http://bugs.winehq.org/show_bug.cgi?id=14536
Summary: FLSynthmaker crashes FL Studio
Product: Wine
Version: CVS/GIT
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: billstei(a)hbci.com
Inside the FL Studio program ( demo here:
http://www.flstudio.com/documents/download.html ) go to menu Channels-->Add
one-->Synthmaker and FL Studio crashes with the following error message (using
WINEDEBUG+=gdiplus):
trace:gdiplus:GdipCreateBitmapFromScan0 32767 32767 0 925707 (nil) 0x32bf18
err:bitmap:X11DRV_DIB_SetImageBits Out of memory!
X Error of failed request: BadAlloc (insufficient resources for operation)
Major opcode of failed request: 53 (X_CreatePixmap)
Serial number of failed request: 30719
Current serial number in output stream: 30722
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=20805
Summary: FL Studio and MIDI Controller
Product: Wine
Version: 1.1.32
Platform: PC
URL: http://flstudio.image-line.com/
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: benjee.d(a)gmail.com
I have installed FL studio 9.
The problem is connecting an ALESIS PHOTON 25 ( midi controller by USB port )
no message is showed, but FL studio seems to not receiving midi signal, and is
impossible to link the knobs and buttons, with this program interface.
FL stduio includes one configuration tool to find midi devices, but nothing
happens using it.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23859
Summary: FL Studio plugins add semicolon to saved file names
Product: Wine
Version: 1.2
Platform: x86
URL: http://www.flstudio.com
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: billstei(a)hbci.com
In the program FL Studio (9.1) some of the synth plugins add an extraneous
suffix (semicolon) to the end of the file name. Example: Add the Toxic
Biohazard plugin using menu CHANNELS->Add one->Toxic Biohazard. Now save a
preset using the synth GUI (slightly right of top center on the GUI):
OPTIONS->Save Program, which calls up a standard Windows File Save dialog
window. If I use the name "MyPreset", the extension ".tbio" is added with an
additional semicolon, so that the resulting file name is now "MyPreset.tbio;".
This is probably a bug in Toxic Biohazard, given that not all FL Studio plugins
(e.g. Sytrus) exhibit this behaviour, but this bad behaviour is probably
masked/corrected by Windows, and if so, then perhaps Wine should also
mask/correct it.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29611
Bug #: 29611
Summary: FL Studio 10 is invisible without "emulate virtual
desktop"
Product: Wine
Version: 1.3.37
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: realnc(a)gmail.com
Classification: Unclassified
When running FL Studio (version 10), the main application window is invisible.
To clarify: it's not that an empty window appears or something like that.
Instead, nothing appears except the initial pop-up dialog of FL Studio that
informs you that this is a demo. The only thing that's visible is the task
manager entry in KDE's task manager panel.
When enabling "Emulate a virtual desktop" in winecfg, then the application
shows up correctly.
I'm using Wine 1.3.37 on Gentoo Linux AMD64, using the Radeon graphics driver
(Gallium3D with KMS, Mesa 7.11.2 and also tried latest Git version.)
When trying to reproduce, you can download FL Studio from here:
http://flstudio.image-line.com/documents/download.html
It's a free download (224MB) and you don't need to sign-up or anything.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30132
Bug #: 30132
Summary: Not work FL Studio in latest wine
Product: Wine
Version: 1.4-rc6
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mikhail.v.gavrilov(a)gmail.com
Classification: Unclassified
Then I launch FL Studio throw exception in console:
mikhail@p5k:~$ .wine/drive_c/Program\ Files/Image-Line/FL\ Studio\ 10/FL.exe
err:seh:setup_exception_record stack overflow 904 bytes in thread 0009 eip
7ef93dce esp 00230fa8 stack 0x230000-0x231000-0x330000
FL Studio you can get here:
http://demodownload.image-line.com/flstudio/flstudio_10.0.9.exe
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12279
Summary: wine not accepting regcode of FL Studio 8
Product: Wine
Version: 0.9.58.
Platform: Other
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dianat100(a)yahoo.com
Wine doesn't accept the regcode of FL Studio 8 and the program appears in demo
mode. It does, however accept FL Studio 7 regcode. Regcodes work fine under
Windows XP.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28266
Summary: Wise Registry Cleaner: Error message at startup
Product: Wine
Version: 1.3.27
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
Created an attachment (id=36217)
--> (http://bugs.winehq.org/attachment.cgi?id=36217)
Error message
Steps to reproduce:
1) remove ~/.wine
2) install Wise Registry Cleaner
3) wine WiseRegCleaner.exe
Behaviour:
Error message (See attachment).
Expected behaviour:
No error message.
Terminal output:
fixme:resource:GetGuiResources (0xd4,0): stub
Additional info:
Access violation at address 00456D49 in module 'WiseRegCleaner.exe'. Read of
address 000006BD.
Workaround:
WINEDEBUG=+relay
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18637
Summary: Nokia Map Loader 2.0 (.NET 3.0 app) needs
DisableProcessWindowsGhosting stub
Product: Wine
Version: 1.1.22
Platform: Other
URL: http://europe.nokia.com/get-support-and-software/produ
ct-support/maps-support/compatibility-and-downloads
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: user32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
as it says ...
--- snip ---
System.EntryPointNotFoundException: Unable to find an entry point named
'DisableProcessWindowsGhosting' in DLL 'user32.dll'.
at Lizard.Windows.Native.NativeMethods.DisableProcessWindowsGhosting()
at Lizard.Windows.NonClientBaseForm.OnHandleCreated(EventArgs e)
at System.Windows.Forms.Control.WmCreate(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmCreate(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at Lizard.Windows.NonClientBaseForm.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr
wparam, IntPtr lparam)
--- snip ---
A simple stub is enough.
See: http://msdn.microsoft.com/en-us/library/ms648415.aspx
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30041
Bug #: 30041
Summary: npptools.dll is needed by ishare_user.exe of Dr.com
Product: Wine
Version: 1.4-rc5
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fracting(a)gmail.com
Classification: Unclassified
1. Download Dr.comhttp://www.cqjtu.edu.cn/software/Dr.COM%20Client-%E9%87%8D%E5%BA%86%E4%BA%A…
2. Install drcom.exe
3. install mfc42 with winetricks
4. start ishare_user.exe
$ wine ishare_user.exe
err:module:import_dll Library NPPTools.dll (which is needed by
L"C:\\windows\\system32\\packet.dll") not found
err:module:import_dll Library packet.dll (which is needed by L"C:\\Program
Files\\Dr.COM \5bbd\5e26\8ba4\8bc1\5ba2\6237\7aef\\ishare_user.exe") not found
err:module:LdrInitializeThunk Main exe initialization for L"C:\\Program
Files\\Dr.COM \5bbd\5e26\8ba4\8bc1\5ba2\6237\7aef\\ishare_user.exe" failed,
status c0000135
Dr.com is important for some university students, see also
http://bugs.winehq.org/show_bug.cgi?id=29460#c2
I've tried native npptools.dll, it may work but I'm not sure since I have no
network environment for testing.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29083
Bug #: 29083
Summary: Logitech Harmony Remote Fails to install
Product: Wine
Version: 1.3.32
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: cycoone(a)hotmail.com
Classification: Unclassified
Created attachment 37478
--> http://bugs.winehq.org/attachment.cgi?id=37478
Debugger output
When trying to run the Logitech Harmony Remote Software Wine immediately brings
up a crash dialog and the following in the console:
fixme:storage:create_storagefile Storage share mode not implemented.
WARNING: no socket to connect to
wine: Call from 0x7b83a192 to unimplemented function
apphelp.dll.ApphelpCheckInstallShieldPackage, aborting
wine: Unimplemented function apphelp.dll.ApphelpCheckInstallShieldPackage
called at address 0x7b83a192 (thread 0009), starting debugger...
Debugger output attached.
LogitechHarmonySoftware.exe is available at www.myharmony.com. OS detection is
used, I downloaded it with Firefox 8 in Wine. This machine is dual boot and I
was able to run the program without issue in Windows XP.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19223
Summary: null Object reference during Database object expansion
(MS SQL SMSE)
Product: Wine
Version: 1.1.25
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: m27315(a)gmail.com
Created an attachment (id=22225)
--> (http://bugs.winehq.org/attachment.cgi?id=22225)
Wine log for SSMSEE
Immediately after launching Microsoft's SQL Server Management Studio Express,
an "Object Explorer" pane is visible on the left to explore the connected SQL
server. Double-clicking on the "Databases" node to expand it produces the
following error message (see below)...
The databases can be acquired using the "Summary" window, and then the "Object
Explorer" pane can be synchronized to the "Summary" window. Although a
workaround exists, it is clumsy. Plus, a method so basic as expanding the
connected databases should not create such an error.
Incidentally, the error message is empty at first, and the message can only be
viewed by clicking on the "Show technical details" button in the error log...
===================================
Object reference not set to an instance of an object.
(Microsoft.SqlServer.Express.ObjectExplorer)
------------------------------
Program Location:
at
Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.SystemObjectAccessHandler.get_HideSystemObjects()
at
Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.SystemObjectAccessHandler.Visible(INodeInformation
source)
at
Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.IsNodeVisible(NavigableItem
item)
at
Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.BuildStaticItem(IList
nodes, INodeInformation source, INavigableItem sourceItem)
at
Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.Build(INodeInformation
source, INavigableItem sourceItem, IFilterProvider filter)
at
Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.GetChildren()
at
Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ExplorerHierarchyNode.BuildChildren()
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30069
Bug #: 30069
Summary: MSDE2000A fails due to NtCreatePort being a stub
Product: Wine
Version: 1.4-rc5
Platform: x86
URL: http://www.microsoft.com/download/en/details.aspx?id=2
2661
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: djelinski1(a)gmail.com
Classification: Unclassified
Created attachment 39177
--> http://bugs.winehq.org/attachment.cgi?id=39177
log of setup.exe in wine 1.4-rc5
To reproduce:
Download and run the MSDE installer MSDE2000A.EXE from
http://www.microsoft.com/download/en/details.aspx?id=22661
This will unpack to directory c:\MSDERelA.
Go to that directory, then run
setup.exe SAPWD=Hello
It will install MSSQLServer service and attempt to start it. The service will
fail to start, and the installer will subsequently (after ca.2 minutes) remove
all installed files.
I managed to reproduce it faster via interrupting the installer before it has a
chance to remove the service - after that starting any wine application
triggers the bug.
NtCreatePort is a part of undocumented Microsoft API called LPC. Some attempts
at documenting it can be found via google, e.g.:
http://www.zezula.net/en/prog/lpc.htmlhttp://blogs.msdn.com/b/ntdebugging/archive/2007/07/26/lpc-local-procedure-…
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17785
Summary: MSDE fails to register its service(i think).
Product: Wine
Version: unspecified
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: msi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: nicklas(a)ws.se
Created an attachment (id=20011)
--> (http://bugs.winehq.org/attachment.cgi?id=20011)
A log of an attempt to run "wine setup.exe SAPWD=XXXXX" after successfully
decompressing the installation files.
I am quite new to wine and especially it's logging style, but it seems to me
that it fails to register its service. However i might obviously be completely
wrong.
The error(s) occurs while running "wine setup.exe SAPWD=XXXXX" after
successfully decompressing the installation files into C:\InstDir\ .
I have also tried with the BLANKSAPWD=1 switch.
I have no idea of the severity of this bug, however(being a newcomer) I set i
to normal, even though I'd suspect a lot of server applications would run into
similar issues, which would constitute a "wide range" and a "major" severity.
I am also not sure of which component to assign it to.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16592
Summary: Ford service manual viewer fails to detect CD (fix
attached)
Product: Wine
Version: unspecified
Platform: PC
OS/Version: FreeBSD
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: kernel32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: p-wine-bugs(a)ziemba.us
Created an attachment (id=18120)
--> (http://bugs.winehq.org/attachment.cgi?id=18120)
patch to handle null-rootpath equivalent in GetVolumeInformationW
wine-1.1.10
I installed the Ford 1993-1994 truck service manual viewer from CD. The viewer
application requires that the CD be present in a drive before it will show
service data.
The viewer application c:/FORD/PUBS/programs/VIEW16.EXE complains that there is
no CD present, even though there is. (yes, links for d: and d:: were made
correctly in .wine/dosdevices).
It turns out that the application calls GetVolumeInformationW with a "root"
argument of "\\:". In this case, GetCurrentDirectoryW returns the desired root
path, but since root is not null, the code in GetVolumeInformationW uses "\\"
as the drive letter instead (and fails).
Patching GetVolumeInformationW to treat root == "\\:" the same as the null case
results in the application successfully detecting the CD and operating
properly.
Documentation of GetVolumeInformationW on MSDN seems to indicate that there is
a broader range of possible formats for the root parameter than the wine
implementation currently handles, so perhaps a more extensive fix is needed for
the general case.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16567
Summary: moving mouse outside the wine virtual desktop causes
crash in FastBltNoTrans()
Product: Wine
Version: 1.0.1
Platform: PC
OS/Version: Windows XP
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: stephanecharette(a)gmail.com
Installed the game "Nancy Drew: Stay Tuned For Danger". Installation and game
start seems to work well. But the mouse icon is customized for the game, and
changes depending on whether there is an object under the mouse with which you
can interact.
If at any point during the game the mouse is moved outside the wine virtual
dekstop, the game immediately crashes with the following Windows dialog window:
-----------------------
FastBltNoTrans() - err ret = 88760096, pDescription = Dirty Rect Fast Blt,
rSrcRect: t=158, b=198, l=-5, r=25, dwDestX=-5, dwDestY=158 - DDERR_INVALIDRECT
- Rectangle provided was invalid.
-----------------------
I added it to AppDB here:
http://appdb.winehq.org/objectManager.php?sClass=version&iId=14880
I also have an earlier forum posting here with several other details:
http://forum.winehq.org/viewtopic.php?t=3190
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23537
Summary: Notepad in Hebrew shows some squares instead of
characters
Product: Wine
Version: 1.2-rc6
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: Paul.Vriens.Wine(a)gmail.com
Created an attachment (id=29391)
--> (http://bugs.winehq.org/attachment.cgi?id=29391)
Screenshot showing the squares
We now have a Hebrew translation of notepad. The goal was to have at least one
translation in so we can see what bugs we currently have with respect to Hebrew
(and Arabic for that matter).
The screenshot shows some squares where it should show Hebrew text.
I have no idea where to look yet. The title bar seems fine but the text in the
dialog isn't.
Some of the other dialogs also shows squares but I guess it boils down to the
same bug.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10922
Summary: JDK 6 offline installer fails to create
jdk1.6.0_03\jre\bin\msvcr71.dll, puts up error dialog
Product: Wine
Version: CVS/GIT
Platform: Other
URL: http://java.sun.com
OS/Version: other
Status: NEW
Keywords: download, Installer
Severity: enhancement
Priority: P2
Component: wine-msi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
The JDK 6 offline installer, jdk-6u3-windows-i586-p.exe,
puts up an error dialog
"Error loading: C:\\Program
Files\\Java\\jdk1.6.0_03\\jre\\bin\\client\\jvm.dll"
+file,+msi shows
trace:file:CreateFileW L"c:\\Program
Files\\Java\\jdk1.6.0_03\\jre\\bin\\msvcr71.dll" GENERIC_WRITE FILE_SHARE_READ
FILE_SHARE_WRITE creation 1 attributes 0x20
...
warn:file:CreateFileW Unable to create file L"c:\\Program
Files\\Java\\jdk1.6.0_03\\jre\\bin\\msvcr71.dll" (status c000003a)
...
err:msi:ITERATE_DuplicateFiles Failed to copy file L"c:\\Program Files\\Common
Files\\Java\\Update\\Base
Images\\jdk1.6.0.b105\\patch-jdk1.6.0_03.b05\\msvcr71.dll" -> L"c:\\Program
Files\\Java\\jdk1.6.0_03\\jre\\bin\\", last error 3
...
trace:file:CreateDirectoryW L"jre/bin"
...
trace:msi:HANDLE_CustomType34 executing exe L"c:\\Program
Files\\Java\\jdk1.6.0_03\\\\jre\\bin\\javaw.exe -Xshare:dump"
...
err:module:import_dll Library MSVCR71.dll (which is needed by L"C:\\Program
Files\\Java\\jdk1.6.0_03\\jre\\bin\\client\\jvm.dll") not found
Seems like that CreateDirectory should have come before it tried
to put a file in that directory?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27675
Summary: iTunes 10.3.1 can't play tutorial videos
Product: Wine
Version: 1.3.23
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
iTunes 10.3.1, installed in a clean wineprefix, crashes with a null pointer
read when you do
Help / iTunes Tutorials and click Play.
There's no really useful backtrace.
Setting win7 mode keeps it from crashing, and
it then puts up a generic-looking player with
fast forward, play, a position indicator, etc.,
but nothing happens when you press play. (Pressing
fast-forward puts up a 2x indicator, so the gui isn't dead,
it's the innards that are busted.)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26948
Summary: iTunes 10.2.2.12: Do not open
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ska_tropro(a)hotmail.com
When attempting to open the "iTunes" I get the following message:
"Apple Application Support was not found.
Apple Application Support is required to run iTunes. Please uninstall iTunes,
then install iTunes again.
Error 2 (Windows error 2)"
I've tried to uninstall, but does not occur, instead of that (probably)
reinstall the program. Even so, you still receive this message every time I try
to open the program.
I have Ubuntu 10.10, Wine 1.3.18 and the latest version of iTunes (v
10.2.2.12).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26927
Summary: iTunes store fail.
Product: WineHQ Bugzilla
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: bugzilla-unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: soulmalia(a)msn.com
The homepage of the iTunes Store goes black, making it impossible a normal
navigation in the apps, movies and books.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19652
Summary: iTunes becomes unresponsive while navigating music
store
Product: Wine
Version: 1.1.27
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: pieter.ideler(a)gmail.com
When you navigate to albums and pages on the iTunes Music Store in iTunes,
iTunes becomes unresponsive from time to time. (it is grayed out in Ubuntu)
Later on it becomes responsive again. This happens between almost every page
you navigate to.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10803
Summary: iTunes 7.3 no longer functions after upgrading Wine to
0.9.51
Product: Wine
Version: 0.9.51.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: wine-misc
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: linux(a)xstylus.com
In Wine versions 0.9.50 and prior, iTunes 7.3 functions. However, when
upgrading to 0.9.51, iTunes 7.3 will no longer function.
A fresh installation of Wine 0.9.51 was installed on my machine, and then
itunes 7.3 installed. iTunes 7.3 still would not run. Reverting back to 0.9.50
would not solve the problem either.
I was only able to solve the problem by reverting to 0.9.50 AND purging my
.wine folder.
Instructions for installing Wine 7.3 can be found at:
http://wine-review.blogspot.com/2007/10/itunes-73-on-linux-with-wine.html
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24073
Summary: iTunes 9.0.0.70 crashes on first run
Product: Wine
Version: 1.3.1
Platform: x86
URL: http://www.oldapps.com/itunes.php?old_itunes=48?downlo
ad
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: rusivi1(a)gmail.com
Created an attachment (id=30267)
--> (http://bugs.winehq.org/attachment.cgi?id=30267)
wine1.3.1: wine C:\\Program\ Files\\iTunes\\iTunes.exe >>log.txt 2&>1
Compiled newest dev wine from source (1.3.1), performed iTunes install with
defaults accepted except:
+ Unclicked "Use iTunes as the default player for audio files"
+ Unclicked "Automatically update iTunes and other Apple software"
+"AutoRun is turned off. iTunes won't be able to recognize when a CD is
inserted or ejected until your computer's AutoRun setting is turned on. Do you
want iTunes to turn on AutoRun for you?" No
Upon seemingly successful install, ran for first time:
+ Unclicked "Add MP3 and AAC files"
+ Choose "Yes, keep my iTunes Media Folder organized"
+ Dialog box noting, "Warning! iTunes was not properly installed. If you wish
to import or burn CDs, you need to reinstall iTunes."
The second the iTunes GUI popped up, I got a dialog box noting how "The program
iTunes.exe has encountered a serious problem and needs to close. We are sorry
for the inconvenience. This can be caused by a program..."
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23609
Summary: iTunes 9.2 GUI bricks when opened with wine-1.2-rc7,
Ubuntu 10.04
Product: Wine
Version: 1.2-rc7
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: rusivi1(a)gmail.com
Created an attachment (id=29530)
--> (http://bugs.winehq.org/attachment.cgi?id=29530)
iTunes GUI bricked
After installing a plain vanilla wine-1.2-rc7 from source, no winetricks,
downloaded and installed iTunes 9.2 from http://www.apple.com/itunes/download/
The installer ran seemingly successfully.
Open iTunes via desktop GUI icon, iTunes main screen pops up but is bricked,
nothing can be clicked and the window cannot be moved.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22177
Summary: Standalone version of DivX fails to install
Product: Wine
Version: 1.1.41
Platform: x86
URL: http://download.divx.com/divx/standalone/DivXInstaller
.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
Created an attachment (id=27057)
--> (http://bugs.winehq.org/attachment.cgi?id=27057)
Terminal output on Wine 1.1.41
Steps to reroduce:
1) remove ~/.wine
2) wine DivXInstaller.exe
3) accept licence and press next
4) get Wine error
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12071
Summary: MSI SQL joins on tables with many rows are extremely
slow
Product: Wine
Version: 0.9.57.
Platform: PC
OS/Version: Linux
Status: NEW
Severity: enhancement
Priority: P2
Component: msi
AssignedTo: truiken(a)gmail.com
ReportedBy: truiken(a)gmail.com
CC: ead1234(a)hotmail.com
With the current implementation of MSI SQL joins, we perform a Cartesian
product on the tables joined together. In the case where there is no WHERE
clause, this is the correct output, but if there is a WHERE clause, we still
perform the Cartesian product and then filter on the WHERE clause. Though it's
uncommon, there are a few installers (Visual Studio, Nero Express 7) that join
tables with thousands of rows. For example, say we have tables A, B, and C
s.t.
colA colB colC
----- ----- -----
1 1 1
2 2 2
... ... ...
1000 1000 1000
and we have the query
SELECT * FROM A, B, C WHERE `colA`=1 AND `colB`=1 AND `colC`=1
then the current implementation will create a new table with those columns
containing 1000*1000*1000=1 billion rows. Then we check each of the 1 billion
rows for any matches. There are several algorithms for optimizing joins:
http://en.wikipedia.org/wiki/Join_(SQL)#Join_algorithms
The solution I'll be working on is the merge join. This solution parses the
WHERE clause, starting with the two tables that the columns of the clause
belong to (colA -> A, colB -> B, etc) and joins those together, making sure to
eliminate rows based on the WHERE clause. Then the next table in the clause is
merged into the previously created table, eliminating rows. This continues
until there are no tables left. One optimization of this solution is to start
with parts of the WHERE clause that compare against literals. For example, the
query:
SELECT * FROM A, B, C WHERE `colA` = `colB` AND `colB` = 1 AND `colC` = 1
We'd start with "`colB` = 1" since the comparison is against a literal. We
perform 1000 comparisons on the rows of table B (count = 1000). The resulting
table is:
colB
----
1
then we do the same for table C (count = 1000), and the merged table is:
colB colC
---- ----
1 1
next we merge this table with table A:
colA colB colC
---- ---- ----
1 1 1
2 1 1
... ... ...
1000 1 1
and we search through this table for the condition `colA` = `colB` (count =
1000). So we've reduced billions of comparisons to 3000.
Unfortunately, the way our SQL engine is implemented, this will not be an easy
task.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26010
Summary: NI_Multisim won't install
Product: Wine
Version: 1.3.9
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: msi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: business.kid(a)gmail.com
http://www.ni.com/multisim/
I have given this a garbage rating and the page says to file a bug, so here
goes.
You register, and it gives you a downloader. Running the downloader, it slowly
downloads 464mb and writes a file of length 0 bytes :-//. So I used m$, which
is in the house, to download, and tried installing. I have a user set up just
for this, so I can wipe, hack, etc without upsetting anything.
After previous failed attempts I read errors and ran
winetricks gecko corefonts dotnet20sp2 vcrun6sp6 and stuck in dlls as native,
but that didn't help
It seems to want to do these steps
1. Unzip to C:\National Instruments Download - with coaxing it succeeds.
msiexec.exe & setup.exe each consume 49.x% of cpu. msiexec.exe rises to 99% if
keyboard input is wanted. msiexec then took off and grabbed the cpu with no
keyboard input wanted, so I killed it and setup moved on.
2. Next step is to take my name, license number (I used the trial version
option) and setup.exe grabs the cpu until it bombs. It actually works, but I
gather some threads are idle or have crashed, and idle seems to grab full cpu.
It spews msi errors - sampled below
fixme:msi:MsiGetFeatureValidStatesW 1 L"Core.MIFMUI" 0xfce320 stub returning 8
fixme:volume:GetVolumePathNameW (L"C:\\Program Files\\", 0x865818, 19), stub!
fixme:sxs:cache_QueryAssemblyInfo 0x2233470, 0x00000001, L"Microsoft.VC80.CRT,
version=8.0.50727.4053, publicKeyToken=1fc8b3b9a1e18e3b,
processorArchitecture=x86", 0x20fe1d8
fixme:msi:msi_unimplemented_action_stub MsiUnpublishAssemblies -> 10 ignored
L"MsiAssembly" table values
err:msi:ITERATE_Actions Execution halted, action
L"DD_CA_ComregEnterpriseServicesRB_X86.3643236F_FC70_11D3_A536_0090278A1BB8"
returned 1603
fixme:msi:MsiGetMode unimplemented run mode: 0
fixme:advapi:SetNamedSecurityInfoW L"[AAAAAA.LV.NIEF900]\\" 1 4 (nil) (nil)
0x2267efc (nil)
The output onscreen is "Installing .NET 2.0" (already installed) It's step 2 of
6 on the Elvis install, and step 5 of 33 on the full multisim install. After
more msi errors than I considered possible, it craps out executing invalid
instructions on an seh error.
if left running for several hours, it will make C:\National Instruments fill
that with about 500 Megs. It does install a Program\ Filed/blah/blah/Shared
directory with 150 Megs of 8--megs - 1 gig expected.
I have this user here. Tell me what debug trace you'd like and I'll run it.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10314
Summary: Switched On Schoolhouse 2000 fails to start up
Product: Wine
Version: CVS/GIT
Platform: Other
URL: http://www.familychristianacademy.com/SOStest.html
OS/Version: other
Status: NEW
Keywords: download
Severity: enhancement
Priority: P2
Component: wine-misc
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
While looking at bug 10313, I went looking for a
freely downloadable version of Switched-on Schoolhouse.
The only thing I found so far was a free downloadable placement test
for a school which seems to have been
made with Switched On Schoolhouse 2000.
When you run it, it locks up your X session, and you have
to do alt-control-backspace to shut down the X server
to regain control.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25343
Summary: mstsc fails when using rdp 7 client protocol
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: rgilland1966(a)gmail.com
mstsc fails when using rdp 7 client protocol
error is critical failure
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15270
Summary: Newest MapSource version (6.14.1) doesn't run anymore
with wine 1.1.4
Product: Wine
Version: 1.1.4
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: sbuehne(a)web.de
Created an attachment (id=16066)
--> (http://bugs.winehq.org/attachment.cgi?id=16066)
wine error during startup of mapsource
I could run successfully mapsource version 6.11 inlcuding all functions with
wine version 1.1.4 on openSuse 11.0
After applying an upgrade to the software mapsource, wine crashes during
program start with the error message:
...
wine: Unhandled page fault on write access to 0x003c1000 at address 0x9863ab
(thread 0009), starting debugger...
Unhandled exception: page fault on write access to 0x003c1000 in 32-bit code
(0x009863ab).
Register dump:
CS:0073 SS:007b DS:007b ES:007b FS:0033 GS:003b
EIP:009863ab ESP:0033e0b8 EBP:0033e0c0 EFLAGS:00010202( - 00 - -RI1)
EAX:003c0000 EBX:011d0d70 ECX:01ffffce EDX:00000000
ESI:011d1d70 EDI:003c1000
..
I have created a trace file for this error with the command:
echo quit | WINEDEBUG=+relay wine MapSource.exe >& filename.out;
and tailed the last 1000 lines to the attached log file, inlcuding the error
message.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29212
Bug #: 29212
Summary: Pegasus Mail v. 4.62 build 191 generates msg "Invalid
variant type" & "Invalid variant operation"
Product: Wine
Version: 1.3.33
Platform: x86
URL: http://download-us.pmail.com/w32-462.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mccarthy(a)volny.cz
Classification: Unclassified
Created attachment 37716
--> http://bugs.winehq.org/attachment.cgi?id=37716
debug log
wine 1.3.33
Pegasus Mail: v4.62 build 191
IERendered: 2.4.5.18 disabled
Upon start up, Pmail generates two messages: Invalid variant type and Invalid
variant operation
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18330
Summary: MapSource won't recognize Garmin Edge 705 via
MassStorage
Product: Wine
Version: 1.1.20
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: Erbureth(a)seznam.cz
Created an attachment (id=20872)
--> (http://bugs.winehq.org/attachment.cgi?id=20872)
Full log from MapSource 6.13.5 in wine 1.1.20 run.
Last few versions of Wine, I have not been able to use MapSource 6.13.5
software with my Garmin Edge705 unit to it's full extent, for MapSource is
unable to recognize the unit and therefore it cannot communicate with. Last
time it worked, I was using Wine 1.0.0, and when I downgraded from 1.1.20 to
1.0.1, it worked again. Wine log is attached. If there are any other tests I
can perform to help diagnose the problem, just let me know.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12527
Summary: radio button groups don't work with up/down arrow keys
Product: Wine
Version: CVS/GIT
Platform: PC
URL: http://winmerge.org/
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: user32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: msclrhd(a)gmail.com
1. Open an application that has a radio button group, e.g.:
* WinMerge (http://winmerge.org/)
* Some installers
I will use WinMerge as the example for the rest of this bug report:
2. Press Ctrl+N to create a new document
3. Enter "A" in the "Untitled left pane"
4. Enter "B" in the "Untitled right pane"
5. Close the application
This will bring up a "Save modified files?" dialog. NOTE: Using tab to navigate
around the dialog sets the focus to the correct items in the correct sequence.
6. Press the left mouse button on one of the "Save changes" radio buttons
7. Press the down arrow key
This should select the "Discard changes" radio button. The button has the
focus, but is not selected. As a workaround, pressing the space key will select
the button.
8. Press the down arrow key
This should select the "Save changes" radio button, cycling the radio button
grouping. This does not work. If you are on the bottom group, it selects the
"Discard All" button. If you are on the top group, no item is selected and
pressing the down arrow key again selects the "Untitled right" edit box.
9. Press the left mouse button on one of the "Discard changes" radio buttons
10. Press the up arrow key
This should select the "Save changes" radio button. The button has the focus,
but is not selected. As a workaround, pressing the space key will select the
button.
11. Press the up arrow key
This should select the "Discard changes" radio button, cycling the radio button
grouping. This does not work. If you are on the bottom group, it selects the
"Untitled left" edit box. If you are on the top group, it selects the "Untitled
right" edit box.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16845
Summary: Radio buttons not being checked on focus
Product: Wine
Version: CVS/GIT
Platform: Other
URL: http://www.chiark.greenend.org.uk/~sgtatham/putty/downlo
ad.html
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: user32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: munozferna(a)gmail.com
Current wine behavior is to just assign the focus to the radio button, however,
Windows checks the radio button when it gets focus through the keyboard arrows.
Steps to reproduce:
1. Open putty
2. Click the Raw radio button
3. Press right arrow twice
Actual results
* Port textbox stays at 23
* Rlogin radio button is not checked
Expected results (windows behavior)
* Port textbox changes to 513
* Rlogin radio button is checked
I'm attaching a patch that I believe fixes this, comments about it would be
appreciated.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11095
Summary: some keyboard shortcuts do not work in the celestia
installer
Product: Wine
Version: 0.9.52.
Platform: PC
OS/Version: Linux
Status: NEW
Keywords: download
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: thestig(a)google.com
I've seen this problem in some programs, but not others. Here's one problem
where it happens:
In the Celestia installer, on the initial page, it asks you to accept the GPL
license. By default, the radio button has "do not accept" selected.
On Windows, I can press "alt + a" to select the "accept" radio button. On Wine,
the "accept" button gets focus when I press "alt + a", but the radio button
doesn't get selected.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23525
Summary: Daytona USA Evolutions: some text/graphics are black,
should be colored
Product: Wine
Version: 1.2-rc6
Platform: x86
URL: http://sega.jp/pc/daytonae/trial.shtml
OS/Version: Linux
Status: NEW
Keywords: download
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=29366)
--> (http://bugs.winehq.org/attachment.cgi?id=29366)
wine screenshot
It's an old Direct 6.1 game...luckily, it's got a free download (only 42 mb).
Run the game, press enter repeatedly, and start the game. You'll see your car,
but the speedometer/time/etc. are all black. I'll attach a windows screenshot
for comparison.
Terminal output is pretty short:
fixme:win:WINNLSEnableIME hUnknown1 (nil) bUnknown2 0: stub!
fixme:win:EnumDisplayDevicesW ((null),0,0x33f1a8,0x00000000), stub!
fixme:dsalsa:IDsDriverBufferImpl_SetVolumePan (0x164150,0x164098): stub
fixme:d3d:swapchain_init The application requested more than one back buffer,
this is not properly supported.
Please configure the application to use double buffering (1 back buffer) if
possible.
fixme:heap:RtlCompactHeap (0x110000, 0x0) stub
err:ole:CoUninitialize Mismatched CoUninitialize
fixme:d3d:IWineD3DDeviceImpl_Release (0x1584e0) Device released with resources
still bound, acceptable but unexpected
fixme:d3d:IWineD3DDeviceImpl_Release Leftover resource 0x342ced0 with type
WINED3DRTYPE_SURFACE (0x1).
fixme:d3d:IWineD3DDeviceImpl_Release Leftover resource 0x3417c90 with type
WINED3DRTYPE_SURFACE (0x1).
fixme:d3d:IWineD3DDeviceImpl_Release Leftover resource 0x342ea78 with type
WINED3DRTYPE_SURFACE (0x1).
fixme:d3d:IWineD3DDeviceImpl_Release Leftover resource 0x38bb6d8 with type
WINED3DRTYPE_SURFACE (0x1).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29445
Bug #: 29445
Summary: LearningCenter.exe fail to start with mono28 but works
with native .net
Product: Wine
Version: 1.3.35
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mscoree
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fracting(a)gmail.com
Classification: Unclassified
1. Download from http://cetd.sysu.edu.cn/class/NPELSPluginSetup.rar
2. unrar NPELSPluginSetup.rar
3. winetricks -q mono210
4. install setup_v1.1.0.103(101217).exe
5. start LearningCenter.exe
$ cd "~/.wine/drive_c/Program Files/SFLEP/NPELS_LearningCenter_5.0"
$ wine LearningCenter.exe
The application could not start at all, but with native .net2.0 it can start.
Will attach full logs.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16577
Summary: ntdll/loader/actctx: add support of SxS assembly binding
redirects
Product: Wine
Version: 1.1.10
Platform: All
URL: http://nikonusa.com/software/NX/1.3/win/CNX130NSAEN.EXE
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
this is a showcase bug.
I used the app from bug 12414 as example because it highlights some of the
issues and hopefully helps to understand the problem (with my comments).
We need to end this winetricks vcrun2XXX SxS mess/hell, which requires direct
match of SxS assembly dependencies/bindings.
Download: http://nikonusa.com/software/NX/1.3/win/CNX130NSAEN.EXE
$ sha1sum CNX130NSAEN.EXE -> f31b38e3bcca17c8050c207b79315c9be23d582d
Prerequisite: clean WINEPREFIX, winetricks dotnet20
---
The first installer show stopper (which is this bug report out) are actually
two bugs: one in winetricks and one in the installer.
When you did 'sh winetricks dotnet20' step and start the installer, an error
message box will be shown shortly thereafter:
--- snip ---
Microsoft Visual C++ Runtime Library
Program: c:\windows\temp\RarSFX0\cnx.exe
R6034
An application has made an attempt to load the C runtime library incorrectly.
--- snip ---
The problem comes in form of a sub-installer dependency:
WINEDEBUG=+tid,+seh,+loaddll,+process wine ./nikon.exe
--- snip ---
...
0079:trace:process:CreateProcessW app (null) cmdline
L"C:\\windows\\temp\\RarSFX0\\cnx.exe"
...
0079:trace:process:CreateProcessW started process pid 007a tid 007b
...
007b:trace:loaddll:free_modref Unloaded module
L"C:\\windows\\temp\\nshbb9d.tmp\\UserInfo.dll" : native
007b:trace:loaddll:load_native_dll Loaded
L"C:\\windows\\temp\\nshbb9d.tmp\\process.dll" at 0x10000000: native
007b:fixme:actctx:parse_depend_manifests Could not find dependent assembly
L"Microsoft.VC80.CRT"
007b:trace:loaddll:load_native_dll Loaded
L"C:\\windows\\temp\\nshbb9d.tmp\\LIBEXPATW.dll" at 0x3d0000: native
007b:trace:loaddll:load_builtin_dll Loaded L"C:\\windows\\system32\\mpr.dll" at
0x60c50000: builtin
007b:trace:loaddll:load_builtin_dll Loaded
L"C:\\windows\\system32\\wininet.dll" at 0x60c00000: builtin
007b:trace:loaddll:load_builtin_dll Loaded L"C:\\windows\\system32\\msvcrt.dll"
at 0x60c80000: builtin
007b:trace:loaddll:load_native_dll Loaded L"C:\\windows\\system32\\MSVCR80.dll"
at 0x78130000: native
007b:trace:loaddll:load_native_dll Loaded L"C:\\windows\\system32\\MSVCP80.dll"
at 0x7c420000: native
007b:trace:loaddll:load_native_dll Loaded
L"C:\\windows\\temp\\nshbb9d.tmp\\Activation.dll" at 0x3a0000: native
--- snip ---
The culprit is: "fixme:actctx:parse_depend_manifests Could not find dependent
assembly L"Microsoft.VC80.CRT"
If we dump the embedded manifest from PE for the "Activation.dll":
--- snip ---
<assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0">
<dependency>
<dependentAssembly>
<assemblyIdentity type="win32" name="Microsoft.VC80.CRT"
version="8.0.50727.762" processorArchitecture="x86"
publicKeyToken="1fc8b3b9a1e18e3b"></assemblyIdentity>
</dependentAssembly>
</dependency>
<dependency>
<dependentAssembly>
<assemblyIdentity type="win32" name="Microsoft.VC80.CRT"
version="8.0.50608.0" processorArchitecture="x86"
publicKeyToken="1fc8b3b9a1e18e3b">
</assemblyIdentity>
--- snip ---
We can see two VC 8.0 runtime versions referenced, the VC 8.0 SP1 and an older
VC 8.0 one.
"8.0.50727.762" -> Visual C++ 2005 SP1 Redistributable Pack 8.0.50727.762
At this stage, only .NET Framwork 2.0 redist got installed as prerequisite in
WINEPREFIX.
Because of winetricks' winver 2k hack (missing junction point workaround, bug
12401), VC 8.0.50727.42 runtimes are placed in both: system32 and SxS repo.
This results in errorneous behaviour in case of SxS assembly resolver failure
(app references 8.x CRT assemblies not found in SxS) - a fallback load from
system32 - which causes the CRT error.
I already explained the differences between 2K and XP in several other bug
reports when it comes to loading of SxS assemblies.
In short: prevent any CRT (and ATL/MFC) 8.x+ runtime from being put into
system32!
Such assemblies are never to be loaded from system32 with winver > 2K!
To fix this, 'winetricks dotnet20' step needs to include the removal of these
assemblies from system32 as cleanup procedure.
A second copy is properly installed into SxS as precaution from M$ guys in the
light of win2k -> winxp update which knows about activation contexts/SxS.
--- snip .wine/drive_c/windows/system32 ---
$ ls -lsa msvc*
472 -rw-rw-r-- 1 focht focht 479232 2005-09-23 08:29 msvcm80.dll
540 -rw-rw-r-- 1 focht focht 548864 2005-09-23 08:29 msvcp80.dll
616 -rw-rw-r-- 1 focht focht 626688 2005-09-23 08:29 msvcr80.dll
..
--- snip .wine/drive_c/windows/system32 ---
The vendor msi installer bug at this stage is that the sub-installer is
executed *before* the VC redist installer which would install all required CRT
dependencies into SxS.
Hence this error is only shown once.
That sub-installer failure seems not critical.
Now one might think: "ok, lets do the usual winetricks vcrun2005 ...
vcrun2005sp1 mess" before install.
If you do this, the error will still remain (assuming you restart with clean
WINEPREFIX).
The reason is the other "old" VC 8.0 CRT version, referenced in dll manifest:
8.0.50608.0
Winetricks dotnet20 installed a VC 8.0.50727.42 CRT version into SxS (after we
removed the ones from system32).
This would ideally work but Wine's loader doesn't support the redirection of
assembly bindings yet.
If you take a look at the policy file from .NET 2.0 installed VC 8 runtime:
"c:\windows\winSxS\policies\x86_policy.8.0.Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_x-ww_77c24773\":
--- snip 8.0.50727.42.policy ---
<bindingRedirect oldVersion="8.0.41204.256-8.0.50608.0"
newVersion="8.0.50727.42"/>
--- snip 8.0.50727.42.policy ---
The policy rule would be satisfied, because the assembly asks for version
8.0.50608.0 and the current "up-to-date" version 8.0.50727.42 can be used for
that.
After VC 8.0 SP1 install (sh winetricks vcrun2005sp1), another policy file is
added:
--- snip 8.0.50727.762.policy ---
<bindingRedirect oldVersion="8.0.41204.256-8.0.50608.0"
newVersion="8.0.50727.762"/>
<bindingRedirect oldVersion="8.0.50727.42-8.0.50727.762"
newVersion="8.0.50727.762"/>
--- snip 8.0.50727.762.policy ---
This would cover (match) the first assembly binding dependency, 8.0.50727.762
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29434
Bug #: 29434
Summary: Picasa 3.9 fails to authenticate with Google
Product: Wine
Version: 1.3.28
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mihai(a)mihaic.ro
Classification: Unclassified
Created attachment 38101
--> http://bugs.winehq.org/attachment.cgi?id=38101
Output from running Picasa 3.9 in a terminal.
Picasa 3.9 fails to authenticate with Google. Picasa 3.8 works with the same
setup (Ubuntu 11.10).
The problem is known to Google:
http://www.google.com/support/forum/p/Picasa/thread?tid=1c3f770cc876aeb9&fi…
"[...] we've switched to using OAuth in Picasa 3.9 and our implementation isn't
supported on WINE."
I'm attaching the output I get when running in a terminal (wine Picasa3.exe).
When I try to connect to Google, the following line is output:
"err:ntdll:RtlpWaitForCriticalSection section 0xe10440 "?" wait timed out in
thread 0033, blocked by 0009, retrying (60 sec)"
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15315
Summary: Ace Online (aka Space Cowboy/Flysis/Air Rivals) does not
load past launcher with WINE
Product: Wine
Version: 1.0-rc3
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: littlegator(a)gmail.com
I'm somewhat new to Linux, so if anyone offers any fixes, I may not be sure how
to do it. Please inform me of the exact procedure of the fix (or anything that
may advance the situation) and I will gladly do what you ask.
Now, on to the problem. I load up Ace Online with WINE 1.0-rc3 and it brings me
to the launcher. I type in my login details, select my resolution (which is
1024 x 768), uncheck the "windowed" check box (which appears to have no effect
on the output), and wait. The game goes full screen and is white for a few
seconds. It switches to black, then, after about 10 or 15 seconds, a white
square appears in the middle of the screen. It disappear within a few frames of
appearing, and I'm stuck here. Same thing happens when windowed, it just isn't
full screen. During this process, it seems to be outputting every single
mission log in the game to the debug window. The output file is extremely long.
Now, my setup:
I'm running WINE 1.0-rc3 with DirectX9.0 installed using WineTricks. I'm
running a 1024x768 virtual desktop with no window decorations and window
manager can not control the windows.
My PC:
Intel Pentium 4 1.6GHz
512MB RAM (not sure on what type >_>)
ATI Radeon 9700 pro 128MB onboard RAM using latest Catalyst drivers
running 3.5.6-9.fc7 Fedora release: 2.6.21-1.3194.fc7
While I await a response, I'm going to attempt updating Fedora since it's
apparently an older version. I've attached the a couple output files and a
dxdiag if it may be useful.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27716
Summary: Dragon Nest (Chinese): crashes before login screen
Product: Wine
Version: 1.3.21
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: eric.gralco(a)gmail.com
Created an attachment (id=35467)
--> (http://bugs.winehq.org/attachment.cgi?id=35467)
Fixmes that are thrown during the crash
The game must be started from dnlauncher.exe. After the loading screen the game
goes to the animation before the login screen where it crashes. For the record
the game also lags at this point on Windows but does not crash.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12694
Summary: Air Rival Crashes after login
Product: Wine
Version: 0.9.59.
Platform: PC
URL: http://appdb.winehq.org/objectManager.php?sClass=version
&iId=11224&iTestingId=22275
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mifuyne(a)gmail.com
Created an attachment (id=12349)
--> (http://bugs.winehq.org/attachment.cgi?id=12349)
Log of Air Rival from Launch to Crash
The game crashes without going into the game itself. Been tested on different
versions of Windows (slightly different error on some version). The following
address leads to the log, from launcher to the crash point. It's also attached
to this report.
http://pastebin.org/30959
WINE was set to Emulate a virtual desktop at 1024 x 768 (thus avoiding the
resolution problem mentioned here:
http://appdb.winehq.org/objectManager.php?sClass=version&iId=11224&iTesting…
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24893
Summary: Explorer++ is missing most right-click options for
files/folders
Product: Wine
Version: 1.3.5
Platform: x86-64
URL: http://www.explorerplusplus.com/download
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: RandomAccountName(a)mail.com
Created an attachment (id=31524)
--> (http://bugs.winehq.org/attachment.cgi?id=31524)
Log from right-clicking a folder, then a file
Expected behavior:
Right-clicking on a file should open the same menu that would be seen in
Windows Explorer (or Winefile as the case may be), while right-clicking a
folder should do the same, but with an added "open in new tab" option.
Actual behavior:
Right-clicking on a file produces a menu with a single option, which may be
blank or random garbage. It doesn't appear to do anything either way.
Right-clicking on a folder yields a menu with only the option "open in new
tab."
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12457
Summary: SharpDevelop 2.2 crashes with NotImplementedException at
IWebBrowser2.get_LocationName()
Product: Wine
Version: CVS/GIT
Platform: Other
URL: http://www.icsharpcode.net/OpenSource/SD/Download/#Sharp
Develop22
OS/Version: other
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: shdocvw
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
http://lists.ximian.com/pipermail/mono-devel-list/2008-March/027227.html
was asking how to install SharpDevelop 2 under Wine, so I
gave it a try. "winetricks dotnet20" was enough to get it
to install and start, but after it put up the GUI, it
aborted with
fixme:shdocvw:WebBrowser_QueryInterface
(0x1af830)->({00000144-0000-0000-c000-000000000046} 0x33e800) interface not
supported
...
FATAL- System.NotImplementedException: The method or operation is not
implemented.
at System.Windows.Forms.UnsafeNativeMethods.IWebBrowser2.get_LocationName()
at System.Windows.Forms.WebBrowser.get_DocumentTitle()
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29903
Bug #: 29903
Summary: Microsoft Visual Studio 2005: enumeration of processes
fails due to wtsapi32.WTSEnumerateProcessesW() being a
stub ( "attach to process" menu))
Product: Wine
Version: 1.4-rc3
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Classification: Unclassified
Hello,
clicking "attach to process" menu item with default "local transport" leads to
an error message stating "Operation not supported. Unknown error: 0x8007000e".
The process list (listview) is empty due to WTSEnumerateProcessesW() API being
a stub.
Prerequisite: 'winetricks -q dotnet20 mfc42'
--- snip ---
...
0024:Call
wtsapi32.WTSEnumerateProcessesW(00000000,00000000,00000001,0032e828,0032e824)
ret=54bc508e
0024:fixme:wtsapi:WTSEnumerateProcessesW Stub (nil) 0x00000000 0x00000001
0x32e828 0x32e824
0024:Ret wtsapi32.WTSEnumerateProcessesW() retval=00000001 ret=54bc508e
0024:Call KERNEL32.GetProcAddress(7d910000,54cb3b3c "WTSFreeMemory")
ret=54bb97d2
0024:Ret KERNEL32.GetProcAddress() retval=7d914fc8 ret=54bb97d2
0024:Call wtsapi32.WTSFreeMemory(00000000) ret=54bc51b9
0024:fixme:wtsapi:WTSFreeMemory Stub (nil)
0024:Ret wtsapi32.WTSFreeMemory() retval=0000002b ret=54bc51b9
...
0024:Call oleaut32.SysAllocString(011722a8 L"Unable to connect to the Microsoft
Visual Studio Remote Debugging Monitor named 'nexus4'. Operation not
supported. Unknown error: 0x8007000e.") ret=54ba4f0c
...
--- snip ---
MSDN: http://msdn.microsoft.com/en-us/library/windows/desktop/aa383831.aspx
Stub source:
http://source.winehq.org/git/wine.git/blob/fddbf3b99d6582c50ede10dfddd8d438…
--- snip ---
--- snip ---
105 BOOL WINAPI WTSEnumerateProcessesW(HANDLE hServer, DWORD Reserved, DWORD
Version,
106 PWTS_PROCESS_INFOW* ppProcessInfo, DWORD* pCount)
107 {
108 FIXME("Stub %p 0x%08x 0x%08x %p %p\n", hServer, Reserved, Version,
109 ppProcessInfo, pCount);
110
111 if (!ppProcessInfo || !pCount) return FALSE;
112
113 *pCount = 0;
114 *ppProcessInfo = NULL;
115
116 return TRUE;
117 }
--- snip ---
$ wine --version
wine-1.4-rc3-65-g98f0be8
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19756
Summary: TaskCoach: Cannot add new task with a due date
Product: Wine
Version: 1.1.27
Platform: PC
URL: http://www.taskcoach.org/download.html
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jekwas(a)gmail.com
Created an attachment (id=23126)
--> (http://bugs.winehq.org/attachment.cgi?id=23126)
taskcoach.exe.log
I ran across this while testing for 8322. Task Coach is unable to add a new
task if a Due Date is specified.
To reproduce, click "New task" in the main window. Go to the Dates tab and add
a due date. Press OK, and nothing will happen. When you close Task Coach, it
will alert you of logged errors.
I have attached such a log. (Wine doesn't output with any problems when trying
to add a task)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12076
Summary: Database app refused to install unless
system32/drivers/etc/{services,host} exist
Product: Wine
Version: CVS/GIT
Platform: Other
OS/Version: other
Status: NEW
Keywords: Installer
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
A user's informix-based app refused to install until
the empty files c:/windows/system32/drivers/etc/{services,host}
were created, see
http://winehq.org/pipermail/wine-users/2008-March/030256.html
I looked around a bit for other system32/drivers/etc files.
http://support.microsoft.com/kb/130024 describes hosts, services, and protocols
http://support.microsoft.com/kb/105997 describes lmhosts
It looks like some apps find that directory by looking at
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath
and MSN Messenger 7.5 f*cks up by changing that variable's type, see
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6343068
Getting this all right would be a lot of work. Just creating
two empty files might be reasonable, though, since it
allows the user's app to install.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16666
Summary: wine segfaults on launch
Product: Wine
Version: 1.1.11
Platform: PC
OS/Version: OpenBSD
Status: NEW
Keywords: patch, source
Severity: critical
Priority: P2
Component: build-env
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=18290)
--> (http://bugs.winehq.org/attachment.cgi?id=18290)
core dump
Now for the biggest bug :-)
Wine segfaults on launch of any program. Even 'wine --version' crashes.
I've got this patch in place (from openbsd's port):
diff --git a/loader/pthread.c b/loader/pthread.c
index 4c0c892..e7f6479 100644
--- a/loader/pthread.c
+++ b/loader/pthread.c
@@ -96,6 +96,12 @@ static void init_thread( struct wine_pthread_thread_info
*info )
/* if base is too large assume it's the top of the stack instead */
if ((char *)info->stack_base > &dummy)
info->stack_base = (char *)info->stack_base - info->stack_size;
+#elif defined(__OpenBSD__)
+ stack_t stack;
+ if (pthread_stackseg_np(pthread_self(), &stack) != 0)
+ abort ();
+ info->stack_base = (char *)stack.ss_sp - stack.ss_size;
+ info->stack_size = stack.ss_size;
#else
/* assume that the stack allocation is page aligned */
char dummy;
@@ -163,6 +169,8 @@ static void init_current_teb( struct
wine_pthread_thread_info *info )
info->pid = getpid();
#ifdef __sun
info->tid = pthread_self(); /* this should return the lwp id on solaris
*/
+#elif defined(__OpenBSD__)
+ info->tid = pthread_self();
#elif defined(__APPLE__)
info->tid = mach_thread_self();
#elif defined(__FreeBSD__)
Though, it still segfaults without it.
wine-pthread.core attached
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21564
Summary: warning forever ignores keyboard input after
losing/regaining focus
Product: Wine
Version: 1.1.37
Platform: x86
URL: http://www18.big.or.jp/~hikoza/Prod/index_e.html
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: madewokherd(a)gmail.com
Steps to reproduce:
* Install Warning Forever from the linked website.
* Start the program by running c:\wf\wf.exe. (The installer does not create a
shortcut. This is the same on Windows.)
* Select "Window mode".
* Verify that the 'z' key can be used to make selections in the menu.
* Switch to another window.
* Switch back to Warning Forever window.
* Verify that keyboard input no longer works.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22369
Summary: A child window without WS_EX_MDICHILD style should not
be tiled by the WM_MDITILE message.
Product: Wine
Version: unspecified
Platform: All
OS/Version: All
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: user32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: a.m.winehq(a)gmail.com
In user32/mdi.c
-> MDITile
-> #L763(wine-1.1.42) for-loop "remove all the windows we don't want",
the windows without WS_EX_MDICHILD window style should be also removed from
win_array.
MDICascade is also.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.