http://bugs.winehq.org/show_bug.cgi?id=25786
Summary: MYST V Demo: Installer GUI doesn't appear correctly
Product: Wine
Version: 1.3.11
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gaming4jc2(a)yahoo.com
Created an attachment (id=32861)
--> (http://bugs.winehq.org/attachment.cgi?id=32861)
Terminal output: wine "Myst V Demo.exe" + WINEDEBUG=+imm wine "Myst V Demo.exe"
Splitting from bug 11963 to isolate problems. This bug causes the window to not
render correctly and makes it impossible to click through the installation. It
can still be done perfectly from hotkeys - see also
http://bugs.winehq.org/show_bug.cgi?id=11963#c15
The offending Component is "imm".
(fixme:imm:ImeHandleNotify WM_IME_NOTIFY:IMN_SETCOMPOSITIONWINDOW)
Attached is the log showing the error + a debug of imm.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25988
Summary: Mr. Smoozles Goes Nutso: problems playing sound
Product: Wine
Version: 1.3.12
Platform: x86
URL: http://www.juniper-games.com/smoozles/Nutsosetup.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gyebro69(a)gmail.com
Created an attachment (id=33126)
--> (http://bugs.winehq.org/attachment.cgi?id=33126)
terminal output (only built-in dlls)
The game is a nice, freeware adventure puzzle game.
Neither sound nor music is playing in the game with a clean Wine install.
After installing the directmusic components via winetricks and starting
Timidity as a separate process music is playing fine in the menu and in some of
the scenes.
However there are still problems playing sound effects during gameplay: it is
most noticeable in the first scene where a simple sound effect is intended to
play (sounds like a shooting sound).
The game becomes almost unplayable because of a strange lagging issue: the game
barely responds to keyboard events while the sound is playing.
Once you manage to make it past the first scene, gameplay seems to be back to
normal in the second scene. It seems that the lagging issue has something to do
with the looping sound effect during the first scene.
The first log is showing the output without native directmusic dlls.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23508
Summary: Final Fantasy XIV Benchmark very slow
Product: Wine
Version: 1.2-rc6
Platform: x86
URL: http://uk.download.nvidia.com/nzone/international/benc
hmarks/ffxiv/FFXIVBenchmark.zip
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
The Final Fantasy XIV benchmark runs, but is very slow (~4 fps, plus lots of
pauses).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14592
Summary: Soldat Performance Spikes
Product: Wine
Version: 1.1.1
Platform: Other
URL: http://static.soldat.pl/downloads/soldatsetup15b.zip
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: tehstealth(a)yahoo.com
I have been trying the Soldat 1.5.0 Beta out, and it works as well as the 1.4
version. However there is a bug (probably in 1.4 too, but I'm reporting it for
1.5b anyway) with the weapons selection menu and sprites. Especially with the
menu, Soldat lags horribly, and once you do select your weapon, everything is
fine again. Also, when sprites are drawn on the screen, it also seems to spike
a bit. Both instances are spitting out this, continuously:
fixme:d3d_surface:read_from_framebuffer_texture >>>>>>>>>>>>>>>>>
GL_INVALID_ENUM (0x500) from glReadBuffer @ surface.c / 913
Whatever that is, if that were fixed, it would probably be one of the last bugs
dealing with Soldat gameplay performance, as everything else is great!
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24966
Summary: No sound and mouse problems on Unreal Tournament 2004
Demo
Product: Wine
Version: 1.3.6
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: paloseco(a)gmail.com
Apart from graphic issues, I cannot move mouse to the bottom when in menu, and
I have no sound at all.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23531
Summary: RmcpLoader does not start
Product: Wine
Version: 1.2-rc6
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: i386dx(a)hotmail.com
Created an attachment (id=29379)
--> (http://bugs.winehq.org/attachment.cgi?id=29379)
Backtrace after loading
This is about a small tool called 'RmcpLoader'. This is used to monitor and
control Newtec devices.
The tool can be downloaded (freeware) at
http://www.newtec.eu/fileadmin/user_upload/product_leaflets/Rmcploader_v4.9…
*Installation works
*first attempt gives an error (System error &H8007007E). Nothing to worry about
since this is the same behaviour as in Windows (MS Office needs to be installed
- can be removed afterwards)
After installation of MSOffice 2000/XP/2003 (at this point the program works in
Windows) the tool crashes completely.
Backtrace attached
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16096
Summary: DirectMusic doesn't work
Product: Wine
Version: 1.1.8
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: info(a)cms-db.de
Created an attachment (id=17324)
--> (http://bugs.winehq.org/attachment.cgi?id=17324)
DirectMusic Error
In Anno 1503 (1503 A.D.) the background music doesn't work.
There are lots of errors about DirectMusic in the console output.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23373
Summary: Dubloon does not play music or sound
Product: Wine
Version: 1.2-rc4
Platform: x86
URL: http://gamejolt.com/freeware/games/dubloon/files/254/
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: directx-dmusic
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: madewokherd(a)gmail.com
Created an attachment (id=29133)
--> (http://bugs.winehq.org/attachment.cgi?id=29133)
terminal output
Dubloon should start with background audio and should play sounds when a menu
is selected. However, it does not play any audio.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25753
Summary: Hacker Evolution: Untold has no sound?
Product: Wine
Version: 1.3.11
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-dmusic
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: roland(a)mxchange.org
Created an attachment (id=32814)
--> (http://bugs.winehq.org/attachment.cgi?id=32814)
wine ./steam.exe 2>debug.log
The mentioned game (both demo and retail from Steam platform) has no sound but
music (MP3 music) is playing. Other games I play on a regular basis have
working sound. I think is is related to this line:
--------------
fixme:dswave:IDirectMusicWaveImpl_IPersistStream_Load (0x2ee3418, 0x17a518):
loading not implemented yet (only descriptor is lo
aded)
--------------
Regards,
Roland
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24559
Summary: Final Fantasy 7: error when installing 'Movie Player'
Product: Wine
Version: 1.3.3
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: leighmanthegreat(a)hotmail.com
Created an attachment (id=31005)
--> (http://bugs.winehq.org/attachment.cgi?id=31005)
Clicking 'Install MoviePlayer' option
Using Ubuntu 10.04
Final Fantasy 7 setup program gives you the option to 'Install Movie Player'
clicking this appears to fail with the error message
DirectShow Setup failed with error code: -2147023829
terminal log attached
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16149
Summary: Star Wars Rebellion: tactical battle mode crashes game
Product: Wine
Version: 1.1.8
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: appleshampooid(a)netscape.net
Created an attachment (id=17394)
--> (http://bugs.winehq.org/attachment.cgi?id=17394)
console output
Star Wars: Rebellion will crash when you try to enter tactical battle mode
(when two fleets meet over a planet). The fastest way to reproduce the bug is
to start a new game as the Rebellion and move your closest fleet to Coruscant,
then bump the game speed up to Fast and you'll get a battle alert within a
minute. Once you take control of the battle, you can issue orders while still
paused, although the starfield is blank and doesn't show any of the ships. As
soon as you unpause the battle or click in the starfield, the game will crash.
NOTE: I'm using the native DLLs for d3drm.dll and d3dxof.dll. The problem with
d3drm.dll is described in bug 8232, but it doesn't look like it's getting fixed
any time soon. From the console output, I'm pretty sure this bug would still
cause the game to crash even if the wine DLLs for those libraries worked (the
errors seem to be coming from other wine DLLs, not the native ones). Other
than those DLLs, I'm running it with a fresh .wine directory on 1.1.8.
Console output is attached, please let me know if you'd like me to enable any
other debug flags. Note that the error which is listed the first few times in
the file is pumped out constantly for the duration of the game, so I'm not sure
if its relevant. I've snipped off the top of the logfile until right before
you enter battle mode and it crashes.
Unfortunately I don't believe the game is available for free download. I'm
running Ubuntu 8.04. Thanks for taking a look.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12840
Summary: kernel32: change.ok test fails in PC-BSD but not Linux
Product: Wine
Version: 0.9.60
Platform: PC
OS/Version: FreeBSD
Status: NEW
Keywords: testcase
Severity: minor
Priority: P2
Component: kernel32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=12531)
--> (http://bugs.winehq.org/attachment.cgi?id=12531)
+file in git, bzip2 -9'ed
Change.ok is full of failures in PC-BSD:
change.c:82: Test failed: Missed notification
change.c:296: Test failed: should be ready
change.c:759: Test failed: ov.InternalHigh wrong
change.c:763: Test failed: action wrong
change.c:764: Test failed: len wrong
change.c:765: Test failed: name wrong
change.c:820: Test failed: Missed parent notification
Total of 53!
Attached is a +file log.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12501
Summary: ms sql express 2005 fails to install
Product: Wine
Version: unspecified
Platform: PC
URL: http://go.microsoft.com/fwlink/?linkid=65212
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: azrael(a)viii-lo.krakow.pl
ms sql express 2005 fails to install.
$ wine SQLEXPR32.EXE
fixme:clusapi:GetNodeClusterState ((null),0x33ec9c,0) stub!
And then I'm getting a popup "Unable to find a volume for file extraction.
Please verify that you have proper permissions"
So I unpacked it with cabextract and then I got:
:~/sqlexpr$ wine setup.exe
fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),4,3,(nil),0,(nil)) - stub!
err:ole:CoGetClassObject class {ddacb012-db3a-432e-807d-66a0a3c7dffe} not
registered
err:ole:CoGetClassObject no class object {ddacb012-db3a-432e-807d-66a0a3c7dffe}
could be created for context 0x1
and a popup "setup failed"
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12854
Summary: ntdll change.ok test fails in PC-BSD but not Linux
Product: Wine
Version: 0.9.60
Platform: PC
OS/Version: FreeBSD
Status: NEW
Keywords: testcase
Severity: minor
Priority: P2
Component: kernel32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=12551)
--> (http://bugs.winehq.org/attachment.cgi?id=12551)
+file in git, bzip2 -9'ed
Change.ok is full of failures in PC-BSD:
change.c:117: Test failed: event should be ready
change.c:119: Test failed: information wrong
change.c:120: Test failed: information wrong
change.c:124: Test failed: action wrong
change.c:125: Test failed: len wrong
change.c:126: Test failed: name wrong
Total of 26.
Attached is a +file log.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27019
Summary: Print in Gestan
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jsiegwald(a)gmail.com
Hello everybody,
I'm using 'Gestan' (you can download it on www.gestan.fr) which is a fantastic
program used to manage my customers and create bills...
Anyway, I can install it without any problem, but when I want to print a bill,
there is nothing in !
It is a program created with Windev...
Anyone have a solution ?
Thanks a lot for your future help !
Julian
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22785
Summary: 'Candytron' exhibits geometry corruption on certain 3D
objects
Product: Wine
Version: 1.1.44
Platform: x86
URL: http://pouet.net/prod.php?which=9424
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mitch074(a)gmail.com
When running the 'Candytron' final version demo (now in full screen), some 3D
objects are rendered garbled with vertices going all over the place. The
program otherwise works to completion and closes properly.
Test configuration: WineHQ-made Wine 1.1.44 on Mandriva 2010.0, using clean
profile and fglrx from Catalyst 10.4.
When running from console, the only d3d error seems unrelated:
fixme:d3d:swapchain_init Add OpenGL context recreation support to
context_validate_onscreen_formats
Download the 'final' version from this page:
http://pouet.net/prod.php?which=9424
Also provided at that address, a video of the rendered version.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18213
Summary: Video in WebSlingPlayer Firefox is blank/black
Product: Wine
Version: 1.1.19
Platform: PC
URL: http://beta.sling.com/sling_player
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kennybobs(a)o2.co.uk
WebSlingPlayer, a Firefox plugin which acts in the same way as Slingplayer,
connects (with workarounds) but doesn't show any video. Audio plays fine.
"winetricks firefox3 flash wmp9" and native qcap.dll are needed to get this far
as there is no native Linux client as of yet. WebSlingPlayer is currently in
beta.
Workaround is using native quartz.dll.
Severity set low as workaround is use the Slingplayer. WebSlingPlayer is
intended for Windows users who do not have admin access, but this isn't
applicable to Wine.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18443
Summary: Could not initiate GoogleTalkPlugin connection in Google
Video/Voice chat
Product: Wine
Version: 1.1.21
Platform: PC
URL: http://www.gmail.com/
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: winsock
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: thestig(a)google.com
Created an attachment (id=21044)
--> (http://bugs.winehq.org/attachment.cgi?id=21044)
+ws2_32,+winsock log
To reproduce:
1. Install win32 Firefox 3.0.x.
2. Login to Gmail.
3. Attempt to try the video/voice chat, download the plugin. (downloading
http://dl.google.com/googletalk/googletalkplugin/GoogleVoiceAndVideoSetup.e…
directly does not work)
4. Close win32 Firefox.
5a. run winetricks msxml3
5b. install GoogleVoiceAndVideoSetup.exe (It will say error 0x80040509 even
though it installed - bug 18442)
6. Move the content of c:\Program Files\'Mozilla Firefox' into the appropriate
place under c:\Program Files\Mozilla Firefox. (bug 18441)
7. Start win32 Firefox.
8. Login to Gmail.
Once the chat window loads, you should get the following on the console:
trace:winsock:WSACreateEvent
trace:winsock:WSAStartup verReq=1
trace:winsock:WSAStartup succeeded
err:ntdll:NtQueryInformationToken Unhandled Token Information class 25!
[000:002] Could not initiate GoogleTalkPlugin connection
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14713
Summary: Xara Xtreme 4: Resizing handles not visible
Product: Wine
Version: 1.1.2
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: info(a)linopus.de
Xara Xtreme 4: Resizing handles not visible
Xara Xtreme 4, the latest edition of the vector drawing application from Xara
(30 days trial available at http://www.xara.com/us/downloads/xtreme/ ), shows
no resizing handles when selecting an object. The resizing handles should be
visible when clicking an object with the select tool.
By contrast, the turning/shearing handles are visible. The turning/shearing
handels appear when clicking an object twice with the select tool.
Additionally, Bezier handles and points on curves do appear, but in wrong
colors (cyan instead of red). Bezier handles and points appear when using the
edit shape tool.
This is on a wine 1.1.2 install on Ubuntu Linux 8.04 in its standard settings.
The same bug is present when using Xara Xtreme X1, which is the thirdlast
edition. The bug is also present in earlier versions of wine (e.g. 0.9.56) and
CrossOver (e.g. 7.0.1).
Yours sincerely
Tobias Hilbricht
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10471
Summary: Radmin viewer 3.1: Ungrayed disabled menu item in the
"Connection Properties" window
Product: Wine
Version: 0.9.48.
Platform: PC
URL: http://www.famatech.com/download/rview31.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: wine-gui
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bugs.radmin(a)gmail.com
We got an error:
1. Installed Radmin server 3.1 (http://www.famatech.com/download/rserv31.exe)
on a windows computer.
2. Installed Radmin viewer 3.1 on a linux computer with wine installed.
3. Started Radmin viewer and open "Connection Properties" window (can be
reached "Right click on connection icon" --> "Properties" or "Connection" -->
"Connect to").
The list of intermediate hosts in "Advanced settings" should be grayed
(disabled) until checkbox "Connect through host" is marked.
The error was tested on Fedora Core 7 installation with the last wine package
from fedora update site (fedora_mirror/fedora/linux/updates/7/i386/).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12428
Summary: win16 test suite: profile test fails
Product: Wine
Version: CVS/GIT
Platform: PC
URL: http://win16test.googlecode.com
OS/Version: Linux
Status: NEW
Keywords: download, source, testcase
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=11967)
--> (http://bugs.winehq.org/attachment.cgi?id=11967)
Backtrace in git
+++ This bug was initially created as a clone of Bug #9850 +++
The code can be downloaded
from http://win16test.googlecode.com with svn,
and is quite easy to run; see
http://win16test.googlecode.com/svn/trunk/src/README
for instructions.
The profile test crashes in current git. Attached is the backtrace in current
git.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12427
Summary: win16 test suite: printdlg test fails
Product: Wine
Version: CVS/GIT
Platform: PC
URL: http://win16test.googlecode.com
OS/Version: Linux
Status: NEW
Keywords: download, source, testcase
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=11966)
--> (http://bugs.winehq.org/attachment.cgi?id=11966)
Backtrace in git
+++ This bug was initially created as a clone of Bug #9850 +++
The code can be downloaded
from http://win16test.googlecode.com with svn,
and is quite easy to run; see
http://win16test.googlecode.com/svn/trunk/src/README
for instructions.
The printdlg test crashes in current git. Attached is the backtrace in current
git.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25100
Summary: the program don't start...
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: programs
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: salvatore91salvatore(a)yahoo.it
....
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21448
Summary: RollerCoaster Tycoon 3 does not accept the original
disc
Product: Wine
Version: 1.1.36
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: thomas.mertes(a)gmx.at
Created an attachment (id=25828)
--> (http://bugs.winehq.org/attachment.cgi?id=25828)
Error log and content of message box when starting RollerCoaster Tycoon 3
When starting RollerCoaster Tycoon 3 it asks for the original disc although the
original disk is in. There are some errors logged (see attachment) and then a
message box appears:
Please insert the original disc instead of a backup. See
www.securom.com/copy for more details
Greetings Thomas
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21424
Summary: Cygwin 1.7.1 bash crashes
Product: Wine
Version: 1.1.36
Platform: x86
OS/Version: Linux
Status: NEW
Keywords: download, source
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
cygwin installs now, but one sees the following crash
10 [main] bash 9 _cygtls::handle_exceptions: Exception:
STATUS_ACCESS_VIOLATION
1271 [main] bash 9 open_stackdumpfile: Dumping stack trace to
bash.exe.stackdump
err:ntdll:RtlpWaitForCriticalSection section 0x736d2784 "loader.c:
loader_section" wait timed out in thread 0036, blocked by 003c, retrying (60
sec)
during postinstall, and also when running bash interactively.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19713
Summary: Some serial port communication functions behave
differently in Wine and Windows.
Product: Wine
Version: 1.1.27
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: kernel32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fenixk19(a)mail.ru
Created an attachment (id=23025)
--> (http://bugs.winehq.org/attachment.cgi?id=23025)
Test program
This makes test program to hang in Wine, but in MS it is ok. Test program
attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13296
Summary: regression problem in upgrade to Ubuntu Hardy/1.0-rc1:
Palm Hotsync over serial Segmentation Fault
Product: Wine
Version: 1.0-rc1
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jan-winehq(a)h-i-s.nl
Created an attachment (id=13150)
--> (http://bugs.winehq.org/attachment.cgi?id=13150)
Logging output
I upgraded to Ubuntu Hardy, and wine 1.0-rc1.
Hotsync manager 1.0 for Palm Pilot worked fine before.
http://appdb.winehq.org/objectManager.php?sClass=version&iId=10362
Now it crashes half-way synchronising over the serial port, sometimes after a
few seconds, sometimes much later in the process.
These crashes reproduce well, and yield a segmentation fault without further
information
$ wine hotsync.exe
Segmentation fault
$
I do not know if this means that a part of Wine crashes, or just the
application.
I added logging, where it seems that the problem lies within the call below:
0009:CallTo16(func=111f:072a,ds=1087,118f,7404,0000,0006) ss:sp=1087:ffd0
I am not sure if the problem lies with wine, or that other problems with Ubuntu
Hardy may relate to this.
It is disappointing that an application that used to work fine, and I came to
depend on, is now broken.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25083
Summary: HyperTerminal unable to loop back on COM1 (RS-232)
Product: Wine
Version: 1.3.6
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: graham(a)nerve.org.za
On a machine with an on-board RS-232 port at COM1, HyperTerminal (as shipped
with Windows XP) is firstly unable to detect the port until changes are made in
the WINE registry, thereafter, after attaching a simple loopback adapter (pins
2 and 3 of a DB9F shorted) no characters are echoed to the screen.
Obtaining the software:
>From a Windows XP installation, copy the files hypertrm.exe and htrn_jis.dll
from 'C:\Program Files\Windows NT' and hticons.dll and hypertrm.dll from
C:\Windows\System32' into a suitable directory below .wine/drive_c
or
Download a free 30 day trial of HyperTerminal Private Edition 7.0 from
http://www.hilgraeve.com/hyperterminal/
Create a symbolic link for COM1, documented here:
http://www.winehq.org/docs/wineusr-guide/misc-things-to-configure
ln -s /dev/ttyS0 ~/.wine/dosdevices/com1
At this point, starting HyperTerminal will result in no serial ports being
shown.
Now, create a registry entry in WINE for the serial port, mentioned in this bug
report:
http://bugs.winehq.org/show_bug.cgi?id=4282
Add the following lines to .wine/system.reg [Hardware\\Devicemap\\SerialComm]
"Serial0"="COM1"
Now HyperTerminal can be started, COM1 can be selected and configured, but no
characters are echoed to the screen.
However, the free terminal program, simply named 'Terminal' and available here:
https://sites.google.com/site/terminalbpp/
Does echo characters to the screen.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23326
Summary: Cannot change printer settings, Family Tree 7
Product: Wine
Version: 1.2-rc4
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jamesl(a)bestweb.net
Created an attachment (id=29072)
--> (http://bugs.winehq.org/attachment.cgi?id=29072)
FTW7 print dialogue, compare Wine to XP
Cannot select printer/change print settings with Family Tree Maker 7. Dialogue
box comes up, drop-down boxes are working, but radio buttons for switching
between "default printer" and an alternate printer are not selectable. Have
compared the print dialogue between Wine vs a native install under Windows XP
(SP3) and notice some text from the Windows install does not show up under
Wine.
Also tried the same thing with the "free" version of FTM2005se available at
http://past.familytreemaker.com/download/starter.aspx and found it's behavior
is the same. So I will describe steps from there, since it would be eaier for
someone to get that to test against.
STEPS TO RECREATE:
1: Set up wine profile with "WINEPREFIX=/home/jelabarre/wine-apps/ftw2005
winecfg"; set winver to "Windows XP", point the Documents directory under
Desktop Integration to my own Documents directory
2: install FTW2005 by running
"WINEPREFIX=/home/jelabaWINEPREFIX=/home/jelabarre/wine-apps/ftw2005 wine
./FamilyTreeMaker2005se.exe", accept all defaults.
3: open FTW 2005 from "Wine" menu entry on Gnome menu. Selected "Buy Later"
from popup window (does not affect outcome, as same print problem occurrs in a
regular retail version of FTM7)
4: create new file, or use existing file (same result either way)
5: select "File | Print Setup", then try to select radio button for either
"Default Printer" or "Specific Printer". Neither can be selected
6: try selecting a "specific printer" from drop-down box. Printer can be
selected, but radio buttons still not functional.
7: after selecting a printer other than the default (such as print-to-PDF) and
then try printing. Output will still go to the Linux default printer, no edits
of the print settings will take effect.
The "Family Archive Viewer v6.0" at
http://familytreemaker.genealogy.com/abtffiv.html and "Family Archive Viewer
v11.0" at http://www.genealogy.com/abtffiv.html are other variants that
exhibits this behavior.
Have attached sample screenshots of Wine vs WinXP versions of the print
dialogue.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9378
Summary: CM: Shock Force 'Could not initialize graphics display'
Product: Wine
Version: 0.9.43.
Platform: PC
URL: http://www.battlefront.com/products/cmsf/downloads.html
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: wine-directx
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mailing_list(a)orange.nl
After starting Combat Mission: Shock Force Demo it stops with the message:
'Could not initialize graphics display. REQUIRED 1024x768, 32-bit
color'.
The terminal output doesn't provide any clues:
wine 'CM Shock Force DEMO.exe'
ALSA lib conf.c:3939:(snd_config_expand) Unknown parameters 0
ALSA lib control.c:910:(snd_ctl_open_noupdate) Invalid CTL default:0
err:alsa:ALSA_CheckSetVolume Could not find 'PCM Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find 'PCM Playback Volume' element
fixme:wave:ALSA_AddCaptureDevice Add support for DSCapture
ALSA lib seq_hw.c:457:(snd_seq_hw_open) open /dev/snd/seq failed: No such file
or directory
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18889
Summary: Live Messenger 2008 fails to load - possible actctx
problem
Product: Wine
Version: 1.1.16
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: andras(a)csevego.net
Created an attachment (id=21730)
--> (http://bugs.winehq.org/attachment.cgi?id=21730)
+actctx,+relay log
Starting of installed (on windows) Msn 2009 wil result:
err:module:import_dll Library MSVCR80.dll (which is needed by
L"Z:\\media\\disk\\Program Files\\Windows Live\\Messenger\\msnmsgr.exe") not
found
err:module:LdrInitializeThunk Main exe initialization for
L"Z:\\media\\disk\\Program Files\\Windows Live\\Messenger\\msnmsgr.exe" failed,
status c0000135
Same load failure, when I manually install with wine (from msi packages)
MSVCRT 8.0 is installed, as shown attached +actctx,+relay log
I suspect here an Activation Context failure.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24614
Summary: Medieval Total War crashes on startup
Product: Wine
Version: 1.2
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3dx9
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: th.seltsam(a)gmail.com
CC: wine-bugs(a)winehq.org
Running the game just shows a black window, no crash dialog, and an infinite
console output
err:d3dx:assemble-shader Asm reading failed
err:d3dx:assemble-shader Asm reading failed
err:d3dx:assemble-shader Asm reading failed
err:d3dx:assemble-shader Asm reading failed
Using d3dx9-36 did not solve the problem.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11436
Summary: Pepakura viewer: err:wgl:X11DRV_wglShareLists Could not
share display lists, context already created !
Product: Wine
Version: CVS/GIT
Platform: PC
URL: http://www.tamasoft.co.jp/pepakura-
en/download/viewer.html
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: x11-driver
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fabio.capela(a)yahoo.com
Created an attachment (id=10567)
--> (http://bugs.winehq.org/attachment.cgi?id=10567)
Trace until the error.
I'm trying to run the Pepakura viewer, but it's giving an strange error on
startup (error: no error) and is having some graphical glitches, as well as
being extremely slow.
The grafical glitches are a flickering 3D model and no textures on the 2D
model.
The bug seems to be the same one affecting Pepakura Designer 2.
The console shows an error with X11DRV_wglShareLists
(err:wgl:X11DRV_wglShareLists Could not share display lists, context already
created !). I've attached a wgl trace up to the moment the error dialog
appears. Seems like the workaround to handle the different way to share OpenGL
contexts in Windows and Linux can't handle this specific software.
The software is freeware and can be downloaded from
http://www.tamasoft.co.jp/pepakura-en/download/viewer.html
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21983
Summary: Buttons come on each other in Proteus
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ssserkkk(a)yahoo.com
hi!
The buttons in ISIS and ARES come on each other. The ones that create this
problem are "subcircuit mode ile terminals mode",
"virtual instruments mode and 2D graphics line mode" in ISIS program;
"connectivity highlight mode and round through-hole pad mode", "padstack mode
and 2D graphics line mode" in ARES.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24078
Summary: The Last Remnant demo: Window size is too small
Product: Wine
Version: 1.3.1
Platform: x86-64
URL: http://news.bigdownload.com/2009/02/26/download-the-la
st-remnant-demo/
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
On windows, the window size is the width of your screen, but on wine, it's
about 1/3 of the size.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26658
Summary: Steam startup slow on Wine
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
On my nice fast laptop with a 15 Mbit/sec internet connection and wine from
git,
it takes 20-30 seconds from the time the "Connecting Steam Account: Foo"
appears to the time it gains a cancel button. This is about two or three times
longer than on Windows 7 on the same hardware.
The extra time makes starting Steam much more annoying.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15255
Summary: ntdll: The memory overview Page in Google Chrome is
incomplete (MemoryWorkingSetList for
NtQueryVirtualMemory)
Product: Wine
Version: CVS/GIT
Platform: PC
URL: http://chrome.google.com
OS/Version: Linux
Status: NEW
Keywords: download, source
Severity: normal
Priority: P3
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wine.dev(a)web.de
Created an attachment (id=16041)
--> (http://bugs.winehq.org/attachment.cgi?id=16041)
about:memory
Display the Memory status Page with "about:memory"
The Virtual Memory status is displayed (Private and Mapped),
but the Resident memory size is 0 (Private, Shared and Total)
0019:fixme:virtual:NtQueryVirtualMemory (process=0xffffffff,addr=(nil))
Unimplemented information class: MemoryWorkingSetList
0019:fixme:virtual:NtQueryVirtualMemory (process=0x108,addr=(nil))
Unimplemented information class: MemoryWorkingSetList
--
By by ... Detlef
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22522
Summary: black intro videos with smackw32.dll
Product: Wine
Version: 0.9.48.
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hoehle(a)users.sourceforge.net
"Der Dieb von Burg Schreckenstein" and "5 Freunde 2 und der silberne
Turm" start with a black screen when it should show an intro video.
Audio is played normally and the app proceeds to the main menu after
the video ends. Also, pressing a key aborts the video as expected.
The video is visible on a native XP machine.
Both apps use smackw32.dll to display the video. I suppose the screen
remains black because an exception is caught soon after start.
0009:CALL smackw32._SmackDoFrame@4(008c5440) ret=0049ef3d
0009:Call winmm.timeGetTime() [a few times]
0009:Ret winmm.timeGetTime()
0009:trace:seh:raise_exception code=c0000005 flags=0 (access violation)
...
0009:RET smackw32._SmackDoFrame@4() retval=00000000 ret=0049ef3d
The sequence of smackw32 calls is:
smackw32._SmackOpen@12
smackw32._SmackCheckCursor@20
smackw32._SmackToBuffer@28
smackw32._SmackDoFrame@4
The affected video is "intro.smk". Curiously, this is the second such
sequence. The first one, opening "loads.smk" produces no exception
(but it is too short to be a video). Surprisingly, Burg
Schreckenstein's ending credits extro_[1-7].smk are rendered (these
appear to be still images without animation).
Logs are available upon request. What channels?
You may add
[Smacker]
Debug=1
to win.ini and set WINEDEBUG=+debugstr.
I've not yet written an AppDB entry for either of these 2 children apps.
"5 Freunde" is Enid Blyton's "Famous 5" or "Club des cinq".
Bug present with both Ubuntu Intrepid and MacOS, on different HW and was
observed as early as wine-0.9.48 to present.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23134
Summary: iexplore does not correctly detect proxy details
Product: Wine
Version: 1.2-rc3
Platform: x86
OS/Version: Linux
Status: NEW
Keywords: download, source
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kennybobs(a)o2.co.uk
Blocks: 19261
I have an Ubuntu Lucid system that has the proxy preferences set up for HTTP
and FTP. Native applications use the proxy for HTTP and FTP but all other
protocols bypass the proxy. iexplore doesn't. The result being that when a
HTTPS page is opened, there is a failure (proxy does not support HTTPS). Using
Squid.
The following error was encountered while trying to retrieve the URL:
https://accounts.sling.com/accounts/login?
Unsupported Request Method and Protocol
Squid does not support all request methods for all access protocols. For
example, you can not POST a Gopher request.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25128
Summary: Missing flashing border on the stage select screen of
Pikachu Volleyball 3D
Product: Wine
Version: 1.3.6
Platform: x86-64
URL: http://rev.knu.ac.kr/down/PV3DSetup.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: directx-d3dx9
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: RandomAccountName(a)mail.com
CC: wine-bugs(a)winehq.org
Created an attachment (id=31880)
--> (http://bugs.winehq.org/attachment.cgi?id=31880)
Full output
Choosing "single play" from the main menu leads to a stage selection screen
with a small image of each stage to choose from. The current selection is
supposed to be indicated by a fade effect and a multicolored flashing border.
The fade effect works, but the border always remains black. winetricks d3dx9_36
makes it work correctly.
On this screen, the terminal is flooded with a series of fixmes:
fixme:d3dx:ID3DXLineImpl_Begin (0x217fc0)->(): stub
fixme:d3dx:ID3DXLineImpl_Draw (0x217fc0)->(0x782b58, 5, 0xff0000ff): stub
fixme:d3dx:ID3DXLineImpl_End (0x217fc0)->(): stub
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23356
Summary: Napoleon Total War: black screen without winetricks
d3d9x
Product: Wine
Version: 1.2-rc4
Platform: x86-64
URL: http://www.totalwar.com/napoleon/demo/
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: directx-d3dx9
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
CC: wine-bugs(a)winehq.org
The log shows several d3dx stubs are causing it trouble:
implemented
fixme:d3dx:D3DXGetImageInfoFromFileInMemory Invalid or unsupported image file
fixme:d3dx:D3DXCreateTextureFromFileInMemoryEx (0x8eafae8, 0xd7ee731, 1440128,
4294967294, 4294967294, 1, 0, fffffffd, 1, 2, 5, 0, (nil), (nil), 0x8f53864):
stub
...
fixme:d3dx:ID3DXEffectImpl_SetMatrixTranspose (0x8f54f58)->(0x1642ea0,
0x8ea54fc): stub
fixme:d3dx:ID3DXEffectImpl_SetTechnique (0x8f54f58)->(0x1642eac): stub
...
d3d call failed, code: 0x80004001
d3d call failed, code: 0x80004001
d3d call failed, code: 0x80004001
d3d call failed, code: 0x80004001
d3d call failed, code: 0x80004001
winetricks d3dx9 lets it start with graphics.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21940
Summary: Rise of Legends Demo crashes with null pointer
reference in msxml3?
Product: Wine
Version: 1.1.40
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: msxml3
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
Once you get past bug 19539, you have to choose to ignore
two BHG errors; the game then starts and runs (though I got
no sound). Trying to play a campaign crashed for me quickly with
an msxml3 error (which is funny, since I had done winetricks msxml3,
and winecfg shows the override, but the backtrace still shows Wine's msxml3):
Unhandled exception: page fault on read access to 0x00000000 in 32-bit code
(0x7362be22).
Backtrace:
=>0 priv_from_xmlDocPtr+0x6(doc=(nil)) [dlls/msxml3/domdoc.c:127] in msxml3
1 xmldoc_add_ref+0x1d(doc=(nil)) [dlls/msxml3/domdoc.c:160] in msxml3
2 init_xmlnode+0x26(This=0x3fb63f8, node=0x7e222980, outer=0x3fb6418,
dispex_data=0x73666dec) [dlls/msxml3/node.c:1714] in msxml3
3 create_element+0x6c(element=0x7e222980) [dlls/msxml3/element.c:797] in
msxml3d
4 create_node+0x9d(node=0x7e222980) [dlls/msxml3/node.c:1736] in msxml3
5 queryresult_nextNode+0xdf(iface=0x3ff1120, nextItem=0x32ad60)
[dlls/msxml3/queryresult.c:267] in msxml3
6 xmlnode_selectSingleNode+0xd3(iface=0x1e9510, kqueryString="TRIBE_MASK",
resultNode=0x32ad60) [dlls/msxml3/node.c:1542] in msxml3
7 in legends (+0x6f34c) (0x0032b2dc)
...
0x7362be22 priv_from_xmlDocPtr+0x6 [dlls/msxml3/domdoc.c:127] in msxml3: movl
0x0(%eax),%eax
127 return doc->_private;
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27232
Summary: keys stuck when wine window loses focus
Product: Wine
Version: 1.3.19
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hramrach(a)gmail.com
When a key is pressed while a wine application is in focus and released while
other application has focus it is stuck down in wine.
To reproduce:
0) set your window manager to focus follows mouse
1) run notepad
2) press some keys to type text
3) press and hold ctrl, pressing a now selects typed text
4) move the mouse to another window
5) release ctrl
6) move mouse back to notepad, press a
Now text previously selected should be replaced with a. Instead, it is selected
again by the Ctrl+a shortcut.
The Ctrl key is stuck.
Note that when windows are switched by means similar to Windows ALt+Tab the
modifier used for switching windows this way gets also stuck.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23583
Summary: Kaspersky Internet Security 2010 needs FLTMGR.SYS to
install in Vista and Win 7 mode
Product: Wine
Version: 1.2-rc7
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bojan(a)antonovic.ch
Created an attachment (id=29472)
--> (http://bugs.winehq.org/attachment.cgi?id=29472)
install log
See summary and attachment.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11773
Summary: Mathematica 5.1, Display errors, unreadable.
Product: Wine
Version: 0.9.55.
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jacobidiego(a)gmail.com
Hello.
I have previously filed a bug about Mathematica not being able to install:
URL: http://bugs.winehq.org/show_bug.cgi?id=11725
And this same bug in one report which will be marked as invalid:
http://bugs.winehq.org/show_bug.cgi?id=11765
The errors of this report is:
- Some characters are not displayed as they should.
Writing an expression like: (2+x)/(x^2-3) will be showed as (2+x)}(x^2-3).
Note the "/" is changed by "}", but double "//" is correctly showed as "//".
Also Pressing x² makes Mathematica crashes just becouse the correct expression
is x^2 and not x² or x³.
Also there seems to be some conditions for the "/" to be drawed, like if it is
preceded by a variable o number: see 1/x or x/(x-3) then the "/" will be
drawed, but if is is preceded by a ) or ] then "}" will be drawed: (x-3)/x or
Sin[x]/x. Thats wear.
- Mathematical representation is badly printed.
When you enter expressions like (2+x)/(x^2-3) Mathematical has the really nice
feature of showing this as a nice looking fraction. Also it can represent it
with ascii characters if you choose that, but with wine, it doesn't shows the
goodlooking expression and shows a terrible badly drawed ascii expression. Just
to say, "1/x" can not be readed with this expression.
But i am not entirely sure when and why. Trying a bit furder and i can get some
examples which are correctly drawn:
Sqrt[x-3]
(x-3)^2//Expand
But a fraction will not be correctly displayed:
(2+x)/(x^2-3)
Maybe this has something to do with the first error that mathematica will show
a "}" instead of a "/": (2+x)}(x^2-3)
All this errors were tested on ubuntu 7.10 AMD64 and with wine 0.9.55 (becouse
.56 is not available yet for ubuntu on your repos) and with all builtin dlls,
but also some natives does the same results.
It is only one of other errors of Mathematica.
I have no logs for that.
Cheers.
Diego
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18388
Summary: Roblox crashes on install with unimplemented function
pdh.dll.PdhMakeCounterPathA
Product: Wine
Version: 1.1.20
Platform: Other
URL: http://wiki.roblox4linux.co.cc
OS/Version: other
Status: NEW
Keywords: download, Installer
Severity: normal
Priority: P2
Component: pdh
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
A user asked for help with this app, see
http://www.winehq.org/pipermail/wine-users/2009-May/053263.html
He said it was his son's favorite game.
Starting the installer goes fine, but it crashes with that
underfined function in pdh.dll.
Winetricks pdh works around it and gets on to the next problem.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24946
Summary: uTorrent Release Candidate 2 (2.2 build 22732) hangs
on start up
Product: Wine
Version: 1.3.6
Platform: Other
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: t.artem(a)mailcity.com
µTorrent hangs on start up here in Wine 1.3.5 and 1.3.6. I've double checked
with an empty $HOME/.wine.
I'm using Fedora 14 i686.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26359
Summary: VMWare Player Setup has no GUI
Product: Wine
Version: 1.3.15
Platform: x86-64
URL: http://www.computerbild.de/download/VMware-Player-9032
75.html
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: nerv(a)dawncrow.de
Created an attachment (id=33580)
--> (http://bugs.winehq.org/attachment.cgi?id=33580)
console log
VMware-player-3.1.3-324285 Setup only has white screen. From console log i
would guess it's gecko related.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.