http://bugs.winehq.org/show_bug.cgi?id=14823
Summary: TSM Casin doesnt start after adding a contact
Product: Wine
Version: 1.1.0
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jacobidiego(a)gmail.com
TSM Casin is a software used mostly in Argentina to send SMS to cellphones
using the services provided by some webpages or sending e-mails.
The software as a development value is a crap, the developer have programmed it
with Visual Basic, have used ActiveX to attach IE to a tiny square so it can
display the Validation image, instead of just comunicating via http, have a
banner in the middle and a lot of cuestionable choices. But it is very usefull
and there isnt any linux similar tool.
It implements a custom Contact list, which is the one that is causing troubles,
everything else works fine, it can send SMS's correctly and IE-ActiveX doesnt
makes any issue.
When adding a contact and after filling all the information required (Name,
Cellphone Company, and Cellphone Number), and clicking start, the window should
close and the name should list on the contact list, but it doesnt close, then
clicking again on OK gives a warnning saying that the contact already exist,
and endeed it was added, so to close the wine i have to press Cancel.
Then i can use the contact list normally with any issue, but after closing TSM
and launching it again, it stays on an unuseful load-screen.
Then to get back TSM it is necessary to remove the created contacts, This is
done by deleting the registry key:
HKEY_USERS\S-1-5-4\Software\VB and VBA Program Settings\TSM\Agenda1.0
But copying the cellphones all the time is not a very good aproach.
The download is:
http://www.tsmcasin.com/ir/?id=16
and is freeware with only unharmful banners on it.
There is just 1 post on its forums asking for a linux version:
http://foro.tsmcasin.com/tsmforo/viewtopic.php?f=15&t=716&p=2374&hilit=gpl#…
The developer stays says that windows is standard and linux dont and that wont
be a version for linux.
I know that the best solution would be to develop a real and good open source
application to handle this stuff for all people under the world, but this wont
happen any time soon, and in the mean time, the this problem can be firing a
simple error easy to fix on wine.
Cheers.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21061
Summary: Superantispyware crashes when preferences button
clicked.
Product: Wine
Version: 1.1.34
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bugzilla(a)technicalbloke.com
Created an attachment (id=25258)
--> (http://bugs.winehq.org/attachment.cgi?id=25258)
The error messages that appear in the shell
This software stops working and triggers it's own error reporting mechanism
whenever I click the 'preferences' button in it's main dialog.
Software is available to download here...
http://www.superantispyware.com/onlinescan.html
I have also uploaded a copy to my server to aid with debugging if that one
isn't available or changes or whatever...
http://www.technicalbloke.com/sas_ols.exe
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21062
Summary: Superantispyware crashes at end of custom scan folder
selection process.
Product: Wine
Version: 1.1.34
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bugzilla(a)technicalbloke.com
Created an attachment (id=25259)
--> (http://bugs.winehq.org/attachment.cgi?id=25259)
Contents of my console window during this process.
App crashes at the end of this sequence of events...
Perform Custom Scan Selected
Memory, Registry, Startup Locations, Cookies all Deselected
Select Folders Clicked
Add Clicked
Folder Selected from Dialog
OK Clicked
Close Clicked
This causes the apps internal error reporting mechanism to trigger, the app
doesn't close until this dialog is dismissed so controls on the underlying
window are still clickable however, clicking next demonstrates that the
settings entered above have not taken.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14221
Summary: After Wineboot startup
Product: Wine
Version: 1.0.0
Platform: Other
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: deepblu(a)poczta.fm
Created an attachment (id=14508)
--> (http://bugs.winehq.org/attachment.cgi?id=14508)
wine_dump
After Wineboot start i have message like in attachment;
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14827
Summary: Autocad 2005 : Multiline text edit crashes application
Product: Wine
Version: CVS/GIT
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: max(a)veneto.com
If you try to edit a multiline text (MTEXT) or a dimension text on autocad
(tested on 2005), following happens :
1) The editor is (correctly) shown, but edited text is not visible on text area
2) If you use ESC to abort command, you retourns on autocad correctly
3) If you press OK button to accept changes, the whole autocad hangs.
Ciao
Max
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14422
Summary: AutoCAD 2005 fails to start
Product: Wine
Version: 1.1.0
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: r.snajdr(a)coramexport.cz
AutoCAD 2005 now installs but it wont start. It reports some problems about
gdiplus. I tryed to istall another one from ddl.com but it did not help
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13838
Summary: AutoCAD 2005 setup : Missing backslash in registry entry
and profile path
Product: Wine
Version: 1.0-rc4
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: max(a)veneto.com
During setup of AutoCAD2005, some values in registry are incorrectly set.
In detail, what should be :
C:\\windows\\profiles\\massimo\\Applicazioni\\Autodesk\\AutoCAD 2005\\......
Is instead written like that :
C:\\windows\\profiles\\massimo\\ApplicazioniAutodesk\\AutoCAD 2005\\
Note the missing '\\' between 'Applicazioni' and 'Autodesk'
Folders in profile are created accordingly, so instead of :
massimo
Applicazioni
Autodesk
It's created as :
massimo
ApplicazioniAutodesk
That brings problems in some addons (like ExpressTools for autocad) and, I
guess,
it's the cause for the first-run error messagebox.
I think some path-related functions in wine is missing the terminating \\.
Ciao
Max
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10635
Summary: Tivo Desktop 2.5.1 will not install
Product: Wine
Version: 0.9.50.
Platform: PC
URL: http://www.tivo.com/mytivo/domore/tivotogo/windows.html
OS/Version: Windows XP
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: joseph_scott123(a)msn.com
When trying to install Tivo Desktop 2.5.1 I get the following messages and it
fails to install.
fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),0,3,(nil),0,(nil)) - stub!
err:ole:CoGetClassObject class {6c736db1-bd94-11d0-8a23-00aa00b58e10} not
registered
err:ole:CoGetClassObject no class object {6c736db1-bd94-11d0-8a23-00aa00b58e10}
could be created for context 0x1
fixme:msi:AutomationObject_GetIDsOfNames Unknown member L"UILevel", clsid
{000c1090-0000-0000-c000-000000000046}
fixme:seh:_abnormal_termination (void)stub
fixme:seh:_abnormal_termination (void)stub
fixme:seh:_abnormal_termination (void)stub
Usage:
Install a product:
msiexec {package|productcode} [property]
msiexec /i {package|productcode} [property]
msiexec /a package [property]
Repair an installation:
msiexec /f[p|o|e|d|c|a|u|m|s|v] {package|productcode}
Uninstall a product:
msiexec /x {package|productcode} [property]
Advertise a product:
msiexec /j[u|m] package [/t transform] [/g languageid]
msiexec {u|m} package [/t transform] [/g languageid]
Apply a patch:
msiexec /p patchpackage [property]
msiexec /p patchpackage /a package [property]
Modifiers for above operations:
msiexec /l[*][i|w|e|a|r|u|c|m|o|p|v|][+|!] logfile
msiexec /q{|n|b|r|f|n+|b+|b-}
Register a module:
msiexec /y module
Unregister a module:
msiexec /z module
Display usage and copyright:
msiexec {/h|/?}
NOTE: Product code on commandline unimplemented as of yet
Copyright 2004 Vincent B�ron
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17277
Summary: Remote virtual memory allocation error
Product: Wine
Version: 1.1.13
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: loader
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gabmoa(a)yahoo.it
ZFlash is a win32 application used to simulate and edit part programs
for a cnc. The simulator part is achieved running a reduced version
of numerical control into a fixed memory map from 1 to 8 MB (the current
version is from 1-16 MB but it's the same principle). The numerical control
need to be mapped in this way because it uses fixed addresses.
The application runs in NT 4 SP6, 2000, XP and Vista MS OS but in wine
it doesn't work.
I have seen there is a problem in the memory mapping when I try to run the
application into wine so I've created a reduced example with the only
"incriminated" part. In the attached zip file there are 3 projects:
ZLoader, Z32Sim and Test.
The steps involved are the same of the complete win32 application.
ZLoader.exe create the process 'Test', suspended, and try to reserve memory
of 'Test' from 1 to 8 MB, then it resumes the process.
Test.exe is compiled with the linker flags
/base:"0x800000" /stack:0x800000,0x1000
so the big stack can not be inserted into the first 8MB and the
base of exe is changed from the default 4MB assigned by Visual Studio.
Z32Sim.dll is loaded into 'Test' and it have to map the memory (1-8MB).
To test it in the Debug directory we can execute ZLoader Test.exe
In wine Test fail when ZLoader try to resume it (I've seen that with winedbg)
with the following error:
err:seh:raise_exception Unhandled exception code c0000005 flags 0 addr
0x7ef9e617
Unfortunately it seems a not so easy task because with winedbg I can't
attach to Test process when it's suspended.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=20439
Summary: TroopMaster hangs on startup
Product: Wine
Version: 1.1.31
Platform: PC-x86-64
URL: http://www.troopmaster.com
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: al_turner(a)comcast.net
TroopMaster installs, but hangs on startup. Main window will not activate
(animation works, but no response to keyboard or mouse). Does not even get to
the DotNet download hangup as mentioned in bug 8997. More like 18801 but I
don't even get the popup window showing the attempt to connect to FTP.
As far as I can tell, the FTP attempt only happens if you activate the DOTNET
function (after installing the software). I have not been able to get to the
point of activating the DOTNET since I can't get it that far yet.
I followed the HOWTO from the AppDB that describes the install/kill/restart
process.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24631
Summary: listview NM_HOVER tests sometimes fail
Product: Wine
Version: 1.3.4
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: comctl32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austin.lund(a)gmail.com
The NM_HOVER tests sometimes give:
listview.c:468: listview: 0063016A, 02a1, 00000000, 00000000
listview.c:4433: Test failed: NM_HOVER allow test: the msg sequence is not
complete: expected 0087 - actual 0000
listview.c:468: listview: 0063016A, 02a1, 00000000, 00000000
listview.c:4438: Test failed: NM_HOVER block test: the msg sequence is not
complete: expected 0087 - actual 0000
For example:
http://test.winehq.org/data/79ed8429319509db1ca7723661af5fb4a8017320/win7_w…
Whereas a non-failing situation gives:
listview.c:468: listview: 000000000063016A, 02a1, 00000000, 00000000
listview.c:327: parent: 0000000000230172, 0087, 00000000, 00000000
listview.c:327: parent: 0000000000230172, 004e, 00000000, 0022f4e0
listview.c:4433: expected 0087 - actual 0087
listview.c:4433: expected 004e - actual 004e
listview.c:468: listview: 000000000063016A, 02a1, 00000000, 00000000
listview.c:327: parent: 0000000000230172, 0087, 00000000, 00000000
listview.c:327: parent: 0000000000230172, 004e, 00000000, 0022f4e0
listview.c:4438: expected 0087 - actual 0087
listview.c:4438: expected 004e - actual 004e
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18954
Summary: Source Insight: Text in Editor Window overlaps with
other text.
Product: Wine
Version: 1.1.21
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: turanammo(a)rocketmail.com
Created an attachment (id=21809)
--> (http://bugs.winehq.org/attachment.cgi?id=21809)
Text overlap in editor window
Text seems to overlap with other text, usually the overlapped text is shown
twice. Happens when the cursor is moved upwards or downwards using the keypad
arrow keys up/down respectively.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17807
Summary: Electronics Workbench 5.12: measurement units aren't
shown
Product: Wine
Version: 1.1.17
Platform: PC
URL: http://appdb.winehq.org/objectManager.php?sClass=version
&iId=402
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: nick(a)vyalceva.net
Created an attachment (id=20039)
--> (http://bugs.winehq.org/attachment.cgi?id=20039)
the oscilloscope window
When trying to set measurement unit for a parameter in the "Component
Properties" window, or in the oscilloscope, measurement units are not shown in
the selection box.
But I can view it by copying from the box and pasting in a text editor, e.g.
"0.50 s/div ".
Old wine version 0.9.52 shows units in the oscilloscope window, but doesn't do
it in the component properties
(http://appdb.winehq.org/screenshots.php?iAppId=267&iVersionId=402).
Also I get the following error message on exit: "access violation on
(FFF4EFFF), reading C4".
Running from terminal shows me the only line
"fixme:font:WineEngRemoveFontResourceEx :stub".
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16183
Summary: Popup text is immediately overwritten by background in
IDA Pro
Product: Wine
Version: 1.1.9
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: markk(a)clara.co.uk
IDA Pro is an interactive disassembler. A freeware version can be downloaded
from http://www.hex-rays.com/idapro/idadownfreeware.htm
When viewing a disassembly, if you hover the mouse pointer over a reference to
another location, a view of the instructions at that location pops up next to
the mouse pointer. You can increase and decrease its height by moving the mouse
wheel.
In Wine this does not work properly. The pop-up display is blank (just the
background colour). Moving the mouse wheel, you can see the text that should be
there, but it is immediately overwritten by the background colour.
To reproduce: download and install IDA Pro freeware version. Run the program
and open a Windows executable. Move the pointer over a reference to another
location in the program and wait for the pop-up display. Notice it is blank.
Move the mouse wheel and (hopefully) see the text being rendered but
immediately overwritten.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15462
Summary: Wine blocking on exit when stdout and stderr are piped
Product: Wine
Version: 1.0.0
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: chris(a)neko.net.nz
Created an attachment (id=16357)
--> (http://bugs.winehq.org/attachment.cgi?id=16357)
Output of two simultaneous runs of described script
The issue occurs when concurrently running shell scripts which call Wine
processes whose standard out and standard error are both piped to another
program.
When two instances of a script such as the following are run concurrently, the
first child wine processes started by each of then run together, but in one of
the scripts that child doesn't fully exit until the _other_ script has
completely run and exited. (The Wine process terminates, but the pipeline
doesn't complete and so the script doesn't continue.)
A bash test-case to show this behaviour is as follows:
for iter in first second ; do echo "[$$] running $iter child wine" `date`; wine
sleep-long.exe 2>&1 | tee /dev/null; done; echo "[$$] done " `date`
The problem doesn't occur if either the redirection or pipe is removed, if I
run the scripts in separate Wine environments using $WINEPREFIX, or if I have
another long-lived Wine process which stays running throughout the entire
operation.
An example run with timing is attached.
The test Wine program used above, 'sleep-long', is the following tiny C program
(tested with Microsoft cl and Cygwin GCC with mingw):
#include <stdio.h>
#include <windows.h>
int main(){
printf("Started fake compiler, sleeping 8000ms\n");
Sleep(8000);
printf("Exiting fake compiler\n");
exit(0);
}
I've been able to reproduce this problem on several systems and Wine versions
(Debian Lenny with distro-packaged Wine 1.0.0-1, Debian Etch with Wine
1.0-rc1-1~bpo40+1 from Debian backports, Ubuntu Dapper with distro-packaged
Wine 0.9.9-0ubuntu2) but not on one other (Debian Etch with distro-packaged
Wine 0.9.25-2.1)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15906
Summary: EnumFonts returns each font multiple times
Product: Wine
Version: 1.1.5
Platform: PC-x86-64
URL: http://msdn.microsoft.com/en-
us/library/ms533964(VS.85).aspx
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdi32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: goeran(a)uddeborg.se
Created an attachment (id=17078)
--> (http://bugs.winehq.org/attachment.cgi?id=17078)
Test program executing EnumFonts()
According to the documentation (see URL) the EnumFonts function returns one
(random) font of each available typeface. The Wine implementation returns each
typeface many times.
As a test case I installed the typeface "Signet Roundhand" and ran the attached
test program. Under indows it returns "Signet Roundhand" once. Under wine it
returns it three times, with different values for lfCharSet and tmCharSet.
I also copied the Arial font files from Windows (arial.ttf, ariali.ttf,
arialbd.ttf, and arialbi.ttf) to my $HOME/.fonts directory. Under Windows,
Arial is returned once with the test program. Under Wine it is returned ten(!)
times.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14350
Summary: SetClassLongW() to subclass window EDIT control Problem
Product: Wine
Version: 1.0.0
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: user32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hongbo(a)njstar.com
CC: hongbo(a)njstar.com
Created an attachment (id=14649)
--> (http://bugs.winehq.org/attachment.cgi?id=14649)
MSVC6 MFC test project with exe in debug dir
Summary:
SetClassLongW(hEditWnd, GCL_WNDPROC, (DWORD)EditWndProc) behave different on
WINE 1.0 from Windows. Any EDIT window created after will be ANSI window on
Windows, but Unicode Windows on Wine.
How To Repeat:
In the attached VC6 MFC ANSI App project, SetClassLongW is called in
-------------------------------------------------------------------
static WNDPROC lpfnOldEditWndProc=NULL;
LONG FAR PASCAL EditWndProc(HWND hWnd, WORD Message, WORD wParam, LONG lParam)
{
return CallWindowProcW((WNDPROC)lpfnOldEditWndProc, hWnd, Message,
wParam,lParam);
}
int CDialogTestView::OnCreate(LPCREATESTRUCT lpCreateStruct)
{
if (CView::OnCreate(lpCreateStruct) == -1)
return -1;
HWND hEditWnd1 = CreateWindowEx(0,"EDIT", "E1",WS_POPUP,0, 0, 1,
1,NULL,NULL,NULL,NULL);
lpfnOldEditWndProc =(WNDPROC)SetClassLongW(hEditWnd1, GCL_WNDPROC,
(DWORD)EditWndProc);
// TODO: Add your specialized creation code here
return 0;
}
-------------------------------------------------------------------
There is a EDIT control on the About dialogbox, when click 'OK' on window
the program report the Edit Box is NOT unicode Window. But Under Wine 1.0,
It says 'the Edit Box IS unicode Window'.
To Test: run the EXE in debug folder, Help - About DialogTest - click 'OK'.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12891
Summary: ntdll: exception.ok test fails in PC-BSD but not Linux
Product: Wine
Version: 0.9.60
Platform: PC
OS/Version: FreeBSD
Status: NEW
Keywords: testcase
Severity: minor
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=12597)
--> (http://bugs.winehq.org/attachment.cgi?id=12597)
+relay,+seh,+ntdll in git
exception.c:602: Test failed: expected 4 exceptions, got 0
fixme:seh:fpe_handler untested SIMD exception: 0. Might not work correctly
*** Error code 1
+relay,+seh,+ntdll log attached
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15956
Summary: "make test" doesn't always leave screen in same video
mode as it started in
Product: Wine
Version: 1.1.7
Platform: Other
OS/Version: other
Status: NEW
Severity: normal
Priority: P2
Component: testcases
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
Some tests don't properly reset the video mode, even if they don't crash.
I'm gathering a list of culprits and will post it here.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=20925
Summary: d3d[89]/tests/visual crash under valgrind
Product: Wine
Version: 1.1.34
Platform: PC
OS/Version: Linux
Status: NEW
Keywords: download, source, testcase
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
http://kegel.com/wine/valgrind/logs/2009-12-05-01.15/vg-d3d8_visual.txt
and
http://kegel.com/wine/valgrind/logs/2009-12-05-01.15/vg-d3d9_visual.txt
both show the crash
Unhandled exception: page fault on read access to 0x58469450 in 32-bit code
(0x0d9bc92b).
Backtrace:
=>0 0x0d9bc92b (0x11ad7000)
1 0x0fa16d50 in libgl.so.1 (+0x3dd50) (0x0ffbc038)
which might be a problem in the driver, but could also be a disagreement
between valgrind and the driver.
I'm going to stop running d3d[89]/tests/visual under valgrind for now,
since they always crash. Perhaps the good folks at Nvidia could
have a look at how to get valgrind and their drivers to play nice together.
(One of those logs also seems to have found a real use-after-free bug
in their driver:
Invalid read of size 4
at ??? (in /usr/lib32/libGLcore.so.180.44)
Address 0xe6905f4 is 156 bytes inside a block of size 632 free'd
at free (vg_replace_malloc.c:325)
by ??? (in /usr/lib32/libGLcore.so.180.44)
so perhaps they would actually get something out of this.)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21180
Summary: user32_crosstest.exe sysparams doesn't properly
restore tray icons on Win
Product: Wine
Version: 1.1.35
Platform: x86
OS/Version: Linux
Status: NEW
Keywords: download, source, testcase
Severity: minor
Priority: P2
Component: testcases
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bunglehead(a)gmail.com
After running sysparams test some tray icons are left a kind of downsampled -
e.g. net status icon is 4x4 sized.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11833
Summary: GroupMail: Unhandled page fault on read access to
0x00000000 at address 0x164675c
Product: Wine
Version: 0.9.56.
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: info(a)netherworld.com.ar
When i open File => create new mail.
the app crashes and the debug shows an Unhandled page fault.
please fix
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26189
Summary: Wine32bi (kernel32)t: Crysis Wars Dedicated Server no
longer shows console on start under X
Product: Wine
Version: 1.3.14
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: kernel32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: armin.kazmi(a)tu-dortmund.de
If you want to launch a crysis wars dedicated server, e.g. via
wine CrysisWars/Bin32/CrysisWarsDedicatedServer.exe -mod MWLL -root C:/Program
Files/CrysisWars/server +exec server.cfg
you expect it to spawn a console window (using windows console host it seems)
to
show further output and provide a control interface. Via git bisect I tracked
down
the offending patch, which was added quite a long time ago.
e4d090277b3f4f76b39e55480e5d1387798dbabe is the first bad commit
commit e4d090277b3f4f76b39e55480e5d1387798dbabe
Author: Eric Pouech <eric.pouech(a)orange.fr>
Date: Mon Aug 30 22:19:24 2010 +0200
kernel32: Properly handle bare console on input.
:040000 040000 79337f5cf3c9c78a557b10f8b1147476815470ac
860f197e56f714bea54dacbafe881c0ede7b19e9 M dlls
Automatic revert of the patch from HEAD fails.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22327
Summary: download
Product: Wine
Version: 1.1.42
Platform: x86
URL: http://sourceforge.net/projects/phpgedview/files/1%20P
hpGedView/PhpGedView%20v4.2.3/PGV-Demo-4.2.3.zip/downl
oad
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: leighmanthegreat(a)hotmail.com
Cannot install PGV demo for Windows using a clean wineprefix.
After installing dotnet20sp2 Mono2.4 with winetricks I get the following
output:
err:module:import_dll Library php5ts.dll (which is needed by
L"Z:\\home\\jack\\PGV test\\democd\\httpd\\php\\php5apache2_2.dll") not found
(OS 10048)Address already in use: make_sock: could not bind to address
127.0.0.1:6880
no listening sockets available, shutting down
Unable to open logs
System.OverflowException: Number overflow.
at System.Drawing.SizeF.ToSize () [0x00000]
at System.Windows.Forms.MessageBox+MessageBoxForm.InitFormsSize () [0x00000]
at System.Windows.Forms.MessageBox+MessageBoxForm.RunDialog () [0x00000]
at (wrapper remoting-invoke-with-check)
System.Windows.Forms.MessageBox/MessageBoxForm:RunDialog ()
at System.Windows.Forms.MessageBox.Show (System.String text) [0x00000]
at PGVDemo.Form1.button1_Click (System.Object sender, System.EventArgs e)
[0x00000]
at System.Windows.Forms.Control.OnClick (System.EventArgs e) [0x00000]
at System.Windows.Forms.Button.OnClick (System.EventArgs e) [0x00000]
at System.Windows.Forms.ButtonBase.OnMouseUp
(System.Windows.Forms.MouseEventArgs mevent) [0x00000]
at System.Windows.Forms.Button.OnMouseUp (System.Windows.Forms.MouseEventArgs
mevent) [0x00000]
at System.Windows.Forms.Control.WmLButtonUp (System.Windows.Forms.Message& m)
[0x00000]
at System.Windows.Forms.Control.WndProc (System.Windows.Forms.Message& m)
[0x00000]
at System.Windows.Forms.ButtonBase.WndProc (System.Windows.Forms.Message& m)
[0x00000]
at System.Windows.Forms.Button.WndProc (System.Windows.Forms.Message& m)
[0x00000]
at System.Windows.Forms.Control+ControlWindowTarget.OnMessage
(System.Windows.Forms.Message& m) [0x00000]
at System.Windows.Forms.Control+ControlNativeWindow.WndProc
(System.Windows.Forms.Message& m) [0x00000]
at System.Windows.Forms.NativeWindow.WndProc (IntPtr hWnd, Msg msg, IntPtr
wParam, IntPtr lParam) [0x00000]
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.