http://bugs.winehq.org/show_bug.cgi?id=26600
Summary: Filemaker Pro2 under Wine
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gilles.l.auger(a)gmail.com
The program winevdm.exe has encountered a serious problem and must be closed.
We are sorry for this situation. This may be caused by an error in the program
or a default in Wine. This problem does not occur under Windows.
Le programme winevdm.exe a rencontré un problème sérieux et doit être fermé.
Nous sommes désolés pour le désagrément subi.
Cela peut être causé par une erreur dans le programme ou un défaut dans Wine.
Se problème ne se produit pas sous Windows.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13463
Summary: 000
Product: WineHQ Bugzilla
Version: unspecified
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P5
Component: bugzilla-unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: maty1206(a)maryanlinux.com
Wine can't uninstall the trial of Filemaker Pro.
Please, improve this feature.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14844
Summary: Filemaker 9- freezes when loading .fmx plugins
Product: WineHQ Apps Database
Version: unspecified
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: appdb-unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mosborne(a)ashs.school.nz
Filemaker 9 runs perfectly in Wine until it tries to load plugins, such as
Troi_*.fmx
Normally these extensions are (I think) located in the Application data folder
in windows so Wine might be looking for them in the wrong place. Ideas?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12356
Summary: FileMaker 8.5 and 9 crash after a few second on startup
Product: Wine
Version: 0.9.58.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: winedbg
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mihael.krauth(a)gmail.com
FileMaker 8.5 and 9 crash after a few second on startup, just afer displaying
the splash screen.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14963
Summary: Filemaker pro 8.5 apps crash easily (version 6.0 didn't)
Product: Wine
Version: 1.0.0
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: julien.puydt(a)laposte.net
Created an attachment (id=15570)
--> (http://bugs.winehq.org/attachment.cgi?id=15570)
Crash trace
A small app (named rech_pb.exe) to query a database "written" with filemaker
pro 8.5 shows empty dropdown menus, and can crash pretty easily when used ; it
shows many :
fixme:ole:OleQueryLinkFromData (0x13a448),stub!
and many :
fixme:font:SetMapperFlags (0x8258, 0x00000000): stub - harmless
An older version of the same app "written" with filemaker pro 6.0 works
correctly, but shows many :
fixme:ole:OleQueryLinkFromData (0x13a448),stub!
so I guess those warnings are pretty harmless, but the "harmless" ones aren't
that much.
See the attached log of a crash of the newer version.
Hope that helps.
PS: I'm using debian unstable's 1.0.0-1 package, in case the precision can help
PS2: I'm probably tech-savvy enough to install svn+patch if needed
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35586
Bug ID: 35586
Summary: Filemaker 8.5 v2 crashes
Product: Wine
Version: 1.5.27
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: cb750nice(a)free.fr
Classification: Unclassified
Created attachment 47517
--> http://bugs.winehq.org/attachment.cgi?id=47517
Backtrace.txt
I use Wine only to use FileMaker Pro. It works ordinarly quite good. But
sometimes it crashes. It never arrived when I was working on it.
It never arrived under Windows XP on the same computer.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9773
Summary: FileMaker crashes
Product: WineHQ Apps Database
Version: unspecified
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: website-bugs
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hhalvors(a)princeton.edu
Created an attachment (id=8211)
--> (http://bugs.winehq.org/attachment.cgi?id=8211)
partial backtrace
Wine 0.9.39, trying to run FileMaker Pro 8.5. Installation went great.
I can start FileMaker, and I can open a database. However, when I click on the
screen, FileMaker crashes. I have attached a partial backtrace.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33452
Bug #: 33452
Summary: Can't type after entering pop-up list in Filemaker Pro
5
Product: Wine
Version: 1.5.28
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: DonJaime(a)freenet.de
Classification: Unclassified
After entering a pop-up list in FileMaker Pro 5.0v3 it is no longer possible to
enter text, either in the pop-up list field itself or in any other field after
leaving it. After running a script, changing to another window and back again
or to layout mode and back again you can type again.
Control keys do not stop working. The tab key works to leave a pop-up field but
not once you have entered a normal text field.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21974
Summary: FileMaker v10.0v1 - Crash when loading a new datatable
Product: Wine
Version: 1.1.38
Platform: x86
URL: http://www.filemaker.com
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: newsletter(a)Schiermeier-Software.de
Created an attachment (id=26679)
--> (http://bugs.winehq.org/attachment.cgi?id=26679)
some databases for testing - use 'tanzkalender.fp7'
Regression since wine-v1.1.38 up to now (v1.1.40) - in wine-v1.1.37 was
working:
result of my regression test:
---
aa6c4d4e92cdb944e53a0c36819621a6875f1e61 is the first bad commit
commit aa6c4d4e92cdb944e53a0c36819621a6875f1e61
Author: Alexandre Julliard <julliard(a)winehq.org>
Date: Sat Jan 23 14:15:43 2010 +0100
configure: Add specific creation macros for the various types of makefiles.
:100644 100644 ce3941e561ec8f3cde50ca78bf170eb1babb05e6
b30e41e0b5c3af75186553099a0053025ca95f9a M aclocal.m4
:100644 100644 01cf3a78f71cf0d4762dae97e30efa57d9068ea0
7d5a29a821c2d5a4d9855274718df77ed12085f1 M configure.ac
:040000 040000 d1bd1e023c24afddd345582dd59cb421b57397da
795ce110d7a0c2500740bb09508ee2f5c4f0fb02 M tools
---
(I don't trust realy in this result - so I include some screenshots and some
testdatas.)
The application was working with the databases until the wine-version v1.1.37.
Steps to reproduce the crash:
1.) database 'tanzkalender' (description is in English, data in German)
2.) click on the button 'call HTML-Export'
3.) crash - you can see the new, just loaded layout in the background.
The button 'call HTML-Export' calls a script which load a new layout with the
datas of the actual datatable.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25461
Summary: Filemaker 11 crashes sometimes - Database window gets
permanent focus (stays forced in foreground)
Product: Wine
Version: 1.3.8
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: emerson.prado.eng(a)gmail.com
Created an attachment (id=32411)
--> (http://bugs.winehq.org/attachment.cgi?id=32411)
Terminal log beginning in an exception
Filemaker Pro 11 is crashing during normal use. It's intermittent - sometimes I
can use it the whole day without problems, sometimes it halts in less than 10
minutes. But I still can't tell whether a specific activity causes it.
When it crashes, even if Filemaker isn't focused, the database window always
stays on top, until Filemaker is forcefully closed.
There is a pop-up error message, which can only be read by manually setting it
on top (right-clicking its taskbar icon and selecting "always on top").
I'm attaching a partial Terminal log. I can't get it full because it's bigger
than the Terminal buffer. But I was lucky to apparently get everything from the
exception on, and this is what I attached here.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25377
Summary: Filemaker 11 can't access / doesn't show remote
databases / servers - both in "Local hosts" and
"Favorite hosts"
Product: Wine
Version: 1.2.1
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: emerson.prado.eng(a)gmail.com
Created an attachment (id=32277)
--> (http://bugs.winehq.org/attachment.cgi?id=32277)
Full terminal output from running FM 11
When I try to open a remote db, my server doesn't appear in the "Local hosts".
If I manually add my server in the "Favorite hosts", the remote files aren't
shown.
I tried all Windows versions from XP up.
The attachment is the full terminal output from running Filemaker (the main
menu icon doesn't work, so I run FM from Terminal).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25448
Summary: Filemaker Pro 11 can't be started from Linux main menu
icon - Invalid or incorrect link
Product: Wine
Version: 1.3.8
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: emerson.prado.eng(a)gmail.com
Created an attachment (id=32388)
--> (http://bugs.winehq.org/attachment.cgi?id=32388)
Filemaker Pro 11 starter link inside "Windows" Start menu
Clicking in the Filemaker icon in the main menu just brings in an error message
window saying "File not found". Starting from Terminal works OK.
The link in the main menu points to:
env WINEPREFIX="/home/<user>/.wine" wine C:\\windows\\command\\start.exe /Unix
/home/<user>/.wine/dosdevices/c:/users/<user>/Menu\
Iniciar/Programas/FileMaker\ Pro.lnk
I'm sending attached the Filemaker Pro.lnk file.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22469
Summary: FileMaker Pro 11: Text is upside down when builtin
gdiplus is used
Product: Wine
Version: 1.1.43
Platform: x86
URL: http://www.filemaker.com/
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wylda(a)volny.cz
Created an attachment (id=27526)
--> (http://bugs.winehq.org/attachment.cgi?id=27526)
Filemaker pro 11
Text in boxes is upside down, when the box is selected. This doesn't happen
when native gdiplus is used. Attachment shows that better.
To reproduce:
1. Download the trial version
2. Download demo data http://bugs.winehq.org/attachment.cgi?id=26679
3. Run "wine FileMaker\ Pro.exe" and load data from step 2.
4. Click on any textbox, to make it upside down
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45962
Bug ID: 45962
Summary: FileMaker Pro 16 crashes on startup
Product: Wine
Version: 3.17
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: larrycoleman.email(a)gmail.com
Distribution: ---
Created attachment 62513
--> https://bugs.winehq.org/attachment.cgi?id=62513
The "Show Details" from when FileMaker crashes
I am running on Ubuntu 16.04. I installed WineHQ 3.17. FileMaker Pro requires
.Net Framework. I used Winetricks to install .NET Framework 4.6.1. I then
installed FileMaker Pro 16.
When trying to run FileMaker, I get a "Program Error" message "The program
FileMaker Pro.exe has encountered a serious problem and needs to close. We are
sorry for the inconvenience."
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42443
Bug ID: 42443
Summary: MyDiff Program doesn't launch
Product: Wine
Version: 1.6.2
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: le.pocher.julien(a)gmail.com
Distribution: ---
Created attachment 57275
--> https://bugs.winehq.org/attachment.cgi?id=57275
Bug backtrace
The executable MyDiff.exe file won't run. See backtrace.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33287
Bug #: 33287
Summary: Filemaker Pro12 crashes when opening database file
Product: Wine
Version: 1.4.1
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jmeador(a)momentapharma.com
Classification: Unclassified
I can install Filemaker Pro 12 with a valid serial number into BioLinux 7,
which is Ubuntu 12.04. Wine was installed as 4.1 via the Ubuntu Software Center
and I cannot get the dev version of 1.5 to install via this or the commandline.
It says that the binaries are not available.
When running from the commandline, I get this output:
:~$ wine "c:\program files (x86)\FileMaker\FileMaker Pro 12\FileMaker Pro.exe"
p11-kit: couldn't load module:
/usr/lib/i386-linux-gnu/pkcs11/gnome-keyring-pkcs11.so:
/usr/lib/i386-linux-gnu/pkcs11/gnome-keyring-pkcs11.so: cannot open shared
object file: No such file or directory
When I look for this directory in /usr/lib/i386-linux-gnu/ there are no files
or folders called pkcs11 so perhaps this is missing from the wine1.4 installer?
When installing, the installer gets to the end and then crashes and says the
registration program cannot run, however, the program will start and appears to
run ok until you open a database file, and I have tried several. Once I try to
open a file, it crashes. The FileMaker Pro binary and other files are installed
into /Program File (x86)/FileMaker/...
I am attaching the backtrace file as well which was obtained from running the
program from the graphical method.
The computer is an HP Xeon processor with 64-bit Ubuntu 12.04 and 128 GB ram
Thanks for any help you can provide.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39288
Bug ID: 39288
Summary: Filemaker Pro 12 crashes when trying to open a
Filemaker database file
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: ben(a)berwers.org
Distribution: ---
Created attachment 52366
--> https://bugs.winehq.org/attachment.cgi?id=52366
Filemaker Pro 12 crashes when trying to open a Filemaker file.
Filemaker Pro 12 has a serious problem and stops when I try to open any file.
Please see attached backtrace report when opening a testfile.
By the way Filemaker Pro 6 works fine. Unfortunately I cannot switch back to
the 6-version.
Hope you can help me, what goes wrong.
Thanks in advance,
Ben Berwers
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=44355
Bug ID: 44355
Summary: FaceIt client : www.faceit.com/client
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: adil3.7896(a)gmail.com
Distribution: ---
Created attachment 60250
--> https://bugs.winehq.org/attachment.cgi?id=60250
Backtrace of the issue
The FaceIt client was running properly when it suddenly closed with the
following message: ...have to close the application due to Database issues.
Please check Wine Application Database for more information.
Here's the backtrace (attachment)
please fix?
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41713
Bug ID: 41713
Summary: Explorer.exe is wrong when started from the process
creating the Wine prefix
Product: Wine
Version: 1.9.8
Hardware: x86
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: fgouget(a)codeweavers.com
Distribution: ---
To reproduce this do the following:
rm -rf ~/.wine
cd dlls/shell32/tests
rm shelldispatch.ok
make shelldispatch.ok
This normally results in the following failure:
shelldispatch.c:624: Test failed: got 0x80040152
Which corresponds to the following line:
ok(hr == S_OK, "got 0x%08x\n", hr);
/* TODO: remove when explorer startup with clean prefix is fixed */
if (hr != S_OK)
return;
The workaround is to ensure the Wine prefix has been created before running the
test:
rm -rf ~/.wine
./wine hostname
./server/wineserver -w
cd dlls/shell32/tests
rm shelldispatch.ok
make shelldispatch.ok
Note that wt-daily is now implementing this workaround (see
https://github.com/fgouget/wt-daily).
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45232
Bug ID: 45232
Summary: TIDAL can't be installed with exe installer
Product: Wine
Version: 3.8
Hardware: x86
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: ieframe
Assignee: wine-bugs(a)winehq.org
Reporter: dark.shadow4(a)web.de
Distribution: ---
Created attachment 61461
--> https://bugs.winehq.org/attachment.cgi?id=61461
Wine log
The program instantly crashes, I assume due to the missing ieframe interface.
Needs wine-staging patches, else it complains about being run as administrator.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45749
Bug ID: 45749
Summary: Visual Studio 2017 Installer fails due to
node.js/libuv listen(named pipe) error
Product: Wine
Version: 3.14
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: jimbo1qaz(a)gmail.com
Distribution: ---
Created attachment 62190
--> https://bugs.winehq.org/attachment.cgi?id=62190
Visual Studio Installer logs (mostly useless)
Running Kubuntu 18.04 64-bit. I created a 32-bit .wine32 prefix, installed
dotnet46 via winetricks, then the Build Tools for Visual Studio installer
(https://visualstudio.microsoft.com/downloads/#build-tools-for-visual-studio…
) (which shares the core with VS2017 installer. It's written in node.js and
involves multiple processes communicating via what the source describes as
"pipe"s).
The error is "Hub Controller process exited prematurely with exit code 1
(NodeUncaughtFatalException)."
Interestingly, the installer's source is user-readable and located in
WINEPREFIX / drive_c/Program Files/Microsoft Visual
Studio/Installer/resources/app/node_modules/microsoft-servicehub/host/. I was
able to edit the .js files to add control flow logging:
const fs = require('fs');
function logg(val, args){
fs.writeFileSync("C:\\"+process.hrtime()[1] + '_'+val, ""+args,
function(err) {});
}
Installer seems to be codenamed "microsoft-servicehub". Strangely, many of the
Installer files appear to test for Windows and/or *nix, despite VS being
Windows-only. It also references open-source VS Code, but I was unable to find
any hits when Googling for quoted strings.
----------
The error message "Hub Controller process exited prematurely with exit code" is
raised from within "drive_c/Program Files/Microsoft Visual
Studio/Installer/resources/app/node_modules/microsoft-servicehub/controllerConnection.js":
ControllerConnection.prototype.startController `var connectPromise` fails,
calling `function (err)` to spawn a process (which crashes).
ControllerConnection.prototype.onControllerProcessExited is responsible for
noticing the process has terminated, and raising the exception.
---------
The actual crash originates from "drive_c/Program Files/Microsoft Visual
Studio/Installer/resources/app/node_modules/microsoft-servicehub/host/HubController.js".
HubController.js is executed by several distinct processes, and `process.pid`
is the same within `function HubController()` and the global scope.
I systematically replaced all calls to `logger.error()` (info, etc.) to
`logg()` (since Logger.error() called within subprocess did not show up in
Visual Studio's debug logs). I get two sequentially numbered files, 1
millisecond apart:
"429988399_Successfully started server on pipe
5d74f51d8cc5d690c261c26d3e9e3408e060bd352875558b9320be9c213e0610"
"430873100_Terminating controller due to some unknown error: " with contents
"listen EINVAL
\\?\pipe\5d74f51d8cc5d690c261c26d3e9e3408e060bd352875558b9320be9c213e0610"
This error is thrown by `function retryStartServer`. `e.code` is EINVAL, while
the code only handles `e.code === ec.EADDRINUSE.code`.
Looking at
https://stackoverflow.com/questions/11040460/get-the-listen-einval-when-sta…
suggests:
> > EINVAL The socket is already connected.
> Make sure something isn't already listening on that port.
`man errno` suggests otherwise: > EINVAL Invalid argument (POSIX.1-2001).
Adding `|| e.code === ec.EINVAL.code` and commenting `process.platform ===
'win32' ||` sends the installer into an endless "kill and restart
HubController" loop, which isn't what we want.
Extra notes on control flow at
https://gist.github.com/jimbo1qaz/1c972422fd5c31706920b9be5c2a0f42#server
--------
The `EINVAL` error comes with a node.js stack trace:
https://gist.github.com/jimbo1qaz/1c972422fd5c31706920b9be5c2a0f42#file-net…
(The hexadecimal path originates from
https://gist.github.com/jimbo1qaz/1c972422fd5c31706920b9be5c2a0f42#determin…
)
https://github.com/nodejs/node/blob/68dff4a67b7222770f90fc5d9bdd884f8db4a24…
`const ex = new Error(`${syscall} ${code}${details}`);`
"listen EINVAL
\\?\pipe\5d74f51d8cc5d690c261c26d3e9e3408e060bd352875558b9320be9c213e0610"
I think the call which failed is `listen`, which returns EINVAL for some
reason.
------------
Comparing my stack trace with node.js source code (node.dll 8.9.3):
`Server.listen (net.js:1487:5)` =
https://github.com/nodejs/node/blob/v8.9.3/lib/net.js#L1487
- listenInCluster(server=this, address=pipeName, port=-1, addressType=-1,
backlog=backlog, fd=undefined, exclusive=options.exclusive);
`listenInCluster (net.js:1392:12)` =
https://github.com/nodejs/node/blob/v8.9.3/lib/net.js#L1392
- server._listen2(=address, =port, =addressType, =backlog, =fd);
Unpeeling layers of abstraction on top of Windows named pipes:
`Server.setupListenHandle [as _listen2] (net.js:1351:14)` =
https://github.com/nodejs/node/blob/v8.9.3/lib/net.js#L1351
(Bullet points are not in stack trace, but I assume they executed)
- `handle = new Pipe(PipeConstants.SERVER);`
https://github.com/nodejs/node/blob/v8.9.3/lib/net.js#L1267
- `const { Pipe } = process.binding('pipe_wrap');` which refers to C++ code
at https://github.com/nodejs/node/blob/v8.9.3/src/pipe_wrap.cc
- pipes are handled by https://github.com/libuv/libuv
- `var err = this._handle.listen(backlog || 511);` is the operation which fails
=
https://github.com/nodejs/node/blob/8a44289089a08b7b19fa3c4651b5f1f5d1edd71…
- Routes to https://github.com/nodejs/node/blob/v8.9.3/src/pipe_wrap.cc#L154
- which calls uv_listen(). `return uv_translate_sys_error(err);` and EINVAL is
located at https://github.com/libuv/libuv/blob/v1.x/src/win/error.c#L101 ...
There are 7 Win32 errors all mapping to UV_EINVAL==EINVAL, but only WSAEINVAL
can happen.
- uv_listen() either [assert(0) and sets err=ERROR_INVALID_PARAMETER] (I hope
not), calls uv_tcp_listen (I hope not)
- Most likely calls uv_pipe_listen() =
https://github.com/libuv/libuv/blob/1391a3d9d0996fcf1a116a9c6c58e8b1c730319…
- It has 4 return paths, only `if (!(handle->flags & UV_HANDLE_BOUND)) { return
WSAEINVAL;` is happening =
https://github.com/libuv/libuv/blob/1391a3d9d0996fcf1a116a9c6c58e8b1c730319…
- What initializes `handle->flags` without |=UV_HANDLE_BOUND?
ok i'm getting a headache
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45998
Bug ID: 45998
Summary: 64-bit FACEIT Anti-cheat client claims "Your system is
out of date, you are missing important Windows
updates!" (needs
'wintrust.CryptCATAdminAcquireContext2' stub)
Product: Wine
Version: 3.18
Hardware: x86-64
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: wintrust
Assignee: wine-bugs(a)winehq.org
Reporter: focht(a)gmx.net
Distribution: ---
Hello folks,
as it says.
Download: https://anticheat-client.faceit.com/FACEITInstaller_64.exe
--- snip ---
$ pwd
/home/focht/.wine/drive_c/Program Files/FACEIT AC
$ WINEDEBUG=+seh,+relay wine ./faceitclient.exe >>log.txt 2>&1
...
002c:Call KERNEL32.LoadLibraryA(141215440 "wintrust.dll") ret=1400b1653
002c:Ret KERNEL32.LoadLibraryA() retval=7fd071b90000 ret=1400b1653
002c:Call KERNEL32.GetProcAddress(7fd071b90000,141215450
"CryptCATAdminAcquireContext2") ret=1400b1670
002c:Ret KERNEL32.GetProcAddress() retval=00000000 ret=1400b1670
002c:Call KERNEL32.FreeLibrary(7fd071b90000) ret=1400b167c
002c:Ret KERNEL32.FreeLibrary() retval=00000001 ret=1400b167c
002c:Call ntdll.RtlAllocateHeap(00010000,00000000,00000050) ret=1411adc3c
002c:Ret ntdll.RtlAllocateHeap() retval=000b09e0 ret=1411adc3c
002c:Call user32.MessageBoxA(00000000,000b09e0 "Your system is out of date, you
are missing important Windows updates!",00000000,00000010) ret=1400edd5d
...
--- snip ---
Microsoft Docs:
https://docs.microsoft.com/en-us/windows/desktop/api/mscat/nf-mscat-cryptca…
--- quote ---
The CryptCATAdminAcquireContext2 function acquires a handle to a catalog
administrator context for a given hash algorithm and hash policy.
You can use this handle in subsequent calls to the following functions:
CryptCATAdminAddCatalog
CryptCATAdminEnumCatalogFromHash
CryptCATAdminRemoveCatalog
This function has no associated import library. You must use the LoadLibrary
and GetProcAddress functions to dynamically link to Wintrust.dll.
Syntax
BOOL CryptCATAdminAcquireContext2(
HCATADMIN *phCatAdmin,
const GUID *pgSubsystem,
PCWSTR pwszHashAlgorithm,
PCCERT_STRONG_SIGN_PARA pStrongHashPolicy,
DWORD dwFlags
);
--- quote ---
It's Windows 8+ API.
With a FIXME stub that prints parameters, returning FALSE:
--- snip ---
...
0064:Call KERNEL32.LoadLibraryA(141215440 "wintrust.dll") ret=1400b1653
0064:Ret KERNEL32.LoadLibraryA() retval=7f9b71860000 ret=1400b1653
0064:Call KERNEL32.GetProcAddress(7f9b71860000,141215450
"CryptCATAdminAcquireContext2") ret=1400b1670
0064:Ret KERNEL32.GetProcAddress() retval=7f9b718680d0 ret=1400b1670
0064:Call KERNEL32.FreeLibrary(7f9b71860000) ret=1400b167c
0064:Ret KERNEL32.FreeLibrary() retval=00000001 ret=1400b167c
--- snip ---
I didn't see any call to the stub, so one might get away even with
auto-generated unimplemented stub.
The client executable has some anti-debug trickery and custom obfuscation
scheme. Crashes later due to other insufficiencies though.
$ sha1sum FACEITInstaller_64.exe
ed8f8c2f6ec2d113bed882faa9d8b8a7a3b56a3c FACEITInstaller_64.exe
$ du -sh FACEITInstaller_64.exe
85M FACEITInstaller_64.exe
$ wine --version
wine-3.18
Regards
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=43155
Bug ID: 43155
Summary: WarBR: (WarS game v5.5 p4) Crashes on login
"fixme:wmp:PersistStreamInit_Load
(0x1c1f58)->(0x1362090)"
Product: Wine
Version: 2.10
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: rodrigodavy(a)gmail.com
Distribution: ---
In wine 2.9 I could login into the game using native wmvcore.dll
In wine 2.10 the game doesn't login with both the wine and the native dll
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.