https://bugs.winehq.org/show_bug.cgi?id=56104
Bug ID: 56104
Summary: Combobox - list shall not close when a key is pressed
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: comctl32
Assignee: wine-bugs(a)winehq.org
Reporter: kyle.kcsoftwares(a)gmail.com
Distribution: ---
Combobox - list shall not close when a key is pressed. It should put selection
to the first entry of the list starting by this letter (then moving to the
next, etc...) but NOT automatically close the list
Fix : in COMBO_WindowProc, if list is dropped (CBF_DROPPED) and a key is
pressed, then the "no roll up" (CBF_NOROLLUP) shall be set
case WM_CHAR:
case WM_IME_CHAR:
{
HWND hwndTarget;
/* This is the fix */
if (lphc->wState & CBF_DROPPED)
lphc->wState |= CBF_NOROLLUP;
/* End of the fix */
if ( lphc->wState & CBF_EDIT )
hwndTarget = lphc->hWndEdit;
else
hwndTarget = lphc->hWndLBox;
return SendMessageW(hwndTarget, message, wParam, lParam);
}
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=48390
Bug ID: 48390
Summary: Unable to launch War Thunder 64bit with EAC... Also
Pulse audio instead of ALSA
Product: Wine
Version: 4.21
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: ryanrkpm(a)yahoo.com
Distribution: ---
Created attachment 66153
--> https://bugs.winehq.org/attachment.cgi?id=66153
wine ./launcer.exe
https://forum.warthunder.com/index.php?/topic/473521-running-acesexe-with-w…
I can run 32 bit version of the game, but that doesn't launch with EAC. 64 bit
client must be used. or launcher program. This is what I get. Also inside
game (32 bit) it doesn't recognize ALSA and uses PULSE AUDIO, which I don't
have. I don't know if this'll carry over to 64 bit version or not as it
doesn't work.
But we need EAC to initialize to play the game now.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54240
Bug ID: 54240
Summary: wineserver crash when calling an rpc stub
Product: Wine
Version: 8.0-rc2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: rpc
Assignee: wine-bugs(a)winehq.org
Reporter: memory.thrasher(a)gmail.com
Distribution: ---
"M.A.R.S." game would immediately crash when attempting to launch due to a
missing (stubbed) function. I implemented the function in the linked merge
request. Game submitted to app db, also linked below.
https://gitlab.winehq.org/wine/wine/-/merge_requests/1888https://appdb.winehq.org/objectManager.php?sClass=version&iId=41241&iTestin…
With the above patch, the game progresses to a splashscreen before crashing
without any helpful errors, likely due to "easy anti-cheat" software. With
tracing enabled, I was able to confirm the rpc endpoint generated by my patch
was functioning correctly.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45375
Bug ID: 45375
Summary: Halo Online: Weird black display problems.
Product: Wine
Version: 3.10
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: conmanx360(a)gmail.com
Distribution: ---
This issue happens on certain maps in Halo Online depending on what your
current Z position is. Not all maps suffer from it, only certain ones do. If
you're above the Z position that it begins happening at, everything below
renders normally, but once you go below it, a portion of the frame becomes
black. It seems to be in a pattern. Not all objects are blacked out, either. So
there must be some sort of "priority".
Image examples here: https://imgur.com/a/176i4xr
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=55105
Bug ID: 55105
Summary: libHttpClient requires
WINHTTP_OPTION_CLIENT_CERT_ISSUER_LIST support
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: winhttp
Assignee: wine-bugs(a)winehq.org
Reporter: flibitijibibo(a)gmail.com
Distribution: ---
libHttpClient is the web socket abstraction layer for Xbox Live titles on
various platforms; on Windows it uses winhttp for http sources. Two example
games using this library are Gears 5 and Halo: The Master Chief collection.
One part of the implementation handles certificate authentication; in
particular it handles ERROR_WINHTTP_CLIENT_AUTH_CERT_NEEDED, which according to
MSDN should be handled by calling WinHttpQueryOption with
WINHTTP_OPTION_CLIENT_CERT_ISSUER_LIST, so that it can attempt to find a
relevant certificate chain and re-attempt the connection if a cert is found.
Luckily, libHttpClient is open source, so the exact block that does this can be
found here:
https://github.com/microsoft/libHttpClient/blob/1c8386866fb180dd31890186291…
As of the latest Git revision, Wine does not handle this parameter, so the
default case is tripped:
https://gitlab.winehq.org/wine/wine/-/blob/81859c9af70aa5ed6da3060488d1815a…
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=55106
Bug ID: 55106
Summary: libHttpClient requires CertFindChainInStore support
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: crypt32
Assignee: wine-bugs(a)winehq.org
Reporter: flibitijibibo(a)gmail.com
Distribution: ---
libHttpClient is the web socket abstraction layer for Xbox Live titles on
various platforms; on Windows it uses winhttp for http sources. Two example
games using this library are Gears 5 and Halo: The Master Chief collection.
One part of the implementation handles certificate authentication; in
particular it attempts to search for a specific cert chain from the "MY" store
via CertFindChainInStore, and uses the results of this search to determine
whether or not it should try to connect again.
Luckily, libHttpClient is open source, so the exact block that does this can be
found here:
https://github.com/microsoft/libHttpClient/blob/1c8386866fb180dd31890186291…
As of the latest Git revision, CertFindChainInStore is a stub, and so the
search will always fail:
https://gitlab.winehq.org/wine/wine/-/blob/81859c9af70aa5ed6da3060488d1815a…
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46816
Bug ID: 46816
Summary: Incorrect behavior of SHFileOperation
Product: Wine
Version: 4.0
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: shell32
Assignee: wine-bugs(a)winehq.org
Reporter: rndltrz(a)hotmail.com
Distribution: ---
Behavior of SHFileOperation differs from windows.
Here is some trivial code that copies a directory:
const wchar_t *const sourceDir = L"C:\\TestDir\0\0";
const wchar_t *const destDir = L"C:\\TestDir2\0\0";
SHFILEOPSTRUCTW do_copy = { 0 };
do_copy.wFunc = FO_COPY;
do_copy.fFlags = FOF_NOCONFIRMMKDIR | FOF_NOCONFIRMATION | FOF_NO_UI;
do_copy.pFrom = sourceDir;
do_copy.pTo = destDir;
SHFileOperationW(&do_copy);
If you add trailing backslash to destDir:
const wchar_t *const destDir = L"C:\\TestDir2\\\0\0";
On Windows result would be the same. However, on WINE+linux result would be
different:
no backslashes:
$ls TestDir
file.txt Subdir1 Subdir2
$ls TestDir2
file.txt Subdir1 Subdir2
with trailing backslash:
$ls TestDir
file.txt Subdir1 Subdir2
$ls TestDir2
TestDir
This causes issues with programs that rely on Windows behavior.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47105
Bug ID: 47105
Summary: [REGRESSION] FrostyModManager cant launch games
Product: Wine
Version: 4.7
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: advpack
Assignee: wine-bugs(a)winehq.org
Reporter: timofeevsv1989(a)gmail.com
Distribution: ---
Frosty Mod Manager is a WPF app, which depends on GalliumNine and
d3dcompiler_47
It load mods for frostbite games such as Dragon Age Inquisition and Mass Effect
Andromeda
When I trying to launch game with 4.7 - games just zombying in background
With wine 4.6 everything was OK
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=48522
Bug ID: 48522
Summary: ME:Andromeda scanner doesnt react on objects
Product: Wine
Version: 5.0
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: timofeevsv1989(a)gmail.com
Distribution: ---
It is strange regression.
Scanner in Mass Effect Andromeda doesnt react on every scannable objects (which
orange)
I can open scanner, but click doesnt do anything.
I've also tried bind another keys and buttons on scan -- it does do anything...
It makes game broken
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46441
Bug ID: 46441
Summary: Steam shows an extra icon when minimizing window
Product: Wine
Version: 4.0-rc5
Hardware: x86-64
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: andrey.goosev(a)gmail.com
Distribution: ---
Created attachment 63223
--> https://bugs.winehq.org/attachment.cgi?id=63223
screenshot
Steps to reproduce:
1. Enable virtual desktop
2. Launch Steam
3. Minimize window
wine-4.0-rc5-14-g0ff7fd1259
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47331
Bug ID: 47331
Summary: Steam browser flickering
Product: Wine-staging
Version: 4.9
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: werifGX(a)gmail.com
CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com
Distribution: ---
As referenced on https://github.com/PhoenicisOrg/scripts/issues/994 steam
installed using `winetricks 20190310-next` on debian buster using `wine-4.9
(Staging)` which has win7 environment, gameoverlayrenderer dll_override
disabled and CSMT enabled result in flickering of steam browser as presented on
https://youtu.be/LaR8nQ0Ir2w
Suspecting this beeing wine issue.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=56721
Bug ID: 56721
Summary: EA App: multiple assertion failure with Vulkan
renderer
Product: Wine
Version: 9.8
Hardware: x86-64
URL: https://origin-a.akamaihd.net/EA-Desktop-Client-Downlo
ad/installer-releases/EAappInstaller.exe
OS: Linux
Status: NEW
Keywords: download
Severity: minor
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: imwellcushtymelike(a)gmail.com
Distribution: Ubuntu
Created attachment 76502
--> https://bugs.winehq.org/attachment.cgi?id=76502
Wine 9.9 console output
Launching the EA App with renderer=vulkan opens a dialog three times for an
Assertion Failure. Clicking OK three times allows the app to continue, so it's
not clear which of the many sub-/backround processes is causing the issue. No
backtrace is presented.
"winetricks arial" to work around Bug 32342.
renderer=gl does not have this issue.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54948
Bug ID: 54948
Summary: EA app fails after login
Product: Wine
Version: 8.8
Hardware: x86-64
URL: https://www.ea.com/ea-app
OS: Linux
Status: NEW
Keywords: download
Severity: minor
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: andrey.goosev(a)gmail.com
Distribution: ---
d3dcompiler_47 (x64) putted in '../Program Files/Electronic Arts/EA Desktop/EA
Desktop'
After login the app main window shows for a second and then immediately closes.
Disabling d3d12 helps.
0a88:fixme:dxgi:d3d12_swapchain_init Ignoring swap effect 0x4.
0a88:fixme:dxgi:d3d12_swapchain_init Ignoring swapchain flags 0x2.
Assertion failed: !status, file ../wine/dlls/winevulkan/loader_thunks.c, line
160
0324:err:seh:call_stack_handlers invalid frame 000000001C07EA48
(000000001C082000-000000001C180000)
0324:err:seh:call_stack_handlers invalid frame 000000001C07C820
(000000001C082000-000000001C180000)
0324:err:seh:NtRaiseException Exception frame is not in stack limits => unable
to dispatch exception.
8.8-34-gd54e7cd51db
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=50155
Bug ID: 50155
Summary: Ableton Live: multicore audio processing causes high
CPU usage across multiple audio backends
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: sirwinstoncat5(a)gmail.com
Distribution: Ubuntu
When running Ableton Live, if multicore audio processing is enabled, CPU usage
will drastically increase, causing unpredictable audio crackles and overall
unstable performance.
The easiest way to test this is using Ableton Live 9; Live 10 also has the same
issue, but multicore audio processing is permanently turned on.
- Open an empty Live Set. (By default, this has 4 empty tracks, a reverb
effect, and a delay effect: a negligible amount of audio processing.)
- In Ableton's preferences, under the CPU tab, disable multicore audio
processing. Observe the built-in CPU meter in the upper-right corner; it should
sit very low (0-1% on my system).
- Enable multicore audio processing. Even with an empty Set, observe that the
CPU meter jumps to at least 10-20%. On Windows, idle CPU usage should remain
identical between single and multicore modes.
- Attempt playback of a nontrivial Set; for example, a few tracks of recorded
audio. A Set that plays back fine in single-core mode will exhibit
unpredictable audio crackling and rapid spikes in CPU usage when using
multicore mode.
I have tested this across multiple versions of Ableton (various versions of 9
and 10 both exhibit this issue), multiple audio interfaces from various
manufacturers (Behringer X32, NI Audio Kontrol 1, onboard chipset audio,
PreSonus FireStudio), and even multiple audio backends (winepulse,
wineasio->JACK). The issue seems to be most pronounced when using pulseaudio,
but it is present across all audio backends.
Most importantly, this issue can be duplicated using wineasio and a JACK server
with the dummy backend (aka not connected to any audio interface).
I am unsure where to start collecting logs for this. One guess: perhaps there
is some sort of delay or sleep occuring while a mutex is being held?
This is possibly related to #47458; however, that specifically refers to a test
case for PulseAudio, whereas this bug occurs across backends.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=55076
Bug ID: 55076
Summary: Steam fills terminal output with "ResizeObserver loop
limit exceeded" messages.
Product: Wine
Version: 8.9
Hardware: x86-64
OS: Linux
Status: NEW
Severity: minor
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: o.dierick(a)piezo-forte.be
Distribution: ---
Created attachment 74626
--> https://bugs.winehq.org/attachment.cgi?id=74626
Steam default terminal output wine 8.9
Hello,
This started after a Steam update sometimes ago I don't remember.
> [0617/144308.788:INFO:CONSOLE(1)] "ResizeObserver loop limit exceeded", source: https://steamloopback.host/index.html?IN_CLIENT=true&LOCAL_HOSTNAME=piezo1&… (1)
Searching the quoted string on the web shows that it's related to Chrome [1],
thus Chrome Embedded Framework too (libCEF).
The constant flow of messages fills the HD with several MB after a few hours.
It may be an application bug, but I can't compare to Windows because there is
no output at all when running steam from the Windows command prompt.
Regards.
[1]
https://stackoverflow.com/questions/49384120/resizeobserver-loop-limit-exce…
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39022
Bug ID: 39022
Summary: Mouse cursor shows the wrong symbol
Product: Wine
Version: 1.7.44
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: sworddragon2(a)aol.com
Distribution: ---
Starting Steam and going to the menu bar -> Steam and moving the mouse cursor
over the entry "Check for Steam Client Updates..." and then stopping the mouse
results that the mouse cursor is showing the I symbol (the cursor symbol that
for example also appears if moving the mouse cursor over a text area). Moving
the mouse shows the normal mouse cursor again but stopping the mouse on the
entry again shows the I symbol again. A workaround seems to be to close the
menu and reopening it.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=56716
Bug ID: 56716
Summary: CNC3 demo exits silently with renderer=vulkan
Product: Wine
Version: unspecified
Hardware: x86-64
URL: https://cncnz.com/games/tiberium-wars/demo-information
-download/
OS: Linux
Status: NEW
Keywords: download
Severity: minor
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: imwellcushtymelike(a)gmail.com
Distribution: Ubuntu
Created attachment 76499
--> https://bugs.winehq.org/attachment.cgi?id=76499
Wine 9.9 console log
Running the Command & Conquer 3 Demo with the renderer set to Vulkan causes the
game to exit silently.
It loads correctly with the GL renderer.
No workarounds used.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=56552
Bug ID: 56552
Summary: CnC3 demo installer fails
Product: Wine-staging
Version: 9.6
Hardware: x86-64
URL: https://cncnz.com/games/tiberium-wars/demo-information
-download/
OS: Linux
Status: NEW
Keywords: download, Installer
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: imwellcushtymelike(a)gmail.com
CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com
Distribution: Ubuntu
Created attachment 76311
--> https://bugs.winehq.org/attachment.cgi?id=76311
Wine Staging 9.6 console log
The installation for the Command & Conquer 3 demo fails under Wine Staging 9.6,
but completes successfully under vanilla Wine 9.6.
015c:err:msi:msi_install_assembly failed to install assembly
L"C:\\users\\test\\Temp\\msi2.tmp\\8.0.50727.363.policy" (0x80070005)
015c:err:msi:ACTION_InstallFinalize Failed to install assembly
015c:err:msi:ITERATE_Actions Execution halted, action L"InstallFinalize"
returned 1603
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=56550
Bug ID: 56550
Summary: Bad graphics in CNC3:KW
Product: Wine
Version: 9.6
Hardware: x86-64
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: imwellcushtymelike(a)gmail.com
Distribution: Ubuntu
Created attachment 76306
--> https://bugs.winehq.org/attachment.cgi?id=76306
Main screen
The graphics in Kane's Wrath (at least on my setup) are pretty terrible. See
attached screenshot.
I tried:
d3dx9_29: GL_OUT_OF_MEMORY error
d3dcompiler_47: Doesn't help, but now the EA logo flickers.
d3dxof: As above.
d3dxof & d3dcompiler_47: No flicker, but no improvement.
All three: GL_OUT_OF_MEMORY
orm=backbuffer: No change
csmt=off: No change, logo flickering
Changing shader_backend made no difference.
renderer=vulkan Bug 54436
At this point I threw the whole of d3dx9 at it but I keep getting
GL_OUT_OF_MEMORY.
There should be no memory issues (it works in Windows 10, but better in Windows
7).
FUN FACT: Running with WINEDEBUG=fixme-d3d changes the pink bits to black bits.
Workaround unknown.
04:00.0 VGA compatible controller: NVIDIA Corporation GK104GL [Quadro K5000]
(rev a1)
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=56663
Bug ID: 56663
Summary: CNC3 exits silently when alt-tabbing
Product: Wine
Version: 9.8
Hardware: x86-64
URL: https://files.cncnz.com/cc3_tiberium_wars/demo/CnC3Dem
o.exe
OS: Linux
Status: NEW
Keywords: download
Severity: minor
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: imwellcushtymelike(a)gmail.com
Distribution: ---
Created attachment 76441
--> https://bugs.winehq.org/attachment.cgi?id=76441
Wine 9.8 console log
The Command & Conquer 3 Demo (and Kane's Wrath full game) exits silently if
alt-tabbing out of the game, then back in.
Using a virtual desktop (of any size) stops this occurring. The game itself
"escapes" the virtual desktop and runs in full screen, but this turns out to be
a good thing.
My process:
1. Install demo (used WINEARCH=win32 but that's not necessary).
2. Set resolution to 1920x1200.
3. Start a skirmish.
4. Alt-tab out.
5. Alt-tab back in.
011c:fixme:faultrep:ReportFault 0031E800 0x0 stub
Same with 720p and 1080p. I haven't tried other resolutions as my setup cannot
seem to handle them.
$ wine "c:\program files\electronic arts\command & conquer 3 tiberium wars
demo\cnc3demo.exe"
$ sha1sum CnC3Demo.exe
f6af21eba2d17eb6d8bb6a131b501b41c3a7eaf7 CnC3Demo.exe
https://files.cncnz.com/cc3_tiberium_wars/demo/CnC3Demo.exehttps://web.archive.org/https://files.cncnz.com/cc3_tiberium_wars/demo/CnC3…
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24785
Summary: Explorer++: tile view doesn't work
Product: Wine
Version: 1.3.5
Platform: x86-64
URL: http://www.explorerplusplus.com/download
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: RandomAccountName(a)mail.com
Created an attachment (id=31335)
--> (http://bugs.winehq.org/attachment.cgi?id=31335)
Complete terminal output
To reproduce, click view -> tiles. Nothing happens, it just looks the same as
the default icon view. This looks pretty suspicious:
fixme:listview:LISTVIEW_SetView View LV_VIEW_TILE unimplemented
I can't test with the native comctl32, though (it crashes the program on
startup).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19371
Summary: BCArchive: encoutners unknown toolbar style
Product: Wine
Version: 1.1.26
Platform: PC
URL: http://www.jetico.com/encryption-bcarchive/
OS/Version: Linux
Status: NEW
Keywords: download
Severity: enhancement
Priority: P2
Component: comctl32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
CC: bunglehead(a)gmail.com
fixme:toolbar:TOOLBAR_SetExtendedStyle Unknown Toolbar Extended Style
0x00000020. Please report.
Native comctl32 'fixes' it. There's not major visual flaw afaict, but the fixme
does say to report it ;-).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=52466
Bug ID: 52466
Summary: Toolbar: Wrong size returned by TB_GETMAXSIZE message
for toolbars with TBSTYLE_WRAPABLE style
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: comctl32
Assignee: wine-bugs(a)winehq.org
Reporter: yal(a)csoftcom.com
Distribution: ---
Under Windows (I've tested Win10/11) TB_GETMAXSIZE always returns size for
single row of buttons regardless of wrapped it or not. WINE calculates size for
current wrapping. For example: under Win toolbar with initial size (0,0) and 2
buttons (20,20) TB_GETMAXSIZE always returns(40,20), WINE returns (20,40) - 2
rows wrapping.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=52465
Bug ID: 52465
Summary: Toolbar: Wrong TB_GETBUTTON message processing,
returns (-1) instead of separator width in TBBUTTON
structure
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: comctl32
Assignee: wine-bugs(a)winehq.org
Reporter: yal(a)csoftcom.com
Distribution: ---
>From MSDN documents about TB_GETBUTTON : If the button is a separator, that is,
if fsStyle is set to BTNS_SEP, iBitmap determines the width of the separator,
in pixels.
So, this code needs to change:
/wine/dlls/comctl32/toolbar.c:3373
static LRESULT
TOOLBAR_GetButton (const TOOLBAR_INFO *infoPtr, INT nIndex, TBBUTTON *lpTbb)
{
---------------------------<cut>------------------------
/*From MSDN documents: If the button is a separator, that is, if fsStyle is
set to BTNS_SEP,
iBitmap determines the width of the separator, in pixels*/
lpTbb->iBitmap = (btnPtr->fsStyle & BTNS_SEP) ? SEPARATOR_WIDTH :
btnPtr->iBitmap;
---------------------------<cut>------------------------
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.