0xac8e68,
control=0x3a30620, param=) [dlls/msi/dialog.c:2073] in msi (0x0033eb9c)
4 0x7ec2f09b MSIDialog_WndProc+0x1db(hwnd=0xa0042, msg=0x4e, wParam=0x0,
lParam=0x33ef2c) [dlls/msi/dialog.c:3362] in msi (0x0033ecbc)
...
376 while (*striter)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11420
Summary: service control manager API problem: name of named
objects might differ (client vs. service process)
Product: Wine
Version: 0.9.54.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: advapi32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Created an attachment (id=10552)
--> (http://bugs.winehq.org/attachment.cgi?id=10552)
patch which fixes client vs. service SCM API when using named objects
Hello,
there seems to be a misconception in usage of names for named objects in
service control manager API.
Some people might have experienced such situation: wine hangs for several
seconds on startup (when starting services).
I usually disabled autostart type services (except for builtin ones) and the
problems went away.
Lately while fixing Microsoft Visual Studio .NET installers (2002/2003/2005)
this problem became more and more annoying because the installers and VS.NET
depend on some services, namely "debug manager" (service has to be running).
Consider the following snippet with "service_get_event_handle" trace message
added by me to highlight the problem:
0x9: client (net.exe)
0x11: service process (mdm.exe)
0x12: dispatcher thread
--- snip trace ---
..
0009:trace:advapi:OpenSCManagerW ((null),(null),0x000f003f)
0009:trace:advapi:sc_handle_alloc sc_handle type=0 -> 0x121450
0009:trace:advapi:OpenSCManagerW returning 0x121450 (access : 0x000f003f)
0009:trace:advapi:OpenServiceA 0x121450 "mdm" 983103
0009:trace:advapi:OpenServiceW 0x121450 L"mdm" 983103
0009:trace:advapi:sc_handle_alloc sc_handle type=1 -> 0x121488
0009:trace:advapi:OpenServiceW returning 0x121488
0009:trace:advapi:GetServiceDisplayNameA 0x121450 "mdm" 0x34ee48 0x34fe48
0009:trace:advapi:GetServiceDisplayNameW 0x121450 L"mdm" 0x1214b8 0x34ee08
The Machine Debug Manager service is starting.
0009:trace:advapi:StartServiceA (0x121488,0,(nil))
0009:trace:advapi:StartServiceW 0x121488 0 (nil)
0009:trace:advapi:LockServiceDatabase 0x121450
0009:trace:advapi:LockServiceDatabase returning 0x3c
0009:trace:advapi:service_start_process service_get_event_handle(L"mdm"): 0x40
0011:trace:advapi:LookupPrivilegeValueW L"",L"SeDebugPrivilege",0x34fc80
0011:trace:advapi:LookupPrivilegeValueW L"" -> 00000000-00000014
0011:trace:advapi:AdjustTokenPrivileges
0011:trace:advapi:StartServiceCtrlDispatcherA 0x34fc9c
0011:trace:advapi:service_run_threads Starting 1 pipe listener threads.
Services running as process 16
0012:trace:advapi:service_control_dispatcher 0x121ea8 L"Machine Debug Manager"
0012:trace:advapi:service_control_dispatcher service_get_event_handle(L"Machine
Debug Manager"): 0x48
0009:trace:advapi:UnlockServiceDatabase 0x3c
0009:trace:advapi:StartServiceW returning 0
The Machine Debug Manager service failed to start.
0009:trace:advapi:CloseServiceHandle 0x121488
0009:trace:advapi:sc_handle_destroy_service destroying service 0x121488
0009:trace:advapi:CloseServiceHandle 0x121450
0009:trace:advapi:sc_handle_destroy_manager destroying SC Manager 0x121450
000d:trace:advapi:service_run_threads last user process exited, shutting down
0011:trace:advapi:service_run_threads last user process exited, shutting down
--- snip trace ---
When a service is started, named objects are created to internally communicate
data/events from the service process (dispatcher) to client side SCM API and
vice versa.
Unfortunately there exist service proccesses which pass service names to
dispatcher table (StartServiceCtrlDispatcher) not matching the service name on
the client side (registry "Services" key).
--- snip dlls/advapi32/service.c ---
static DWORD WINAPI service_control_dispatcher(LPVOID arg)
{
service_data *service = arg;
LPWSTR name;
HANDLE pipe, event;
TRACE("%p %s\n", service, debugstr_w(service->name));
/* create a pipe to talk to the rest of the world with */
name = service_get_pipe_name(service->name); <--------- *problem*!
pipe = CreateNamedPipeW(name, PIPE_ACCESS_DUPLEX,
PIPE_TYPE_BYTE|PIPE_WAIT, 1, 256, 256, 10000, NULL );
if (pipe==INVALID_HANDLE_VALUE)
ERR("failed to create pipe for %s, error = %d\n",
debugstr_w(service->name), GetLastError());
HeapFree(GetProcessHeap(), 0, name);
/* let the process who started us know we've tried to create a pipe */
event = service_get_event_handle(service->name); <--------- *problem*!
SetEvent(event);
CloseHandle(event);
..
--- snip dlls/advapi32/service.c ---
As result, different named objects are created and signaled so the client side
can't communicate with the service side using named pipe and events.
This leads to infamous timeout problem (30 sec) and service startup failing.
In case of Microsoft Debug Manager the service is called "mdm" (registry).
The service process itself passes "Microsoft Debug Manager" as name to dispatch
table (see first trace).
Problem: how can both sides communicate a "common" name for named objects?
The service dispatcher part on the service side has only dispatch table data
available which doesn't help much.
I thought about this problem and found a feasible solution ... well call it
"hack" whatever.
If the client side API passes the service name in one of the process startup
parameter members before process creation, the service process' dispatcher
routine is able to access this data and create the named objects used for
communication.
I (ab)used startupinfo "title" member because only wine itself make exclusive
use of most service process startup parameters.
If not considered safe, use reserved/undoc fields...
With that patch applied the services in question start fine and can be
controlled using "net" commands.
No more hangs ;-)
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12079
Summary: VS.NET7.x/.NET SDK installers fail if re-executed due
to ACTION_StopServices being a stub
Product: Wine
Version: CVS/GIT
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: msi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
.NET Framework SDK, VS.NET 7.x. etc. install "helper" service(s) which get
automagically started.
The installers die if executed again (update/change config) because the running
service blocks file update.
--- snip ---
..
err:msi:ACTION_InstallFiles Failed to copy L"Z:\\mnt\\iso\\Program
Files\\Common Files\\Microsoft Shared\\VS7Debug\\msdbg2.dll" to L"c:\\Program
Files\\Common Files\\Microsoft Shared\\VS7Debug\\msdbg2.dll" (32)
err:msi:ITERATE_Actions Execution halted, action L"InstallFinalize" returned
1603
..
--- snip ---
James, if you find the time, please add "stop services" msi action
implementation (dlls/msi/action.c:ACTION_StopServices).
Although I have a patch, I constantly forget to apply it when tracking down
installer problems.
You could actually help to reduce my patch orgy :)
Thanks.
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12390
Summary: err:service:service_control_dispatcher failed to create
pipe for L"C-Dilla_CdaC11BA", error = 231
Product: Wine
Version: 0.9.58.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: amaramrahul(a)gmail.com
"Longman Dictionary of Contemporary English" (ISBN 0 582 50673 5) gets
installed properly from CD-ROM using wine. However when I try to run it using
wine, I get the below error in console:
# wine "C:\Program Files\Longman\LDOCE\ldoce.exe"
err:service:service_control_dispatcher failed to create pipe for
L"C-Dilla_CdaC11BA", error = 231
err:service:service_control_dispatcher failed to create pipe for
L"C-Dilla_CdaC11BA", error = 231
Then a pop-up appears with the message:
"This machine must be re-booted before this product will run correctly. Reboot
now?".
Upon clicking "Yes"/"No", the program exits. I think this has to do something
with copyright. Not sure about this though.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14594
Summary: crypt32.CryptHashMessage needed for VS.NET 2005
(deployment project type creation)
Product: Wine
Version: CVS/GIT
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: crypt32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
using project wizard to create a "setup/deployment" project type (msi), it
bails due to unimpl crypt32.CryptHashMessage
--- snip ---
..
003f:trace:loaddll:load_native_dll Loaded L"C:\\Program Files\\Microsoft Visual
Studio 8\\Common7\\Tools\\Deployment\\dpplg.dll" at 0x5d010000: native
003f:trace:loaddll:load_native_dll Loaded L"C:\\Program Files\\Microsoft Visual
Studio 8\\Common7\\Tools\\Deployment\\1033\\dpplgui.dll" at 0x5d380000: native
003f:trace:loaddll:load_native_dll Loaded L"C:\\Program Files\\Microsoft Visual
Studio 8\\Common7\\Tools\\Deployment\\dpedt.dll" at 0x5ce70000: native
003f:trace:loaddll:load_native_dll Loaded L"C:\\Program Files\\Microsoft Visual
Studio 8\\VJ#\\bin\\vjsplg.dll" at 0x6ca90000: native
003f:trace:loaddll:load_native_dll Loaded L"C:\\Program Files\\Microsoft Visual
Studio 8\\VJ#\\bin\\1033\\vjsplgui.dll" at 0x6cbc0000: native
003f:trace:seh:raise_exception code=80000100 flags=1 addr=0x7b8432e0
003f:trace:seh:raise_exception info[0]=60b7f840
003f:trace:seh:raise_exception info[1]=60b7fa01
wine: Call from 0x7b8432e0 to unimplemented function
crypt32.dll.CryptHashMessage, aborting
003f:trace:seh:call_stack_handlers calling handler at 0x5cdea7c5 code=80000100
flags=1
003f:trace:seh:call_stack_handlers handler at 0x5cdea7c5 returned 1
003f:trace:seh:call_stack_handlers calling handler at 0x5cdf1732 code=80000100
flags=1
..
--- snip ---
MSDN: http://msdn.microsoft.com/en-us/library/aa380203.aspx
--- stub test ---
031:Call
crypt32.CryptHashMessage(002fd208,00000001,00000001,002fd2e0,002fd2dc,002fd260,002fd248,002fd2f4,002fd2d8)
ret=5cdd6009
0031:fixme:crypt:CryptHashMessage (0x2fd208, 1, 1, 0x2fd2e0, 0x2fd2dc,
0x2fd260, 0x2fd248, 0x2fd2f4): stub
0031:Ret crypt32.CryptHashMessage() retval=00000000 ret=5cdd6009
--- stub test --
Simple stub seems to satisfy it.
For a better stub: MD5 is needed here, the supplied hash algorithm OID
(pHashPara.HashAlgorithm) is "1.2.840.113549.2.5"
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14571
Summary: ole32.CoGetCallerTID needed for VS.NET 2005
Product: Wine
Version: CVS/GIT
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ole32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
keep the VS.NET 2005 IDE for ~10 secs open and it will crash due to this bug.
--- snip ---
0026:Call user32.InSendMessage() ret=500891c3
0026:Ret user32.InSendMessage() retval=00000000 ret=500891c3
0026:Call KERNEL32.RaiseException(80000100,00000001,00000002,0032f618)
ret=608a4d85
0026:trace:seh:raise_exception code=80000100 flags=1 addr=0x7b8432e0
0026:trace:seh:raise_exception info[0]=608a4e20
0026:trace:seh:raise_exception info[1]=608a4e2a
wine: Call from 0x7b8432e0 to unimplemented function ole32.dll.CoGetCallerTID,
aborting
0026:trace:seh:call_stack_handlers calling handler at 0x506a8ab0 code=80000100
flags=1
--- snip ---
MSDN info here: http://msdn.microsoft.com/en-us/library/ms680683(VS.85).aspx
Implementation is straight forward (minus remote), all the info is there.
I've already verified with a patch.
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18500
Summary: ntdll.NtQueryInformationProcess: provide simple
ProcessDebugObjectHandle info class handling,
returning "no debugger"
Product: Wine
Version: 1.1.21
Platform: Other
URL: http://www.exeinfo.go.pl/
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
this is a continuation of http://bugs.winehq.org/show_bug.cgi?id=12859#c7
The app queries for unimplemented "ProcessDebugObjectHandle" information class.
--- snip ---
...
0021:Call ntdll.NtSetInformationThread(fffffffe,00000011,00000000,00000000)
ret=004da0d5
0021:fixme:thread:NtSetInformationThread info class 17 not supported yet
0021:Ret ntdll.NtSetInformationThread() retval=c0000002 ret=004da0d5
0021:Call
0021:Call
ntdll.NtQueryInformationProcess(ffffffff,0000001e,c0000002,00000004,00000000)
ret=004da0e4
0021:fixme:ntdll:NtQueryInformationProcess (process=0xffffffff) Unimplemented
information class: ProcessDebugObjectHandle
0021:Ret ntdll.NtQueryInformationProcess() retval=c0000003 ret=004da0e4
...
--- snip ---
Wine already fakes info for such kind of classes, returning "no debugger".
Have a look at dlls/ntdll/process.c:NtQueryInformationProcess, ProcessDebugPort
how it's done and provide simple patch.
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.