http://bugs.winehq.org/show_bug.cgi?id=26913
Summary: TradeBlazer V4 hangs when reading file
Product: Wine
Version: 1.3.18
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: cnbiz850(a)sohu.com
attached with winedbg and got the following backtrace:
Wine-dbg>bt 0x9
Backtrace:
=>0 0xf776442e __kernel_vsyscall+0xe() in [vdso].so (0x0032d3c0)
1 0xf75cc8cb __libc_read+0x4a() in libpthread.so.0 (0x0032d3c0)
2 0x7bc43485 NtReadFile+0x2b4() in ntdll (0x0032d3c0)
3 0x7b83eec3 ReadFile+0x252() in kernel32 (0x0032d450)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23347
Summary: After spending a while in Atlantica, I lose the
ability to interact with the environment
Product: Wine
Version: 1.1.44
Platform: Other
OS/Version: Mac OS X 10.6
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ingrid.king(a)gmail.com
Created an attachment (id=29089)
--> (http://bugs.winehq.org/attachment.cgi?id=29089)
truncated log
After spending a few hours logged into Atlantica, I lose the ability to
interact with the environment using my mouse. The problem is moderate at
first, and then becomes more and more severe, to the point where I have to
restart the program to resolve it.
Recently, new UI problems have appeared. Monster Invasion was this weekend,
and whenever I tried to start a fight, my screen would flicker black, and
require me to restart my computer by holding down the power button. This
problem has presented itself while trying to observe a PvP match, and join a
PvP match as well.
I also noticed a new problem where I lose all ability to interact with the
environment, I can't click, I can't type. Before, the click bug was only
related to my ability to select a monster I wished to attack while fighting.
Now it seems to have evolved into a new monster, where I can't do anything at
all but restart. On a side note, these problems seem to have emerged with the
most recent update to my computer's software from Apple. The monster click bug
has been present from the start, however.
I am using Wine.app, version 1.1.44. I am somewhat computer illiterate, so I
apologize if my bug reporting has not met the guidelines = /
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22924
Summary: Nokia Ovi Suite stalls at start-up
Product: Wine
Version: 1.2-rc2
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: extigyro(a)gmail.com
Now in RC2 Nokia Ovi Suite installs successfully (though a little bit slowly)
but when the app is started, it stalls at start-up.
And "NokiaMServer.ex" eats up all the CPU time (Intel Core 2 Duo T7200 - 2 x 2
GHz).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27409
Summary: Can not type in persian
Product: Wine
Version: unspecified
Platform: All
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: m.ghadam(a)gmail.com
Created an attachment (id=35052)
--> (http://bugs.winehq.org/attachment.cgi?id=35052)
Wine debug log
It is not possible to type persian .
I have attached the debug log which is taken by :
WINEDEBUG=+x11drv,+key,+keyboard,+event wine notepad &>persian_kbd.log
I just switched keyboard to persian and try to typing , but nothing is shown.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23969
Summary: Delphi TDateTimePicker does not have day, month or
year selected when first tabbed into
Product: Wine
Version: 1.2
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: maya.mcleod(a)gmail.com
Delphi's date picker (TDateTimePicker) does not have day, month or year
selected when first tabbed into.
You need to press the right-arrow to select the day (or month, or year).
Confirmed with Delphi 2006, 2009, with and without windows themes enabled.
Might happen with no-Delphi apps as well, but unconfirmed.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21290
Summary: URU: path of the shell no longer alows window
managment.
Product: Wine
Version: 1.1.36
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: spammaster(a)madtracker.net
When starting URU path of the shell. The application window dissapears. The
process keeps running as I can hear the sound and music still playing.
This bug only occurs when I select both options: let window manager decode the
window and let window manager control the window.
If I select one of both the game still runs fine. Only with both options
selected, the crash occurs.
This is tested on a clean wineprefix and the bug has occured at wineversion
1.1.36
Everything runs great on version 1.1.35
Running on Nvidia driver 190.53
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18524
Summary: Management By Statistics System Crashes upon start
winevdm.exe encounters serious problem
Product: Wine
Version: 1.1.21
Platform: PC-x86-64
URL: http://www.mastertech.com
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P1
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: sasciame(a)yahoo.com
Wine crashes when I clicked on the program to run.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23436
Summary: Indic language display - wrong character order,
missing glyphs
Product: Wine
Version: 1.2-rc5
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: DanielErikThomas(a)gmail.com
Created an attachment (id=29234)
--> (http://bugs.winehq.org/attachment.cgi?id=29234)
Notepad screenshot
Indic languages are not displaying correctly in wine. I have tried Hindi and
Bengali, and for both:
- Vowel order is not correct. Some vowels -- e.g. equivalents of 'e' and 'i'
-- are typed after the consonant, but should be displayed before it. Instead
they are displayed after (these are all L to R)
- Combined consonant glyphs are not displayed.
I have the same problem in Wine's Notepad, and several other Windows programs
running under wine. I am using ttf fonts that work fine in linux outside wine,
and under windows. I've also tried both the default ubuntu keyboards and a
separate scim-based input method (avro), with the same results.
(Running Ubuntu 10.04; Same display problems with Notepad, the Word, eSword.
MS Word 2007 crashes when I try using either input method.)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23040
Summary: USB Gamepad not working
Product: Wine
Version: 1.2-rc2
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-dinput
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: atomkarinca(a)gmail.com
I have two USB gamepads and I get the same error output from both. I am trying
to run PES 2010 with gamepad enabled. When I run the game with
WINEDEBUG=+joystick wine pes2010.exe
I get the following lines:
trace:joystick:JSTCK_GetDevCaps Driver: 0x020100, Name: USB Gamepad , #Axes: 6,
#Buttons: 10
warn:joystick:JSTCK_GetDevCaps Unknown axis 40(5). Skipped.
So, as I understand the gamepad is recognized but somehow an axis is preventing
me to use it. I tried to recalibrate the gamepad with jscal but to no avail. I
also tried adding a registry value to HKCU\Software\Wine\DirectInput but yet
again no improvement.
Any idea on how I can get this unknown axis to be recognized?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=20513
Summary: Family Tree Maker 2006 crashes when importing a GEDCOM
file
Product: Wine
Version: 1.1.32
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P5
Component: ole32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: neil.sheed(a)gmail.com
Created an attachment (id=24431)
--> (http://bugs.winehq.org/attachment.cgi?id=24431)
Trace log of error
At the end of the GEDCOM import process (File - Append/Merge - select GEDCOM
file). File is imported successfully ("There were no warnings or errors
generated during import.")
Application then tries to create a backup file - on clicking ok the application
displays a dialog "A serious internal error has occurred. Please quit and then
restart Family Tree Maker."
Terminal window shows:
fixme:storage:StgCreateDocfile Storage share mode not implemented.
fixme:storage:StorageImpl_Commit (0x216be0 1): stub
... repeated 4 times
fixme:storage:StorageImpl_Commit (0x1f3320 1): stub
... repeated once
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:htmlhelp:HTMLHelpW HH case HH_CLOSE_ALL not handled.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18144
Summary: Rainmeter skin backgrounds are not transparent (Kwin &
Compiz)
Product: Wine
Version: 1.1.19
Platform: Other
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: miketrml(a)gmail.com
Created an attachment (id=20607)
--> (http://bugs.winehq.org/attachment.cgi?id=20607)
Rainmeter's black background in a virtual window. The black border is also
evident on the desktop.
I have looked throughout the database to find one or two workable programs
similar to this bug. I will list them here within this bug report as no listed
bug specificly deals with Rainmeter's issue.
Rainmeter is a program which displays various GUI elements within Windows,
featuring system information neatly displayed in a varying array of skinned
elements, whether they be text, abstract graphic, anime, or otherwise.
The program installs itself with no issue. The skin loads given the nature and
workaround of bug 18142, a GDIPLUS-related issue in which Winetricks will
install.
The problem is presented upon actually having loaded a skin. The background
appears to be virtually black, and upon changing the program's transparency
from an option within Rainmeter, the black background also changes transparency
with the skin, allowing the wallpaper behind it to show through.
When initially clicking on the window, the black background goes transparent
for a half a second or so and then reprints the black background. Also, no
matter if you're using Compiz or Kwin under KDE 4.2.2, this is a problem
persisting in it's existance.
10091 is a similar bug to this, but this problem persists under Kwin as already
stated. Secondly, the bug also exists regardless whether or not Rainmeter is
loaded within a virtual window.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27493
Summary: Derive 6 (computer algebra system) hlp file errors
Product: Wine
Version: unspecified
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: Doug(a)Dougtelford.com
Created an attachment (id=35152)
--> (http://bugs.winehq.org/attachment.cgi?id=35152)
shows logs and output of processing hlp file on linux and windows xp
Derive6.hlp file is not processed correctly. Works fine on windows XP.
See attachment
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=20811
Summary: query.c:224 Test Failed: IDirect3DQuery9_GetData a 2nd
time on a ended query returned 00000001
Product: Wine
Version: 1.1.33
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: testcases
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: celticht32(a)aol.com
Looking at the wine test results for the following test:
query.c in the d3d9 tests directory...
hr = IDirect3DQuery9_GetData(pQuery, data,
IDirect3DQuery9_GetDataSize(pQuery), D3DGETDATA_FLUSH);
ok(hr == S_OK, "IDirect3DQuery9_GetData on a ended query returned %08x\n",
hr);
hr = IDirect3DQuery9_GetData(pQuery, data,
IDirect3DQuery9_GetDataSize(pQuery), D3DGETDATA_FLUSH);
ok(hr == S_OK, "IDirect3DQuery9_GetData a 2nd time on a ended query
returned %08x\n", hr);
the MSDK says the following :
IDirect3DQuery9::GetData
Polls a queried resource to get the query state or a query result. For more
information about queries, see Queries (Direct3D 9).
Return Values
The return type identifies the query state (see Queries (Direct3D 9)). The
method returns S_OK if the query data is
available and S_FALSE if it is not. These are considered successful return
values. If the method fails when
D3DGETDATA_FLUSH is used, the return value can be D3DERR_DEVICELOST.
The test fails with :
query.c:224: Test failed: IDirect3DQuery9_GetData a 2nd time on a ended query
returned 00000001
which is a S_FALSE (1) which just means the data is not available... which
according to the MSDN site is an ok value to return... and is a success.
Also reading the MSDN the D3DGETDATA_FLUSH is supposed to flush the query so
the value its returning is ok...
So If I am understanding the above code the first one should return a S_OK
saying that it flushed the query code.... Then the second call should return a
S_FALSE because the query has nothing in it.....
Stephan said in Dev list :
I guess its fine to accept this result then. I think the original motivation
behind these tests was that HL2 called GetData() more than once and this raised
GL errors - the query code now filters such calls out to prevent calling bad GL
calls. My guess is that its ok to modify the test to accept both results. Ie,
ok(hr == S_OK | hr == S_FALSE, "...");
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16433
Summary: impossible to ignore a runtime assertion
Product: Wine
Version: 1.0.1
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mauro(a)linux.ca
I have a program that after ignoring an assertion works perfectly on windows...
In wine it could probably be the same but the assertion dialog misses the
ignore button having only OK and Cancel
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14899
Summary: Quicken One Step Update fails - 'com error'
Product: Wine
Version: 1.0.0
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: headofbucket(a)gmail.com
Created an attachment (id=15470)
--> (http://bugs.winehq.org/attachment.cgi?id=15470)
Console output for com error.
Quicken 2008 Update 7 crashes when attempting to do one step update with a
message 'com error'.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24915
Summary: Lord or the Rings Installer Hangs on Mac
Product: Wine
Version: 1.3.5
Platform: x86
OS/Version: Mac OS X 10.6
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: happyslaps(a)gmail.com
The installer for Lord of the Rings Online hangs on mac with this error
Log file is being written to C:\users\ayers\Temp\lotrohigh.exe.log
err:seh:setup_exception_record stack overflow 1760 bytes in thread 0026 eip
7bc30d3c esp 05470c50 stack 0x5470000-0x5471000-0x5670000
This does not occur on with wine 1.3.5 on Ubuntu 10.10.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17560
Summary: Mercury Mail SSL/STARTTLS does not work
Product: Wine
Version: 1.1.16
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: admin(a)linux-tstephenson.com
When trying to make a connection to the Mercury v4.62 server via POP3, SMTP or
IMAP4 the STARTTLS function error out with the following error:
10:56:18.275: Connection from 127.0.0.1, Sat Feb 28 10:56:18 2009<lf>
10:56:18.336: << * OK linux-tstephenson.com IMAP4rev1 Mercury/32 v4.62 server
ready.<cr><lf>
10:56:18.337: >> A1 CAPABILITY<cr><lf>
10:56:18.338: << * CAPABILITY IMAP4rev1 STARTTLS AUTH=PLAIN X-MERCURY-1<cr><lf>
10:56:18.338: << A1 OK CAPABILITY complete.<cr><lf>
10:56:18.339: >> A2 STARTTLS<cr><lf>
10:56:18.339: << A2 OK Begin SSL/TLS negotiation now.<cr><lf>
10:56:18.340: 20: Error -3 creating CryptLib session.
10:56:18.345: --- Connection closed normally at Sat Feb 28 10:56:18 2009. ---
10:56:18.345:
This is very similar to the Pegasus Mail bug 14797 since both are using the
same crypto library.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13608
Summary: Test tool on windows makes XP completely reboot
Product: Wine
Version: unspecified
Platform: PC-x86-64
URL: http://test.winehq.com/data/0b6acfbce7b0bf2aedb5176bfa95
9edc3f0d74f6/
OS/Version: Windows XP
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: saintk(a)specialattack.net
CC: saintk(a)specialattack.net
Running this test;
Main summary for build 0b6acfbce7b0bf2aedb5176bfa959edc3f0d74f6
Results in a full system reboot at my end.
This is what i can capture from my windows event log;
Faulting application d3d9_test.exe, version 0.0.0.0, faulting module d3d9.dll,
version 5.3.3790.3959, fault address 0x000a488a.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Any additional info;
OS: Windows XP x64 SP2
Hardware used;
Asus Maximus Formula
Unknown 350GB Sata disk
Asus EAX1950XTX PCI-E
4GB DDR2 Geil RAM @ 800MHz
Everything is clocked default (no overclocking applied). System runs stable
during stability tests both on the GPU and CPU.
If any more information or testing is required don't hessitate to contact me.
Only 'downside' i don't know anything about debugging of any kind. Neither am I
an active wine user. I just ran the test because i do support the idea behind
the project.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27334
Summary: Fitday hangs after drop menu selection made
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jrstone88(a)gmail.com
Fitday will become unresponsive for a short time(sometimes never recovering)
after a selection is made in a drop menu. The the drop down menu are not the
standard windows drop menu, they are some custom written control.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27027
Summary: Settlers 6 (v1.6) - All animation type graphics shows
in white, sounds disappears sometimes in campaigns
Product: Wine
Version: 1.3.12
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: admin(a)dominion-it.co.za
Created an attachment (id=34463)
--> (http://bugs.winehq.org/attachment.cgi?id=34463)
Log file when running exe directly.
Settlers 6 (v1.6) - All animation type graphics shows in white, sounds
disappears sometimes in campaigns
Linux : openSuse 11.4 Celadon
Graphics was first almost usable peoples faces was purple and 3d almost
viewable
did linux update to latest what openSuse offers and it worsened to all
animation type graphics being white and campaign mappes almost totally white.
Looked at log file, seems to be linked to DirectX 3d implementation. (file
attached)
We are going to download the 1.7 patch of the program (161 mb) and then try
also with that and will give feedback. but this is the current problem we
experience.
Thanks you.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25127
Summary: Mass Effect DVD Value Edition doesn't start
Product: Wine
Version: 1.3.6
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: emanuele.emalele(a)gmail.com
Created an attachment (id=31878)
--> (http://bugs.winehq.org/attachment.cgi?id=31878)
Console output when launchig ME Config Tool
Graphics driver used: ATI fglrx ver 10.10
Game installation works until final step of vcredist which crash, anyway the
game results installed.
Installed patch 1.02, done winetricks for vc2005sp1 redist: game's launch
returns to command prompt.
Launching game config tool: program launched successfully but it complains
about missing directx installation and the list of video and audio device is
empty.
Done winetricks for d3dx9 and then used ALL the d3dx9 in native mode: game's
launch simply returns to the command prompt.
Installed directx from Mass Effect DVD: as above and the config tool reports
missing directx.
Attached the console output when executing config tool and choose to check
video device which results empty.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16600
Summary: Ventrilo starts having a long delay after some time
Product: Wine
Version: 1.1.10
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: thgreasi(a)uth.gr
Some times Ventrilo (after random time passed) starts having a long delay to
transmit & receive the voip stream. If you restart Ventrilo the problem gets
fixed for a while. I'm using Ventrilo without PushToTalk while playing warcraft
3: TFT but the same problem have occured to me even when I was not running
anything else.
Extra notes:
*I run the linux version of Ventrilo Server on my PC.
*The transmit & receive delay has an average Round Trip Time of 10 seconds when
it occurs.
I'm using Ubuntu 8.10
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24333
Summary: [TMG 4.0d]Question Dialog box appears squashed/smaller
than normal
Product: Wine
Version: 1.3.2
Platform: x86
URL: http://appdb.winehq.org/objectManager.php?sClass=versi
on&iId=11482
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: saturn_systems(a)yahoo.com
In TMG4 the Question Dialog box appears squashed/smaller than normal and you
can not progress any further (see attachments)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18319
Summary: Sony Vegas Movie Studio Platinum 9.0a: video preview
doesn't work
Product: Wine
Version: 1.1.19
Platform: PC
URL: http://www.sonycreativesoftware.com/products/vegasfamily
.asp
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: nobange(a)poczta.onet.pl
This program is the only one movie editor I found working kinda good on Linux
with Wine. But it has a few issues, the main toolbar looks weird, audio plugins
registry entries must be deleted from registry or the app desn't launch, and
the major issue is the preview function, which doesn't work at all. I can live
without audio plugins, but preview is necessary for normal work. Preview window
shows only solid color, sometimes it changes a bit when you move through the
clip on timeline, but it never shows the content of the clip. It's very
difficuilt to make movies without preview function, you can rely only on
screenshots from the preview. Screenshots saved to disk show what preview
should show - the really content of the clip with all used effects, transitions
etc.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18085
Summary: Dexon Console doesn't start with WINE
Product: Wine
Version: 1.1.19
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: correo.cuervo(a)gmail.com
Created an attachment (id=20504)
--> (http://bugs.winehq.org/attachment.cgi?id=20504)
Copy of terminal contents from the starting process
I've installed Oracle Support for Dexon, NET Framework as base for Dexon
Console ... the installation process has ended sucessfully.
But, when I'm tryng to start the Dexon Console program ... it doesn't start.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22019
Summary: Large black rectangles flicker in and out on some
games in Steam
Product: Wine
Version: 1.1.40
Platform: x86
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
Several times a second, a large rectangle (usually the same one depending
on the game or screen) flickers to black. This is pretty annoying.
This happens on Braid Demo and Call of Duty 2, but not on Portal: First Slice
or Total War: Napoleon, all tested under Steam.
It does not happen on the non-steam version of Braid Demo
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19614
Summary: Multiplayer in Total Annihilation using native
directplay dlls locks up after game completes.
Product: Wine
Version: 1.1.26
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hughperkins(a)gmail.com
When playing a multiplayer game in Total Annihilation using native directplay
dlls, the program locks up at the end of a game.
This doesn't prevent the game being played, but it would be nice to fix.
Note that this is using the directplay dlls from microsoft, rather than those
that come with wine, following the instructions at
http://wiki.winehq.org/DirectPlayGames.
Bug http://bugs.winehq.org/show_bug.cgi?id=4066 documents that wine does not
implement an appropriate directplay itself for Total Annihilation at this time.
Mostly I'm creating this new bug just to document it for now in the appdb for
total annihilation.
Note that this issue is touched on in the comments for bug
http://bugs.winehq.org/show_bug.cgi?id=11130 , but it is not the original bug
that that bug report refers to.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14881
Summary: Rainbow 6 - Vegas 2
Product: Wine
Version: CVS/GIT
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: cruiseoveride(a)gmail.com
Created an attachment (id=15442)
--> (http://bugs.winehq.org/attachment.cgi?id=15442)
Calltrace
Rainbow 6 - Vegas 2 Crashes with:
x:\Perforce\bishop\CodePcPort\UnrealEngine3\Development\External\framework\gear\private\src\thread\ms\thread.cpp(324)
: ASSERT FAILURE: Ret()
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14067
Summary: Virtual desktop window refreshing
Product: Wine
Version: 1.0.0
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: winex11.drv
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: markk(a)clara.co.uk
Hi,
(Using Ubuntu 8.04, GNOME desktop, Wine 1.0)
This is a question about virtual desktop mode.
When the virtual desktop window is minimised then restored, or brought to the
front after being covered by another window, Wine appears to tell the Windows
applications to refresh their windows. (At least, on my old slow system I
notice buttons etc. being redrawn - restoring the virtual desktop window is not
instantaneous.) Is that correct? Surely it would be better for compatibility
and speed if Wine caches the whole virtual desktop bitmap when the window is
not visible, so it can be instantly displayed when the virtual desktop window
is restored/revealed. Could some Windows programs assume that if they are the
only window on the desktop, that they don't need to refresh their window
imagery?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27121
Summary: Cannot run game - Mickey Pre-School Adventures
Product: Wine
Version: 1.3.19
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: admin(a)dominion-it.co.za
Created an attachment (id=34588)
--> (http://bugs.winehq.org/attachment.cgi?id=34588)
Mickey Preschool Adventures debug log file
Game : Mickey Pre-School Adventures
wine version : 1.3.19
System : openSuse 11.4
Symptom :
Program installs fine, but when trying to play program it immediatly starts
throwing error messages (cannot see them in log file) mostly related to
Director Player
Some of them are
Object Exception
#getPad
I have made a log file with
WINEDEBUG=+seh,+tid
I see the program uses 3rd party components to get it to work in a folder
called Xtras when installed, dont know if it is related to the errors, tried to
copy all these files to same path as the exe but still no log.
hope this helps.
thank you
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24235
Summary: dinput joystick does not listen to jscal calibration
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-dinput
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ailin.nemui(a)gmail.com
I have a joystick calibrated with the "polarity" of the axis switched (e.g. up
is down + down is up). To do this, in the js calibration utility jscal simply
put the position to the apparent "maximum" number when it asks for the minimum
and vice versa.
this setup works fine in linux games and e.g. "Joystick
Tester":http://www.softpedia.com/get/System/System-Miscellaneous/Joystick-Tester.shtml
(which is apparently not using dinput)
but in the game (Morrowind), the calibration is ignored. up should be down and
down should be up, but it is not (I guess it is looking at the numbers that I
get shown in "jscal")
If it can't be fixed, maybe a hack in the Joystick-Axes-Dinput-Registry key
could be made to allow mirroring of axes :/?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16564
Summary: Please implement OleCreatePropertyFrame
Product: Wine
Version: CVS/GIT
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: ole32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: w41ter(a)gmail.com
fixme:ole:OleCreatePropertyFrame
(0x30094,0,0,(null),1,0x32fabc,1,0x32fa9c,0,0,(nil)), not implemented
(olepro32.dll)
I get that message when I use a stock charting program that's implemented
as an ocx application. The message appears when I right-click on a chart
to call a popup menu.
I really can't use the program without that popup menu, so I'd be truly
grateful if one of you wine wizards would do this.
Thanks!
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24062
Summary: Starcraft app do not recognize
DirectDrawRenderer=opengl in VIA k8m800 chipset
Product: Wine
Version: unspecified
Platform: Other
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: damarper(a)gmail.com
I'm trying to play Starcraft but the game is just too slow. Change the registry
to DirectDrawRenderer=opengl doesn't help.
Thank you!
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27494
Summary: FlashDevelop doesn't start, throws error
Product: Wine
Version: 1.3.22
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: antony.gelberg(a)gmail.com
Created an attachment (id=35154)
--> (http://bugs.winehq.org/attachment.cgi?id=35154)
Log file
After installing all the deps for FlashDevelop (flashdevelop.org), I thought
running the software would be the easy bit. But it bailed with an exception.
I've attached the log. I think it's a Mono exception but I'm not sure. I
installed Mono with winetricks mono2010.
This was on git master - wine-1.3.22-78-g4b2bfb4. Please let me know if you
need any more information.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17959
Summary: SplashID crashes with fixme:commdlg:GetFileName95 Flags
0x00800000 not yet implemented
Product: Wine
Version: 1.1.18
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: comdlg32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: winehq(a)askneil.com
Created an attachment (id=20306)
--> (http://bugs.winehq.org/attachment.cgi?id=20306)
full output from wine app crash
I was trying to get splashid working with wine. Splashid installer
is available from:
http://www.splashdata.com/splashid/download/standalone.htm
The installation worked fine. I tried to import data from an
existing splashid instance. As the import was happening I
got this error:
fixme:commdlg:GetFileName95 Flags 0x00800000 not yet implemented
wine: Unhandled page fault on read access to 0x00000022 at address 0x412bae
(thread 0009), starting debugger...
Unhandled exception: page fault on read access to 0x00000022 in 32-bit code
(0x00412bae).
Register dump:
CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b
EIP:00412bae ESP:0033cb9c EBP:00000000 EFLAGS:00010246( - 00 -RIZP1)
EAX:00a77e48 EBX:00000000 ECX:00000000 EDX:00000000
ESI:00000000 EDI:00a77f4c
(I've added the full trace as an attachment)
I am running wine-1.1.18, linux 2.6.27, gcc 4.3.3, on a gentoo box.
Splashid had an identical crash when trying to restore as it did while
importing.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27431
Summary: GetModuleFileNameW behaves unexpectedly when
applications use a hardcoded hmodule=0x10000000
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: kernel32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: rswarbrick(a)gmail.com
Created an attachment (id=35079)
--> (http://bugs.winehq.org/attachment.cgi?id=35079)
Log file as described in the report
SUMMARY:
========
Some code stupidly assumes that the hModule parameter describing the current
exe is always 0x10000000. On my system, at least, this isn't true. The software
then fails to work properly when it calls GetModuleFileName.
WHAT I FOUND / TO REPRODUCE:
============================
I'm trying to get the Onzo energy meter software [1] working and was confused
by messages like:
12:55:57: Debug: src/helpers.cpp(140): 'CreateActCtx' failed with error
0x0000007b (no more data available).
appearing on the stderr. It turns out that this is a wxPython message from a
failing call to CreateActCtx. The Onzo software is closed-source, but the code
in helpers.cpp that's calling CreateActCtx is probably what you get from
downloading something at [2]. In particular, it might well be the following:
static ULONG_PTR wxPySetActivationContext()
{
OSVERSIONINFO info;
wxZeroMemory(info);
info.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
GetVersionEx(&info);
if (info.dwMajorVersion < 5)
return 0;
ULONG_PTR cookie = 0;
HANDLE h;
ACTCTX actctx;
TCHAR modulename[MAX_PATH];
GetModuleFileName(wxGetInstance(), modulename, MAX_PATH);
wxZeroMemory(actctx);
actctx.cbSize = sizeof(actctx);
actctx.lpSource = modulename;
actctx.lpResourceName = MAKEINTRESOURCE(2);
actctx.hModule = wxGetInstance();
actctx.dwFlags = ACTCTX_FLAG_HMODULE_VALID |
ACTCTX_FLAG_RESOURCE_NAME_VALID;
h = CreateActCtx(&actctx);
if (h == INVALID_HANDLE_VALUE) {
wxLogLastError(wxT("CreateActCtx"));
return 0;
}
if (! ActivateActCtx(h, &cookie))
wxLogLastError(wxT("ActivateActCtx"));
return cookie;
}
After staring at debug logs for a bit, I realised that GetModuleFileName was
storing "" into modulename and returning 0. Note the bullet-proof code in
wxPython checking whether this happens...
Anyway, I then instrumented GetModuleFileName to find out what was going on (in
a rather low-tech way) adding a line
fprintf (stderr, "hmodule = %p; lpFN = %p; size = %d\n",
hModule, lpFileName, size);
near the start of the function and, once I'd realised that it was
LdrFindEntryForAddress that failed, also printing out a line of the form
fprintf (stderr, "nts = %x\n", nts);
just after it was called. The resulting debug log included lines looking like
this:
hmodule = 0x10000000; lpFN = 0x32daa0; size = 260
and it seems that wxGetInstance() is stupidly returning 0x10000000, which I
recognise from my 1990's Windows-using days and think is what you always used
to get, so maybe it's hardcoded somewhere. This is presumably either in
wxPython or in Onzo's code (the wxGetInstance() basically just returns the
value of a global variable that can be changed by wxSetInstance(), I think).
I'm going to attach a log that I created using this slightly-instrumented wine
build with the command
WINEDEBUG=+actctx,+file,+module /opt/wine/bin/wine onzo_uploader.exe 2>~/LOG
The lines I'm talking about are just above line 13630. The extra "Address
ranges searched" lines come from slightly instrumenting LdrFindEntryForAddress:
NTSTATUS WINAPI LdrFindEntryForAddress(const void* addr, PLDR_MODULE* pmod)
{
PLIST_ENTRY mark, entry;
PLDR_MODULE mod;
fprintf (stderr, "Address ranges searched:\n");
mark = &NtCurrentTeb()->Peb->LdrData->InMemoryOrderModuleList;
for (entry = mark->Flink; entry != mark; entry = entry->Flink)
{
mod = CONTAINING_RECORD(entry, LDR_MODULE, InMemoryOrderModuleList);
fprintf (stderr, " %p -> %p\n",
mod->BaseAddress,
mod->BaseAddress + mod->SizeOfImage);
...}}
which I did to check my guess was right about the base address being nonsense.
IDEAS FOR FIXING
================
I'm not sure what the correct way to go about fixing this is. I suppose one
thing is to check that this really is due to Onzo/wxPython doing something
stupid rather than Wine telling their software an incorrect base address
somewhere else. I'm not quite sure how to go about doing that.
If it is just a hard-coding that actually works on Windows (I presume that
Windows's ASLR doesn't mess it up?), maybe LdrFindEntryForAddress needs to
hardcode its answer for 0x10000000? But that's really really horrible...
Ideas??
Rupert
[1] http://download.sse.co.uk/OnzoDownloader/onzo_uploader_latest.msi
[2] http://www.wxpython.org/download.php
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24675
Summary: Civilization V shows terrain and units in grey when
using low overlay quality
Product: Wine
Version: 1.3.4
Platform: x86-64
OS/Version: Mac OS X 10.6
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mikko.ronkko(a)iki.fi
Created an attachment (id=31190)
--> (http://bugs.winehq.org/attachment.cgi?id=31190)
Output to console
The game video options has a setting "overlay quality". This has three options:
high, medium, and low. If low is chosen, all units and terrain are grey making
the game completely unplayable.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18227
Summary: HL2 Ep2 / Portal: Massive slowdown in some areas
Product: Wine
Version: 1.1.20
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: liquid.acid(a)gmx.net
Entering certain areas in Portal or HL2 Ep2 lets the game slow down big time.
The slowdown is accompanied with these FIXMEs:
fixme:d3d_surface:surface_load_ds_location (0x1587a8) Not supported with fixed
up depth stencil
fixme:d3d:fixed_get_input Unsupported input stream
[usage=WINED3DDECLUSAGE_POSITION, usage_idx=1]
fixme:d3d:fixed_get_input Unsupported input stream
[usage=WINED3DDECLUSAGE_NORMAL, usage_idx=1]
I suspect this is triggering by the game trying to use vertex tweening.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18137
Summary: Checkpoint installer dies when running fwkern.exe
Product: Wine
Version: 1.1.19
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ashogunnamedmarcus(a)yahoo.com
Created an attachment (id=20593)
--> (http://bugs.winehq.org/attachment.cgi?id=20593)
Entire checkpoint install log file
Checkpoint VPN client does not successfully complete installation. I checked
out the install log, things seem to be going well until the installer attempts
to run 'fwkern.exe'. This results in errors like "Failed to INetCfg" and dumps.
I've attached the whole damn log which includes a few install attempts.
Thanks and let me know if I can be any help.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10382
Summary: Tribes 2: must double-tap for in game chat
Product: Wine
Version: 0.9.48.
Platform: Other
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: wine-directx-dinput
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: spock128(a)gmail.com
When in game, the chat keys must be pressed twice after the first use.
For example, I can press 'u' (global chat) once to bring up a text entry box to
say something in the global channel (correct operation). After that, I must
hit 'u' twice to bring up the text entry box. In-game console shows the error:
DInputDevice::syncKeyboardState - DIERR_INVALIDPARAM
Switching out of the game window and back will reset the condition - it works
for first use then must hit twice.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24480
Summary: File handles keep open after PowerPoint 2007 is closed
Product: Wine
Version: 1.3.1
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: m.duelli(a)web.de
When working with PowerPoint 2007 on files which are stored on a USB stick, you
cannot cleanly unmount the USB stick after closing PowerPoint since it
complains about open file handles.
Workaround:
You have to kill the wineserver such that all file handles are closed.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14764
Summary: MissionForce Cyberstorm demo crashes on startup
Product: Wine
Version: CVS/GIT
Platform: PC
URL: http://www.fileplanet.com/11494/10000/fileinfo/MissionFo
rce:-CyberStorm
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=15274)
--> (http://bugs.winehq.org/attachment.cgi?id=15274)
+relay,+seh,+tid
Crashes on startup. +relay,+seh,+tid attached
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11727
Summary: Mouse button events generated by a window's app are not
propagated to X server
Product: Wine
Version: 0.9.56.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: winex11.drv
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gideon.wine(a)gmail.com
Created an attachment (id=10969)
--> (http://bugs.winehq.org/attachment.cgi?id=10969)
Patch to send mouse button events to the X server
winex11.drv uses XWarpPointer to send mouse movements to the X server. Mouse
button events are not sent. If a pointing device device communicates directly
with a windows app running in wine, the user will be able to move the mouse
pointer, but button presses will only work on windows controlled by wine.
The attached patch adds calls to send mouse button events generated by a
windows application to the X server. The way this is done is similar to the way
it is done in the Synergy client - by using XTestFakeButtonEvent
(see http://synergy2.sourceforge.net/).
Requires libXtst.
This bug might also resolve bug 7032.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27655
Summary: Orbiter window disappears behind main orbiter window.
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kfreezen(a)gmail.com
On orbiter, if a window, such as the menu (F4), is opened, and then the cursor
is moved to the main window, the former window disappears behind the main
window.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27335
Summary: Microsoft Golf 98 crashes when you try to play the
game
Product: Wine
Version: 1.2-rc1
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: germany(a)backspace.bz
Microsoft Golf 98 starts up fine, but then crashes when you actually try to
start a game.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26547
Summary: Champions Online: IE game starter fails using multilib
binaries
Product: Wine
Version: 1.3.16
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: brianbourke75(a)gmail.com
Champions online requires IE to launch/patch their game. When attempting to
launch the game in a true 32 bit install it seems to work just fine. When
attempting to launch the game using a multilib install on a 64bit system, it
fails almost straight off.
Using WINEARCH=win32 or win64 makes no difference.
Using WINEDEBUG=+relay allows for the game to launch correct, thus indicating
to me that there is probably a thread timing issue since the relay messages
require a large time investment and the launcher takes much longer to run.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26158
Summary: Audio CD-ROM is lacking some integration into volume
management on MacOS
Product: Wine
Version: 1.3.13
Platform: x86
OS/Version: Mac OS X 10.5
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hoehle(a)users.sourceforge.net
MCICDA loops across all drives looking for one matching
(GetDriveTypeW(root) == DRIVE_CDROM)
but finds none on MacOS even when an audio CD-ROM is inserted.
Oddly, winecfg correctly displays "Audio CD" for e.g. drive D: in
auto-detection mode. However it is not until I force D: to type CD-ROM in
winecfg that GetDriveType() returns the expected type, granting access to
MCICDA.
Furthermore, I must hit "Apply" in winecfg and leave its window open for this
trick to work. Presumably otherwise the list is dynamically rebuilt by the
volume manager upon the next process start and the setting overwritten.
I believe this is sufficiently different from bug #20555 (A. pure audio vs.
mixed data+audio CD-ROM; B. /media/cdrom vs. cdrom0) on Linux to warrant its
own entry.
Reproduce using my MCI shell (bug #20232, comment #10)
wine wintest.exe mcishell
open cdaudio
will yield MCIERR_CANNOT_LOAD_DRIVER if there's no drive type match.
Leave the shell open, apply configuration change in winecfg, then it succeeds.
close cdaudio
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21654
Summary: Implement CLSID_DestinationList
Product: Wine
Version: 1.1.37
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: shell32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: madewokherd(a)gmail.com
Windows 7 introduced a new interface to customize the taskbar menu of an
application. Steam uses it.
We should consider writing a stub implementation.
http://msdn.microsoft.com/en-us/library/dd378402%28VS.85%29.aspx
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18052
Summary: Cannot install VMware Instrastructure Client 2.5 with VM
Update option
Product: Wine
Version: 1.1.19
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wine(a)doty.ru
1. Run installer (https://77.108.91.66/client/VMware-viclient.exe)
2. Check "Install VMware Instrastructure Update Service" option
3. Click Next, Next, Install
4. Error "The wizard was interrupted before VMware Infrastructure Client 2.5
could be completely install" appears and installer breaks.
After second try of same install, I get "The installation directory is not
writable. Please select another location or ajdust Access Control List." error.
Without "Install VMware Instrastructure Update Service" checked option all
everything happens ok.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.