https://bugs.winehq.org/show_bug.cgi?id=39761
Bug ID: 39761
Summary: MDK (MDKDEM95.EXE) graphics not drawn
Product: Wine
Version: 1.8-rc3
Hardware: x86
OS: Mac OS X
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: jeffz(a)jeffz.name
Tested on OSX 10.9.5.
http://jeffz.name/mdkdemo_repack.tar.bz2
winecfg virtual desktop set to 640x480
cd ~/.wine/drive_c && tar xf ~/mdkdemo_repack.tar.bz2 && cd mdkdemo_repack
wine MDKDEM95.EXE
The game loads (as can be heard by the sounds after hitting enter a few times)
but nothing is ever drawn. There should be intro credits, main menu and
gameplay.
Confirmed that this bug does not happen on Windows 7. It works fine there.
Note: bug #39760 deals with the D3D version of the demo.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18234
Summary: Approach: Maximizing internalal minimized icon give
"About Wine"
Product: Wine
Version: 1.1.20
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ToddAndMargo(a)verizon.net
Created an attachment (id=20742)
--> (http://bugs.winehq.org/attachment.cgi?id=20742)
About wine instead of a maximized window
Hi All,
In Lotus Approach, if you use the internal windows control (the low set of
caption buttons) to minimize a single database, it will appear as an icon in
the lower right of Approach's window. If you double click on the icon to
maximize the window again, you get "About Wine 1.1.20" (and no maximized
window)
Many thanks,
-T
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18233
Summary: Approach underscore bar inactive with multiple database
open
Product: Wine
Version: 1.1.20
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ToddAndMargo(a)verizon.net
Hi All,
In Lotus Approach, when you have two or more databases open and have them
windowed (Windows --> cascaded, right-left, top-bottom) the underscore button
in the window's internal caption buttons, although showing (not grayed out),
does not work.
Many thanks,
-T
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40500
Bug ID: 40500
Summary: Scrap Mechanic : Unable to launch
Product: Wine
Version: 1.9.8
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: arionrina(a)verizon.net
Distribution: ---
Created attachment 54281
--> https://bugs.winehq.org/attachment.cgi?id=54281
Crash log
Scrap Mechanic doesn't open up the first window, then crashes.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42566
Bug ID: 42566
Summary: Edit control uses WM_PAINT instead of WM_ERASEBKGND
Product: Wine
Version: 2.0
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: user32
Assignee: wine-bugs(a)winehq.org
Reporter: james.tabor(a)reactos.org
Distribution: ---
Created attachment 57478
--> https://bugs.winehq.org/attachment.cgi?id=57478
Test Program
In Windows, the edit control uses the WM_ERASEBKGND message to erase the
background but the Wine edit control uses the WM_PAINT message. Test app
included..
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32334
Bug #: 32334
Summary: Microsoft SQL Server Management Studio Express 2005:
Connection window is too narrow
Product: Wine
Version: 1.5.18
Platform: x86
URL: http://www.microsoft.com/download/en/details.aspx?id=8
961
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: djelinski1(a)gmail.com
Classification: Unclassified
Regression SHA1: ebaf5ea17623268fb1c0f68b1cf9a5984bd4e46e
Created attachment 42678
--> http://bugs.winehq.org/attachment.cgi?id=42678
Screenshots of good and bad versions
Connection window that appears right after starting the application is too
narrow. You may notice that the bitmap on the top is clipped.
Regression testing points to the following commit:
ebaf5ea17623268fb1c0f68b1cf9a5984bd4e46e is the first bad commit
commit ebaf5ea17623268fb1c0f68b1cf9a5984bd4e46e
Author: Alexandre Julliard <julliard(a)winehq.org>
Date: Thu Nov 15 13:29:21 2012 +0100
gdi32: Don't load bitmap glyphs when using subpixel rendering in
GetGlyphOutline.
Reverting that commit on top of current git brings back correct behavior.
Prerequisite:
winetricks dotnet20 win7
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21864
Summary: Default paper size A4 instead of my printers default
Product: Wine
Version: 1.1.39
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ToddAndMargo(a)verizon.net
Created an attachment (id=26481)
--> (http://bugs.winehq.org/attachment.cgi?id=26481)
cups paper size
Hi All,
Would you guys fix this for me?
Word Pro, Note Pad Plus, all think my default printer is my Okidata B4350. And
it is. But, all new documents default to A4 as the paper size and it is not.
It is "Letter". Wine is not picking up the default paper size from my printer.
Many thanks,
-T
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32514
Bug #: 32514
Summary: Crash when executing Digit.Exe from Digit Magazine
(India)
Product: Wine
Version: 1.5.17
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: vikigoyal(a)gmail.com
Classification: Unclassified
Created attachment 42892
--> http://bugs.winehq.org/attachment.cgi?id=42892
Screen shot of list of files & folders on the Digit DVD
I run KDE in Fedora 17.
The Wine Packages & version installed at the moment on the system:
wine-wow-1.5.17-1.fc17.x86_64
mingw32-wine-gecko-1.8-1.fc17.noarch
wine-capi-1.5.17-1.fc17.x86_64
wine-fonts-1.5.17-1.fc17.noarch
wine-pulseaudio-1.5.17-1.fc17.i686
q4wine-0.121-3.fc17.x86_64
wine-filesystem-1.5.17-1.fc17.noarch
wine-ldap-1.5.17-1.fc17.i686
wine-alsa-1.5.17-1.fc17.x86_64
wine-mono-0.0.8-1.fc17.noarch
wine-twain-1.5.17-1.fc17.i686
wine-system-fonts-1.5.17-1.fc17.noarch
wine-systemd-1.5.17-1.fc17.noarch
wine-core-1.5.17-1.fc17.x86_64
wine-cms-1.5.17-1.fc17.x86_64
wine-core-1.5.17-1.fc17.i686
wine-1.5.17-1.fc17.x86_64
wine-debuginfo-1.5.17-1.fc17.x86_64
wine-tahoma-fonts-1.5.17-1.fc17.noarch
wine-ldap-1.5.17-1.fc17.x86_64
wine-desktop-1.5.17-1.fc17.noarch
wine-symbol-fonts-1.5.17-1.fc17.noarch
wine-pulseaudio-1.5.17-1.fc17.x86_64
wine-cms-1.5.17-1.fc17.i686
wine-small-fonts-1.5.17-1.fc17.noarch
wine-openal-1.5.17-1.fc17.i686
wine-docs-1.4-1.fc17.noarch
wine-common-1.5.17-1.fc17.noarch
wine-marlett-fonts-1.5.17-1.fc17.noarch
wine-capi-1.5.17-1.fc17.i686
wine-ms-sans-serif-fonts-1.5.17-1.fc17.noarch
wine-tahoma-fonts-system-1.5.17-1.fc17.noarch
wine-twain-1.5.17-1.fc17.x86_64
wine-courier-fonts-1.5.17-1.fc17.noarch
wine-openal-1.5.17-1.fc17.x86_64
mingw64-wine-gecko-1.8-1.fc17.noarch
I want to use a DVD supplied by a computer magazine called Digit in India
on my system just as it can be used on Windows.
For that I right clicked Digit.exe & selected 'Open With Wine' in Dolphin.
There was a crash. I want to supply the crash dump. I hope that dump proves
useful & changes be brought in Wine so that the DVD can run on Linux in Wine.
Thanks...
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38519
Bug ID: 38519
Summary: Some letters are cut in winecfg
Product: Wine
Version: 1.7.38
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: sworddragon2(a)aol.com
Distribution: ---
In the register "Drives" the columns "Letter" and "Target folder" are cutting
the last letter and in the register "Applications" the entry "Default Settings"
does cut the last letter too in the german translation if this register is
reentered.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=37084
Bug ID: 37084
Summary: An error occurred during the closing Wayward.exe
Product: Wine
Version: 1.7.22
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntdll
Assignee: wine-bugs(a)winehq.org
Reporter: stalkerandrei2010(a)mail.ru
Created attachment 49287
--> http://bugs.winehq.org/attachment.cgi?id=49287
Bug appeared when the application is closed
The application itself has not earned
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38774
Bug ID: 38774
Summary: Execute MS Excel 2007 macro crashes Excel
Product: Wine
Version: 1.6.2
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: florent.merlet(a)free.fr
Distribution: ---
Created attachment 51706
--> https://bugs.winehq.org/attachment.cgi?id=51706
Crash report of macro execution on Microsoft Excel 2007
The execution of a Excel Visual Basic Macro execution does not work when it is
compiled from Wine 1.6.2.
The compilation starts properly, and the window freezes after few seconds.
The macro tested works properly on windows 7.
There is no problem to modify, record the macro, and execute it from a MS
Windows 7 environment.
details :
Microsoft EXCEL 2007, installed
Windows 7 personal
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10349
Summary: Yukon Trail installer crashes at the end
Product: Wine
Version: 0.9.48.
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: wine-misc
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: echidnaman(a)gmail.com
Created an attachment (id=9017)
--> (http://bugs.winehq.org/attachment.cgi?id=9017)
Crash Log
After the Yukon Trail's installer is done installing, it crashes, taking the
file browser it spawns with it.
To reproduce:
-Run installer
-Complete installation
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39590
Bug ID: 39590
Summary: SAS 9.1.3 Portable not working - "No access to memory
location"
Product: Wine
Version: 1.7.55
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: n296869(a)rtrtr.com
Distribution: ---
Created attachment 52755
--> https://bugs.winehq.org/attachment.cgi?id=52755
LC_ALL=C WINEDEBUG=warn+all wine sas_9.1.3_portable.exe
Hello, we have to use SAS on my university, all students have license to use it
on personal computers, but it's distributed on like 10 CDs and it's horrible
pain to download and install properly even on Windows. I use Linux, so i want
to run it in wine. There are people that managed installing some versions of
SAS in wine, but i think it's not worth the effort even on windows.
Some great guy therefore made SAS Portable, which is (possibly illegal)
compilation of SAS directly executable as single exe file. You can download it
here http://uloz.to/xtKasDE/sas-9-1-3-portable-exe (if it's legal in your
country as it is in mine).
Can you please check why it does not work in wine? It works great on windows.
In wine it just shows popup saying "No access to memory location." and prints
following errors to terminal (see attachments for the same with wine debugging
enabled:
err:winediag:SECUR32_initNTLMSP ntlm_auth was not found or is outdated. Make
sure that ntlm_auth >= 3.0.25 is in your path. Usually, you can find it in the
winbind package of your distribution.
fixme:ntdll:NtRaiseHardError : stub. Errorstatus was c0000135
fixme:advapi:RegisterEventSourceA ((null),"SASEXE"): stub
fixme:advapi:RegisterEventSourceW (L"",L"SASEXE"): stub
fixme:advapi:ReportEventA
(0xcafe4242,0x0001,0x0000,0xc0000bb8,0x1633b8,0x0003,0x00000000,0x32e618,(nil)):
stub
fixme:advapi:ReportEventW
(0xcafe4242,0x0001,0x0000,0xc0000bb8,0x1633b8,0x0003,0x00000000,0x15fcc8,(nil)):
stub
err:eventlog:ReportEventW L"Unable to load host supervisor."
err:eventlog:ReportEventW L"C:\\Program Files\\SAS\\SAS 9.1\\sashost.dll"
err:eventlog:ReportEventW L"No access to memory location.\r\n"
fixme:advapi:DeregisterEventSource (0xcafe4242) stub
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24846
Summary: SecureCRT: Pop-up menu list flashes
Product: Wine
Version: 1.3.5
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
Created an attachment (id=31435)
--> (http://bugs.winehq.org/attachment.cgi?id=31435)
Image showing the problem
Steps to reproduce:
1) remove ~/.wine
2) winetricks gecko
2) install SecureCRT
3) wine SecureCRT.exe
4) unfold pop-up menu as shown in attachment
Behaviour:
Pop-up menu list flashes.
Expected behaviour:
Pop-up menu list shouldn't flash.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26503
Summary: modal windows don't stay on top
Product: Wine
Version: 1.3.15
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: c_pradelli(a)yahoo.com
Created an attachment (id=33743)
--> (http://bugs.winehq.org/attachment.cgi?id=33743)
Simple delphi program + source.
Under MS Windows these modal windows can be placed anywhere on the screen,
clicking the main window doesn't hide them. Not so under Wine: clicking the
main window puts it on top hiding the modal windows.
Ubuntu 10.04
Wine version 1.3.15
Demo from Khmelevskiy Alexandr is attached.
Open "bug21039.exe" then press "MessageBox" button.
Press main windows.
Messagebox goes behind main window an application hangup.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34516
Bug #: 34516
Summary: Terragen fails to start
Product: Wine
Version: 1.7.2
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
Classification: Unclassified
Created attachment 45946
--> http://bugs.winehq.org/attachment.cgi?id=45946
Terminal output on Wine 1.7.2
Steps to reproduce:
1) remove ~/.wine
2) install Terragen
3) wine tgd.exe
4) click "Use free version"
Behaviour:
Wine error.
Expected behaviour:
No Wine error.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32342
Bug #: 32342
Summary: PlanetSide2 Error message and bugreport.txt and
debug.log in Steam.
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: linards.liepins(a)gmail.com
Classification: Unclassified
Created attachment 42683
--> http://bugs.winehq.org/attachment.cgi?id=42683
PlanetSide2 bugreport.txt
Cannot run PlanetSide 2 on x64 Fedora 17. Popuing up three similar error log
message with attached bugreport. Also attached debug.log is generated in Steam
install dir.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32715
Bug #: 32715
Summary: Running of Linux Live USB causes kernel32 to blow up
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: kernel32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: raj(a)upadhyaya.com
Classification: Unclassified
Created attachment 43167
--> http://bugs.winehq.org/attachment.cgi?id=43167
Backtrace of blow up
I began testing Linux Live USB creator on Linux. I am running
wine version wine-1.5.18 installed via YUM on Fedora 18, using
the linux kernel 3.8.0-rc3 compiled from source from www.kernel.org.
What Linux Live USB does, is it creates a Live USB Linux USB thumb drive from
an ISO. I keep a Windows XP partition around to run this program. My hope is
to use Wine to run this program and create Linux thumb drives.
Live Linux USB should task Wine, as it looks for new updates and other
information from its web site.
Back Trace attached...
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22389
Summary: Text fields in dialog box remain highlighted in IDA
Pro (maybe other Borland VCL programs?)
Product: Wine
Version: 1.1.42
Platform: x86
URL: http://www.hex-rays.com/idapro/idadownfreeware.htm
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: markk(a)clara.co.uk
IDA Pro is an interactive disassembler. A freeware version can be downloaded
from http://www.hex-rays.com/idapro/idadownfreeware.htm
In some dialog boxes, when you press Tab to cycle to the next text box, text in
the previously-active box remains highlighted. It should not.
To demonstrate, download and install the freeware IDA Pro. Load any Windows
executable into it. Click to position the cursor over any label (e.g. start),
and press N to bring up the Rename address dialog box.
Initially, the Name field is highlighted. Press Tab. The "Maximum length of new
names" field is highlighted, but the Name field remains highlighted. Pressing
Tab again causes the "Local name prefix" field to also be highlighted, with the
previous two fields staying highlighted.
Apparently IDA Pro is built using the Borland VCL (Visual Component Library),
so perhaps this issue could affect other programs too.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30581
Bug #: 30581
Summary: Dialog windows can get hidden by the main window in
IDA Free 5.0
Product: Wine
Version: 1.5.3
Platform: x86
URL: http://www.hex-rays.com/products/ida/support/download_
freeware.shtml
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: markk(a)clara.co.uk
Classification: Unclassified
IDA Pro is an interactive disassembler. A freeware version of IDA 5.0 can be
downloaded from
http://www.hex-rays.com/products/ida/support/download_freeware.shtml
I tested IDA Free with Wine 1.5.3 under Lubuntu 11.10, which uses the Openbox
window manager.
When "Allow the window manager to control the windows" is enabled in winecfg,
dialog boxes can get hidden behind the main window. The dialogs are modal, so
the main window doesn't accept any input while a dialog is open. If you
accidentally click in the main window while a dialog is open, the dialog
disappears but the main window does not accept any input.
To reproduce:
- Use winecfg to disable virtual desktop mode and enable "Allow the window
manager to control the windows" if necessary; those are the default settings.
- Download and run the IDA Free 5.0 installer.
- Run the program. Click OK at the About dialog and Go in the Welcome to IDA!
window.
- The maximised main window opens. Bring up a dialog box, e.g. by selecting
Help-> About program... or File -> Open...
- When the dialog opens, click in the main window. The dialog window disappears
behind the main window. (You can reveal it by un-maximising the main window and
moving it out of the way.)
For what it's worth, this problem doesn't happen with the IDA Pro 6.2 demo, but
that uses different GUI code (QT?).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22522
Summary: black intro videos with smackw32.dll
Product: Wine
Version: 0.9.48.
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hoehle(a)users.sourceforge.net
"Der Dieb von Burg Schreckenstein" and "5 Freunde 2 und der silberne
Turm" start with a black screen when it should show an intro video.
Audio is played normally and the app proceeds to the main menu after
the video ends. Also, pressing a key aborts the video as expected.
The video is visible on a native XP machine.
Both apps use smackw32.dll to display the video. I suppose the screen
remains black because an exception is caught soon after start.
0009:CALL smackw32._SmackDoFrame@4(008c5440) ret=0049ef3d
0009:Call winmm.timeGetTime() [a few times]
0009:Ret winmm.timeGetTime()
0009:trace:seh:raise_exception code=c0000005 flags=0 (access violation)
...
0009:RET smackw32._SmackDoFrame@4() retval=00000000 ret=0049ef3d
The sequence of smackw32 calls is:
smackw32._SmackOpen@12
smackw32._SmackCheckCursor@20
smackw32._SmackToBuffer@28
smackw32._SmackDoFrame@4
The affected video is "intro.smk". Curiously, this is the second such
sequence. The first one, opening "loads.smk" produces no exception
(but it is too short to be a video). Surprisingly, Burg
Schreckenstein's ending credits extro_[1-7].smk are rendered (these
appear to be still images without animation).
Logs are available upon request. What channels?
You may add
[Smacker]
Debug=1
to win.ini and set WINEDEBUG=+debugstr.
I've not yet written an AppDB entry for either of these 2 children apps.
"5 Freunde" is Enid Blyton's "Famous 5" or "Club des cinq".
Bug present with both Ubuntu Intrepid and MacOS, on different HW and was
observed as early as wine-0.9.48 to present.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30579
Bug #: 30579
Summary: Main window does not regain focus after dialog closes
in IDA Free 5.0
Product: Wine
Version: 1.5.3
Platform: x86
URL: http://www.hex-rays.com/products/ida/support/download_
freeware.shtml
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: markk(a)clara.co.uk
Classification: Unclassified
IDA Pro is an interactive disassembler. A freeware version of IDA 5.0 can be
downloaded from
http://www.hex-rays.com/products/ida/support/download_freeware.shtml
I tested IDA Free with Wine 1.5.3 under Lubuntu 11.10 (which uses Openbox for
its window manager). This problem only seems to occur when Wine is *not* in
virtual desktop mode.
When viewing a disassembly, if you bring up a dialog box, when the dialog
closes the disassembly does not regain focus. So if you e.g. name a routine,
you then need to click to focus the disassembly before being able to use the
cursor up/down or page up/down keys to move the view.
To reproduce:
- Use winecfg to disable virtual desktop mode if necessary.
- Download and run the IDA Free 5.0 installer.
- Run the program.
- Click New in the Welcome to IDA! window.
- Select PE Executable and click OK.
- Choose a file to open: wingraph32.exe (which comes with the demo)
- Click Next, Next and Finish in the PE Executable file loading Wizard.
- The disassembly view shows the WinMain routine.
- The disassembly has focus, so you can use the cursor keys and PgUp/PgDn to
move in it.
- Move the cursor, either with keyboard or by clicking the mouse, over a
referenced location (e.g. unk_4CC100 or unk_4BE65C).
- Press N to open the Rename address dialog.
- Type something for the name, e.g. blahblahblah and press return.
- The disassembly does not regain focus, so pressing cursor keys to move has no
effect. You need to click in the disassembly so it regains focus.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16183
Summary: Popup text is immediately overwritten by background in
IDA Pro
Product: Wine
Version: 1.1.9
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: markk(a)clara.co.uk
IDA Pro is an interactive disassembler. A freeware version can be downloaded
from http://www.hex-rays.com/idapro/idadownfreeware.htm
When viewing a disassembly, if you hover the mouse pointer over a reference to
another location, a view of the instructions at that location pops up next to
the mouse pointer. You can increase and decrease its height by moving the mouse
wheel.
In Wine this does not work properly. The pop-up display is blank (just the
background colour). Moving the mouse wheel, you can see the text that should be
there, but it is immediately overwritten by the background colour.
To reproduce: download and install IDA Pro freeware version. Run the program
and open a Windows executable. Move the pointer over a reference to another
location in the program and wait for the pop-up display. Notice it is blank.
Move the mouse wheel and (hopefully) see the text being rendered but
immediately overwritten.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39762
Bug ID: 39762
Summary: wine iexplore cyscape.com/showbrow.asp does not load
Product: Wine
Version: 1.7.55
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: the.ideals(a)gmail.com
Distribution: ---
Created attachment 53042
--> https://bugs.winehq.org/attachment.cgi?id=53042
run log
wine iexplore cyscape.com/showbrow.asp
iexplore doesn't go further than notifying the below.
"Performing an extensive browser test. Please wait... "
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40835
Bug ID: 40835
Summary: PulseAudio support with NetBSD
Product: Wine
Version: 1.9.12
Hardware: x86
OS: NetBSD
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: winepulse.drv
Assignee: wine-bugs(a)winehq.org
Reporter: adrien_fernandes2(a)hotmail.com
Created attachment 54798
--> https://bugs.winehq.org/attachment.cgi?id=54798
Output of the compilation
Hello,
I am making a package from scratch for NetBSD using pkgsrc so my objective is
to make it fully functional whatever the user wants to use (thanks to options).
Everything is perfect EXCEPT for a problem when building with PulseAudio
support.
NetBSD 7.0.1 (GENERIC.201605221355Z) i386
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30583
Bug #: 30583
Summary: keyboard input does not work after focus-out and
focus-in
Product: Wine
Version: unspecified
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hramrach(a)gmail.com
Classification: Unclassified
Since upgrade to wine 1.4-rc6 keyboard input does not work after focus is lost
and restored.
0) switch to focus-follows-mouse
1) run notepad
2) enter some text
3) point to another window and back to notepad
4) type
no text appears.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37896
Bug ID: 37896
Summary: EM_SETPASSWORDCHAR ineffective when edit control does
not have WS_BORDER set
Product: Wine
Version: 1.7.33
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: user32
Assignee: wine-bugs(a)winehq.org
Reporter: winehq-bugzilla(a)richardpayne.name
Distribution: ---
I have two identical edit controls with ES_PASSWORD set via EM_SETPASSWORDCHAR.
Identical, that is, apart from 1 having WS_BORDER set and the other not.
The one without WS_BORDER does not conceal its contents as it should when a
password char is specified. The one with WS_BORDER set works as expected.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38786
Bug ID: 38786
Summary: An EXE that only creates a WS_EX_TOOLWINDOW window
isn't given focus (or returned focus).
Product: Wine
Version: 1.7.38
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: jasonwinter(a)hotmail.com
Distribution: ---
It seems only WS_EX_APPWINDOW windows are given focus by Wine on application
startup (I.E. windows that have a taskbar button).
Windows that do not appear in the taskbar are not given focus by Wine when an
application is started. Additionally, if the user gives focus to that window
using the mouse, things like MessageBox (I.E. another window that takes focus)
do not return focus to a tool-window that last had focus. Instead, focus is
only returned to the last window which had focus and also has a taskbar button.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40255
Bug ID: 40255
Summary: Cannot delete or modify 1Password items
Product: Wine
Version: 1.9.4
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: jhessin(a)gmail.com
Distribution: ---
While using 1Password ver. 4.6.0.604 I am unable to delete or modify any
passwords in my shared vault. The vault works perfectly fine on my windows
computer. This is the error report generated by the application: NOTE: personal
information has been removed.
Application:
> -------------------------------------------------------
> 1.1 Start Date : Sat, 5 Mar 2016 09:11:42 -0700
> 1.2 Name/Description: 1Password.exe - (1Password)
> 1.3 Version Number : 4.6.0.604
> 1.4 Parameters :
> 1.5 Compilation Date: Tue, 23 Feb 2016 13:07:31 -0700
> 1.6 Up Time : 1 minute, 5 seconds
>
> Exception:
> --------------------------------------------------------------------------
> ------------------------------------- 2.1 Date : Sat, 5 Mar
> 2016 09:12:48 -0700 2.2 Address : 005F3654
> 2.3 Module Name : 1Password.exe - (1Password)
> 2.4 Module Version: 4.6.0.604
> 2.5 Type : EAccessViolation
> 2.6 Message : Access violation at address 005F3654 in module
> '1Password.exe'. Read of address 00000004.
> 2.7 ID : 1001
> 2.8 Count : 1
> 2.9 Status : New
> 2.10 Note :
>
> Active Controls:
> ----------------------------------------------
> 4.1 Form Class : TFrm1pMain
> 4.2 Form Text : 1Password
> 4.3 Control Class: TTntListView.UnicodeClass
> 4.4 Control Text :
>
> Computer:
> -------------------------------------------------------
> 5.1 Name : #########
> 5.2 Total Memory : 3097 Mb
> 5.3 Free Memory : 1739 Mb
> 5.4 Total Disk : 913.32 Gb
> 5.5 Free Disk : 821.71 Gb
> 5.6 System Up Time: 2 hours, 1 minute, 38 seconds
> 5.7 Processor : Intel(R) Pentium(R) 4 CPU 2.40GHz
> 5.8 Display Mode : 1366 x 768, 32 bit
> 5.9 Display DPI : 96
> 5.10 Video Card : X11 Windowing System (driver )
> 5.11 Printer :
>
> Operating System:
> ---------------------------------------------
> 6.1 Type : Microsoft Windows XP (64 bit)
> 6.2 Build # : 3790
> 6.3 Update : Service Pack 2
> 6.4 Language: English
> 6.5 Charset : 0
>
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37132
Bug ID: 37132
Summary: Clang Static Analyzer: Uninitialized array item
Product: Wine
Version: 1.7.22
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: lukebenes(a)hotmail.com
Clang Static Analyzer identifies Uninitialized array item
File: dlls/avifil32/api.c
Location: line 1753, column 10
Description: Assigned value is garbage or undefined
#define MAX_AVISTREAMS 8
...
HRESULT WINAPI AVISaveVW(....int nStreams ....)
{
...
//Declaring 8-item array, [0..7]
PAVISTREAM pInStreams[MAX_AVISTREAMS];
...
if (nStreams >= MAX_AVISTREAMS) {
WARN(...);
return AVIERR_INTERNAL;
}
...
//Initializing first 7 items, [0..6].
for (curStream = 0; curStream < nStreams; curStream++) {
pInStreams[curStream] = NULL;
pOutStreams[curStream] = NULL;
}
...
for (curStream = 0; curStream < nStreams; curStream++) {
...
if (curStream + 1 >= nStreams) {
/* move the others one up */
PAVISTREAM *ppas = &pInStreams[curStream];
int n = nStreams - (curStream + 1);
do {
*ppas = pInStreams[curStream + 1];
//Clang: Assigned value is garbage or undefined
} while (--n);
}
...
}
...
}
In this code, an array of 8 items is declared. The code will continue executing
as long as the nStreams variable is less than 8, i.e. 7 at most. All the loops
in this function with the conditional statement (curStream < nStreams) fail to
iterate through the last item, both before its initialization and when using
it. The line Clang displayed the message on is just that very line where the
eighth item with the index 7 is taken, as the (curStream + 1 >= nStreams)
condition will be true at curStream==6 and nStreams==7. Addressing the
pInStreams[curStream + 1] array will give us the last, previously uninitialized
item.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34758
Bug #: 34758
Summary: Unhandled exception: divide by zero in 32-bit code
(0x7eabe0ee). under unbuntu 12.04 wine 1.6
Product: Wine
Version: unspecified
Platform: x86-64
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: Francis.Bougron(a)free.fr
Classification: Unclassified
Created attachment 46350
--> http://bugs.winehq.org/attachment.cgi?id=46350
Trace of debugger
This happens when starting "Microsoft money97 5.0.
I see bugs 33886 34451 300082.
It is probably the same thing.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42298
Bug ID: 42298
Summary: err:clipboard:convert_selection Timed out waiting for
SelectionNotify event
Product: Wine
Version: 2.0-rc6
Hardware: x86-64
OS: Linux
Status: NEW
Severity: trivial
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: 00cpxxx(a)gmail.com
Distribution: Debian
Although I'm a fan of the "console messages are not bugs" this is a little
annoying, it can repeat several times. Happens under heavy CPU/IO usage and
will repeat until CPU/IO goes back to "normal", this is the impression I have,
it could be something else.
It is sort of easy to reproduce and it is NOT present since the patch that
moved stuff ( http://source.winehq.org/git/wine.git/commitdiff/7d0ddff2 ), it
was something that was changed later I believe started less than 2 months ago.
I can try bisecting but it will take some time so if anybody (Julliard) has a
hint it will be better.
Am I the only affected?
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37948
Bug ID: 37948
Summary: EVE Launcher crashes when importing/exporting patches
Product: Wine
Version: 1.7.33
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: alex_y_xu(a)yahoo.ca
Distribution: Gentoo
Created attachment 50555
--> https://bugs.winehq.org/attachment.cgi?id=50555
Wine backtrace
Steps to reproduce:
Step 1: wine eve.exe
Step 2: Press gear icon, go to Patches.
Step 3: Press Import or Export.
Expected results:
Dialog opens.
Actual results:
Launcher crashes.
The bug can be reproduced after installing EVE without a subscription
(http://www.eveonline.com/), but it is quite a large download (~5 GB).
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42492
Bug ID: 42492
Summary: EVE Online cannot be started
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: tomsk.slovak(a)gmail.com
Distribution: ---
Created attachment 57358
--> https://bugs.winehq.org/attachment.cgi?id=57358
Crash log from EVE Online
After start EVE Online launcher, it crash.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42295
Bug ID: 42295
Summary: Loaded TurboCAD Delux 2D/3D into WINE. Appeared to
load normally, but when attempted to run program
received a critical error problem and the program shut
down. Attached is the back trace that was provided.
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: rsmach.rl(a)gmail.com
Distribution: ---
Created attachment 57016
--> https://bugs.winehq.org/attachment.cgi?id=57016
Report or error occurance that was generated when attempting to run the
program.
The program is set to run in a Windows 7 environment and was attempting to run
in Wine. The program is a computer aided design, TurboCAD Deluxe 2D/3D v. 20.
Loading of the program went smoothly but a critical error occurs when the
program is started,
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18562
Summary: foxtrader crash with page fault (regression)
Product: Wine
Version: 1.1.21
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: xrfang(a)gmail.com
Created an attachment (id=21225)
--> (http://bugs.winehq.org/attachment.cgi?id=21225)
log messages
FoxTrader (http://wizard.stock.hexun.com/webtornado/download/SetupGold.exe)
crashes with page fault, please see log.
Note
1. This is a regression
2. The program is Chinese, and it needs MFC42.DLL.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41157
Bug ID: 41157
Summary: DX11 game "Heretics" crashes with an error message
after game menu is loaded
Product: Wine
Version: 1.9.16
Hardware: x86
OS: Windows
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: svyatpro(a)gmail.com
Created attachment 55378
--> https://bugs.winehq.org/attachment.cgi?id=55378
Heretics crash screenshot
When you run "Heretics" using WineD3D on Windows you recieve an error message.
Here is a link where you can find Heretics binaries and sources.
https://zachhoefler.com/portfolio/heretics/
Can somebody test it on Linux?
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41919
Bug ID: 41919
Summary: Regression : impossible to finish installation of
Indiana Jones The Original Trilogy
Product: Wine
Version: 1.9.24
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: fevrier.simon(a)gmail.com
Distribution: Ubuntu
Ubuntu 16.10
It seems the regression appear between Wine 1.7.18 and 1.7.29.
Normally, no problem
Regression : a pop up window say "Insert the disk : 1" but the disk is inserted
Nothing different between versions in the poor logs.
The regression page say to test with the latest code. I will try but I don't
think it will be useful. For a "git bisect" method : too expensive for my
computer, but I will try to have a look at the commits' information.
It doesn't work In wine 1.9.24.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40994
Bug ID: 40994
Summary: Exits only from pull-down menu, then reports error.
Product: Wine
Version: 1.9.14
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: leslarkin(a)aim.com
Distribution: ---
Created attachment 55155
--> https://bugs.winehq.org/attachment.cgi?id=55155
Program error dump after program exit
I can't exit by clicking on the 'x' in the red circle in the upper left corner
of the app window. I also can't exit by right-clicking on the Wine icon in my
Launcher bar, and clicking 'Quit'. The only way to exit is by clicking the
app's 'Settings' pull-down menu, then clicking 'Exit'.
After an apparently successful exit, I get an error window with the attached
bactrace.txt file.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42721
Bug ID: 42721
Summary: Freezing
Product: Wine
Version: unspecified
Hardware: Other
OS: Mac OS X
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: marshall.lee.feather(a)gmail.com
Created attachment 57701
--> https://bugs.winehq.org/attachment.cgi?id=57701
the log it gives displays to me when it freezes up
about on average it freezes up 4 or five times a day during a 10 hr play. and
then this box pops up giving me info which i uploaded below. This started just
in the last week. have been playing for a year on same systems. Thanks guys
for all the hard work you put into this game for us. just hope i can play more
without more problems.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42610
Bug ID: 42610
Summary: EVE-Online crashes
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: m4xch3(a)gmail.com
Created attachment 57555
--> https://bugs.winehq.org/attachment.cgi?id=57555
This is bureport from the game
Periodically, during the game, the client falls. This often happens when
loading a large number of ships and departing from the station or with the
rapid opening of gaming windows.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37780
Bug ID: 37780
Summary: After running a bash script from cmd, no prompt is
printed
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: cmd
Assignee: wine-bugs(a)winehq.org
Reporter: gm89(a)hotmail.it
Distribution: ---
If I run a bash script from wine's cmd, after execution the prompt is not
printed.
I believe this is the cause of an hang in my use case, I'm trying to interface
a windows program with my android phone by making it use the native adb binary;
the trick I used was to replace the provided "adb.exe" with a similarly named
bash script with this content:
#!/bin/bash
/usr/bin/adb $*
If I manually call adb.exe from cmd, the output of commands is correct but no
prompt is printed afterwards.
Tested with wine 1.7.33 under ubuntu 14.04.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42741
Bug ID: 42741
Summary: StarCraft I: 1.18 PTR fails to initialize
ClientSdk.dll
Product: Wine
Version: 2.4
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: li.davidm96(a)gmail.com
Distribution: ---
Created attachment 57743
--> https://bugs.winehq.org/attachment.cgi?id=57743
stderr output of Wine when running StarCraft.exe
The 1.18 public test release of the upcoming version of StarCraft I does not
launch, as ClientSdk.dll fails to initialize.
Tested with Wine 2.4 (latest from Arch repositories), in a fresh 64-bit
wineprefix. Architecture is AMD64.
The download is here:
https://us.battle.net/forums/en/starcraft/topic/20753915707
sha1sum:
2d6702a425f13659227814fbc903568d63daeb08
/home/lidavidm/Downloads/Starcraft+1.18+PTR+1202.zip
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38909
Bug ID: 38909
Summary: Notepad corrupts files saved as utf-8 without a byte
order mark (BOM)
Product: Wine
Version: 1.1.19
Hardware: x86
OS: Linux
Status: NEW
Keywords: download, source
Severity: minor
Priority: P2
Component: programs
Assignee: wine-bugs(a)winehq.org
Reporter: austinenglish(a)gmail.com
Distribution: ---
Created attachment 51843
--> https://bugs.winehq.org/attachment.cgi?id=51843
screenshot
See attached screenshot and test files (from bug 18191).
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22080
Summary: Wine removes custom drive mappings
Product: Wine
Version: 1.1.40
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: sub.mesa(a)gmail.com
Wine appears to be forgetting or removing my drive mappings. I have an NFS
filesystem mouned on /nfs, i am the owner of that directory with appropriate
write permissions. I do something like this:
# create new wine directory
mkdir /nfs/winetest
# populate wine directory
WINEPREFIX=/nfs/winetest/ winecfg
# Now i go to Drives tab, make a new D-drive, set it to /nfs, then click Apply
# close winecfg
# when i launch winecfg again, the /nfs D-drive is still there
# so far so good
# now launch some random application on the NFS-mount
cd /nfs/
WINEPREFIX=/nfs/winetest/ wine "D:\\prip\\setup.exe"
# result: wine: module not found; application does not start properly
# now check winecfg again:
WINEPREFIX=/nfs/winetest/ winecfg
# now our D-drive mapping isn't set to anything; its empty.
So it appears wine removes my custom drive mappings whenever an application is
launched or tries to access its DLLs located there. If i did something wrong,
i'm not aware of it. Wine should just accept the D-drive and launch the
application, not removing my drive mapping.
I also tested without using NFS; on my home directory.
mkdir ~/winetest
mkdir ~/driveD
WINEPREFIX=/home/<user>/winetest winecfg
# set drive D to map to /home/<user>/driveD/ type Local Disk
# click apply & close winecfg
cp -p ~/nfs/prip/setup.exe ~/driveD/
WINEPREFIX=/home/<user>/winetest/ wine "D:\\setup.exe"
# result: fails again, drive D gone.
I'm using Ubuntu 9.10 64-bit, wine 1.1.40 per winehq.org PPA; no modifications.
The latest .41 versions is not in your PPA yet, so i can't test. Can anyone
confirm this bug?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21855
Summary: WordPro Windows pull down does not show file names
Product: Wine
Version: 1.1.38
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P4
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ToddAndMargo(a)verizon.net
Created an attachment (id=26459)
--> (http://bugs.winehq.org/attachment.cgi?id=26459)
Missing file names in Windows pull down
Hi All,
Would you guys fix this for me?
I am using Lotus Word Pro N9.8.0208.1200. When you open two files (documents)
from the command line (the jpeg I have attached), then go to the "Window" pull
down to select which file to bring into focus, the file names are missing. If
you start Word Pro, then use File, Open to select two files, one at a time, the
second file does not show.
Many thanks,
-T
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42232
Bug ID: 42232
Summary: Sort version list by version number
Product: WineHQ Apps Database
Version: unspecified
Hardware: x86
URL: https://appdb.winehq.org/objectManager.php?sClass=appl
ication&iId=13986
OS: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: appdb-unknown
Assignee: wine-bugs(a)winehq.org
Reporter: cges30901(a)gmail.com
Distribution: ---
Versions of LINE (Powered by Naver) is not sorted correctly. Version 4.10.x.x
and 4.11.x.x is not at the bottom of the list. I guess this is because '1' in
10 is less than '3'?
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37541
Bug ID: 37541
Summary: Request for Enhancement: first time opening a program,
give the window some size
Product: Wine
Version: 1.7.30
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: ToddAndMargo(a)zoho.com
Distribution: ---
Created attachment 49957
--> https://bugs.winehq.org/attachment.cgi?id=49957
first window
Hi All,
Wine 1.7.30 and Smart Suite.
Request for Enhancement:
Currently the first time you open a window (like Word Pro), the window has
horizontal length, but no vertical length, just the decoration bar.
The decoration says you are in Windowed mode. If you click on the Window mode
decoration, you get a full screen window. Click again and you just get the
decoration bar back.
This is really confusing as your thing you have click on the "roll up / roll
down" in the upper left of the decoration. The tip off that you did not, is
the arrow is pointing up. (That doesn't stop yo from clicking it anyway.)
The cure is to drag the line at the bottom of decoration downward, then you get
a windowed window back. That is unless the Role Up/Down arrow is now pointing
down from your clicking on it.
This is really confusing. Makes you think Wine is broken (again).
Would your please consider giving the first time a windows is open some size?
I have attached a picture of what the weird opening screen looks like.
Many thanks,
-T
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40762
Bug ID: 40762
Summary: Approach 97: Error Message When Opening From Network
Path
Product: Wine
Version: 1.9.11
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: crashdance(a)charter.net
Distribution: Mint
When opening a database (APR) file from a CIFS mapped Windows network share
using a drive letter in dosdevices Approach fails to open the file. The error
message is "Cannot open database "Z:\examplefile.dbf" because it is encrypted."
This problem persists regardless of the compatibility mode in the Wine config.
The program works correctly in a modern version of Windows and a Windows
virtual machine connected to the same LAN.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.