http://bugs.winehq.org/show_bug.cgi?id=22124
Summary: BartPE: crashes when trying to make "Build"
Product: Wine
Version: 1.1.41
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lxandr(a)ua.fm
Created an attachment (id=26980)
--> (http://bugs.winehq.org/attachment.cgi?id=26980)
terminal output
I launch "pebuilder.exe", everything goes fine. But when I press "Build" button
after a few seconds (screenshot1) application crashes (screenshot2).
Looks like there are some issues with registry creation, .inf files parsing
functions, etc.
Tested and didn't worked in any of these combinations: pebuilder 3.1.10a,
3.1.10; building PE from windows 2003 sp2, windows xp sp3.
Wine is installed from http://ppa.launchpad.net/ubuntu-wine/ppa/ubuntu
repository.
A few Wine updates earlier the problem still existed.
BartPE can be downloaded from here:
http://www.nu2.nu/pebuilder/#download
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28729
Bug #: 28729
Summary: EasyBCD: bcdedit complains about lack of privileges
Product: Wine
Version: 1.3.29
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: andrea.lazzarotto(a)gmail.com
Classification: Unclassified
I tried to use two softwares which make use of bcdedit.exe. Those are:
EasyBCD - http://neosmart.net/dl.php?id=1 (free non-commercial version)
Sardu - http://www.sarducd.it/
Both of them use bcdedit.exe in order to open bcd files, such as those present
on Windows Recovery discs. In both cases I get the same error message, which
should be this:
"Privilege not held"
(my system is in Italian so I'm not sure about the exact words)
Of course Wine doesn't have a BCD file, but EasyBCD asks me if I want to open
one and when I point it to the location I get the error.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29529
Bug #: 29529
Summary: Magical Jelly Bean Keyfinder: Cannot load Hive, says
"path not found".
Product: Wine
Version: 1.3.35
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jthomas97411(a)yahoo.com
Classification: Unclassified
Simply run Magical Jelly Bean keyfinder in Wine 1.3.35 (or any version before
that, I'm pretty sure), and try to load a hive (A hive is a binary file that
Windows uses to store registry keys, as opposed to a text file such as a *.reg
file containing registry keys in ASCII text.). It won't work. This is using
Magical Jelly Bean Keyfinder version 2.0.8.
Click on tools, and then go to "Load Hive..." An error message pops up saying
"Can't load registry hive from: ...
Path not found"
No terminal output.
The goal is to get Keyfinder to load /WINDOWS/System32/config/SOFTWARE.
Note: when you tell it to load a hive, it automatically appends
system32\config\software to the path you give. So if you tell it to load
~\windows\system32\config, it will look for
~\windows\system32\config\system32\config\software (which doesn't exist, or at
least shouldn't).
I have tried copying the config folder to the desktop and renaming everything
in the path to be all lowercase (the error message prints the path in all
lowercase, so I thought that might help it.), doesn't help.
Cheers,
Jake
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29461
Bug #: 29461
Summary: BurnPlot fails to start without native oleaut32
Product: Wine
Version: 1.3.35
Platform: x86-64
URL: http://download.imgburn.com/BurnPlot_1.0.1.5.zip
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: oleaut32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: RandomAccountName(a)mail.com
Classification: Unclassified
I guess this should be separate from the wshom issue in bug 28605...
BurnPlot fails to start after using 'winetricks vb6run wsh57' to get msvbvm60
and work around the aforementioned bug. It pops up an error dialog which says:
Run-time error '438':
Object doesn't support this property or method
Workaround: winetricks native_oleaut32
Terminal output is seven lines of:
fixme:ole:OLEPictureImpl_FindConnectionPoint no connection point for
{33ad4ed2-6699-11cf-b70c-00aa0060d393}
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34902
Bug #: 34902
Summary: Ableton Live 9 Suite v9.0.x (64-bit) crashes on
startup, needs msvcr90.dll._vsprintf_l
Product: Wine
Version: 1.7.6
Platform: x86-64
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: msvcrt
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Classification: Unclassified
Hello folks,
reported in forum.
--- snip ---
$ pwd
/home/focht/.wine/drive_c/users/Public/Application Data/Ableton/Live 9
Suite/Program
$ file *.{dll,exe}
Ableton Live Engine.dll: PE32+ executable (DLL) (GUI) x86-64, for MS Windows
VideoExportMMF.dll: PE32+ executable (DLL) (GUI) x86-64, for MS Windows
Ableton Live 9 Suite.exe: PE32+ executable (GUI) x86-64, for MS Windows
InstallHelper.exe: PE32+ executable (console) x86-64, for MS Windows
$ wine ./Ableton\ Live\ 9\ Suite.exe
...
fixme:msvcp:_Locinfo__Locinfo_ctor_cat_cstr (0x23f060 1 C) semi-stub
wine: Call from 0x7b849f8f to unimplemented function msvcr90.dll._vsprintf_l,
aborting
fixme:seh:__CxxFrameHandler 0x23f430 23f930 0x23e6b0 0x23eb80: not implemented
fixme:seh:__CxxFrameHandler 0x23f430 23fa40 0x23e6b0 0x23eb80: not implemented
wine: Unimplemented function msvcr90.dll._vsprintf_l called at address
0x7b849f8f (thread 0024), starting debugger...
...
Modules:
Module Address Debug info Name (100 modules)
PE 400000- 67f2000 Export ableton live 9 suite
PE 5d360000- 5d36d000 Deferred mfc90enu
PE 78e10000- 792f9000 Export mfc90u
ELF 7b800000- 7bc82000 Dwarf kernel32<elf>
\-PE 7b820000- 7bc82000 \ kernel32
ELF 7be00000- 7c103000 Dwarf <wine-loader>
...
Threads:
process tid prio (all id:s are in hex)
...
00000023 (D) C:\users\Public\Application Data\Ableton\Live 9
Suite\Program\Ableton Live 9 Suite.exe
00000024 0 <==
--- snip ---
Source:
http://source.winehq.org/git/wine.git/blob/3bb2c11757156223be0f8a22f3b377b0…
--- snip ---
1116 @ stub _vsprintf_l
--- snip ---
$ sha1sum Setup.msi
7285fbd9c8db10ac25eb996578448dcae2b2fb73 Setup.msi
$ du -sh Setup.msi
676M Setup.msi
$ wine --version
wine-1.7.6-202-gc7274f1
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34064
Bug #: 34064
Summary: Adobe CS4 installer fails
Product: Wine
Version: 1.6-rc5
Platform: x86-64
OS/Version: Linux
Status: NEW
Keywords: Installer
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kennybobs(a)o2.co.uk
Classification: Unclassified
Created attachment 45280
--> http://bugs.winehq.org/attachment.cgi?id=45280
wine-1.6-rc5 console output
Working around Bug 18070, the installer for Adobe CS4 fails.
It used to work but due to Bug 34063 a bisect would take about a month. I will
update when it is complete.
"winetricks ie6" appears to take the installer further (both the application
and Wine logs are larger) but the same failure occurs: failed to install
Photoshop CS4 (and another component).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33226
Bug #: 33226
Summary: Multiple applications ported to WinRT/ARM require
msvcr110.dll.__crtSetUnhandledExceptionFilter
(MirandaIM, FinalBurn, ...)
Product: Wine
Version: 1.5.26
Platform: arm
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: msvcrt
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Classification: Unclassified
Hello folks,
another one ...
--- snip ---
$ wine ./miranda32.exe
wine: Call from 0x403f69c8 to unimplemented function
msvcr110.dll.__crtSetUnhandledExceptionFilter, aborting
wine: Unimplemented function msvcr110.dll.__crtSetUnhandledExceptionFilter
called at address 0x403f69c8 (thread 0009), starting debugger...
--- snip ---
Forwarding msvcr110.dll __crtSetUnhandledExceptionFilter(ptr) to
kernel32.SetUnhandledExceptionFilter let the apps run further.
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32766
Bug #: 32766
Summary: Multiple applications ported to WinRT/ARM require
msvcr110.dll (Miranda IM)
Product: Wine
Version: 1.5.22
Platform: arm
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: msvcrt
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Classification: Unclassified
Hello folks,
some of the application ports to WinRT/ARM require "MSVCR110.dll"
--- snip ---
$ wine ./miranda32.exe
err:module:import_dll Library MSVCR110.dll (which is needed by
L"Z:\\home\\linaro\\wine-apps\\miranda\\zlib.dll") not found
err:module:import_dll Library zlib.dll (which is needed by
L"Z:\\home\\linaro\\wine-apps\\miranda\\miranda32.exe") not found
--- snip ---
There is a forum at xda-developers dedicated to porting/recompiling various
open-source projects to WinRT, especially:
http://forum.xda-developers.com/showthread.php?t=2092348
(Windows 8 Development and Hacking > Windows 8 Development and Hacking >
Desktop apps ported to Windows RT)
Some ports already run nicely with workarounds from already known wine-arm bugs
(notepad++) but others require WinRT libs (combase.dll etc.).
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29042
Bug #: 29042
Summary: Regression; Code-8 Initialization
Product: Wine
Version: 1.3.32
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mcgraw5058(a)bellsouth.net
Classification: Unclassified
Apogee Components RockSim, version 9.1.1.118, using Wine 1.3.32. Program fails
to start and displays small dialog saying "Code-8" Initialization error. Wine
1.3.31 worked fine.
Engine Editor also affected in same way.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29002
Bug #: 29002
Summary: GPU-Z v0.5.5 crashes at launch
Product: Wine
Version: 1.3.32
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: testing.tigerwolf(a)mail.com
Classification: Unclassified
Created attachment 37327
--> http://bugs.winehq.org/attachment.cgi?id=37327
GPU-Z v0.5.5 crashes at launch
GPU-Z crashes at launch with the following error message :
wine: Unhandled page fault
"GPU-Z program has encountered a serious problem and needs to close"
(see attachments for more details)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19040
Summary: AOL cd installer crashes on launch
Product: Wine
Version: unspecified
Platform: PC
URL: http://www.aol.com
OS/Version: Linux
Status: NEW
Keywords: Installer
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=21963)
--> (http://bugs.winehq.org/attachment.cgi?id=21963)
+relay,+seh,+tid
Got an AOL cd installer in the mail (holy crap, they're still alive?!?) a while
back, decided to see what it would do in wine...Running 'wine AOLSETUP.EXE'
bombs out pretty quickly with a crash. +relay,+seh,+tid attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13677
Summary: SmartFTP 3.0: crash on startup
Product: Wine
Version: 1.0-rc3
Platform: PC
URL: http://www.smartftp.com/get/SFTPMSI.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: baryluk(a)smp.if.uj.edu.pl
Created an attachment (id=13677)
--> (http://bugs.winehq.org/attachment.cgi?id=13677)
Debug log.
Log in attachment
baryluk@tytus:~/.wine/drive_c/Program Files/SmartFTP Client$ WINEDEBUG=warn+dll
wine ./SmartFTP.exe 2>&1 | tee debugowanie.txt
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12461
Summary: SmartFTP Client requires an implementation of
cryptui.dll
Product: Wine
Version: CVS/GIT
Platform: PC
URL: http://www.smartftp.com/download/
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: nodisgod(a)yahoo.com
An attempt to start the SmartFTP client fails because of missing cryptui.dll.
While copying the DLL from an installation of Windows XP satisfies the
application enough to get it to run, cryptui.dll is as far as I'm aware not
redistributable and thus using native cryptui.dll is not always tenable.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13487
Summary: Smartftp does not run (dogfood)
Product: Wine
Version: 1.0-rc2
Platform: PC
URL: http://www.smartftp.com/
OS/Version: Linux
Status: NEW
Keywords: download
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=13410)
--> (http://bugs.winehq.org/attachment.cgi?id=13410)
Terminal output in git
Reported in wine-users:
SmartFTP installs but fails to start with: "Fatal Error: sfFTPLib.dll is not
registered correctly"
http://www.smartftp.com/download/
System: Fedora 9
Wine: 1.0 rc2
Gave it a try. Installs fine, after installing, running regsvr32 on
sfFTPLib.dll gets it to run a bit, then installs wine gecko. Runs a bit more,
then crashes. Terminal output and backtrace attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26031
Summary: µTorrent (uTorrent) fails listening to a port after a
number of persistent connections are opened against it
Product: Wine
Version: 1.3.13
Platform: All
URL: http://www.utorrent.com/
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wineserver
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: t.artem(a)mailcity.com
Steps to reproduce:
1) Run µTorrent
2) Incoming connections icon should turn green (port listen: OK), netstat -ln
confirms that
3) Start downloading any torrent
4) Incoming connections icon will turn red (Listen error: you should change the
listen port)
observe these errors logged in uTorrent Logger Tab:
[2011-02-09 02:28:50] *** Starting Diagnostic thread ***
[2011-02-09 02:28:50] IPv6 is installed
[2011-02-09 02:31:46] TCP port bind failed 0.0.0.0:9001: (10048) Error 10048
[2011-02-09 02:32:12] TCP port bind failed 0.0.0.0:9001: (10048) Error 10048
at this point neither Wine, nor µTorrent will be listening to the designated
port:
# netstat -ln -eep | grep 8008
udp 0 0 0.0.0.0:8008 0.0.0.0:*
500 117033 10470/uTorrent.exe
so while uTorrent is listening to the incoming UDP connections, TCP traffic is
unmanaged causing the errors in the µTorrent's Logger Tab.
The strangest thing is that no other application will be able to use this port
(8008):
# nc -vl 8008
nc: Address already in use
However if I order nc to bind to the loopback interface specifically, it will
run:
# nc -vl localhost 8008
[running]
It's worth noting that when wine/uTorrent "listen" abilities break, there are
already some established connections to my_external_IP_address:8008 (right now
I see three such ESTABLISHED connections).
So, probably there's some sort of bug in wine server - it shouldn't stop
listening to a port when persistent connections are made to it - but I'm
totally uncertain about it because I have no idea how wine server (should)
handles TCP traffic.
I can help solving this bug by attaching any required debug information if it's
necessary.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18303
Summary: Adobe Acrobat Pro 7: Crashes when selecting the "edit"
menu while having a file open.
Product: Wine
Version: 1.1.20
Platform: PC-x86-64
URL: http://ardownload.adobe.com/pub/adobe/acrobat/win/7x/7.0
/misc/AcTR7EFG.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: waltherbans(a)yahoo.de
Created an attachment (id=20834)
--> (http://bugs.winehq.org/attachment.cgi?id=20834)
This it what is printed out when I started Acrobat via Terminal, opened a
pdf-file and clicked on "edit" menu
Selecting the "edit" menu when Acrobat has a file open causes it to crash.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12659
Summary: Preferences window missing all user-modifiable settings
in Acrobat V7.0 Pro
Product: Wine
Version: 0.9.58.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: winebugs(a)q51.org
After installing normally, start Acrobat. Give the application some time to
display any notices about pending updates, etc., and clear them. There is no
need to load a file; this bug pertains to the preferences for the application
itself, not a PDF that's been loaded.
By going to the Edit menu and selecting the "Preferences..." option (or via the
shortcut CTRL + K) it's possible to bring up the Preferences window, but only
the "Categories" listbox control and text label are displayed (on the left-hand
side of the Preferences window), along with OK and Cancel buttons. The
right-hand side of the window, which should display a variety of controls that
change for each category the user selects, is completely blank and displays
only as the window's background color.
I am testing with a stock, plain Debian and Wine installation. No tricks or
borrowed DLLs involved.
My Wine version:
wine-0.9.58 (the latest available to me as a Debian user)
My distro:
A plain install of Debian 4.0r3 (Etch)
Uname -a output:
Linux test 2.6.18-6-686 #1 SMP Sun Feb 10 22:11:31 UTC 2008 i686 GNU/Linux
Wine package retrieved from:
wine.budgetdedicated.com:
Wine package name:
wine_0.9.58~winehq0~debian~4.0-1_i386.deb
Windows application being tested:
Adobe Acrobat Professional V7.0.0, off a factory-pressed, genuine CD
Launching from the default application installation directory with:
wine ./Acrobat.exe
The console output I see at the moment the Preferences window appears is:
err:ole:CoGetClassObject class {b5f8350b-0548-48b1-a6ee-88bd00b4a5e7} not
registered
err:ole:create_server class {b5f8350b-0548-48b1-a6ee-88bd00b4a5e7} not
registered
fixme:ole:CoGetClassObject CLSCTX_REMOTE_SERVER not supported
err:ole:CoGetClassObject no class object {b5f8350b-0548-48b1-a6ee-88bd00b4a5e7}
could be created for context 0x15
err:ole:CoGetClassObject class {b5f8350b-0548-48b1-a6ee-88bd00b4a5e7} not
registered
err:ole:create_server class {b5f8350b-0548-48b1-a6ee-88bd00b4a5e7} not
registered
[[[...the above 4 lines are repeated 4 more times...]]]
fixme:ole:CoGetClassObject CLSCTX_REMOTE_SERVER not supported
err:ole:CoGetClassObject no class object {b5f8350b-0548-48b1-a6ee-88bd00b4a5e7}
could be created for context 0x15
err:comboex:COMBOEX_WindowProc unknown msg 042a wp=00050000 lp=00030100
err:comboex:COMBOEX_WindowProc unknown msg 042a wp=00050000 lp=00030110
fixme:system:SystemParametersInfoW Unimplemented action: 95
(SPI_GETSNAPTODEFBUTTON)
The "lp" values in the "unknown msg" error (2nd-last and 3rd-last lines above)
are the only things that change from one application launch to another.
I tried hard to gather more information about this bug with the command
"WINEDEBUG=+relay wine ./Acrobat.exe" but the only way I had to catch the
information was via the console's history, and that nearly brought my system to
its knees after it accumulated more than 170MB worth of data. Most of that
data was the result of KERNEL32.GetLastError, .FlsGetValue, and .SetLastError
messages repeatedly incessantly. If someone can tell me how I can prevent
those messages from appearing that would drop the size of the output.
One more thing to note: I tested for the same bug with Acrobat Reader V7.0.9
-- which is available for free from adobe.com -- and I see the exact same bug,
with the exact same console output. That may be useful to know if anyone is
interested in confirming this bug.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18302
Summary: Adobe Acrobat Pro 7: Preferences-Window is broken
Product: Wine
Version: 1.1.20
Platform: PC-x86-64
URL: http://ardownload.adobe.com/pub/adobe/acrobat/win/7x/7.0
/misc/AcTR7EFG.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: waltherbans(a)yahoo.de
When you clicking on "Edit"->"Preference" in Adobe Acrobat Professional 7 a
grey box will pop up, listing the Preference's categories in the left. Clicking
on an item gives a message box saying:
"The value of the magnification must be "Actual Size", "Fit Page", "Fit Width",
"Fit Visible", "Automatic", or a value between 8,33% and 6400%."
Noting else happens.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17120
Summary: Synful Orchestra: crash when run
Product: Wine
Version: 1.1.13
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntoskrnl
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: amranello(a)gmail.com
Wine crash when I run Synful Orchestra in dssi-vst.
Trial Synful Orchestra download http://www.synful.com/Download.htm
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29765
Bug #: 29765
Summary: Synful Orchestra 2.5.x tpkd.sys driver crashes due to
unimplemented function ntoskrnl.exe.IoStartNextPacket
Product: Wine
Version: 1.4-rc1
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: ntoskrnl
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Classification: Unclassified
Hello,
the driver crashes and app displays message box "Updated TPkd driver required,
and a reboot. Please reboot or reinstall the software."
--- snip ---
$ pwd
/home/focht/.wine/drive_c/Program Files/Common Files/Synful/Synful Orchestra/SO
$ wine ./SynfulOrchestraAuthorizer.exe
fixme:ntoskrnl:KeInitializeMutex stub: 0x112900, 0
...
fixme:ntoskrnl:IoGetDeviceObjectPointer stub: L"\\Device\\DebugMessageDevice"
1f01ff 0x53e514 0x53e510
fixme:ntoskrnl:KeInitializeEvent stub: 0x1110f0 1 0
fixme:ntoskrnl:KeInitializeEvent stub: 0x113970 1 0
fixme:ntoskrnl:IoRegisterDriverReinitialization stub: 0x7efff920 0x545d57
0x113710
fixme:ntoskrnl:__regs_KfRaiseIrql (2) stub!
wine: Call from 0x7b83924f to unimplemented function
ntoskrnl.exe.IoStartNextPacket, aborting
wine: Unimplemented function ntoskrnl.exe.IoStartNextPacket called at address
0x7b83924f (thread 0026), starting debugger...
--- snip ---
$ sha1sum synful_orchestra_252_32bit_setup.exe
489f3c24279ece8c220745efc5cf59caa22ec7d0 synful_orchestra_252_32bit_setup.exe
$ wine --version
wine-1.4-rc1-73-g57bb089
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16671
Summary: Revit Architecture 2009: Installation fails with call
not implemented
Product: Wine
Version: 1.1.11
Platform: PC-x86-64
URL: http://students.autodesk.com
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: netbox(a)pi-xi.net
Created an attachment (id=18299)
--> (http://bugs.winehq.org/attachment.cgi?id=18299)
wine output into console
AutoDesk Revit Architecture 2009 installation fails.
Everything works up to the part where the installer begins copying files. It
manages to install .NET 2.0 and after that reports that installation failed
with a "Call not implemented" -error. The produced log by the installer is very
vague.
This bug is an exact replica of installation failure with Revit Architecture
2008.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17161
Summary: Provide lodctr.exe tool to prevent misleading process
spawn failure console messages (.NET installers)
Product: Wine
Version: 1.1.13
Platform: Other
URL: http://www.microsoft.com/downloads/details.aspx?FamilyID
=262d25e3-f589-4842-8157-034d1e7cf3a3
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
a minor nuisance that can be easily fixed...
I had to add notes to .NET Framework appdb entries because people wrote about
messages which looked like install errors to them.
--- snip ---
wine: could not load L"C:\\windows\\system32\\lodctr.exe": Module not found
--- snip ---
Such failures are in fact harmless, not relevant to overall installer status.
"lodctr.exe" is a simple command line executable for loading performance data
into registry.
It is often called from .NET Framework v1.x, 2.x, 3.x installers.
MSDN info:
http://technet.microsoft.com/en-us/library/bb490926.aspxhttp://msdn.microsoft.com/en-us/library/aa934371.aspx
--- quote ---
The loading function of lodctr, LoadPerfCounterTextStrings, is declared in
Loadperf.h and exported from Loadperf.dll. You can call this function directly
from your install program.
The following example shows the syntax for this function.
LONG LoadPerfCounterTextStrings(
LPSTR lpCommandLine,
BOOL bQuietModeArg
);
The lpCommandLine parameter is the name of your .ini file.
The bQuietModeArg parameter is a Boolean value that specifies whether to
display output during the loading of the text strings for the counter.
--- quote ---
MSDN note suggests that this command line tool is only a thin wrapper which
simply calls LoadPerfCounterTextStrings() as workhorse, passing/forwarding the
command line as-is.
It should be easy to add this tool - even with LoadPerfCounterTextStringsA/W
being stubs - to silence installers which try to spawn it.
Typical installer logs:
--- snip ---
1: 0 2: C:\windows\system32\lodctr.exe
C:\windows\Microsoft.NET\Framework\v2.0.50727\_Networkingperfcounters.ini;18;C:\windows\system32\
3: 4: 5: 6: 7: 8: 9: 10:
Action 21:27:31: RunProcess. Installing Performance Counters for ".NET CLR
Networking"
...
--- snip ---
--- snip ---
...
1: 0 2: C:\windows\system32\lodctr.exe
"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\_TransactionBridgePerfCounters.ini";dummy;C:\windows\system32\ 3:
4: 5: 6: 7: 8: 9: 10:
1: C:\windows\system32\lodctr.exe
"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\_TransactionBridgePerfCounters.ini" 2:
1: 0 2: C:\windows\system32\lodctr.exe
"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\_TransactionBridgePerfCounters.ini";dummy;C:\windows\system32\ 3:
4: 5: 6: 7: 8: 9: 10:
1: 0 2: C:\windows\system32\lodctr.exe
"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication
Foundation\_TransactionBridgePerfCounters.ini";dummy;C:\windows\system32\ 3:
4: 5: 6: 7: 8: 9: 10:
...
--- snip ---
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19741
Summary: Autodesk Revit 2010 (64bit) installation fails
Product: Wine
Version: 1.1.27
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: winehq(a)pi-xi.net
Created an attachment (id=23088)
--> (http://bugs.winehq.org/attachment.cgi?id=23088)
Wine console output during the installation
As with earlier versions of Revit, also 2010 installation fails.
Everything works up to the part where the installer begins copying files.
Unlike with the earlier versions, this time there's an unhandled exception.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16956
Summary: Lexware: Installation of .Net 2.0 SP 1 fails
Product: Wine
Version: 1.1.11
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: koesterreich(a)gmx.net
Created an attachment (id=18728)
--> (http://bugs.winehq.org/attachment.cgi?id=18728)
The error-message
I am trying to install Lexware financial office Pro 2009 [1]
I installed some stuff via winetricks-20081223:
winetricks msxml3 jet40 mdac28 dotnet20 winxp
The installation fails with
"An error occured during the installation of the component Microsoft .Net
Framework 2.0 - Service Pack 1.
Errorcode: 1603
Installation of 'Microsoft .Net Framework 2.0 - Service Pack 1' failed.
The setup will be cancelled." (Translated from German,, see appended
Screenshot)
[1] Lexware in AppDB:
http://appdb.winehq.org/objectManager.php?sClass=application&iId=5505
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10376
Summary: recent winsock SO_REUSEADDR patch reveals parameter
handling problem in WS_setsockopt
Product: Wine
Version: CVS/GIT
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: wine-net
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
seems recent winsock SO_REUSEADDR patch
--- snip ---
URL:
http://source.winehq.org/git/wine.git/?a=commit;h=58b030c270e68c4e130a7decb…
Author: Kai Blin <kai.blin <at> gmail.com>
Date: Sat Nov 3 08:45:12 2007 +0100
ws2_32: Map SO_REUSEADDR.
BSD socket SO_REUSEADDR is not a complete match, but features like
"allow binding to a port immediately after closing it" seem to be
compatible.
--- snip ---
triggers a code path in WS_setsockopt() which leads to crash.
The cause is an application bug.
EvenBalance PunkBuster "PnkBstrA" service which creates local communication
sockets accidentally passes the value instead of value address to
WS_setsockopt().
The services can be installed and tested with their "pbsvc.exe" tool from
http://www.evenbalance.com/downloads/pbsvc/pbsvc.exe
--- snip ---
..
0015:trace:winsock:WS_setsockopt socket: 005c, level 0xffff, name 0x4, ptr 0x1,
len 1
0015:trace:seh:raise_exception code=c0000005 flags=0 addr=0x76587df5
0015:trace:seh:raise_exception info[0]=00000000
0015:trace:seh:raise_exception info[1]=00000001
0015:trace:seh:raise_exception eax=00000001 ebx=7658e11c ecx=00000002
edx=00000004 esi=0000ffff edi=00000001
0015:trace:seh:raise_exception ebp=617c57a4 esp=617c574c cs=0073 ds=007b
es=007b fs=0033 gs=003b flags=00210293
0015:trace:seh:call_stack_handlers calling handler at 0x7bc38810 code=c0000005
flags=0
--- snip ---
Their source code snippet probably looks like this:
--- snip ---
if (setsockopt( sock, .., ..., (char*)value, value_len) != SOCKET_ERROR)
--- snip ---
Instead of this:
--- snip ---
if (setsockopt( sock, .., ..., (char*)&value, value_len) != SOCKET_ERROR)
--- snip ---
Micro$oft "fixes" such crappy^H^H^H^H^H^Hbuggy applications by using SEH to
catch invalid pointer dereferencing.
If you execute a hand-crafted WS_setsockopt() test case with invalid pointer
value in Windows you will see something like this:
--- snip ---
First-chance exception at 0x719b5280 (mswsock.dll) in test.exe: 0xC0000005:
Access violation reading location 0x00000001.
--- snip ---
Returned last error is WSAEFAULT (bad pointer value/address supplied).
Solution: either wrap the whole function within structured exception handler
(SEH) or use IsBadReadPtr() on passed pointer and return WSAEFAULT if fishy.
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12954
Summary: Autodesk Design Review - Not Installing
Product: Wine
Version: 0.9.59.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: chris(a)ncode.com.au
Created an attachment (id=12700)
--> (http://bugs.winehq.org/attachment.cgi?id=12700)
Wine command line output
This product is an industry standard for communication of CAD designs. It is
also freeware from Adobe and can be downloaded from here if needed for
debugging:
http://download.autodesk.com/esd/designreview/SetupDesignReview2009.exe
It does not install. After starting and all the installation questions have
been answered, the installer crashes (see output in attached file)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41277
Bug ID: 41277
Summary: Multiple OpenGL software: refresh problems (last frame
skipped)
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: opengl
Assignee: wine-bugs(a)winehq.org
Reporter: nemyax(a)gmail.com
Distribution: ---
I'm seeing this issue in multiple OpenGL programs: Anim8or, 3DAce, Metasequoia,
model viewers, etc. Instead of the last frame, the OpenGL viewport shows the
last-but-one. This wrong frame stays on until something happens to refresh the
viewport.
I use the nVidia blob driver, the driver version doesn't seem to matter.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12999
Summary: 3d studio MAX 9 trial installer crash when starting up
RaySat service?
Product: Wine
Version: CVS/GIT
Platform: Other
URL: http://www.soft32.com/download_81704.html
OS/Version: other
Status: NEW
Keywords: download, Installer
Severity: normal
Priority: P2
Component: advapi32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
This seems to be the next problem after bug 12597:
rm -rf .wine
sh winetricks -q corefonts dotnet20 cc580 vcrun2003 vcrun6 wsh56
wine 3dsmax9Trial.exe
cd .wine/drive_c/3dsmax9Trial/
wine Setup.exe
aborts for me near the very end, saying
err:msi:ITERATE_StartService Failed to start service L"mi-raysat_3dsmax9_32"
err:msi:ITERATE_Actions Execution halted, action L"InstallFinalize" returned
1627
(even if you uncheck the "start raysat service" checkbox in the installer).
After that, starting wine, even with a bogus command, complains similarly:
$ wine-git/wine xyzzy
...
fixme:advapi:RegisterEventSourceA ((null),"RaySat_3dsmax9_32 Server"): stub
...
err:eventlog:ReportEventW L"(1458) RegisterServiceCtrlHandler: Service does not
exist (0x424)"
It seems that raysat_3dsmax9_32server.exe starts up, tries to do
trace:service:OpenServiceW 0x119d98 L"RaySat_3dsmax9_32Server" 32768
which fails, presumably because the service isn't up yet?
(Why isn't it doing CreateService? Perhaps it's probing
to make sure it's not already started up once. But if that's so, why
does it just exit without creating the service?)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12597
Summary: 3d studio MAX 9 trial installer crash
Product: Wine
Version: CVS/GIT
Platform: Other
URL: http://3dsmaxtrial.autodesk.com/3dsmax9trial/3dsmax9Tria
l.exe
OS/Version: other
Status: NEW
Keywords: download, Installer
Severity: normal
Priority: P2
Component: msi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
The trial installer gets further now, but still crashes.
With today's wine from git, I did
rm -rf .wine
sh winetricks corefonts dotnet20 cc580 vcrun2003
wine 3dsmax9Trial.exe
cd .wine/drive_c/3dsmax9Trial/
wine Setup.exe
After about five minutes, it got to the dialog that asks
questions; after entering your name, etc, it crashed like this:
Unhandled exception: page fault on read access to 0x00000001 in 32-bit code
(0xb7e5f588).
Backtrace:
=>1 0xb7e5f588 vsnprintfW+0x458(str=0xb43a7a, len=0x64, format=0x7ec7c700,
valist=) [libs/wine/string.c:376] in libwine.so.1 (0x0033eb2c)
2 0x7ec4ec63 MSI_QueryGetRecord+0xa3(db=0x12e2f0, fmt=0x7ec7c700)
[dlls/msi/msiquery.c:224] in msi (0x0033eb6c)
3 0x7ec2c33e msi_dialog_seltree_handler+0x6e(dialog=0xac8e68,
control=0x3a30620, param=) [dlls/msi/dialog.c:2073] in msi (0x0033eb9c)
4 0x7ec2f09b MSIDialog_WndProc+0x1db(hwnd=0xa0042, msg=0x4e, wParam=0x0,
lParam=0x33ef2c) [dlls/msi/dialog.c:3362] in msi (0x0033ecbc)
...
376 while (*striter)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11420
Summary: service control manager API problem: name of named
objects might differ (client vs. service process)
Product: Wine
Version: 0.9.54.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: advapi32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Created an attachment (id=10552)
--> (http://bugs.winehq.org/attachment.cgi?id=10552)
patch which fixes client vs. service SCM API when using named objects
Hello,
there seems to be a misconception in usage of names for named objects in
service control manager API.
Some people might have experienced such situation: wine hangs for several
seconds on startup (when starting services).
I usually disabled autostart type services (except for builtin ones) and the
problems went away.
Lately while fixing Microsoft Visual Studio .NET installers (2002/2003/2005)
this problem became more and more annoying because the installers and VS.NET
depend on some services, namely "debug manager" (service has to be running).
Consider the following snippet with "service_get_event_handle" trace message
added by me to highlight the problem:
0x9: client (net.exe)
0x11: service process (mdm.exe)
0x12: dispatcher thread
--- snip trace ---
..
0009:trace:advapi:OpenSCManagerW ((null),(null),0x000f003f)
0009:trace:advapi:sc_handle_alloc sc_handle type=0 -> 0x121450
0009:trace:advapi:OpenSCManagerW returning 0x121450 (access : 0x000f003f)
0009:trace:advapi:OpenServiceA 0x121450 "mdm" 983103
0009:trace:advapi:OpenServiceW 0x121450 L"mdm" 983103
0009:trace:advapi:sc_handle_alloc sc_handle type=1 -> 0x121488
0009:trace:advapi:OpenServiceW returning 0x121488
0009:trace:advapi:GetServiceDisplayNameA 0x121450 "mdm" 0x34ee48 0x34fe48
0009:trace:advapi:GetServiceDisplayNameW 0x121450 L"mdm" 0x1214b8 0x34ee08
The Machine Debug Manager service is starting.
0009:trace:advapi:StartServiceA (0x121488,0,(nil))
0009:trace:advapi:StartServiceW 0x121488 0 (nil)
0009:trace:advapi:LockServiceDatabase 0x121450
0009:trace:advapi:LockServiceDatabase returning 0x3c
0009:trace:advapi:service_start_process service_get_event_handle(L"mdm"): 0x40
0011:trace:advapi:LookupPrivilegeValueW L"",L"SeDebugPrivilege",0x34fc80
0011:trace:advapi:LookupPrivilegeValueW L"" -> 00000000-00000014
0011:trace:advapi:AdjustTokenPrivileges
0011:trace:advapi:StartServiceCtrlDispatcherA 0x34fc9c
0011:trace:advapi:service_run_threads Starting 1 pipe listener threads.
Services running as process 16
0012:trace:advapi:service_control_dispatcher 0x121ea8 L"Machine Debug Manager"
0012:trace:advapi:service_control_dispatcher service_get_event_handle(L"Machine
Debug Manager"): 0x48
0009:trace:advapi:UnlockServiceDatabase 0x3c
0009:trace:advapi:StartServiceW returning 0
The Machine Debug Manager service failed to start.
0009:trace:advapi:CloseServiceHandle 0x121488
0009:trace:advapi:sc_handle_destroy_service destroying service 0x121488
0009:trace:advapi:CloseServiceHandle 0x121450
0009:trace:advapi:sc_handle_destroy_manager destroying SC Manager 0x121450
000d:trace:advapi:service_run_threads last user process exited, shutting down
0011:trace:advapi:service_run_threads last user process exited, shutting down
--- snip trace ---
When a service is started, named objects are created to internally communicate
data/events from the service process (dispatcher) to client side SCM API and
vice versa.
Unfortunately there exist service proccesses which pass service names to
dispatcher table (StartServiceCtrlDispatcher) not matching the service name on
the client side (registry "Services" key).
--- snip dlls/advapi32/service.c ---
static DWORD WINAPI service_control_dispatcher(LPVOID arg)
{
service_data *service = arg;
LPWSTR name;
HANDLE pipe, event;
TRACE("%p %s\n", service, debugstr_w(service->name));
/* create a pipe to talk to the rest of the world with */
name = service_get_pipe_name(service->name); <--------- *problem*!
pipe = CreateNamedPipeW(name, PIPE_ACCESS_DUPLEX,
PIPE_TYPE_BYTE|PIPE_WAIT, 1, 256, 256, 10000, NULL );
if (pipe==INVALID_HANDLE_VALUE)
ERR("failed to create pipe for %s, error = %d\n",
debugstr_w(service->name), GetLastError());
HeapFree(GetProcessHeap(), 0, name);
/* let the process who started us know we've tried to create a pipe */
event = service_get_event_handle(service->name); <--------- *problem*!
SetEvent(event);
CloseHandle(event);
..
--- snip dlls/advapi32/service.c ---
As result, different named objects are created and signaled so the client side
can't communicate with the service side using named pipe and events.
This leads to infamous timeout problem (30 sec) and service startup failing.
In case of Microsoft Debug Manager the service is called "mdm" (registry).
The service process itself passes "Microsoft Debug Manager" as name to dispatch
table (see first trace).
Problem: how can both sides communicate a "common" name for named objects?
The service dispatcher part on the service side has only dispatch table data
available which doesn't help much.
I thought about this problem and found a feasible solution ... well call it
"hack" whatever.
If the client side API passes the service name in one of the process startup
parameter members before process creation, the service process' dispatcher
routine is able to access this data and create the named objects used for
communication.
I (ab)used startupinfo "title" member because only wine itself make exclusive
use of most service process startup parameters.
If not considered safe, use reserved/undoc fields...
With that patch applied the services in question start fine and can be
controlled using "net" commands.
No more hangs ;-)
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12079
Summary: VS.NET7.x/.NET SDK installers fail if re-executed due
to ACTION_StopServices being a stub
Product: Wine
Version: CVS/GIT
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: msi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
.NET Framework SDK, VS.NET 7.x. etc. install "helper" service(s) which get
automagically started.
The installers die if executed again (update/change config) because the running
service blocks file update.
--- snip ---
..
err:msi:ACTION_InstallFiles Failed to copy L"Z:\\mnt\\iso\\Program
Files\\Common Files\\Microsoft Shared\\VS7Debug\\msdbg2.dll" to L"c:\\Program
Files\\Common Files\\Microsoft Shared\\VS7Debug\\msdbg2.dll" (32)
err:msi:ITERATE_Actions Execution halted, action L"InstallFinalize" returned
1603
..
--- snip ---
James, if you find the time, please add "stop services" msi action
implementation (dlls/msi/action.c:ACTION_StopServices).
Although I have a patch, I constantly forget to apply it when tracking down
installer problems.
You could actually help to reduce my patch orgy :)
Thanks.
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12390
Summary: err:service:service_control_dispatcher failed to create
pipe for L"C-Dilla_CdaC11BA", error = 231
Product: Wine
Version: 0.9.58.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: amaramrahul(a)gmail.com
"Longman Dictionary of Contemporary English" (ISBN 0 582 50673 5) gets
installed properly from CD-ROM using wine. However when I try to run it using
wine, I get the below error in console:
# wine "C:\Program Files\Longman\LDOCE\ldoce.exe"
err:service:service_control_dispatcher failed to create pipe for
L"C-Dilla_CdaC11BA", error = 231
err:service:service_control_dispatcher failed to create pipe for
L"C-Dilla_CdaC11BA", error = 231
Then a pop-up appears with the message:
"This machine must be re-booted before this product will run correctly. Reboot
now?".
Upon clicking "Yes"/"No", the program exits. I think this has to do something
with copyright. Not sure about this though.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14594
Summary: crypt32.CryptHashMessage needed for VS.NET 2005
(deployment project type creation)
Product: Wine
Version: CVS/GIT
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: crypt32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
using project wizard to create a "setup/deployment" project type (msi), it
bails due to unimpl crypt32.CryptHashMessage
--- snip ---
..
003f:trace:loaddll:load_native_dll Loaded L"C:\\Program Files\\Microsoft Visual
Studio 8\\Common7\\Tools\\Deployment\\dpplg.dll" at 0x5d010000: native
003f:trace:loaddll:load_native_dll Loaded L"C:\\Program Files\\Microsoft Visual
Studio 8\\Common7\\Tools\\Deployment\\1033\\dpplgui.dll" at 0x5d380000: native
003f:trace:loaddll:load_native_dll Loaded L"C:\\Program Files\\Microsoft Visual
Studio 8\\Common7\\Tools\\Deployment\\dpedt.dll" at 0x5ce70000: native
003f:trace:loaddll:load_native_dll Loaded L"C:\\Program Files\\Microsoft Visual
Studio 8\\VJ#\\bin\\vjsplg.dll" at 0x6ca90000: native
003f:trace:loaddll:load_native_dll Loaded L"C:\\Program Files\\Microsoft Visual
Studio 8\\VJ#\\bin\\1033\\vjsplgui.dll" at 0x6cbc0000: native
003f:trace:seh:raise_exception code=80000100 flags=1 addr=0x7b8432e0
003f:trace:seh:raise_exception info[0]=60b7f840
003f:trace:seh:raise_exception info[1]=60b7fa01
wine: Call from 0x7b8432e0 to unimplemented function
crypt32.dll.CryptHashMessage, aborting
003f:trace:seh:call_stack_handlers calling handler at 0x5cdea7c5 code=80000100
flags=1
003f:trace:seh:call_stack_handlers handler at 0x5cdea7c5 returned 1
003f:trace:seh:call_stack_handlers calling handler at 0x5cdf1732 code=80000100
flags=1
..
--- snip ---
MSDN: http://msdn.microsoft.com/en-us/library/aa380203.aspx
--- stub test ---
031:Call
crypt32.CryptHashMessage(002fd208,00000001,00000001,002fd2e0,002fd2dc,002fd260,002fd248,002fd2f4,002fd2d8)
ret=5cdd6009
0031:fixme:crypt:CryptHashMessage (0x2fd208, 1, 1, 0x2fd2e0, 0x2fd2dc,
0x2fd260, 0x2fd248, 0x2fd2f4): stub
0031:Ret crypt32.CryptHashMessage() retval=00000000 ret=5cdd6009
--- stub test --
Simple stub seems to satisfy it.
For a better stub: MD5 is needed here, the supplied hash algorithm OID
(pHashPara.HashAlgorithm) is "1.2.840.113549.2.5"
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14571
Summary: ole32.CoGetCallerTID needed for VS.NET 2005
Product: Wine
Version: CVS/GIT
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ole32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
keep the VS.NET 2005 IDE for ~10 secs open and it will crash due to this bug.
--- snip ---
0026:Call user32.InSendMessage() ret=500891c3
0026:Ret user32.InSendMessage() retval=00000000 ret=500891c3
0026:Call KERNEL32.RaiseException(80000100,00000001,00000002,0032f618)
ret=608a4d85
0026:trace:seh:raise_exception code=80000100 flags=1 addr=0x7b8432e0
0026:trace:seh:raise_exception info[0]=608a4e20
0026:trace:seh:raise_exception info[1]=608a4e2a
wine: Call from 0x7b8432e0 to unimplemented function ole32.dll.CoGetCallerTID,
aborting
0026:trace:seh:call_stack_handlers calling handler at 0x506a8ab0 code=80000100
flags=1
--- snip ---
MSDN info here: http://msdn.microsoft.com/en-us/library/ms680683(VS.85).aspx
Implementation is straight forward (minus remote), all the info is there.
I've already verified with a patch.
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18500
Summary: ntdll.NtQueryInformationProcess: provide simple
ProcessDebugObjectHandle info class handling,
returning "no debugger"
Product: Wine
Version: 1.1.21
Platform: Other
URL: http://www.exeinfo.go.pl/
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Hello,
this is a continuation of http://bugs.winehq.org/show_bug.cgi?id=12859#c7
The app queries for unimplemented "ProcessDebugObjectHandle" information class.
--- snip ---
...
0021:Call ntdll.NtSetInformationThread(fffffffe,00000011,00000000,00000000)
ret=004da0d5
0021:fixme:thread:NtSetInformationThread info class 17 not supported yet
0021:Ret ntdll.NtSetInformationThread() retval=c0000002 ret=004da0d5
0021:Call
0021:Call
ntdll.NtQueryInformationProcess(ffffffff,0000001e,c0000002,00000004,00000000)
ret=004da0e4
0021:fixme:ntdll:NtQueryInformationProcess (process=0xffffffff) Unimplemented
information class: ProcessDebugObjectHandle
0021:Ret ntdll.NtQueryInformationProcess() retval=c0000003 ret=004da0e4
...
--- snip ---
Wine already fakes info for such kind of classes, returning "no debugger".
Have a look at dlls/ntdll/process.c:NtQueryInformationProcess, ProcessDebugPort
how it's done and provide simple patch.
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12859
Summary: HideThreadFromDebugger in NtSetInformationThread
Product: Wine
Version: 0.9.60
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: readams(a)readams.net
Created an attachment (id=12555)
--> (http://bugs.winehq.org/attachment.cgi?id=12555)
Add HideThreadFromDebugger to winternl.h and to NtSetInformationThread
This API exists in the windows NtSetInformationThread for some reason.
The sensible thing to do in wine here seems to be to just ignore this call.
Patch attached is against 0.9.60.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21930
Summary: Free Ghost installer crashes during project building
in console
Product: Wine
Version: 1.1.39
Platform: x86
URL: http://www.ethalone.com/download/gi/GIFree.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ariafan(a)mail.ru
Created an attachment (id=26619)
--> (http://bugs.winehq.org/attachment.cgi?id=26619)
Test installation project
Try in console
wineconsole "c:\program files\Ethalone\Ghost Installer\Bin\GIBuild.exe"
test.gpr
Message is appeared during project building:
fixme:msvcrt:MSVCRT__sopen : pmode 0x81b6 ignored
and later
err:seh:setup_exception_record stack overflow 860 bytes in thread 003f eip
00406df5 esp 00240fd4 stack 0x240000-0x241000-0x340000
testsetup.exe was not created.
See test.gpr in attachment.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22176
Summary: Rocket Reader 8.3 fails to install
Product: Wine
Version: 1.1.16
Platform: x86
URL: ftp://rocketreader.com/rocketreaderv83.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lukasz.wojnilowicz(a)gmail.com
CC: julliard(a)winehq.org
Created an attachment (id=27054)
--> (http://bugs.winehq.org/attachment.cgi?id=27054)
WINEDEBUG=+relay on Wine 1.1.41-72-ge9be1b4
At installation, around 75%, the program displays an error (Error changing
registry data), after that it deletes all what it has installed. This error
doesn't appear on Wine 1.1.15 so it's regression. Regression test did give
1c91d54503f9b2afa513dc4dd79bf19bc9bad51a is the first bad commit
commit 1c91d54503f9b2afa513dc4dd79bf19bc9bad51a
Author: Alexandre Julliard <julliard(a)winehq.org>
Date: Wed Feb 18 14:44:17 2009 +0100
msvcrt: Don't try to duplicate invalid handles. Don't reset std handles if
we didn't set them.
:040000 040000 2abf5f9a82de1d29b1fccadc658fc3a956388ac4
86464380dfe4aca4c5c11ea2a539a1fc5def03b8 M dlls
Reverting this fault patch enables me to install Rocket Reader.
The program doesn't install on wine 1.1.41. In terminal there is
fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
fixme:sfc:SfcIsFileProtected ((nil), L"C:\\Program
Files\\RocketReaderV83\\french.qmc") stub
I'm attaching terminal output with +relay
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45887
Bug ID: 45887
Summary: I am trying to install MS office 2013 and when I run
wine setup.exe, I get this error
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: preethi1433(a)gmail.com
Distribution: ---
Created attachment 62394
--> https://bugs.winehq.org/attachment.cgi?id=62394
Backtrace
I have installed winehq and followed the steps on the wiki. Debian Jessie 8
causes this issue. exe perfectly executable in Windows.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.