http://bugs.winehq.org/show_bug.cgi?id=25842
Summary: Autodesk Inventor 2008: Error at executing
RegisterJTTranslator.exe
Product: Wine
Version: 1.3.12
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
Created an attachment (id=32927)
--> (http://bugs.winehq.org/attachment.cgi?id=32927)
Error messages
Steps to reproduce:
1) remove ~/.wine
2) winetricks dotnet20
3) wine Setup32.exe
4) Next, next ,next ...
5) Uncheck all components that aren't Inventor
6) Next, next ,next ...
7) Components start to install
Behaviour:
I get lot of error windows (see attachment) at the end of installation. In the
image there is RegisterJTTranslator.exe. It is small file (16 KB) and is
probably designed to register JTTranslator.dll (284 KB). There are many of
those RegisterXXX.exe and every one fails.
Expected behaviour:
I shouldn't get any error.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25158
Summary: Keychamp 2.0 Crashes when launched
Product: Wine
Version: 1.2.1
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: koolblue3(a)gmail.com
Created an attachment (id=31911)
--> (http://bugs.winehq.org/attachment.cgi?id=31911)
Backtrace log for Keychamp 2.0 crash
Everytime I try to launch Keychamp 2.0 it crashes and pops up a box saying
"Unhandled exception: c0000005 At address: f7536cca." I have attached a
backtrace log.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22775
Summary: COD:MW2 crashes upon ALT-ENTER
Product: Wine
Version: 1.1.44
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
Just start COD:MW2, let it put up its initial screen, and press ALT-ENTER.
The screen will switch between fullscreen and windowed as expected,
but the game will then crash, e.g.
trace:d3d9:IDirect3DDevice9Impl_CreateTexture iface 0x198ef8, width 432, height
240, levels 1, usage 0, format 0x16, pool 0x1, texture 0x15e99060,
shared_handle (nil).
trace:d3d:device_context_add Adding context 0x213d4e28.
trace:d3d:context_create Successfully created new context 0x213d4e28
trace:d3d:context_enter Entering context 0x213d4e28, level 1.
trace:d3d:context_set_current Switching away from destroyed context 0x18bc5e60.
warn:d3d:context_validate DC 0x96c belongs to window 0x50160 instead of
0x30160.
trace:d3d:context_update_window Updating context 0x18bc5e60 window from 0x30160
to 0x9ad46d.
trace:d3d:context_destroy_fbo_entry Destroy FBO 3
trace:seh:raise_exception code=c0000005 flags=0 addr=0x132b1c ip=00132b1c
tid=0046
...
Unhandled exception: page fault on read access to 0x00000000 in 32-bit code
(0x00000000).
Backtrace:
=>0 0x00000000
1 context_set_current+0x56(ctx=0x401df3f0) [dlls/wined3d/context.c:932] in
wined3d
2 context_set_current+0x56(ctx=0x4868c720) [dlls/wined3d/context.c:932] in
wined3d
3 context_create+0x62e(swapchain=0x1c6450, target=0x16d8d5a8,
ds_format_desc=0x1bdc20) [dlls/wined3d/context.c:1387] in wined3d
4 swapchain_create_context_for_thread+0x36(iface=0x1c6450)
[dlls/wined3d/swapchain.c:960] in wined3d
5 context_acquire+0xfe(device=0x1c0028, target=0x45d17b38)
[dlls/wined3d/context.c:1785] in wined3d
6 wined3d_event_query_test+0x82(query=0x46bea318, device=0x1c0028)
[dlls/wined3d/query.c:62] in wined3d
7 IWineD3DEventQueryImpl_GetData+0x46(iface=0x46bea2f0, pData=0x1813e200,
dwSize=0x0004, dwGetDataFlags=0x0001) [dlls/wined3d/query.c:398] in wined3d
8 IDirect3DQuery9Impl_GetData+0x63(iface=0x46bea2d8, pData=0x1813e200,
dwSize=0x0004, dwGetDataFlags=0x0001) [dlls/d3d9/query.c:134] in d3d9
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22553
Summary: Running Digitech JUpdater GSP1101vC48.exe fails on
MacOS 10.5.8
Product: Wine
Version: 1.1.39
Platform: x86
OS/Version: Mac OS X 10.5
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: rtmd30(a)yahoo.com
I'm trying to run Digitech's "JUpdater GSP1101vC48.exe" on MacOS 10.5.8 and
getting the following set of verbiage:
Greg-MBP-wireless:Downloads greg$ wine JUpdater\ GSP1101vC48.exe
fixme:font:SetMapperFlags (0x67c, 0x00000000): stub - harmless
fixme:font:SetMapperFlags (0x750, 0x00000000): stub - harmless
fixme:font:SetMapperFlags (0x764, 0x00000000): stub - harmless
Port Name[0 0] DigiTech USB X-Edit
In Name[0] DigiTech GSP1101
Port Name[0 1] USB Audio Device
In Name[0] DigiTech GSP1101
Port Name[0 2] DigiTech GSP1101
In Name[0] DigiTech GSP1101
Found Port
fixme:midi:MIDIOut_LongData MOD_MIDIPORT
The "font" ones seem benign but the last one seems to keep the updater from
running to completion. I get an X-window that looks OK, but when I try to
update the device the software says no device was found.
Let me know if there's additional info I can gather for you.
Thanks.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21605
Summary: MINDApro fails to run (fbguard.exe crashes)
Product: Wine
Version: 1.1.37
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: allsymes(a)gmail.com
Created an attachment (id=26075)
--> (http://bugs.winehq.org/attachment.cgi?id=26075)
Terminal output from running
I have a software package called MINDApro. It installs under Wine, but when I
try to run it I get several error and crash messages. I know from running it on
Windows XP that I need to run the mlp_manager.exe program first, as this runs
the database server Firebird first (http://www.firebirdsql.org/).
I have attached the terminal output. The following is the sequence of error
messages that popup on running mlp_manager:
1. empty error popup.
2. "...mlp_manager.exe has encountered a serious problem and needs to
close...".
3. Title "Application Error", reads:
"Exception EExternalException in module ntdll.dll at 0002E8B8.
External exception C0000025."
4. Titled "Error", reads:
"""
An unexpected error has occurred. Please close MINDA software and restart. If
the error persists please contact MINDA on ...<snip>...
ERROR ISC ERROR CODE 335544721
ISC ERROR MESSAGE:
Unable to complete network request to host "localhost".
Failed to establish a connection.
unknown Win32 error 10061
"""
5. Titled "Error", reads: "Runtime error 217 at 0052B371"
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17888
Summary: CATIA V5R19: Documentation fails to install
Product: Wine
Version: 1.1.18
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
Created an attachment (id=20191)
--> (http://bugs.winehq.org/attachment.cgi?id=20191)
error after clicking install
I'm using Wine 1.1.18 (compiled from source using gcc version 4.3.2 20081105
(Red Hat 4.3.2-7) ) on Fedora 10 i386.
The problem is that documentation for CATIA V5R19 on CD doesn't want to
install.
Steps to reproduce:
1) install CATIA V5R19
2) run setup.exe from documentation cd
3) set default install and click install
4) get an error (attachment)
Terminal output:
D:\>copy "D:\INTEL\*.dll" "C:\windows\temp\TempDSUnloadDoc"
D:\>copy "D:\INTEL\*.exe" "C:\windows\temp\TempDSUnloadDoc"
D:\>copy "D:\install_data\pkgrel.txt" "C:\windows\temp\TempDSUnloadDoc"
D:\>copy "D:\install_data\*.bmp" "C:\windows\temp\TempDSUnloadDoc" /Y
CATCheckVC8Level Check : DI0PANV2.dll
VC8 Level OK
D: is my CD-ROM
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17118
Summary: Punch! Home Design AS4000: Open File Dialog does not
show files
Product: Wine
Version: 1.1.13
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: xyem(a)electricjungle.org
The "Open File" dialog does not show any files ( including ones supported by
the program such as *.PRO;*.PHD;*.PSH ) in the main view(?). It does show
directories, however.
Manually entering the file name in the "File name:" entry works without any
issue.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13357
Summary: Arcs do not render properly to printer from Altium DXP
2004 SP4
Product: Wine
Version: 1.0-rc1
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ninevoltz(a)metalink.net
When printing PC board artwork or schematic diagrams from Altium DXP 2004, arcs
are not rendered properly. The start and end points of the arc are in the wrong
places. I think it is related to the bug in gdi32 that I fixed some time ago
(bug ID 7421) because it looks just like that problem, only except it effects
printing instead of the screen. I'm not sure where print rendering is handled
in the API, or I would go after the bug myself.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13242
Summary: MS Office Communicator fails to start
Product: Wine
Version: 0.9.60
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wine(a)fales-lorenz.net
Until recently, it's not been possible to install MS Office Communicator 2005.
(Bug 12988 documents the installer problem). However, a fix has been recently
submitted for this and using that patche with a private wine build, I was able
to get MOC to install. However, when I attemnpt to run it, I get:
$ ./communicator.exe
fixme:netapi32:NetGetJoinInformation Stub (null) 0x33f7a8 0x33f788
fixme:winstation:OpenInputDesktop (0,0,2000000): stub
err:ole:CoGetClassObject class {f9b4bdee-7081-476e-a09c-bf54dc18f837} not
registered
err:ole:CoGetClassObject class {f9b4bdee-7081-476e-a09c-bf54dc18f837} not
registered
err:ole:create_server class {f9b4bdee-7081-476e-a09c-bf54dc18f837} not
registered
fixme:ole:CoGetClassObject CLSCTX_REMOTE_SERVER not supported
err:ole:CoGetClassObject no class object {f9b4bdee-7081-476e-a09c-bf54dc18f837}
could be created for context 0x17
fixme:ole:CoCreateInstance no instance created for interface
{659ecad9-a5c0-11d2-a440-00c04f795683} of class
{38639941-a780-4f5b-8017-8b361f9a29db}, hres is 0x80004002
$
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9993
Summary: Combit Addressmanager 13 trial can't load an icon
Product: Wine
Version: CVS/GIT
Platform: Other
URL: http://combit.net
OS/Version: other
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: wine-ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
On the way to bug 9992, the app spits out several errors like
fixme:ole:OLEPictureImpl_Load Unknown magic 0400, 2475 read bytes:
6c 74 00 00 00 00 00 00 00 04
52 e3 0b 91 8f ce 11 9d e3 00
...
Presumably some icon or other isn't loading properly.
Native dcom98 doesn't work with this app, fwiw.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.