http://bugs.winehq.org/show_bug.cgi?id=11173
Summary: 3ds max 2008 fails to install
Product: Wine
Version: CVS/GIT
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: msi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: xerox_xerox2000(a)yahoo.co.uk
So as i couldn't find 3ds max 7, i gave the 2008 trial version a try, but it
fails quite early:
err:msi:read_properties_from_data wrong type 64 != 30
There were also some mscoree related fixme's in the console, but they seem not
be the problem. I'll attach a screenshot of the error
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10787
Summary: Can't install 3ds max due to .net and direct x
Product: WineHQ Apps Database
Version: unspecified
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: website-bugs
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: josephjacir(a)hotmail.com
Created an attachment (id=9650)
--> (http://bugs.winehq.org/attachment.cgi?id=9650)
log file output by 3ds max 9 installer on install abort.
I'm new at reporting bugs so sorry if I've done anything incorrectly. Anyway:
I'm trying to install 3ds max 9 - the install invariably aborts when it gets to
the step where it tries to install .NET . Before it gets this far, it also
tries to install Direct X 9 but this failure doesn't cause it to abort. I've
attached the log that max output in C:\windows\temp\3dsMax9.log
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29310
Bug #: 29310
Summary: FirstClass Client 11.017 no login screen
Product: Wine
Version: 1.3.34
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jorgenqv(a)yahoo.com
Classification: Unclassified
Trying to get latest FirstClass client (FCC) to work in Wine 1.3.33/34
(ubuntu-wine-ppa-oneiric) with the following problems in Ubuntu 11.10 with
Unity. The same behavior in Ubuntu 10.04 LTS with Wine 1.3.31
(ubuntu-wine-ppa-lucid).
The FCC spash screen freezes when it starts. Normaly the login screen should
pop up. You then have to right-click on the upper panel FCC icon (splash then
disapear) and choose Connect. If you only click on the spash screen it
disapears.
This bug is separated from
http://bugs.winehq.org/show_bug.cgi?id=29150
as suggested in forum here:
http://forum.winehq.org/viewtopic.php?t=14283
/Jorgen
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34373
Bug #: 34373
Summary: application "AirScout" does not load with Wine
Product: WineHQ Apps Database
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: appdb-unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ik0oky(a)gmail.com
Classification: Unclassified
Once unfolded it cannot be loaded with Wine ver 1.6
The program can be downloaded here
http://www.dl0gth.de/software/airscout.zip
Can anybody help ?
Would love to run it with Wine in my Linux box (Ubuntu 12.04).
Thanks in advance for any tip or help to get it working.
Emilio
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33488
Bug #: 33488
Summary: Print Artist 4.0 (Win 3.11/95) installer doesn't show
up
Product: Wine
Version: 1.5.29
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: maikwagner(a)yahoo.com
Classification: Unclassified
Hello,
I am having problems getting an old copy of PrintArtist 4 to install. The AppDB
entry is at: http://appdb.winehq.org/objectManager.php?sClass=version&iId=5186
and my problem consists of that the installer seems to start up okay but
doesn't show up on my display. No error messages on console are shown and I can
hear the "Sierra-On-Line" installer sound. OS is openSUSE 64-Bit with wine
1.5.29 from repositories.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32036
Bug #: 32036
Summary: RSLogix5000 v16 Runtime Error
Product: Wine
Version: 1.5.15
Platform: x86
URL: http://http://www.rockwellautomation.com/rockwellsoftw
are/design/rslogix5000/demo.html
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: JosephHenryBlack(a)yahoo.co.nz
Classification: Unclassified
Created attachment 42224
--> http://bugs.winehq.org/attachment.cgi?id=42224
Rockwell Automation Software Setup.log text
wine-1.5.15-249-g8392a85
Note in link provided, version 17 is only available. v16 may be obtained from
Rockwell distributors if requested.
For those interested to play with RSLogix
setting oleaut32 to native will no longer install. With native dotnet1.1 it
gets a fair way.
This sometimes fails..
install of Rockwell Automation Drives PowerFlex 7 Module Profiles
[dvd path]\ENU\RSLogx5k\MP\RADrives\RADrives_PF7.msi
The terminal output near this time has
err:rpc:I_RpcGetBuffer no binding
SERVICE_NAME: RNADiagnosticsService
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 2 START_PENDING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
err:rpc:I_RpcReceive we got fault packet with status 0x3e6
fixme:msi:MsiOpenPackageExW dwOptions 00000001 not supported
snip
fixme:msi:MsiOpenPackageExW dwOptions 00000001 not supported
fixme:msi:load_progid Unknown class L"ECFA29AF-676B-49BD-AA7A-4489663D6B6C"
err:msi:iterate_load_verb Verb unable to find loaded extension L"dro"
or
err:ntdll:RtlpWaitForCriticalSection section 0x16c06c "bitblt.c: surface" wait
timed out in thread 001b, blocked by 001e, retrying (60 sec
err:seh:setup_exception_record stack overflow 824 bytes in thread 001b eip
b74b964d esp 00240ff8 stack 0x240000-0x241000-0x340000
snip
err:msi:iterate_load_verb Verb unable to find loaded extension L"dxc"
err:ntdll:RtlpWaitForCriticalSection section 0x1f67bc "bitblt.c: surface" wait
timed out in thread 0035, blocked by 003c, retrying (60 sec)
err:seh:setup_exception_record stack overflow 1504 bytes in thread 0035 eip
7bc3f6c8 esp 00240d50 stack 0x240000-0x241000-0x340000
But if it gets past this, it fails with:
This application has requested the Runtime to terminate it in an unusual way.
Install log files MPI.log:
MPSetup:Setup operations complete. Performed 26 operations of 26 scheduled
FactoryTalkActivationClient v2.log
InstallProduct return code for [FactoryTalk Activation Client v2.00.01] was 0
Rockwell Automation Software Setup.log
Installs Acrobat Reader 7 and then messes up the log file
CustomActionData 3: IMM_SUCCESS;C:\Program Files\Adobe\Acrobat
7.0\;Software\Adobe\Acrobat Reader\;
[mentions to defrag]
5;Optimizing performance ...;Completed [1]% of process;
NOTE: Installation was successful. However, because your hard drive is
fragmented, this application may not be able to launch as quickly as possib
[..]
1: DefragmentFiles 2: Defragmention process was invoked
[snip]
1: SetOptimizationStatus 2: Starting custom action 3: 4: 5:
1: SetOptimizationStatus 2: Ending custom action 3: 4: 5:
[and then the rest of the log is unreadable to the end of the file.. eg:]
\00-\00l\00e\00v\00e\00l\00 \00l\00o\00g\00:\00
\00I\00n\00v\00e\00n\00t\00o\00r\00y\00:\00 \00 \00 \00 \00
\00F\00e\00a\00t\00u\00r\00
I will try and add a terminal log later tonight but please let me know if I can
provide any other debug logs.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=31098
Bug #: 31098
Summary: 115 Udown can't work since I installed it
Product: Wine
Version: 1.5.3
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: litimetal(a)gmail.com
Classification: Unclassified
I downloaded http://pc.115.com/download/115UDown_3.2.8.15.exe then installed it
on my fedora 16.But I can't launch it and I know nothing about how to solve it.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30627
Bug #: 30627
Summary: Appending text to a large richedit is very slow
Product: Wine
Version: 1.5.3
Platform: x86
OS/Version: Linux
Status: NEW
Severity: enhancement
Priority: P2
Component: richedit
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
Classification: Unclassified
Although the pathological case reported in bug 30614 is now fixed,
all is not yet well.
When repeatedly appending lines, builtin riched20 starts out about 3x slower
than native, and at 40k lines, is about 10x slower than native.
This is painful for long-running apps that use richedit for verbose logs.
(Measured with the attached program and today's git on my i5,
appending 1000 lines to an empty richedit control takes
builtin hidden: 907 ms
builtin visible: 4862 ms
native hidden: 368 ms
native visible: 4530 ms
Appending 1000 lines to a richedit control which already contains 40000 lines
takes:
builtin hidden: 22169 ms
builtin visible: 33002 ms
native hidden: 1750 ms
native visible: 4807 ms )
Building wine's riched20 with -O1 -fno-inline and profiling with 'perf' shows
62.60% ME_WrapMarkedParagraphs
12.07% ME_PaintContent
9.99% ME_InvalidateMarkedParagraph
at 50k lines.
Initial inspection seems to show that most of the time in
ME_WrapMarkedParagraphs is in the function itself, not in any
called functions.
Adding trace statements to all callers of ME_WrapMarkedParagraphs, I see
one call during EM_EXSETSEL:
ME_Repaint Calling ME_WrapMarkedParagraphs
and four calls during EM_REPLACESEL:
ME_UpdateRepaint Calling ME_WrapMarkedParagraphs
ME_UpdateScrollBar Calling ME_WrapMarkedParagraphs
ME_Repaint Calling ME_WrapMarkedParagraphs
ME_UpdateScrollBar Calling ME_WrapMarkedParagraphs
This is the case whether the window is hidden or not.
Bug 13355 (which Dylan says is separate, since it's about richedit
being slow on a single large call to WM_SETTEXT) suggests in comment 14
ways to remove some redundant calls to ME_WrapMarkedParagraphs,
and to let one of them return early.
In addition to those ideas, for this bug, it would be useful if
ME_WrapMarkedParagraphs (and ME_InvalidateMarkedParagraph) could
avoid making a linear scan across all paragraphs.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26541
Summary: Dragon Saga doesn't start
Product: Wine
Version: 1.3.16
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
Installing DragonSagaInstaller-0.1.29-20110216.msi
went fine, but
$ cd ~/.wine/drive_c/Program Files/Gravity/Dragon Saga
$ wine Release/DragonSaga.EXE
fails like this:
fixme:ntdll:NtQueryInformationProcess (process=0xffffffff) Unimplemented
information class: ProcessDebugFlags
Unhandled exception: privileged instruction in 32-bit code (0x0123980c).
Backtrace:
=>0 0x0123980c in dragonsaga (+0xe4980c) (0x0032fea0)
1 0x7edaa2fc call_process_entry+0xb() in kernel32 (0x0032feb8)
2 0x7edac593 start_process+0x52(peb=0x1) [dlls/kernel32/process.c:1086] in
kernel32
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.