http://bugs.winehq.org/show_bug.cgi?id=14638
Summary: Discription file of task configuration \'C:\plc.xml\'
not found
Product: Wine
Version: 1.1.1
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: msxml3
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hyper_sonic(a)hotbox.ru
Created an attachment (id=15045)
--> (http://bugs.winehq.org/attachment.cgi?id=15045)
console output
Codesys is a IEC 61131-3 Programming System for controllers equipment use in
Automation Process.
Application install without errors. But when i creat new project or open exist
project, Codesys say "Discription file of task configuration \'C:\plc.xml\' not
found".
The "C:\plc.xml" is one of files in discribe target.
Manufacture destributed target for this kind of controller equipment.
File c:\plc.xml is exist in ~/.wine/drive_c/plc.xml.
Console output see attache.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18404
Summary: Metatrader installation
Product: Wine
Version: 1.1.21
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dyvazar(a)numericable.fr
hi,
i'm a user of Metatrader (MT4) on Linux (ubuntu intrepid & jaunty 32) with last
wine 1.1.21.
Even using Winedoors to install Metatrader, there is a lot of non conventional
errors:
- first, before installing this program, wine folders have to be filled with
windows fonts and 2 special dll: MFC42.DLL (like that, all in capital and with
a lenght of 995383 bytes) & mfc40.dll
- winetricks have to be used too
I send you this url:
http://articles.mql4.com/416
where you can follow the rules to install Metatrader on Linux.
Wish this help you (and users indeed)
ps: doing all this do not resolve yet the icons fonts (stay grey but work)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17674
Summary: wine recaching font metrics on every run
Product: Wine
Version: 1.1.16
Platform: Macintosh
OS/Version: Mac OS X 10.5
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: andrewroth(a)gmail.com
fresh install of OS X, with updates (10.5.6)
fresh git clone and build (wine-1.1.16-292-g1b9a6fb)
every time wine runs it regenerates the cache, which takes roughly 30 seconds
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25258
Summary: AutoCAD 2010: Fails to run
Product: Wine
Version: 1.3.7
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
Created an attachment (id=32078)
--> (http://bugs.winehq.org/attachment.cgi?id=32078)
Terminal output on wine-1.3.7-172-g8925024
Steps to reproduce:
1) remove ~/.wine
2) winetricks dotnet30
3) install AutoCAD 2010 (watch out for bug #20211)
4) override windowscodecs.dll
5) wine acad.exe
Behaviour:
AutoCAD error, Wine error, AutoCAD splash screen and information that AutoCAD
was installed incorrectly
Expected behaviour:
AutoCAD should start.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25386
Summary: Poker Night: random long delays between turns and
conversations
Product: Wine
Version: 1.3.5
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: VincentBeers(a)gmail.com
Game is from TellTale Games by the name of Poker Night at the Inventory.
Basically, the problem I have is that sometimes, between turns, the game will
have long delays in which nothing seems to happen (ie the application hangs).
It takes much, much longer than usual to load or interpret a resource than it
should take (or so I assume).
A bigger problem is that these delays are much longer when starting up the game
or any significant screen changes. It can take more than a minute longer to
load the game or any specific areas than it would in Windows.
The terminal isn't spewing out anything during these loading periods, so
attached is all terminal output generated by the app, even outside of these
hanging bits. Steam output may be mixed in too.
Notes:
Unfortunately, this game is not available for free, however, it is available
for fairly cheap (5 euros) for those willing to try. I think some other
TellTale games (and free demos) have the same issue however (they all run on
the same engine, though all of them have some minor differences, improvements,
etc.).
Using the Steam version, but I'm sure the non-Steam version has the same issue
(though I couldn't test as Wine 1.3.7 wouldn't load the game for me). The game
works in 1.3.8, though with loading problems.
Another note is that I am playing the game on a FAT32 partition. This may
affect performance, but I do not expect it to take this much longer, thus it
would still be a bug.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29663
Bug #: 29663
Summary: Rayman 3 crashes with a new game
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: SolisX007(a)yahoo.com
Classification: Unclassified
Created attachment 38467
--> http://bugs.winehq.org/attachment.cgi?id=38467
Regression test result
Rayman 3 gets choppy and sometimes crashes when i start
a new game while Rayman is flying around with the frog. I
know that it works fine on wine-1.3.22 and that in wine-1.3.23
it is broken.
I tried to do a regression test which i will attach to this bug
report. Please keep in mind the this is my first regression test.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18799
Summary: Crysis: Silent crash after first intro scene
Product: Wine
Version: 1.1.22
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-ddraw
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: liquitsnake(a)gmx.net
This appeared between 1.1.18 and 1.1.19:
Crysis seems to crash after first intro scene with the alien ship opening. Just
before the second scene with the airplane would start, it falls back to the
desktop. No suspicious console log.
Regression test:
014c4bfc70a4d4e60f033d579d1be13a46f65170 is first bad commit
commit 014c4bfc70a4d4e60f033d579d1be13a46f65170
Author: Stefan Dösinger <stefan(a)codeweavers.com>
Date: Thu Apr 9 18:40:57 2009 +0200
wined3d: Save some memory in vertex buffers.
In most cases we're fine with the vbo and glMapBuffer and never use the
actual
heap memory copy. Try to stick to just the vbo copy and avoid allocating
the
extra heap memory. In case it is needed(emulation or vertex conversion),
fall
back to the old double buffering mode.
:040000 040000 e45dcc2b8694735b0a68492a7a03237b1c519ae3
0447d35c1e1a2037a962b49802a03a9dad1bf59e M dlls
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25836
Summary: hh.exe error: fixme:htmlhelp:doWinMain Unhandled HTML
Help command line parameter! (-decompile)
Product: Wine
Version: 1.3.10
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wiltave(a)zipmail.com.br
I've tried to decompile a CHM file (CHM to HTML) but i get the following error:
fixme:htmlhelp:doWinMain Unhandled HTML Help command line parameter!
(-decompile)
$ wine /usr/local/lib/wine/fakedlls/hh.exe -decompile html/ file.chm
Following the link
http://www.help-info.de/en/Help_Info_HTMLHelp/hh_command.htm, the command line
parameters are right.
I will try Wine 1.3.11 too.
Thank you.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26955
Summary: Prince of Persia SoT: control key bindings don't
change properly
Product: Wine
Version: 1.3.18
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-dinput
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jonescaseyb(a)gmail.com
In the game Prince of Persia: The Sands of Time, if you try to change the
keybinding for one of the controls it will always interpret the key as "Pause".
For instance, if you press the "m" key, it will be interpreted as "Pause".
This applies to any key on the keyboard. However, using mouse buttons works
fine.
If you leave the control settings at their default settings, they do work in
game. However if you change one, it does not work because it isn't being
assigned properly.
My best guess is that the bug lies in whatever function the game calls to
listen for a key press in the control settings.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27285
Summary: Miro does not display Chinese
Product: Wine
Version: 1.3.20
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fracting(a)gmail.com
Created an attachment (id=34893)
--> (http://bugs.winehq.org/attachment.cgi?id=34893)
Screenshot: miro does not display Chinese
1. download Miro 4
$ wget http://ftp.osuosl.org/pub/pculture.org/miro/win/Miro_Installer.exe
from http://www.getmiro.com/download/for-windows/
2. install miro , choose "Chinese", Chinese character display correctly.
3. start miro first time, choose "Chinese(CN)" in the Language select window,
then the miro setup will display Chinese character as someting like
========
8B 8A FF
ED 00 1A
========
See screenshot for details.
$ wine Miro.exe
fixme:winhttp:WinHttpGetIEProxyConfigForCurrentUser returning no proxy used
fixme:msvcrt:_setmbcp trail bytes data not available for DBCS codepage 0 -
assuming all bytes
Gtk-Message: Failed to load module "canberra-gtk-module":
`libcanberra-gtk-module.dll': Module not found
fixme:system:SetProcessDPIAware stub!
fixme:iphlpapi:NotifyAddrChange (Handle 0x5efe9a4, overlapped 0x5efe988): stub
fixme:ntdll:NtLockFile I/O completion on lock not implemented yet
C:\Program Files\Participatory Culture
Foundation\Miro\share\themes\Clearlooks-Visto\gtk-2.0\gtkrc:54: Clearlooks
configuration option "menuitemstyle" is not supported and will be ignored.
C:\Program Files\Participatory Culture
Foundation\Miro\share\themes\Clearlooks-Visto\gtk-2.0\gtkrc:55: Clearlooks
configuration option "listviewitemstyle" is not supported and will be ignored.
C:\Program Files\Participatory Culture
Foundation\Miro\share\themes\Clearlooks-Visto\gtk-2.0\gtkrc:56: Clearlooks
configuration option "progressbarstyle" is not supported and will be ignored.
fixme:appbar:handle_appbarmessage SHAppBarMessage(ABM_GETTASKBARPOS,
hwnd=(nil)): stub
err:ole:CoGetClassObject class {591209c7-767b-42b2-9fba-44ee4615f2c7} not
registered
err:ole:CoGetClassObject class {591209c7-767b-42b2-9fba-44ee4615f2c7} not
registered
err:ole:CoGetClassObject no class object {591209c7-767b-42b2-9fba-44ee4615f2c7}
could be created for context 0x3
fixme:toolhelp:CreateToolhelp32Snapshot Unimplemented: heap list snapshot
fixme:toolhelp:Heap32ListFirst : stub
fixme:winhttp:WinHttpGetIEProxyConfigForCurrentUser returning no proxy used
fixme:winsock:WSAIoctl SIO_GET_EXTENSION_FUNCTION_POINTER: unimplemented
TransmitFile
fixme:winsock:WS_setsockopt Unknown IPPROTO_IPV6 optname 0x00000017
fixme:msvcrt:MSVCRT__wsopen_s : pmode 0x01b6 ignored
fixme:thread:NtQueryInformationThread Cannot get kerneltime or usertime of
other threads
fixme:msvcrt:MSVCRT__wsopen_s : pmode 0x01b6 ignored
fixme:msvcrt:MSVCRT__wsopen_s : pmode 0x01b6 ignored
fixme:msvcrt:MSVCRT__wsopen_s : pmode 0x01b6 ignored
fixme:file:MoveFileWithProgressW MOVEFILE_WRITE_THROUGH unimplemented
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19527
Summary: Bullet points are invisible in wordpad
Product: Wine
Version: unspecified
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: richedit
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: w41ter(a)gmail.com
[running wine.git current as of today, 30 Jul 09]
When using bullet points in wordpad, the bullets don't show:
fixme:richedit:ME_HandleMessage EM_FORMATRANGE: stub
Installing riched30 from winetricks fixes the problem.
(Filing this bug at Austin's request.)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14928
Summary: SonicStage 4.3 installer crashes almost immediately
Product: Wine
Version: 1.1.2
Platform: PC
URL: http://forums.minidisc.org/index.php?showtopic=9586
OS/Version: Linux
Status: NEW
Keywords: download, Installer
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Blocks: 4084
Created an attachment (id=15502)
--> (http://bugs.winehq.org/attachment.cgi?id=15502)
+relay,+seh,+tid
Crashes nearly instantaneously. +relay,+seh,+tid attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25523
Summary: printing from wordpad prints an empty page to a cups
printers
Product: Wine
Version: 1.3.8
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: advpack
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: joachim.backes(a)rhrk.uni-kl.de
Editing some text in wordpad and then trying to print to a cups IPP printer
only prints an empty page. If I print to a (PS) file, that PS file is empty.
No msg in /var/log/cups/error_log!
NB: If I try to print with IE7, nothing happens: no print dialog appears (I
don't know if that has the same reasons as it happens in wordpad).
OS: Fedora 14, Kernel 2.6.35.9-64.fc14.i686.PAE.
All updates applied!
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9522
Summary: Text entry box does not refresh properly, but worked in
v 0.9.20 and below
Product: Wine
Version: 0.9.21.
Platform: PC
URL: http://www.xcalibur.co.uk/MuckClient/
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P4
Component: wine-gdi-(printing)
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: pdurland(a)gmail.com
As far as I know, this is an issue that exists in only one application, but
could extend to others.
The application is minor and the bug is minor so this is just a minute fix.
According to this page:
http://appdb.winehq.org/appview.php?iVersionId=8240&iTestingId=12794
Paul Fisher has been able to reproduce this on 3 separate versions of wine.
------------
Linux Distribution information: Ubuntu 7.04 on x86
Program: Muckclient v3.42
Issue: After connecting to a world, any text entered into the input box at the
bottom of the window will not be seen. I had this issue with 0.9.44 and
reverted back to 0.9.15 thanks to a testing note on the application DB pages. I
then grabbed different versions from that point and found the exact version
that 'broke' this functionality.
The 'break' occurred between 0.9.20 and 0.9.21, hence the version number I've
used in the report.
To reproduce:
Download and install program through wine.
Launch program.
Connection window will pop up. Double click on the entry already in the list.
Try typing in the entry box on the window that appears. No text will be seen.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27923
Summary: Endnote X5 Demo doesn't display text in left pane
properly
Product: Wine
Version: 1.3.24
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: richedit
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
A Reddit user complained today in
http://www.reddit.com/r/linux/comments/j0u8c/help_getting_endnote_x4_workin…
that Endnote X4 didn't display text in the left hand page.
That's also a complaint in the appdb.
The current demo is Endnote X5, but it has the same problem.
The console shows lots of
fixme:richedit:ME_HandleMessage EM_FORMATRANGE: stub
fixme:richedit:ME_HandleMessage EM_DISPLAYBAND: stub
'winetricks riched20' works around it.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25897
Summary: Logbook printing in MCC Pilotlog renders all
characters lower case.
Product: Wine
Version: 1.3.12
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: charliethepilot(a)gmail.com
Created an attachment (id=33005)
--> (http://bugs.winehq.org/attachment.cgi?id=33005)
Terminal output from MCC Pilotlog
Using MCC Pilotlog Vista/7 version, AppDB entry here:
http://appdb.winehq.org/objectManager.php?sClass=version&iId=22277
When printing, all characters are rendered in lower case only. When using the
same feature on an installation on a Vista VM, a mix of upper and lower case
characters can be clearly seen.
This bug can be repreoduced most easily by clicking 'Settings -> Logbook
printing', then the icon next to 'View Demo'. Same result from the 'Print log
and forms' menu. Affects whichever printer I choose.
Terminal output attached, this issue starts shortly after line 333.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21135
Summary: Virtual desktop resolutions not correctly reported
under nvidia TwinView
Product: Wine
Version: 1.1.35
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: michael(a)araneidae.co.uk
The set of available screen resolutions reported to applications running in a
virtual desktop doesn't seem to sensibly match the physical screen resolutions
available.
For example, running a TwinView setup with a 1920x1200 + 1280x1024 screens, the
largest screen resolution available to applications appears to be 1280x1024.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29531
Bug #: 29531
Summary: Folder navigation causes audio playback glitches in
CDBurnerXP
Product: Wine
Version: 1.3.36
Platform: x86-64
URL: http://cdburnerxp.se/download?more-options
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: winealsa.drv
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: RandomAccountName(a)mail.com
CC: aeikum(a)codeweavers.com
Classification: Unclassified
Regression SHA1: b0652dd8bdb144645be4a6bf77cbb68a8ade49d9
Created attachment 38258
--> http://bugs.winehq.org/attachment.cgi?id=38258
+tid,+mmdevapi,+winmm,+midi,+dsound,+dmusic,+mci,+oss,+alsa,+coreaudio log
(4.3MB)
CDBurnerXP has an integrated audio player to allow playing the tracks in an
audio CD compilation before burning it. It also has a file browser from which
audio files can be added to the compilation.
Trying to use both of these features at once causes audio playback glitches
since 1.3.31: when changing folders in the file browser, the currently-playing
audio may stutter for a moment (not every time). Regression testing indicated:
b0652dd8bdb144645be4a6bf77cbb68a8ade49d9 is the first bad commit
commit b0652dd8bdb144645be4a6bf77cbb68a8ade49d9
Author: Andrew Eikum <aeikum(a)codeweavers.com>
Date: Mon Oct 10 15:56:55 2011 -0500
winealsa.drv: Don't try to control ALSA's behavior.
Now, winealsa maintains its own buffer, which is written to ALSA on the
period cycle requested by the application. We also let ALSA start when
it has enough data and stop when it runs out, recovering from the
expected underruns. This seems to be more like how ALSA expects to be
used.
:040000 040000 874ae9456f596d46ee3911eabcbc6f291afe48cb
62ca893abef4dd0459b201d4c45d0c7b0c87a989 M dlls
git checkout b0652dd8bdb144645be4a6bf77cbb68a8ade49d9 -> changing folders can
interrupt audio playback
git checkout b0652dd8bdb144645be4a6bf77cbb68a8ade49d9^ -> audio is never
interrupted
The attached log is from a system using just ALSA, no PulseAudio. I also
checked another system with PulseAudio running, and the same problem exists
there.
Steps to reproduce:
1. Install .NET prerequisite with winetricks dotnet20
2. Install and run CDBurnerXP
3. Choose "audio disc" mode from the main menu
4. Use the file browser at the top and the "add" button to add at least one
wav/flac/mp3 file to the compilation (drag and drop won't work, see bug 22691)
5. Double-click the audio file in the lower section of the screen to start
playback (the "play" button won't work, even on Windows)
6. Now use either the treeview or listview portion of the file browser to enter
various folders
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19478
Summary: Earthworm Jim 3D: Only displays a quarter of the
screen.
Product: Wine
Version: 1.1.26
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ezekiel000(a)lavabit.com
When the GOG.com version of Earthworm Jim 3D is launched only the bottom left
corner of the games screen appears in the top left corner of the screen (see
screenshot).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22762
Summary: Battlefield Bad Company 2 tries to use DX10, fails
Product: Wine
Version: 1.1.44
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
As described in
http://appdb.winehq.org/objectManager.php?sClass=version&iId=19520
you have to tell bfbc2 to use directx9, or it will use dx10 and just
sit there. It's supposed to be autodetecting, so maybe our dx10 shouldn't
advertise itself yet?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17918
Summary: AvsP Preview window fails to load
Product: Wine
Version: 1.1.18
Platform: All
URL: http://avisynth.org/qwerpoi/
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: cheeseboy(a)awesome-toons.org
Created an attachment (id=20249)
--> (http://bugs.winehq.org/attachment.cgi?id=20249)
wine log
AvsP is a IDE for avisynth.
I am on gentoo linux and am runnng wine 1.1.18. When I open a avs script or
write one in editor and attemp to preview it Only a black box appears.
Pic: http://i39.tinypic.com/2s17rrk.jpg
How to reproduce:
Download install avisynth from
http://downloads.sourceforge.net/avisynth2/Avisynth_258.exe
Download http://www.avisynth.org/qwerpoi/AvsP_v2.0.2.zip
Unzip AvsP_v2.0.2.zip and open AvsP.exe
type either MPEG2Source("Z:\path\to\file.mpg") avisource("Z:\path\to\file.avi")
note: for avi you may need a codec
press f5 to preview video
log attached below
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15473
Summary: After Effects 4 crashes on startup
Product: Wine
Version: 1.1.5
Platform: Other
URL: http://download.adobe.com/pub/adobe/aftereffects/win/4.x
/ae4try_uk.exe
OS/Version: other
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
sha1sum of ae4try_uk.exe is 8b9dd9bbe422209a311c5f0ce9054e2e687f5450
App installs ok and puts up a gui when you start it, but quickly
crashes with dialog
"After Effects can't continue: sorry, an abnormal condition has been detected"
+seh shows there's an exception, but the +relay,+text,+seh log isn't
very illuminating. Running in winedbg gives a nice stack dump;
inside SetWindowPos(), for some reason DefWindowProc gets WM_KEYF1
and sends WM_HELP, which is handled by the app's window procedure, which
crashes on a near-null pointer access.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14617
Summary: 3rd party treeview stopped working
Product: Wine
Version: 1.1.1
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: brendan.dowds(a)sciencesoft.com
CC: julliard(a)winehq.org
Hello all,
I am a developer for a software company trying to get our software to work on
WINE. Unfortunately the third party treeview control we rely heavily on fails
to work properly. Namely in that we can not drag items from the treeview.
A small test program (TV_Test.exe), written in VB6, is attached to demostrate
this behaviour. Upon clicking on a node the program performs a HitTest to
determine what type of node it is and its subsequent behaviour
(expand/collapse, allowing dragging, etc.)
To duplicate place the attached folder in the 'Program Files' folder (or where
you please) and run the exe, through WINE obviously. Add a node (or several)
via the button then click on a node. The message box should then tell you if
the test has been passed or not. A successful test should also change to be a
couple of right pointing arrows, and the direction of the arrow in the treeview
node (if it was the lowest branch level). A failed test reports an error
("Error: Error in loading DLL (No.48) In ClickedNode") in the message box.
Now, this is where I know I'm breaking the rules. But this test program and our
main program (which I hope to at to the Apps Database today) both need wine
tricks to have been run, specifically vcrun6, for redistribution reasons.
However, I've already emailled Dan Kegel and he believes this may not be
necessary. I digress.
The test program always failed without winetricks vcrun6, but after it (and
before the bad revision) it worked. (Strictly you do not need to run the full
vcrun6, you need to remove the msvcrt, oleaut32 and olepro32.dlls from the
drive_c/windows/sysem32/ folder and run the vcredist.exe through WINE.)
A colleague looked into this problem in more detail hoping to solve it
ourselves (how wrong we were) and we believe that although we use winetricks,
in this case it actually helps expose a bug rather than the bug being something
intrinsic in what we use winetricks for i.e. replace built-in dlls with native
ones.
So in summary, running the test program without vcrun6 has always failed, with
vcrun6 it used to work but now doesn't.
Some more relevant information (I hope):
- I pulled down the latest git repository this morning (SHA1 ID:
2f445e4e4a74bda3034d993226f05073e777eb85) and tested it, the bug is still there
(wine-1.1.1-339-g2f445e4).
- I'm running FC6
- gcc version is 4.1.2
- command to run the program is '"wine C:\Program Files\Treeview
Test\TV_Test.exe"', assuming the folder is located in 'Program Files'
- A git-bisect showed the first bad revision to be between 0.9.37 and 0.9.38
(SHA1 ID:2f445e4e4a74bda3034d993226f05073e777eb85)
- Further investigation found that by commenting out just two lines the
program worked. And still works in the lastest version. The two lines are in
load_library of /dlls/kernel32/module.c and are shown in the attached file
(load_library_EDITTED.txt)
- The git log for the bad revision is attached.
- My intention was to also attach the output of WINEDEBUG but with the below
command:
$ WINEDEBUG=+relay wine "C:\windows\Program Files\Treeview Test\TV_Test.exe"
I get:
WINEDEBUG=+relay: Command not found.
Look forward to hearing anything and many thanks.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13683
Summary: Ultima IX: Mouse pointer missing when reading books,
under inventory
Product: Wine
Version: 1.0-rc3
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: rixa(a)cs.tut.fi
When opening an in-game book for reading, there is nothing to work as a mouse
pointer to help clicking the page corners or other clickable elements with. The
books do work, but finding the correct spot to click without any pointer is
quite hard. Saving and loading the game as well as selecting spells are also
implemented by an in-game book, so these functions are likewise affected.
A similar issue affects using the inventories and toolbelt, though the pointer
is not so much missing as being drawn under instead of over the inventory
panel. Otherwise the game seems to work well.
I'm running wine 1.0rc3 on a CentOS 5 system with a GeForce4 Ti 4800 graphics
card and nVidia proprietary drivers version 96.43.05.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12652
Summary: Rainbow six Vegas 2 Fails to launch with General
Protection fault
Product: Wine
Version: 0.9.59.
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: xarnze(a)googlemail.com
Created an attachment (id=12297)
--> (http://bugs.winehq.org/attachment.cgi?id=12297)
Console output from Rainbow six Vegas 2 winever 0.9.59.
Rainbow six Vegas 2 launches and the splash screen appears however shortly
afterwards the game crashes with a message stating General protection fault!
History: Address = 0x45b08ec (filename not found)
i have attached the console output bellow.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19344
Summary: Adobe Photoshop CS2: Some files missing on
installation (appinstall)
Product: Wine
Version: 1.1.25
Platform: PC
URL: http://download.adobe.com/pub/adobe/photoshop/win/cs2/
Photoshop_CS2.exe
OS/Version: Linux
Status: NEW
Keywords: download, Installer
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Installed on windows XP, but not on wine:
C:\Program Files\Adobe\Adobe Photoshop CS2\install.adb
C:\Program Files\Adobe\Adobe Photoshop CS2\Helpers\Jump To HTML
Editor\Notepad.LNK
C:\Program Files\Adobe\Adobe Help Center\install.adb
C:\Program Files\Adobe\Adobe Help Center\AdobeHelpData\Database\vbox.err
C:\Program Files\Adobe\Adobe Bridge\install.adb
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13094
Summary: UltraEdit: crashes in certain cases with Unicode editing
Product: Wine
Version: 1.0-rc1
Platform: PC
URL: http://www.ultraedit.com/files/ue_english.zip
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdi32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fbcrack(a)yahoo.es
Created an attachment (id=12867)
--> (http://bugs.winehq.org/attachment.cgi?id=12867)
UltraEdit 32 v14.00a unicode editing crash log
Wine crashses when performing following actions:
1. File->New (Ctrl+N)
2. Write any non ASCII character (eg: ñ)
3. File->Conversions->ASCII to UTF8 (Unicode Editing)
4. Enter hex. edition mode via Edit->HEX Functions->HEX Edit or pressing Ctrl+H
5. Return normal edition mode Edit->HEX Functions->HEX Edit or pressiong Ctrl+H
UltraEdit then shows the following error message:
An error has ocurred. The application will shut down.
Would you like to save an error report?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27103
Summary: JigsawADay.com puzzle application: slow screen
refreshing
Product: Wine
Version: 1.3.19
Platform: x86
URL: http://www.jigsawaday.com/
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: msvfw32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gyebro69(a)gmail.com
Created an attachment (id=34543)
--> (http://bugs.winehq.org/attachment.cgi?id=34543)
terminal output
There is a noticeable lag when you pick up a puzzle piece and move it across
the screen. If you switch to another window then switch back to the
application, the refreshing of the app window is also much slower than on
Windows (I've tried the app in WinXP running under Virtualbox).
As a workaround, using native msvfw32.dll improves the situation a lot.
It seems the preview window has the most impact on the issue: try to minimize
it and you'll see that the lagging issue improved somewhat.
The application can be downloaded from the URL linked above. It doesn't require
installation and it has a size of only a few hundred kilobytes.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15758
Summary: Page Maker 6.5 can't find resource file
Product: Wine
Version: 1.1.0
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: pgr(a)arcelectronicsinc.com
When checking bug 4836 in pagemaker 6.5 a regression was prevented testing.
After this commit when starting pm65.exe a dialog box pops up stating it could
not find resource file pm65.rsl and after clicking ok the program exits.
8e5f28127644344247056337a4eeca71f0e43322 is first bad commit
commit 8e5f28127644344247056337a4eeca71f0e43322
Author: Alexandre Julliard <julliard(a)winehq.org>
Date: Mon Jun 30 12:51:35 2008 +0200
ntdll: Add some sanity checks for invalid relocation blocks.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19585
Summary: Water is red in Settlers: Heritage of Kings demo
Product: Wine
Version: 1.1.26
Platform: PC
URL: http://videogames.yahoo.com/predownload?eid=56657
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: alex(a)thehandofagony.com
Created an attachment (id=22839)
--> (http://bugs.winehq.org/attachment.cgi?id=22839)
Screenshot showing the problem
The water in the demo version of Settlers: Heritage of Kings is displayed in a
red hue instead of a blue one; see attached screenshot.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26767
Summary: U-he Tyrell, Uhbik and ACE vst plugins: GUI Knob bug
(image files files not being sorted correctly)
Product: Wine
Version: 1.3.17
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: futuretodd(a)googlemail.com
Created an attachment (id=34093)
--> (http://bugs.winehq.org/attachment.cgi?id=34093)
gif anim of knob behaviour, should show a smooth movement from left to right
U-he Tyrell, Uhbik and ACE vst plugins show erratic graphical behaviour in use
(see attatched gif)
They actually work as they should do if this odd graphics behaviour is ignored.
The images for the knobs are saved in, ie for Tyrell, /(user vst
folder)/TyrellN6Win/TyrellN6.data/Data/Images/Animations/Knob/ and are labeled
Knob0000.png - Knob0100.png, which goes from leftmost image to rightmost, when
they actually make to the plugin they are all jumbled up, so it appears wine is
not sorting them numerically by their names correctly.
Tyrell is free so is recommended for testing
http://www.u-he.com/TyrellN6/downloads/TyrellN6Win.zip
Tested with Reaper and Minihost
http://www.cockos.com/reaper/download.phphttp://www.tobybear.de/p_minihost.html
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19081
Summary: Force closing winhlp32 without a file loaded pops up
an error dialog (appinstall)
Product: Wine
Version: 1.1.24
Platform: PC
OS/Version: Linux
Status: NEW
Keywords: download, source, testcase
Severity: minor
Priority: P2
Component: programs
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=22023)
--> (http://bugs.winehq.org/attachment.cgi?id=22023)
ahk test
A bit hard to explain...but launching 'wine winhlp32' with no arguments open
wine help, along with a file open dialog. That's all well and good, same as
windows. Now, let's get tricky. Force the winhlp32 window to close (not the
file open dialog). On windows, exits with no problems. On wine, pops up a
dialog:
ERROR
Cannot find ''. Do you want to find this file yourself?
I'll attach an AHK script to show what I mean...If you want to verify on
windows, change 'Wine' to 'Windows'.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28172
Summary: Civilization II crashes on startup
Product: Wine
Version: 1.3.26
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: charlespigott(a)googlemail.com
Created an attachment (id=36092)
--> (http://bugs.winehq.org/attachment.cgi?id=36092)
backtrace(s) + some notes
see attachment
starting civ2.exe (from anywhere) results in this error
note that nothing happens except this output/backtrace
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10156
Summary: "typos" on some include files
Product: Wine
Version: 0.9.47.
Platform: All
OS/Version: All
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: wine-winelib
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: sacrom(a)gmail.com
CC: sacrom(a)gmail.com
Created an attachment (id=8741)
--> (http://bugs.winehq.org/attachment.cgi?id=8741)
File that contains diff's of the current header files with the "fixed" header
files
I'm porting a windows app to Wine (using WineLib) and I found some small
problems in some header files in Wine (that contain different values from the
corresponding Windows header files).
To be able to compile on C++ I did also change some header files.
>From my point of view these are small typos problems (see attachment)
I hope this to be enough!
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15537
Summary: PURE DVD : FGLRX GL_INVALID_OPERATION
Product: Wine
Version: 1.1.5
Platform: Other
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bellegueulle.damien(a)neuf.fr
Created an attachment (id=16510)
--> (http://bugs.winehq.org/attachment.cgi?id=16510)
Log
After launch game .... black screen.
I use wine 1.1.5 and fglrx 8.5 ( ATI 4820HD )
View my log in attachment :)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29319
Bug #: 29319
Summary: Internet Explorer 8 fails to start an InPrivate
Browsing session
Product: Wine
Version: 1.3.34
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: wininet
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: RandomAccountName(a)mail.com
Classification: Unclassified
Created attachment 37920
--> http://bugs.winehq.org/attachment.cgi?id=37920
Terminal output
Nothing happens when trying to start an InPrivate Browsing session in IE8.
Steps to reproduce:
1. winetricks ie8
2. Start IE and go to tools -> InPrivate Browsing
Workaround: WINEDLLOVERRIDES=wininet=n
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26942
Summary: CSPRO 4 editing : context menu on grid header not
working properly
Product: Wine
Version: 1.3.17
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: iip.umar.rifai(a)gmail.com
How to test:
1. download cspro here http://www.census.gov/ipc/www/cspro/download/cspro40.exe
2. Run Cspro 4.0 program
3. Open file/application, goto examples/capi
4. Go to form shown on the screenshoot (attached)
5. Right click on the grid header to show the context menu, the menu will show
after you pressing ALT.
Maybe related to comctl32.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21205
Summary: ACDSee 8.0 Program won't start
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: eric(a)emlorenz.com
When the desktop Launcher for ACDSee is clicked, it appears to start, and shows
the 'starting ACDSee' icon in the bar as screen bottom, then abruptly stops. No
error messages are shown.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30063
Bug #: 30063
Summary: "finish" button of readbook configure wizard is
unavailable
Product: Wine
Version: 1.4-rc6
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fracting(a)gmail.com
Classification: Unclassified
1. Download readbook
http://dl-sh-ocn-1.pchome.net/03/um/RB_Setup_Plus1.51.zip
2. unzip and install
$ wine RB_Setup_Plus1.51.exe
always select "next"/"下一步"
3. Start readbook
$ cd .wine/drive_c/ReadBOOK
$ wine ReadBook.exe
A configure wizard dialog will popup in the first time starting readbook.exe
4. click "next"/"下一步" , next, next ...
5. click "finish"/"完成"
Actual result:
Nothing happen when clicking "finish"
Expect result:
Finish the configure and quit from the configure wizard.
I've confirm on winxp that the "finish" button works
LANG=zh_CN.utf8
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29756
Bug #: 29756
Summary: ws2_32: getaddrinfo edge cases broken on OS X
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: winsock
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: code(a)klickverbot.at
Classification: Unclassified
getaddrinfo() responds differently to edge cases on Windows, Linux and OS X;
notably, the Winsock incarnation accepts more combinations of null/empty
host/port strings than the others do. Some steps to resolve the issues this
creates for Wine clients have been made in commits 75be2284 and 8e5d5bf5.
Unfortunately, the current implementation (1.4-rc1, Git f0cfa7cf) does not work
on OS X, because the host part of the FQDN of the local machine usually doesn't
resolve. The attached patch fixes this issue and another difference in behavior
between Winsock/Windows and Wine/OSX.
While tracking this down, I compared a number of param/flag combinations; the
detailed results are at
http://klickverbot.at/blog/2012/01/getaddrinfo-edge-case-behavior-on-window….
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29684
Bug #: 29684
Summary: Setting useragent is unimplemented
Product: Wine
Version: 1.3.37
Platform: x86
URL: http://netikka.net/dev/useragent.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: mshtml
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ocean04(a)suomi24.fi
Classification: Unclassified
Example: http://netikka.net/dev/useragent.exe
Click "Test useragent" navigates to http://whatsmyuseragent.com
Page should show: Mozilla/4.0 (testing useragent)
Problem:
fixme:mshtml:OleControl_OnAmbientPropertyChange not supported AMBIENT_USERAGENT
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23283
Summary: Cannot print my annual income tax return in
ElsterFormular (crash)
Product: Wine
Version: 1.2-rc3
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: johannesobermayr(a)gmx.de
ElsterFormular crashes when I try printing my annual income tax return:
wine-snapshot-1.2.rc3.20100618-1.1.i586 (openSUSE 11.2)
err:seh:setup_exception_record stack overflow 1228 bytes in thread 001c eip
7bc3efd8 esp 00240e64 stack 0x240000-0x241000-0x340000
You can download the app for free here:
https://www.elster.de/elfo_down4.php?who=2009/2010
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18023
Summary: Graph 4.4 will not allow you to add labels
Product: Wine
Version: 1.1.19
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: tagrain(a)gmail.com
When adding a label to a graph a dialogue appears "system error code 5" or
"abnormal program termination". Could this be an ole problem?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15482
Summary: iTunes 8.0.0.35 fails connecting to iTunes Store
Product: Wine
Version: 1.1.5
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: wininet
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: peter.kovar(a)gmail.com
iTunes8Setup.exe SHA1 09bd8dd0b055f1b63205d5c9c9a00e4d42e38a3e
Attempt to connect ends w/ failure:
We could not complete your iTunes Store request. A secure network connection
could not be established.
Make sure SSL 3.0 or TLS 1.0 is enabled in the Internet Options control panel,
then try again.
err:wininet:NETCON_secure_connect SSL_connect failed:
error:00000000:lib(0):func(0):reason(0)
F9 Sulphur
rpm -q wine
wine-1.1.5-1.fc9.i386
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23636
Summary: Distnoted.exe crashes, iTunes 7.7.0.43
Product: Wine
Version: 1.2-rc7
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: rusivi1(a)gmail.com
Created an attachment (id=29568)
--> (http://bugs.winehq.org/attachment.cgi?id=29568)
wine C:\\Program\ Files\\iTunes\\iTunes.exe
iTunes 7.7.0.43 crashes due to Distnoted.exe crashing.
apt-cache policy wine1.2
wine1.2:
Installed: 1.2~rc7-0ubuntu2
Candidate: 1.2~rc7-0ubuntu2
Version table:
*** 1.2~rc7-0ubuntu2 0
500 http://ppa.launchpad.net/ubuntu-wine/ppa/ubuntu/ lucid/main
Packages
100 /var/lib/dpkg/status
1.1.42-0ubuntu4 0
500 http://us.archive.ubuntu.com/ubuntu/ lucid/universe Packages
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17226
Summary: SimTower crashes on dereferencing 0xffffffff on
attempting to save in SimTower
Product: Wine
Version: 1.1.14
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: kernel32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: Rincebrain(a)gmail.com
Created an attachment (id=19185)
--> (http://bugs.winehq.org/attachment.cgi?id=19185)
SimTower crashlog from 2009-Feb-1 git
Tested against wine-1.1.13-607-g8e39646.
The game runs fine, modulo sound [see other bug filed against simtower], but
when you attempt to save, the save dialog pops up, you can enter a filename,
and then upon hitting save, you receive a backtrace in the console.
Trace attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19286
Summary: puTTy connection manager: two UI bugs makes program
unusable
Product: Wine
Version: 1.1.23
Platform: PC
URL: http://appdb.winehq.org/objectManager.php?sClass=versi
on&iId=17165
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P1
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gui4life(a)gmail.com
Created an attachment (id=22324)
--> (http://bugs.winehq.org/attachment.cgi?id=22324)
output from wine puttycm.exe &> newputtylog.txt
The user interface for PuTTy connection manager does not display correctly
making it a broken application inside of wine.
It is not displaying the far most right window called "Connection Manager" that
displays the list of your saved connections. You should be able to click any
of the connections of which you want to connect, and it would launch a tabbed
putty window.
Most importantly, the putty intergeneration itself is not being displayed
inside of putty connection manager. In the middle of the application you
should be able to have multiple putty windows open that are separated by tabs
and you are able to move them around. (Stacking along side themselves if you
like)
To get a better idea what I mean, it is best to try the program out yourself in
windows where it works flawlessly.
I have tried many things to get this application to work. I installed net 2.0
and msxml6. I saw an xml error inside of the log, after installing msxml6 it
went away, but program did not work any better.
In the options of the program there are multiple interface designs you can use
(more or less skins/themes) like office 2007, system, visual studio 2003,
visual studio 2005. All of them have the same UI bug. I have tried the
standalone app of putty connection manager where you don't have to install
anything, and the installable version.
See attached redirect files
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22146
Summary: 64bit compatibility issue with Wine's MCI string
command parser
Product: Wine
Version: 1.0.0
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: winmm&mci
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hoehle(a)users.sourceforge.net
Created an attachment (id=27005)
--> (http://bugs.winehq.org/attachment.cgi?id=27005)
work in progress MCI parser that knows about 64bit structures
Hi,
Wine's MCI string command parser is one reason why test.winehq.org shows
failures with 64bit machines. I've created this issue so everybody can discuss
and contribute patches until evolution leads to a correct one.
The attached patch fixes part of what's currently in git, but it is still
incomplete. Therefore I don't plan to submit it.
I've run tests on WTB's 64bit machines that proove that MCI_STATUS_PARMS and
MCI_GETDEVCAPS indeeed process differently sized dwReturn types on x64:
DWORD_PTR and DWORD. That's what's missing from my patch.
A solution that sounds ideal is to define something like MCI_INTEGER64 and
change the resource files mciavi_res.rc and winmm_res.rc. Given that new type,
the MCI string parser would compute the correct offset.
I'd be very pleased if somebody could conform that MS does it this way and tell
us the value of this constant.
Another solution path is to special-case MCI_STATUS_PARMS in the parser, as it
uses the only 64bit construct I knew until 5 minutes ago (beside dwCallback of
course) that's not a LP(W)STR. HWND seems to be 32bit.
5 minutes later: What about HDC in MCI_DGV_UPDATE_PARMS? Wait, wtypes.h says
void*! The MCI string command parser needs to handle this type as well:
MCI_INTEGER as currently used in mciav_res.rc is not adequate on 64bit.
In the meantime, I'll submit a patch that adds MCI_HDC and a few other missing
defines I know to the includes.
Regards,
Jörg Höhle
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22533
Summary: Half Life: loading screen rendering is wrong
Product: Wine
Version: 1.1.43
Platform: x86-64
OS/Version: Linux
Status: NEW
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=27624)
--> (http://bugs.winehq.org/attachment.cgi?id=27624)
screenshot
See attached screenshot. Terminal output is minimal:
fixme:win:EnumDisplayDevicesW ((null),0,0x32e298,0x00000000), stub!
fixme:x11drv:X11DRV_desktop_SetCurrentMode Cannot change screen BPP from 32 to
16
fixme:mci:MCI_Break (0102) vkey 001B stub
ALSA lib ../../../src/pcm/pcm.c:7234:(snd_pcm_recover) underrun occured
fixme:mci:MCI_Break (0102) vkey 001B stub
ALSA lib ../../../src/pcm/pcm.c:7234:(snd_pcm_recover) underrun occured
fixme:win:LockWindowUpdate (0x30052), partial stub!
fixme:win:LockWindowUpdate ((nil)), partial stub!
fixme:win:LockWindowUpdate (0x30052), partial stub!
fixme:win:LockWindowUpdate ((nil)), partial stub!
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29458
Bug #: 29458
Summary: Explorer sometimes crashes on drag-and-drop in folders
accessed from "/
Product: Wine
Version: 1.3.35
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: RandomAccountName(a)mail.com
Classification: Unclassified
Builtin explorer sometimes crashes when attempting to drag-and-drop a file.
Other times, it doesn't allow this.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.