http://bugs.winehq.org/show_bug.cgi?id=34227
Bug #: 34227
Summary: AVR Studio 4.19 (build 730) fails to communicate with
programmer
Product: Wine
Version: 1.6
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ghieber(a)fastmail.net
Classification: Unclassified
Created attachment 45542
--> http://bugs.winehq.org/attachment.cgi?id=45542
screen shots and log file
AVR Studio can control a variety of programmers and in-circuit-emulators. While
the programming part could be worked around by using AVRDude or comparable
applications, emulation can't.
I have two of the oldest supported devices, an Atmel STK500 evaluation board,
and a (not original) JTAGICE programmer / emulator. Basic communication with
both devices works. The JTAGICE can not be further testet due to lack of a
suitable target. The STK500 behaves as follows:
connecting to the board (Tools > Program AVR > Connect, then click Connect)
opens the STK500 dialog, Tab 1. screen shot 1. The lower panel indicates that
communication is established. trying to transfer any data, for example by
clicking the "read Signature" button results in the error message, screen shot
2. The same when clicking the "Fuses" tab, screen shot 3.
the attached log contains a session consisting of starting up AVR Studio,
connecting to the STK500 and trying the described read operations. All the
output came during startup, except the last 4 lines, 2 of them are written when
the error message pops up
The bug appears under Wine 1.6, Wine 1.7 and Crossover 12.2.1. Operating system
is Fedora19 / 64.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34201
Bug #: 34201
Summary: Mp3Tag: Displayed list contents not automatically
updated on certain changes
Product: Wine
Version: 1.7.0
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: tastky(a)gmail.com
Classification: Unclassified
Created attachment 45505
--> http://bugs.winehq.org/attachment.cgi?id=45505
Track ordering only switched back partially from inverse one
Two kinds of issues that cause the displayed list content not being updated
properly — unless I actively select a line or drag the window part containing
the list outside of the X-Servers displayed space.
With manual line selection, only that line is updated. With dragging, if I do
that so that only certain lines / a part of a line is outside that space, the
visible content on dragging it back into full view is only updated to that
extent. Sometimes only the manual selection works.
Issue 1: On Mp3Tag's main list, use the mouse to change column dimensions
and/or drag a column header to switch the column ordering.
Issue 2: Switching ordering by pressing on a column header on Mp3Tag's main
list works fine, but switching it eg. in the "List of search results…" and
"Adjust tag information" and windows leads to similar improperly updated
display.
To reproduce Issue 2:
1. Have at least one file in the main list, select any.
2. Press "Tag Sources" and select any source & any search result with more
than one line.
3. Change ordering by pressing a column header either on that window or the one
called by pressing "Next >".
Mp3Tag 2.57, Wine 1.7.0 (consistent throughout each versions since I started
using both together, some 2-3 years ago)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16873
Summary: Capella 2008 hangs when clicking on virtual keyboard
Product: Wine
Version: 1.1.12
Platform: Other
URL: http://www.capella.de/download_capella.htm
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: josh(a)stack.nl
While checking bug 1567 (see there for startup issues), I noticed the
following:
Download the 2008 capella demo from the website and install it. When you get
beyond the splash screen and click on one of the keys of the virtual keyboard,
the application appears to enter an infinite loop. The mouse cursor inside the
keyboard window flashes between the hourglass and normal cursor and the
application does not respond any more.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19062
Summary: Wine link in favorites
Product: Wine
Version: 1.1.24
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: Eldmannen+wine(a)gmail.com
Windows comes with some pre-set favorites in C:\users\Alice\Favorites\ to the
Microsoft website, and related such.
Wine can have a link to the Wine website in /users/Alice/Favorites/
It should be .url files.
I've attached a Wine.url file, that could be placed in
/users/Alice/Favorites/Wine.url
We could also have a link to the bugzilla, wiki, appdb, forums, etc.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=20438
Summary: CallWave: Fails to start if in Window XP mode.
Product: Wine
Version: 1.1.31
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gaming4jc2(a)yahoo.com
Created an attachment (id=24270)
--> (http://bugs.winehq.org/attachment.cgi?id=24270)
Wine Bugs and Error Prompts from IAM.exe
This is just a more or less minor issue I have. CallWave works perfectly (with
the exception of not being able to play back recordings inside the program) on
Windows 98 mode. Yet when I use the normal Windows XP mode it fails to even
start and produces numerous errors. Attached is the wine bugs, and two prompts
given by IAM.exe. Keep in mind it's not a CallWave issue since it works
perfectly on a real Windows XP out of the box.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34434
Bug #: 34434
Summary: D&C Scheme Editor 5: Black menu
Product: Wine
Version: 1.7.0
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
Classification: Unclassified
Created attachment 45842
--> http://bugs.winehq.org/attachment.cgi?id=45842
Image shownig black rectangle
Steps to reproduce:
1) remove ~/.wine
2) winetricks dotnet40 corefonts
3) install D&C Scheme Editor 5
4) start D&C Scheme Editor 5
5) unfold help menu
Behaviour:
Black rectangle.
Expected behaviour:
No black rectangle.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30587
Bug #: 30587
Summary: Office 2007 apps (Word, Powerpoint) cannot be
maximized after being unmaximized by window manager
Product: Wine
Version: 1.5.3
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: adman.com(a)gmail.com
Classification: Unclassified
Tested with Wine 1.5.3, Ubuntu 12.04 LTS x64 from Wine PPA Package version
1.5.3-0ubuntu1~ppa1~precise4+pulse17.
To reproduce:
1. Open Word 2007 or Powerpoint 2007
2. Maximize the window using the Word/Powerpoint maximize button in the
upper-right corner.
3. Unmaximize using the same button
4. Maximize the window again using the same button
5. Unmaximize the window using the window manager (e.g. in the unity global
menu use the unmaximize button, or in Gnome's window list, right click and
choose unmaximize)
6. Window cannot be maximized anymore with the maximize button.
Also, doing the same but swapping the office button with the wm button in all
steps results in a window that can't be unmaximized.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34723
Bug #: 34723
Summary: Resident Evil 3: changing settings during the game
results in a crash
Product: Wine
Version: 1.7.4
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: winebugs140(a)gmail.com
Classification: Unclassified
Created attachment 46297
--> http://bugs.winehq.org/attachment.cgi?id=46297
RE3 log+error
If you press F5 during the game to change some settings and then you confirm or
cancel your choice, the program crashes.
The problem can be reproduced in the demo (check out the link).
Tested with:
Windows Vista (without Wine), GeForce 9600M GS--the program works fine here
Ubuntu 13.04, GeForce 9600M GS (NVIDIA driver 313)
Mac OS X 10.7.5, ATI HD 2600 Pro, Mac Driver/X11
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35925
Bug ID: 35925
Summary: fbo bailing out on context_set_gl_context
Product: Wine
Version: 1.7.1
Hardware: x86-64
URL: http://appdb.winehq.org/objectManager.php?sClass=versi
on&iId=30117
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: royceremer(a)gmail.com
This has the exact same symptom as bugid#24067, which uses the same engine, but
I do not believe this is a regression. I believe bugid#26802 may be a
duplicate, although it's triggered by a different engine, and there isn't
enough detail in that bug for me to be certain.
Using orm=fbo, all model textures are invisible in Age of Wonders 3. Objects in
the screenshots attached are only visible due to ambient occlusion and
reflective effects on the surfaces.
Using orm=backbuffer makes models appear solid, but loses many effects and is
slow. (picture attached)
Basically, no matter what winetricks or wine version I use, this engine will
bail out here:
https://github.com/mirrors/wine/blob/master/dlls/wined3d/context.c#L769
... for completeness, I have duplicated the bug under the following additional
conditions with a fresh wine prefix for each trial:
---wine1.7.1---
- d3dx9_43, d3dcompiler_43
- d3dx9_43, d3dcompiler_43, WINEARCH=win32
- d3dx9_43, d3dcompiler_43, WINEARCH=win32, force_s3tc_enable=true
- d3dx9_43, d3dcompiler_43, WINEARCH=win32, force_s3tc_enable=true,
glsl=disabled
- d3dx11_43, d3dcompiler_43
- d3dx11_43, d3dcompiler_43, glsl=disabled
- d3dx11_43, d3dcompiler_43, force_s3tc_enable=true
- d3dx11_43, d3dcompiler_43, gdiplus, ddr=gdi
- d3dx11_43, d3dcompiler_43, multisampling=disabled
- d3dx11_43, d3dcompiler_43, multisampling=enabled
- d3dx11_43, d3dcompiler_43, psm=disabled
- d3dx11_43, d3dcompiler_43, psm=enabled
- d3dx11_43, d3dcompiler_43, rtlm=disabled
- d3dx11_43, d3dcompiler_43, rtlm=readdraw
- d3dx11_43, d3dcompiler_43, strictdrawordering=enabled
- d3dx11_43, d3dcompiler_43, videomemorysize=2048, vsm=hardware
- d3dx11_43, d3dcompiler_43, vsm=hardware, psm=enabled
- d3dx11_43, d3dcompiler_43, vsm=hardware
- d3dx11_43, d3dcompiler_43, ao=enabled
---wine1.6.1---
- d3dx11_43, d3dcompiler_43
- d3dx9_43, d3dcompiler_43
- d3dx9_43, d3dcompiler_43, WINEARCH=win32
- d3dx9_43, d3dcompiler_43, WINEARCH=win32, glsl=disabled
- d3dx9_43, d3dcompiler_43, glsl=disabled
- d3dx9_43, d3dcompiler_43, force_s3tc_enable=true
- d3dx9_43, d3dcompiler_43, gdiplus, ddr=gdi
---wine1.4.1---
- d3dx9_43, d3dcompiler_43 <--- this configuration didn't launch at all for
different reasons
Setting `MESA_DEBUG=1 force_s3tc_enable=true` did not log any additional
messages, even after upgrading to
libtxc-dxtn-dev_1.0.1-0.3ubuntu0sarvatt+quantal from ppa:xorg-edgers... so
maybe that does what I think it does?
Logs will be attached in gzip format since they have
`WINEDEBUG=warn+all,trace+d3d,relay+d3d` and are over a gig (<100MB under gzip
-9 though).
Additional info about my system:
- libtxc-dxtn-s2tc0_0~git20110809-3
- xserver-xorg_1:7.7+1ubuntu4
- attached glxinfo for my Nvidia 550 TI (vbios 70.26.3a.00.52)
- ubuntu 12.10 quantal, x86_64
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19667
Summary: Demo for Total Annihilation: mouse scrolling of screen
unworkable.
Product: Wine
Version: 1.1.27
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hughperkins(a)gmail.com
Demo for Total Annihilation: mouse scrolling of screen unworkable.
On screens that cannot run at 640x480 resolution, the demo of Total
Annihilation has to run in a virtual desktop in order to run at all, otherwise
it crashes. This is not I feel the bug.
The issue targeted by this bug report is that it is unworkably hard to scroll
around the game world by moving the mouse pointer to the edges of the window,
since the mouse pointer has to be positioned *exactly* on the edge of the
window, which is possible, but detracts from the gameplay experience to the
point as to be unplayable.
A possible solution to this issue (which is not really a bug, so much as a lack
of a feature I feel), could be to make it possible to enforce in wincfg that
the mouse is locked to a particular region of the window or screen, by default
to the window itself.
wincfg could provide the possibility to specify a keyboard shortcut to unlock
the mouse when necessary, or simply, by alt-tabbing out of the window, the
mouse could be unlocked.
For an example of another environment that implements this, you could look for
example at dosbox. If you run for example populous in dosbox in a window, it
works perfectly I feel, by locking the mouse pointer to the window, and one can
use ctrl-f10 to free it, which I feel is totally unintuitive, but I feel works
fine.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40442
Bug ID: 40442
Summary: Unexplained new random comctl32:header failure
(cross-compiler issue?)
Product: Wine
Version: 1.9.6
Hardware: x86
OS: Windows
Status: NEW
Severity: normal
Priority: P2
Component: comctl32
Assignee: wine-bugs(a)winehq.org
Reporter: fgouget(a)codeweavers.com
comctl32:header started having regular failures on newtb-wxppro right after the
WineHQ upgrade (2016/03/17).
https://test.winehq.org/data/tests/comctl32:header.html
The failure:
header.c:1148: Test failed: expected 0, got 1
Things that point to a cross-compiling issue:
* Since 2016/03/18 comctl32:header has had an almost systematic failure on
newtb-wxppro (68.7%) and more rarely on newtb-w2003std (12.5%).
* In the 27 runs from 2016/02/09 to 2016/03/17 it had no failure (neither on
these two platforms nor on any other).
* There has been no change to comctl32:header before it started failing.
* The tests that run before comctl32:header don't seem to have undergone
changes that could cause the following tests to fail (see 'git log
62277fb7779f..6bc0ce26a853 dlls/[abc]*/tests').
Unexplained mysteries:
* Cross-compiling the test with i686-w64-mingw32-gcc (GCC) 5.3.1 20160205, the
standard '-g -O2' options and uploading it to the TestBot does not yield the
expected failure (changing that to '-g -O0' does not make a difference either).
* None of the other platforms is affected.
* And even more strange, newtb-xppro is the only Windows XP to be affected by
the new failure.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41106
Bug ID: 41106
Summary: Lethe - Episode One crashes without native dotnet4.0
Product: Wine
Version: 1.9.16
Hardware: x86-64
OS: Linux
Status: NEW
Severity: minor
Priority: P2
Component: mscoree
Assignee: wine-bugs(a)winehq.org
Reporter: andrey.goosev(a)gmail.com
Distribution: ---
Created attachment 55312
--> https://bugs.winehq.org/attachment.cgi?id=55312
log
Stacktrace:
at <unknown> <0xffffffff>
at <Module>.?A0x6845bc90.??__EGPickColorStruct@@YMXXZ () <0x00027>
at <Module>._initterm_m (*()*,*()*) <0x00029>
at <Module>.<CrtImplementationDetails>.LanguageSupport.InitializePerProcess
(<CrtImplementationDetails>.LanguageSupport*) <0x00063>
at <Module>.<CrtImplementationDetails>.LanguageSupport._Initialize
(<CrtImplementationDetails>.LanguageSupport*) <0x00207>
at <Module>.<CrtImplementationDetails>.LanguageSupport.Initialize
(<CrtImplementationDetails>.LanguageSupport*) <0x0006f>
at <Module>..cctor () <0x0002f>
at (wrapper runtime-invoke) object.runtime_invoke_void
(object,intptr,intptr,intptr) <0xffffffff>
=================================================================
Got a SIGSEGV while executing native code. This usually indicates
a fatal error in the mono runtime or one of the native libraries
used by your application.
=================================================================
wine-1.9.16-38-g84b3218
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41119
Bug ID: 41119
Summary: vbscript fails to parse
'createobject("wscript.shell").run' statement
Product: Wine
Version: 1.9.16
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: vbscript
Assignee: wine-bugs(a)winehq.org
Reporter: aihujianfei(a)qq.com
Distribution: ---
The vbscript file for test is :
createobject("wscript.shell").run "calc.exe"
I see the vbs bison parse file in
https://github.com/alexhenrie/wine/blob/master/dlls/vbscript/parser.y ,
the parse failed at the pos [.run] in this file.
I think the fail reason is there has one confilct .
for more information , I run command [bison -v -d -pparser_ parser.y], then it
generate file parser.output .
In the file parser.output , part of the file show this confilct which mentioned
above .
"
state 160
77 ArgumentList: Expression .
78 | Expression . ',' ArgumentList
85 Expression: Expression . tIMP EqvExpression
138 PrimaryExpression: '(' Expression . ')'
tIMP shift, and go to state 123
',' shift, and go to state 162
')' shift, and go to state 156
')' [reduce using rule 77 (ArgumentList)]
"
As we can see above , there has one shift/reduce conflict . to parse this file
success , we need a reduce to ArgumentList , instead of shift to
PrimaryExpression .
I will appreciate your fix.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13499
Summary: The Odyssey: Winds Of Athena: access violation when
trying to run
Product: Wine
Version: 1.0-rc2
Platform: PC
URL: http://gamecenter.oberon-media.com/game.htm?code=111299413&RefId=&origin=pcat_gm_
u
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: msclrhd(a)gmail.com
Steps to reproduce:
1. Install The Odyssey: Winds Of Athena
2. Run directly from its install directory
When it is trying to start up, the application will crash with an access
violation.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10728
Summary: LEGO Island character models are textureless
Product: Wine
Version: 0.9.50.
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: wine-directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: echidnaman(a)gmail.com
Created an attachment (id=9570)
--> (http://bugs.winehq.org/attachment.cgi?id=9570)
Console log
The character models in Lego Island (the original) are textureless. The
attached log contains the console output.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16644
Summary: SimGolf v1.03 does not render terrain
Product: Wine
Version: 1.1.11
Platform: PC-x86-64
URL: http://www.simgolf.ea.com/
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: tom78999(a)gmail.com
Simgolf, with the latest patch, does not render any terrain and instead simply
renders a black background. The attached screenshot illustrates this.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=36431
Bug ID: 36431
Summary: valgrind shows a possible leak in
shell32/tests/ebrowser.c
Product: Wine
Version: 1.7.18
Hardware: x86
OS: Linux
Status: NEW
Keywords: download, source, testcase
Severity: normal
Priority: P2
Component: shell32
Assignee: wine-bugs(a)winehq.org
Reporter: austinenglish(a)gmail.com
==28261== 28 bytes in 1 blocks are possibly lost in loss record 279 of 995
==28261== at 0x7BC50A9B: RtlAllocateHeap (heap.c:255)
==28261== by 0x5C44BB8: apartment_getclassobject (compobj.c:526)
==28261== by 0x5C47FC6: get_inproc_class_object (compobj.c:2894)
==28261== by 0x5C4AD2F: CoGetClassObject (compobj.c:3032)
==28261== by 0x5C4B4B7: CoCreateInstance (compobj.c:3197)
==28261== by 0x4D82686: func_ebrowser (ebrowser.c:94)
==28261== by 0x4DC8888: run_test (test.h:584)
==28261== by 0x4DC8C77: main (test.h:654)
==28261==
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13273
Summary: Wine does not remember disk labels set through winecfg
Product: Wine
Version: 1.0-rc1
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ccf2egd02(a)sneakemail.com
Wine does not seem to remember disk labels or serial numbers when set via
winecfg.
Steps to reproduce:
1) create a disk entry in ~/.wine/dosdevices
ln -s /someplace_with_CD_image ~/.wine/dosdevices/q\:
2) run winecfg, select disk tab.
3) Select q:
4) Show advanced
5) Set to manual setup, disk label to "SOMETHING", disk ID to "FEEDBE"
6) APPLY
7) verify data by selecting some other drive, then re-selecting q:
8) quit winecfg
9) Restart winecfg and reselect the disk tab. Reselect q:
Expected results
Disk label should be "SOMETHING", id should be "FEEDBE"
Actual results
Disk label unset, disk ID 0
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38933
Bug ID: 38933
Summary: In LiveCode 5.0.2, modal dialog prompts are created
behind all windows, hanging Wine.
Product: Wine
Version: 1.7.47
Hardware: x86-64
OS: Mac OS X
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: alexchandel(a)gmail.com
In LiveCode 5.0.2, whenever a dialog prompt is created, wine creates the modal
window behind the main window. Since the application is blocked until the modal
window is acknowledged, there is no way to continue, and LiveCode is
effectively hung.
Note this does not apply to system prompts, such as the file chooser; only
popups containing custom text, often created with a LiveCode script such as
`ask "foo bar"`, which when run immediately hangs Wine, since a dialog window
is created behind a much larger primary window (assuming one exists).
This error actually effects all LiveCode windows, but it is only critical for
dialogue windows, since those halt the program.
This *may* be related to 16346, although that was documented on X11, not Aqua.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16346
Summary: App hangs creating modal dialog from WM_ACTIVATEAPP
Product: Wine
Version: 1.1.10
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: user32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jmiller-wine(a)tanner.com
CC: jmiller-wine(a)tanner.com
Created an attachment (id=17660)
--> (http://bugs.winehq.org/attachment.cgi?id=17660)
Simple windows app with source that brings up a message box every time the
window is activated.
I have an app which opens a modal dialog under some circumstances when the
window is activated. Under Windows this works perfectly, but under wine it
causes the app to hang. I have attached a trivial sample app showing this
behavior.
I poked around a bit, and the app is no longer receiving any messages (mouse
moves, keyboard, paint, etc), but I'm not sure where to go from here.
Also under Windows, since the app checks for the wParam (bActive) on
WM_ACTIVATEAPP, it only brings up one copy of the dialog box even after
multiple window activations. Under wine it will bring up another copy of the
dialog if there is already a modal dialog on that app.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24945
Summary: font is not drawn in synth1 instrument selection
window
Product: Wine
Version: 1.3.4
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: fonts
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: armandsl(a)gmail.com
Created an attachment (id=31583)
--> (http://bugs.winehq.org/attachment.cgi?id=31583)
synth1 on wine 1.3.4
Starting with wine version 1.2.0 font is not drawn in synth1 instrument
selection window anymore. Synth1 is free VST software synthesizer
(http://www.geocities.jp/daichi1969/softsynth/).
OS used: Linux (Fedora 14)
Dll is loaded by LMMS (Linux Multi Media System) version 0.4.8
It worked with wine 1.1.38 (with old font subsystem).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38521
Bug ID: 38521
Summary: Unhandled exception: page fault on read access to
0x00000000 in 32-bit code (0x7
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntdll
Assignee: wine-bugs(a)winehq.org
Reporter: ettl.martin78(a)gmail.com
Distribution: ---
Created attachment 51390
--> https://bugs.winehq.org/attachment.cgi?id=51390
backtrace from wine
Steps to reproduce:
1) Install SourceNavigator from
(http://sourceforge.net/projects/sourcenav/?source=typ_redirect) on Ubuntu
Linux 15.04 (32-Bit) with wine.
2) Execute SourceNaviator
3) Close SourceNaviator
4) The exception message is shown. Please refer to the backtrace.
If you have questions, please feel free to ask.
Many thanks for working so hard on wine.
Best regards
Martin Ettl
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39709
Bug ID: 39709
Summary: winmm:mci makes a buzzing sound
Product: Wine
Version: 1.8-rc2
Hardware: x86
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: winmm&mci
Assignee: wine-bugs(a)winehq.org
Reporter: fgouget(a)codeweavers.com
Distribution: ---
Running winmm:mci makes a buzzing sound. The first line (of many) where this
happens is the line below from test_playWAVE():
/* A second play caused Wine<1.1.33 to hang */
err = mciSendStringA("play mysound from 500 to 220:5:0 wait", NULL, 0,
NULL);
This is because the test records sound to tempfile.wav before playing it back.
So if the recording levels are set a bit high tempfile.wav can record
electrical noise, the buzzing sound, and thus makes noise when playing it back.
This is confirmed by changing the recording level in the KDE mixer prior to
running the test:
* Setting it all the way down avoids the buzzing sound.
* Setting it even moderately high causes the buzzing sound.
Conformance tests are supposed to not make noises when not run in interactive
mode so this should be fixed. I see two ways for this:
* Set and restore the recording level in test_recordWAVE().
* Create tempfile.wav by hand instead of relying on the output of
test_recordWAVE().
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21692
Summary: Zombie Bowl-O-Rama won't start:
RtplWaitForCriticalSection
Product: Wine
Version: 1.1.38
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: tonglebeak(a)gmail.com
Created an attachment (id=26215)
--> (http://bugs.winehq.org/attachment.cgi?id=26215)
konsole output
Using wine-1.1.38, I am unable to run Zombie Bowl-O-Rama in Steam (other steam
games run fine). Attached is konsole output. Have tried numerous winversions to
no avail, as well as a clean wineprefix. If any additional information is
needed from me, kindly let me know. Thanks.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23634
Summary: duplex (dual-sided) print doesn't work
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: psygnosis(a)mail.ru
Printing from any wine app (even from notepad) to printer, which supports
dual-sided printing, fails (all pages are printing on separate pages). If I
change printing settings in CUPS to dual-sided print, everything goes
dual-sided. Wine settings doesn't have any effect. This bug already have been
described & fixed in russian commercial wine release WINE@Etersoft
(http://etersoft.ru/wine/updates). There everything works fine.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17479
Summary: ConvertXToDVD 3.4.7.121 Do not load templates.
Product: Wine
Version: 1.1.14
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P4
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jaysonsantos2003(a)yahoo.com.br
Hello people, I'm trying to use ConvertXToDVD in my linux box and all works
fine, however the program cannot load template.
I tried to convert with a default template and the conversion finished
sucessful however without a menu (which are selected by templates).
When I try to open a template from menu I receive: "List index out of
bounds(1)".
Best Regards
Jayson
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38566
Bug ID: 38566
Summary: LB_SETSEL message should set caret as well
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: comctl32
Assignee: wine-bugs(a)winehq.org
Reporter: q.winehq(a)rsn-tech.co.uk
Distribution: ---
When you send the LB_SETSEL message to a multi-selection list box in Windows,
it also sets the focus to the appropriate item and scrolls it into view if
necessary. In Wine, this secondary function appears not to happen and an
additional LB_SETCARETINDEX message is needed to duplicate the full Windows
functionality.
I don't know if this happens in all circumstances, but it fixed a long-standing
problem in a complex application where a list box would not automatically
scroll as it did in Windows.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14303
Summary: Listview: select all is incredibly slow.
Product: Wine
Version: 1.1.0
Platform: All
OS/Version: All
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: comctl32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: winehq.10.drkshadow(a)spamgourmet.com
Created an attachment (id=14587)
--> (http://bugs.winehq.org/attachment.cgi?id=14587)
quickly select all items in a listview
When you hit Ctrl-A in a listview control, the control loops through every
single item in the list selecting them and setting focus on the item. With tens
of thousands of items, this takes a _long_time_.
I've created a patch that sets the range of selected items. This select all
happens much more instantaneously. As an added bugfix, the selected item will
not be changed when all items are selected.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35896
Bug ID: 35896
Summary: Switching to Chinese input method after typing some
English will fail.
Product: Wine
Version: 1.7.15
Hardware: x86
OS: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: hwei.sy(a)gmail.com
== Steps to reproduce ==
1. Open notepad in wine.
2. Make sure input method is English.
3. Type something (e.g. H, A, SPACE), then the notepad will display it (e.g.
"ha ").
4. Switch to Chinese input method.
5. Type something (e.g. H, A, SPACE), then the notepad dose not receive
anything (e.g. should display "哈").
This bug will only appear when input something in English before Chinese. But
if you input Chinese before any English character (i.e. remove step 2, 3),
every thing is going well.
== How to fix it ==
In the source file "dlls/imm32/imm.c", function "ImmProcessKey",
after "if (imc) data = imc; else return FALSE;",
insert one line "data->immKbd = IMM_GetImmHkl(hKl);".
Then it seems fixed. But I don't know will this cause other problems.
----
I am not sure this bug is same to Bug 34056.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=31434
Bug #: 31434
Summary: Menu is activated by alt key while mouse button is
down
Product: Wine
Version: 1.5.10
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: user32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kaetemi(a)gmail.com
Classification: Unclassified
Created attachment 41320
--> http://bugs.winehq.org/attachment.cgi?id=41320
user32: Menu should not be activated by menu key while mouse buttons are down.
When using and Alt+MouseButton combination, the application menu becomes
selected after releasing Alt.
More specifically, in 3ds Max 9, when using the Alt+MiddleMouse in a viewport
to rotate, after releasing Alt the File menu will be selected, and the viewport
will appear as if frozen to the user, not accepting any input until Alt is
pressed again to release the menu.
Patch with fix attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10358
Summary: wine 0.9.48 takes 5 minutes to start an application
Product: Wine
Version: 0.9.48.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-winelib
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jean-jaques(a)women-at-work.org
Created an attachment (id=9029)
--> (http://bugs.winehq.org/attachment.cgi?id=9029)
wine debug output where wine freezes for a while
I've wiped my .wine directory and had winecfg rebuild it. Then I installed
iTunes 7.3 and now it takes more than 5 minutes until wine launches _any_
windows application.
When I enter "wine app.exe" nothing happens for a really long time. After
waiting for 5 or sometimes up to 10 minutes (no CPU load) the application
launches. This even applies to winecfg!
When I run wine in debug mode (WINEDEBUG=+relay winecfg) it stops producing
output at a certain point and then continues (again after a few minutes).
I have attached some debug output (the place where wine seems to freeze and
stops producing output). I can't attach the entire file, because it is 40MB :(
wine 0.9.48, compiled from sources, Gentoo 2007.0
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18790
Summary: Default search does not include resolved bugs
Product: WineHQ Bugzilla
Version: unspecified
Platform: PC
OS/Version: Linux
Status: NEW
Keywords: download, source
Severity: enhancement
Priority: P3
Component: bugzilla-unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kennybobs(a)o2.co.uk
The default search (the search box at the top of this page) does not include
closed bugs (rightly so), but it also does not include resolved bugs. This
leads to duplicates that could be avoided.
See Bug 18601 - a recent regression that is fixed by the next release, but
anyone searching for an open bug for Google Sketchup will not see it unless
they choose to run an advanced search, which some users clearly don't.
I'm sure this is a simple change to the code.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38269
Bug ID: 38269
Summary: Project64k regression in Wine 1.5.20 and later
Product: Wine
Version: 1.5.20
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: leodexe(a)gmail.com
Distribution: ---
Created attachment 51097
--> https://bugs.winehq.org/attachment.cgi?id=51097
Output from the terminal when the program is being executed
Well, it is quite simple. When you execute Project64k (READ CAREFULLY),
Project64k, NOT the standard Project 64 emulator, but the one that has netplay
capabilities within any version of Wine older than 1.5.20 it won't recognize
controller plugins, no matter what controller plugin you actually use it won't
work so basically you will not be able to play online due to the controller
inputs being disabled. If you run Project64k with Wine 1.5.19 or older it will
just run fine without any problems, though. I have added an attachment which
shows the output from the terminal when you run the program via terminal, if it
happens to be something useful there so the regression can be fixed. Note that
this regression both affects x86 and x64 versions of Wine.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42437
Bug ID: 42437
Summary: Wine Wiki: Building Wine - Compiler Optimizations &
Call-Stacks
Product: WineHQ.org
Version: unspecified
Hardware: x86
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: www-unknown
Assignee: wine-bugs(a)winehq.org
Reporter: wylda(a)volny.cz
Distribution: ---
Wiki link:
https://wiki.winehq.org/Building_Wine#Compiler_Optimizations_.26_Call-Stacks
Says:
../wine-source/configure CFLAGS="-g -O1 -fno-optimize-sibling-calls
-fno-omit-frame-pointer -fno-inline"
IMHO these two are superfluous as:
* "optimize-sibling-calls" is disabled in -O1 and enabled since -O2
* "omit-frame-pointer" is disabled in -O0, -O1 and -O2
at least by comparing output of following two commands:
gcc -g -O1 -Q --help=common
gcc -g -O1 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline -Q
--help=common
I tried that on Debian Stretch. Gcc (Debian 6.3.0-6) 6.3.0 20170205
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45314
Bug ID: 45314
Summary: https://bugs.winehq.org landing page and task lists
bar mention wine 2.0
Product: WineHQ.org
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: www-unknown
Assignee: wine-bugs(a)winehq.org
Reporter: dav75uk(a)yahoo.co.uk
Distribution: ---
Either show be removed, or detail tasks for wine 4.0 - makes the website look
abandoned
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40395
Bug ID: 40395
Summary: Winehq.org website improvements not added to the forms
site.
Product: WineHQ.org
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: www-unknown
Assignee: wine-bugs(a)winehq.org
Reporter: asdfghrbljzmkd(a)outlook.com
Distribution: ---
There have been many Winehq.org website improvements lately, such as a nicer
search bar and more modern navigation buttons, that have not been added to the
forms site.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18344
Summary: Icons disappear with mouse over them at
http://winehq.org/
Product: WineHQ.org
Version: unspecified
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: www-unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dar32ster(a)gmail.com
When standing over the icons at http://winehq.org/ with the mouse the icons
take time to download and it seems like they are disappearing. You should
download the icons on loading to make this problem disappear.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12091
Summary: out of place text on bugzilla component description page
Product: WineHQ Bugzilla
Version: unspecified
Platform: Other
OS/Version: other
Status: NEW
Severity: trivial
Priority: P2
Component: bugzilla-unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: thestig(a)google.com
I can't seem to find the change for this in bugzilla.git...
On http://bugs.winehq.org/enter_bug.cgi, someone added the text:
<-- You probably want to use that link there!
Wine bugs. Submit bugs related to Wine here.
<-- Use this if in doubt!
but it also appears on this page:
http://bugs.winehq.org/describecomponents.cgi?product=Wine
which doesn't make any sense.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24566
Summary: bugzilla adds mr.bugs to cc list?
Product: WineHQ Bugzilla
Version: unspecified
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: bugzilla-unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
Bugs start out with Mr. Bugs as the default assignee, which is evidently
intended so the mailing list gets copied on all bug changes. That's fine.
But under some situations, bugzilla seems to also automatically add
mr. bugs to the cc list.
For instance, here:
http://www.winehq.org/pipermail/wine-bugs/2010-September/251648.html
Whereupon Dmitry promptly removed it from the cc:
http://www.winehq.org/pipermail/wine-bugs/2010-September/251690.html
Austin verified that this had been done automatically by repeating his
component change:
http://www.winehq.org/pipermail/wine-bugs/2010-September/251728.html
and then removed the extra cc manually in the next change.
What's going on here? Should that cc be added automatically or not?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38575
Bug ID: 38575
Summary: https://bugs.winehq.org/enter_bug.cgi should list
Distribution package bugtrackers, for example, for
Fedora.
Product: WineHQ.org
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: www-unknown
Assignee: wine-bugs(a)winehq.org
Reporter: linards.liepins(a)gmail.com
Distribution: ---
Recently I have found very ****ing great surprise from Fedora repository called
wine-staging packages.
After explanation from other users, this is 'vanilla' wine + hundreds of
patches.
So, generally, it means each and every user using Fedora, are not eligible to
submit bugs to winehq bugzilla. Same as if you use PlayOnLinux or anything else
similar.
So, to avoid spam of such bugs into winehq.org bugzilla instance, I suggest to
add link or even section 'Distribution specific', that then would list external
bugzilla trackers, for example, this:
https://bugs.wine-staging.com/
Original thread:
https://bugs.winehq.org/show_bug.cgi?id=30608
Note of this bug:
Originally it was reported on 'vanilla' wine. Retesting, obviously, was done on
Staging.
Note of the page itself:
There are some typo erros in this string: 'Submit broken links and other web
related isssues.'
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40394
Bug ID: 40394
Summary: Winehq.org website improvements not added to AppDB.
Product: WineHQ Apps Database
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: appdb-unknown
Assignee: wine-bugs(a)winehq.org
Reporter: asdfghrbljzmkd(a)outlook.com
Distribution: ---
There have been many Winehq.org website improvements lately, such as a nicer
search bar and more modern navigation buttons, that have not been added to
AppDB.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39923
Bug ID: 39923
Summary: Add architecture field
Product: WineHQ Apps Database
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: appdb-unknown
Assignee: wine-bugs(a)winehq.org
Reporter: jhansonxi(a)gmail.com
Distribution: ---
https://en.wikipedia.org/wiki/Windows_API#Versions
Makes it easier to identify which architecture an app uses. Would make it
obvious which architecture a test report applies to when an app is available in
multiple architectures. Might provide useful statistical info also.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42333
Bug ID: 42333
Summary: "Top garbage" list on AppDB
Product: WineHQ Apps Database
Version: unspecified
Hardware: Other
OS: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: appdb-unknown
Assignee: wine-bugs(a)winehq.org
Reporter: roothorick(a)gmail.com
Just a simple top 10 or top 25 list of the most active apps with a garbage
rating. It would be an easy at-a-glance forecast of what apps (and therefore,
indirectly, what bugs) are the greatest concern for Wine users.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=43320
Bug ID: 43320
Summary: Support a Recent added page
Product: WineHQ Apps Database
Version: unspecified
Hardware: x86
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: appdb-unknown
Assignee: wine-bugs(a)winehq.org
Reporter: leslie_alistair(a)hotmail.com
Distribution: ---
It would be nice to have a page which listed the recently added Applications.
Broken down by Games/Application
With a possible time frame of Week/Month, anything longer might produce a large
list.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=44333
Bug ID: 44333
Summary: Alphabetical order for monitored Applications
Product: WineHQ Apps Database
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: appdb-unknown
Assignee: wine-bugs(a)winehq.org
Reporter: mywine(a)schiermeier-it.de
Distribution: ---
Created attachment 60207
--> https://bugs.winehq.org/attachment.cgi?id=60207
Actual view of AppDBs side bar at the end of this bar
Two points about the side bar in AppDB:
1.) Would like to have either a possibility to choose the order or this list
should be in alphabetical order
2.) The "Maintainer box" should be before the list of monitored applications.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45160
Bug ID: 45160
Summary: Eliminate JavaScript and CDN usage from AppDB for
better privacy and security of the visitors.
Product: WineHQ Apps Database
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: appdb-unknown
Assignee: wine-bugs(a)winehq.org
Reporter: kolan_n(a)mail.ru
Distribution: ---
There are some security and privacy issues in appdb.
0 It uses files from CDNs. You should store them locally and load them from own
server. If you can't do that, please enforce their integrity with
https://developer.mozilla.org/en-US/docs/Web/Security/Subresource_Integrity .
1 It is non-functional without JavaScript even though the same functionality is
achieved without using any JavaScript. For example drop-down panels are
implemented in browsers as a pair of HTML tags. Drop-down menus can be
implemented as css. There are lot of things that don't require any JS lines.
You should really consider throwing JS part of Bootstrap into garbage and using
pure HTML+CSS solution.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.