http://bugs.winehq.org/show_bug.cgi?id=22924
Summary: Nokia Ovi Suite stalls at start-up
Product: Wine
Version: 1.2-rc2
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: extigyro(a)gmail.com
Now in RC2 Nokia Ovi Suite installs successfully (though a little bit slowly)
but when the app is started, it stalls at start-up.
And "NokiaMServer.ex" eats up all the CPU time (Intel Core 2 Duo T7200 - 2 x 2
GHz).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28445
Summary: Task bar animated icon resource leak
Product: Wine
Version: 1.3.28
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: sprog(a)online.ru
If any win32 application has an animated icon wine will exhaust both memory and
X server resources.
If you start a win32 application in Wine with an animated icon (like The Bat)
you will immediately notice an initial 6-7 times higher CPU usage by X server
(like 7-11% instead of 2-3), with time the processor usage would increase and
eventually, depending on memory, it will lock down the system.
I'm not sure if this is KDE or Wine problem.
KDE 4.6.5
amd64, gentoo
xorg 1.10.4
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28430
Summary: PKR.COM bug #1 (cursor offset)
Product: Wine
Version: 1.3.12
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hanzal.michal(a)gmail.com
Good afternoon,
I am using OpenSuse 11.4.
I installed pkr.com and 90% of buttons had active
part lower than their actuall position on screen.
Whole screen is also little shift to upside. All you can see in
attached file.
When I start with fullscreen mode, all is OK
I tried New version 1.3.28, and this stable version (1.3.12) and
problem was same.
Please try to find this BUG if it is possible, but I believe you :)
With best regards
Michal Hanzal
Paint Engineer
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27409
Summary: Can not type in persian
Product: Wine
Version: unspecified
Platform: All
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: m.ghadam(a)gmail.com
Created an attachment (id=35052)
--> (http://bugs.winehq.org/attachment.cgi?id=35052)
Wine debug log
It is not possible to type persian .
I have attached the debug log which is taken by :
WINEDEBUG=+x11drv,+key,+keyboard,+event wine notepad &>persian_kbd.log
I just switched keyboard to persian and try to typing , but nothing is shown.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23969
Summary: Delphi TDateTimePicker does not have day, month or
year selected when first tabbed into
Product: Wine
Version: 1.2
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: maya.mcleod(a)gmail.com
Delphi's date picker (TDateTimePicker) does not have day, month or year
selected when first tabbed into.
You need to press the right-arrow to select the day (or month, or year).
Confirmed with Delphi 2006, 2009, with and without windows themes enabled.
Might happen with no-Delphi apps as well, but unconfirmed.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21290
Summary: URU: path of the shell no longer alows window
managment.
Product: Wine
Version: 1.1.36
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: spammaster(a)madtracker.net
When starting URU path of the shell. The application window dissapears. The
process keeps running as I can hear the sound and music still playing.
This bug only occurs when I select both options: let window manager decode the
window and let window manager control the window.
If I select one of both the game still runs fine. Only with both options
selected, the crash occurs.
This is tested on a clean wineprefix and the bug has occured at wineversion
1.1.36
Everything runs great on version 1.1.35
Running on Nvidia driver 190.53
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18524
Summary: Management By Statistics System Crashes upon start
winevdm.exe encounters serious problem
Product: Wine
Version: 1.1.21
Platform: PC-x86-64
URL: http://www.mastertech.com
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P1
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: sasciame(a)yahoo.com
Wine crashes when I clicked on the program to run.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28897
Bug #: 28897
Summary: Disciples 2 err:module:attach_process_dlls "SHW32.dll"
failed to initialize, aborting
Product: Wine
Version: 1.3.30
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: anton.kochkov(a)gmail.com
Classification: Unclassified
[14:58| xvilka ~/.wine/drive_c/Disciples2_Gold]$ wine ScenEdit.exe
err:module:attach_process_dlls "SHW32.dll" failed to initialize, aborting
err:module:LdrInitializeThunk Main exe initialization for
L"C:\\Disciples2_Gold\\ScenEdit.exe" failed, status c0000142
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28818
Bug #: 28818
Summary: GetNetworkParams occasionally returns
ERROR_BUFFER_OVERFLOW (race condition?)
Product: Wine
Version: 1.3.30
Platform: x86
OS/Version: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: cdavis(a)mymail.mines.edu
Classification: Unclassified
A common pattern for functions returning variable-sized data is to call the
function twice: once to get the size of the data, and once again to actually
get the data. The GetNetworkParams() function in iphlpapi is one such function.
Occasionally on Mac, GetNetworkParams() will return ERROR_BUFFER_OVERFLOW the
second time, even with a buffer of the size returned from the first time. My
guess is that the size is changing in between calls. I'm not sure if this is a
bug or what--can this happen on Windows? Also, is this a Wine bug, or a bug in
the Mac version of the BIND9 resolver?
Apple says the BIND9 resolver API is not recommended, and that new programs
should use the API in <dns.h> instead. Should Wine be doing this?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23436
Summary: Indic language display - wrong character order,
missing glyphs
Product: Wine
Version: 1.2-rc5
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: DanielErikThomas(a)gmail.com
Created an attachment (id=29234)
--> (http://bugs.winehq.org/attachment.cgi?id=29234)
Notepad screenshot
Indic languages are not displaying correctly in wine. I have tried Hindi and
Bengali, and for both:
- Vowel order is not correct. Some vowels -- e.g. equivalents of 'e' and 'i'
-- are typed after the consonant, but should be displayed before it. Instead
they are displayed after (these are all L to R)
- Combined consonant glyphs are not displayed.
I have the same problem in Wine's Notepad, and several other Windows programs
running under wine. I am using ttf fonts that work fine in linux outside wine,
and under windows. I've also tried both the default ubuntu keyboards and a
separate scim-based input method (avro), with the same results.
(Running Ubuntu 10.04; Same display problems with Notepad, the Word, eSword.
MS Word 2007 crashes when I try using either input method.)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23040
Summary: USB Gamepad not working
Product: Wine
Version: 1.2-rc2
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-dinput
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: atomkarinca(a)gmail.com
I have two USB gamepads and I get the same error output from both. I am trying
to run PES 2010 with gamepad enabled. When I run the game with
WINEDEBUG=+joystick wine pes2010.exe
I get the following lines:
trace:joystick:JSTCK_GetDevCaps Driver: 0x020100, Name: USB Gamepad , #Axes: 6,
#Buttons: 10
warn:joystick:JSTCK_GetDevCaps Unknown axis 40(5). Skipped.
So, as I understand the gamepad is recognized but somehow an axis is preventing
me to use it. I tried to recalibrate the gamepad with jscal but to no avail. I
also tried adding a registry value to HKCU\Software\Wine\DirectInput but yet
again no improvement.
Any idea on how I can get this unknown axis to be recognized?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=20513
Summary: Family Tree Maker 2006 crashes when importing a GEDCOM
file
Product: Wine
Version: 1.1.32
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P5
Component: ole32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: neil.sheed(a)gmail.com
Created an attachment (id=24431)
--> (http://bugs.winehq.org/attachment.cgi?id=24431)
Trace log of error
At the end of the GEDCOM import process (File - Append/Merge - select GEDCOM
file). File is imported successfully ("There were no warnings or errors
generated during import.")
Application then tries to create a backup file - on clicking ok the application
displays a dialog "A serious internal error has occurred. Please quit and then
restart Family Tree Maker."
Terminal window shows:
fixme:storage:StgCreateDocfile Storage share mode not implemented.
fixme:storage:StorageImpl_Commit (0x216be0 1): stub
... repeated 4 times
fixme:storage:StorageImpl_Commit (0x1f3320 1): stub
... repeated once
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:htmlhelp:HTMLHelpW HH case HH_CLOSE_ALL not handled.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18144
Summary: Rainmeter skin backgrounds are not transparent (Kwin &
Compiz)
Product: Wine
Version: 1.1.19
Platform: Other
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: miketrml(a)gmail.com
Created an attachment (id=20607)
--> (http://bugs.winehq.org/attachment.cgi?id=20607)
Rainmeter's black background in a virtual window. The black border is also
evident on the desktop.
I have looked throughout the database to find one or two workable programs
similar to this bug. I will list them here within this bug report as no listed
bug specificly deals with Rainmeter's issue.
Rainmeter is a program which displays various GUI elements within Windows,
featuring system information neatly displayed in a varying array of skinned
elements, whether they be text, abstract graphic, anime, or otherwise.
The program installs itself with no issue. The skin loads given the nature and
workaround of bug 18142, a GDIPLUS-related issue in which Winetricks will
install.
The problem is presented upon actually having loaded a skin. The background
appears to be virtually black, and upon changing the program's transparency
from an option within Rainmeter, the black background also changes transparency
with the skin, allowing the wallpaper behind it to show through.
When initially clicking on the window, the black background goes transparent
for a half a second or so and then reprints the black background. Also, no
matter if you're using Compiz or Kwin under KDE 4.2.2, this is a problem
persisting in it's existance.
10091 is a similar bug to this, but this problem persists under Kwin as already
stated. Secondly, the bug also exists regardless whether or not Rainmeter is
loaded within a virtual window.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28131
Summary: CRASH
Product: Wine
Version: 1.3.0
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jayson_webster27(a)hotmail.com
Whenever i launch a .exe after a minute or so it says "
The program... has encountered a serious problem and needs to close. We are
sorry for any inconvenience.
__________________________________________________________________________________
This can be caused by a problem in the program or a deficiency in Wine. You may
want to check http://appdb.winehq.org for tips about running this application
If this problem is not present under windows and has not been reported yet,
you can report it at http://bugs.winehq.org"
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27493
Summary: Derive 6 (computer algebra system) hlp file errors
Product: Wine
Version: unspecified
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: Doug(a)Dougtelford.com
Created an attachment (id=35152)
--> (http://bugs.winehq.org/attachment.cgi?id=35152)
shows logs and output of processing hlp file on linux and windows xp
Derive6.hlp file is not processed correctly. Works fine on windows XP.
See attachment
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=20811
Summary: query.c:224 Test Failed: IDirect3DQuery9_GetData a 2nd
time on a ended query returned 00000001
Product: Wine
Version: 1.1.33
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: testcases
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: celticht32(a)aol.com
Looking at the wine test results for the following test:
query.c in the d3d9 tests directory...
hr = IDirect3DQuery9_GetData(pQuery, data,
IDirect3DQuery9_GetDataSize(pQuery), D3DGETDATA_FLUSH);
ok(hr == S_OK, "IDirect3DQuery9_GetData on a ended query returned %08x\n",
hr);
hr = IDirect3DQuery9_GetData(pQuery, data,
IDirect3DQuery9_GetDataSize(pQuery), D3DGETDATA_FLUSH);
ok(hr == S_OK, "IDirect3DQuery9_GetData a 2nd time on a ended query
returned %08x\n", hr);
the MSDK says the following :
IDirect3DQuery9::GetData
Polls a queried resource to get the query state or a query result. For more
information about queries, see Queries (Direct3D 9).
Return Values
The return type identifies the query state (see Queries (Direct3D 9)). The
method returns S_OK if the query data is
available and S_FALSE if it is not. These are considered successful return
values. If the method fails when
D3DGETDATA_FLUSH is used, the return value can be D3DERR_DEVICELOST.
The test fails with :
query.c:224: Test failed: IDirect3DQuery9_GetData a 2nd time on a ended query
returned 00000001
which is a S_FALSE (1) which just means the data is not available... which
according to the MSDN site is an ok value to return... and is a success.
Also reading the MSDN the D3DGETDATA_FLUSH is supposed to flush the query so
the value its returning is ok...
So If I am understanding the above code the first one should return a S_OK
saying that it flushed the query code.... Then the second call should return a
S_FALSE because the query has nothing in it.....
Stephan said in Dev list :
I guess its fine to accept this result then. I think the original motivation
behind these tests was that HL2 called GetData() more than once and this raised
GL errors - the query code now filters such calls out to prevent calling bad GL
calls. My guess is that its ok to modify the test to accept both results. Ie,
ok(hr == S_OK | hr == S_FALSE, "...");
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16433
Summary: impossible to ignore a runtime assertion
Product: Wine
Version: 1.0.1
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mauro(a)linux.ca
I have a program that after ignoring an assertion works perfectly on windows...
In wine it could probably be the same but the assertion dialog misses the
ignore button having only OK and Cancel
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14899
Summary: Quicken One Step Update fails - 'com error'
Product: Wine
Version: 1.0.0
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: headofbucket(a)gmail.com
Created an attachment (id=15470)
--> (http://bugs.winehq.org/attachment.cgi?id=15470)
Console output for com error.
Quicken 2008 Update 7 crashes when attempting to do one step update with a
message 'com error'.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28805
Bug #: 28805
Summary: Microsoft Flight Simulator FS9 crash
Product: Wine
Version: 1.3.30
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ahso47(a)yahoo.com
Classification: Unclassified
Microsoft Flight Simulator 2004 / 9 crashes/exits at startup
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28211
Summary: HardWare identification: "Exception: Read error in
Processes Info"
Product: Wine
Version: 1.3.27
Platform: x86
OS/Version: Mac OS X
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jeremy.d.bernstein(a)googlemail.com
When launching this software
(http://chessok.com/download/Training/PeshkaSetup.exe) using the most recent
version of Wine on OSX (WS7Wine1.3.27 in my case, but it occurs with other
flavors, including CodeWeavers, and has occurred with every Wine version I've
tried since 1.2.x), I get an error dialog "HardWare identification: "Exception:
Read error in Processes Info".
I cannot be sure if the functionality of the software is compromised in any
way: it appears to work properly, but I do occasionally see errors when
dragging objects out of the application frame (not easily reproducible, and no
idea if it's related).
Sorry for the bad bug report. Hopefully someone who is more Wine-savvy can
reproduce the issue and figure out the guilty component.
Thanks, Jeremy
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24915
Summary: Lord or the Rings Installer Hangs on Mac
Product: Wine
Version: 1.3.5
Platform: x86
OS/Version: Mac OS X 10.6
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: happyslaps(a)gmail.com
The installer for Lord of the Rings Online hangs on mac with this error
Log file is being written to C:\users\ayers\Temp\lotrohigh.exe.log
err:seh:setup_exception_record stack overflow 1760 bytes in thread 0026 eip
7bc30d3c esp 05470c50 stack 0x5470000-0x5471000-0x5670000
This does not occur on with wine 1.3.5 on Ubuntu 10.10.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17560
Summary: Mercury Mail SSL/STARTTLS does not work
Product: Wine
Version: 1.1.16
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: admin(a)linux-tstephenson.com
When trying to make a connection to the Mercury v4.62 server via POP3, SMTP or
IMAP4 the STARTTLS function error out with the following error:
10:56:18.275: Connection from 127.0.0.1, Sat Feb 28 10:56:18 2009<lf>
10:56:18.336: << * OK linux-tstephenson.com IMAP4rev1 Mercury/32 v4.62 server
ready.<cr><lf>
10:56:18.337: >> A1 CAPABILITY<cr><lf>
10:56:18.338: << * CAPABILITY IMAP4rev1 STARTTLS AUTH=PLAIN X-MERCURY-1<cr><lf>
10:56:18.338: << A1 OK CAPABILITY complete.<cr><lf>
10:56:18.339: >> A2 STARTTLS<cr><lf>
10:56:18.339: << A2 OK Begin SSL/TLS negotiation now.<cr><lf>
10:56:18.340: 20: Error -3 creating CryptLib session.
10:56:18.345: --- Connection closed normally at Sat Feb 28 10:56:18 2009. ---
10:56:18.345:
This is very similar to the Pegasus Mail bug 14797 since both are using the
same crypto library.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13608
Summary: Test tool on windows makes XP completely reboot
Product: Wine
Version: unspecified
Platform: PC-x86-64
URL: http://test.winehq.com/data/0b6acfbce7b0bf2aedb5176bfa95
9edc3f0d74f6/
OS/Version: Windows XP
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: saintk(a)specialattack.net
CC: saintk(a)specialattack.net
Running this test;
Main summary for build 0b6acfbce7b0bf2aedb5176bfa959edc3f0d74f6
Results in a full system reboot at my end.
This is what i can capture from my windows event log;
Faulting application d3d9_test.exe, version 0.0.0.0, faulting module d3d9.dll,
version 5.3.3790.3959, fault address 0x000a488a.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Any additional info;
OS: Windows XP x64 SP2
Hardware used;
Asus Maximus Formula
Unknown 350GB Sata disk
Asus EAX1950XTX PCI-E
4GB DDR2 Geil RAM @ 800MHz
Everything is clocked default (no overclocking applied). System runs stable
during stability tests both on the GPU and CPU.
If any more information or testing is required don't hessitate to contact me.
Only 'downside' i don't know anything about debugging of any kind. Neither am I
an active wine user. I just ran the test because i do support the idea behind
the project.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28845
Bug #: 28845
Summary: Panzer Corps: Unable to get full screen
Product: Wine
Version: 1.3.31
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: a8391912(a)nepwk.com
Classification: Unclassified
On Ubuntu 11.10 64 bit the game is unable to get to full screen. The unity
sidebar and the top panel are still visible. As a result, the game graphics are
shifted to the right and cut off on the right hand side of the screen.
Screenshot attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28631
Bug #: 28631
Summary: Color Efex Pro 4 - wgl:X11DRV_wglShareLists
Product: Wine
Version: 1.3.28
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: numerus(a)gmx.com
Classification: Unclassified
Created attachment 36793
--> http://bugs.winehq.org/attachment.cgi?id=36793
Command line output
I'm trying to run Color Efex Pro 4. The installation process ends without
problems, but the application hangs up with the following error:
err:wgl:X11DRV_wglShareLists Could not share display lists, one of the contexts
has been current already !
I'm using it as a Photoshop plugin, but it can run standalone. The application
can be downloaded from here:
http://www.niksoftware.com/colorefexpro/usa/index.php?view=intro/main.shtml
I've attached the command line output.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.