December 2024 - wine-gitlab

[PATCH v67 0/6] MR2786: Add support for AF_UNIX sockets
by Ally Sommers (＠dropbear) 25 Mar '25

25 Mar '25

Windows 10 [received support](https://devblogs.microsoft.com/commandline/af_unix-comes-to-window… for AF_UNIX sockets in Insider Build 17063. This merge request adds basic support for AF_UNIX sockets to ws2_32 and wineserver. Of particular note is the difficulty in handling `sun_path`. Most of the functions that allow for translating Windows paths to Unix paths are not accessible from ws2_32. I considered the following options: * Pass the Windows path to wineserver and do the conversion there. * This is, as far as I can tell, not possible without major rearchitecting. wineserver does not have functions to translate Windows paths to Unix paths, for obvious reasons. * Obtain the current working directory of the requesting process and temporarily change directories to there. * This only handles relative paths and fails for absolute paths, UNC paths, etc. * Conditionally change directories based on whether the path is relative or not. * This is error-prone and wineserver does not have the requisite functions to do this cleanly. I ultimately decided to pass the translated Unix path to wineserver, which changes directories to `dirname(path)`. It then provides `bind` and `connect` with `basename(path)`. This is not threadsafe, but wineserver is not (currently) multithreaded. Abstract sockets are not fully supported by this patch, matching the behavior of Windows. -- v67: ws2_32/tests: Add test for AF_UNIX sockets. server: Fix getsockname() and accept() on AF_UNIX sockets. server: Introduce error when attempting to create a SOCK_DGRAM AF_UNIX socket. server: Allow for deletion of socket files. ws2_32: Add support for AF_UNIX sockets. ws2_32: Add afunix.h header. https://gitlab.winehq.org/wine/wine/-/merge_requests/2786

8 22

[PATCH v5 0/13] MR6944: Draft: winex11: Workaround various window manager bugs.
by Rémi Bernon (＠rbernon) 24 Mar '25

24 Mar '25

This workarounds KWin and Mutter window manager bugs/fanciness. The KWin bug is with maximized windows getting broken after sending a configure request, and which fix has been merged upstream already. The Mutter issue is unlikely to be fixed upstream, at least not its specific behavior, and we would instead better handle it as well as we can. -- v5: winex11: Workaround KWin bug with maximized windows. winex11: Set _NET_WM_USER_TIME to 0 to implement SWP_NOACTIVATE. winex11: Keep track of the SWP flags to be used when mapping windows. winex11: Keep _NET_WM_USER_TIME on the individual windows. winex11: Workaround Mutter bug when changing decorations. winex11: Update _MOTIF_WM_HINTS after _NET_WM_STATE and config. winex11: Avoid creating windows with override-redirect flag set. winex11: Track _MOTIF_WM_HINTS property in the state tracker. winex11: Introduce a new handle_state_change helper. winex11: Ignore transient state changes in other processes. winex11: Give focus to the expected window when unampping with focus. winex11: Use the current state when deciding how to reply to WM_TAKE_FOCUS. winex11: Use the state tracker for the desktop window _NET_WM_STATE. https://gitlab.winehq.org/wine/wine/-/merge_requests/6944

3 17

[PATCH v7 0/2] MR979: d3d9: Implement d3dx_effect_SetRawValue
by Patrick Hibbs (＠hibbsncc1701) 24 Mar '25

24 Mar '25

Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=46012 Signed-off-by: Patrick Hibbs <hibbsncc1701(a)gmail.com> -- v7: d3dx9/tests: Implement tests for d3dx_effect_SetRawValue(). d3dx9: Implement d3dx_effect_SetRawValue https://gitlab.winehq.org/wine/wine/-/merge_requests/979

5 13

[PATCH v7 0/1] MR5145: opengl32: speed up wow64 mapping
by Etaash Mathamsetty (＠etaash.mathamsetty) 19 Mar '25

19 Mar '25

My hardware is Ryzen 7 4700u with the integrated graphics Flatout (Direct3D 9): 20 fps (renders correctly) Unigine Heaven (OpenGL): ~40-60 fps (renders correctly) Unigine Heaven (Direct3D 9): 20-30 fps (renders correctly) Unigine Heaven (Direct3D 11): 20-30 fps as well (renders correctly) Elder Scrolls IV (Direct3D 9): 20 fps (renders correctly) BeamNG Tech Demo 0.3 (Direct3D 9): 2 fps (renders correctly, but still runs poorly) Massive step up from getting 2 fps across many wined3d games, but it's still pretty bad, ~~and sometimes runs worse than the original code~~. Now with a combination of using the new and old code dynamically you can get the best of both worlds! Unfortunately, we lose the ability to get lucky with the mapping just happening to be in the 32 bit range. -- v7: opengl32: speed up wow64 mapping. https://gitlab.winehq.org/wine/wine/-/merge_requests/5145

5 6

[PATCH 0/1] MR3862: user32/tests: Ignore other messages in test_broadcast.
by Esme Povirk (＠madewokherd) 18 Mar '25

18 Mar '25

Wine-Bug: https://bugs.winehq.org/show_bug.cgi?id=54194 If the SendMessageTimeout call takes a long time, we can get other messages which also set the observed wparam value. Apparently, this is especially likely on Windows 7. This also removes the (wParam == 0xbaadbeef) check which may have been intended to serve the same goal but doesn't work because the observed wParam value is still assigned. -- https://gitlab.winehq.org/wine/wine/-/merge_requests/3862

3 2

[PATCH v3 0/6] MR6866: Draft: ntdll: On macOS x86_64, swap GSBASE between the TEB and macOS TSD when entering/leaving PE code.
by Brendan Shanks (＠bshanks) 17 Mar '25

17 Mar '25

x86_64 Windows and macOS both use `%gs` to access thread-specific data (Windows TEB, macOS TSD). To date, Wine has worked around this conflict by filling the most important TEB fields (`0x30`/`Self`, `0x58`/`ThreadLocalStorage`) in the macOS TSD structure (Apple reserved the fields for our use). This was sufficient for most Windows apps. CrossOver's Wine had an additional hack to handle `0x60`/`ProcessEnvironmentBlock`, and binary patches for certain CEF binaries which directly accessed `0x8`/`StackBase`. Additionally, Apple's libd3dshared could activate a special mode in Rosetta 2 where code executing in certain regions would use the Windows TEB when accessing `%gs`. Now that the PE separation is complete, GSBASE can be swapped when entering/exiting PE code. This is done in the syscall dispatcher, unix-call dispatcher, and for user-mode callbacks. GSBASE also needs to be set to the macOS TSD when entering signal handlers (in `init_handler()`), and then restored to the Windows TEB when exiting (in `leave_handler()`). There is a special-case needed in `usr1_handler`: when inside a syscall (on the kernel stack), GSBASE may need to be reset to either the TEB or the TSD. The only way to tell is to determine what GSBASE was set to on entry to the signal handler. --- macOS does not have a public API for setting GSBASE, but the private `_thread_set_tsd_base()` works and was added in macOS 10.12. `_thread_set_tsd_base()` is a small thunk that sets `%esi`, `%eax`, and does the `syscall`: https://github.com/apple-oss-distributions/xnu/blob/8d741a5de7ff4191bf97d57…. The syscall instruction itself clobbers `%rcx` and `%r11`. I've tried to save as few registers as possible when calling `_thread_set_tsd_base()`, but there may be room for improvement there. --- I've tested this successfully on macOS 15 (Apple Silicon and Intel) with several apps and games, including the `cefclient.exe` CEF sample. I still need to test this patch on macOS 10.13, and I'd also like to do some performance testing. --- I also tested an alternate implementation strategy for this which took advantage of the expanded "full" thread state which is passed to signal handlers when a process has set a user LDT. The full thread state includes GSBASE, so GSBASE is set back to whatever is in the sigcontext on return (like every other field in the context). This would avoid needing to explicitly reset GSBASE in `leave_handler()`, and avoid the special-case in `usr1_handler()`. This strategy was simpler, but I'm not using it for 2 reasons: - the "full" thread state is only available starting with macOS 10.15, and we still support 10.13. - more crucially, Rosetta 2 doesn't seem to correctly implement the GS.base field of the full thread state. It's set to 0 on entry, and isn't read on exit. -- v3: ntdll: Remove x86_64 Mac-specific TEB access workarounds that are no longer needed. ntdll: On macOS x86_64, swap GSBASE between the TEB and macOS TSD when entering/leaving PE code. ntdll: Ensure init_handler runs in signal handlers before any compiler-generated memset calls. ntdll: Remove ugly fallback method for getting a thread's GSBASE on macOS. ntdll: Leave kernel stack before accessing %gs in x86_64 syscall dispatcher. ntdll: Do %gs accesses before switching to kernel stack in x86_64 syscall dispatcher. https://gitlab.winehq.org/wine/wine/-/merge_requests/6866

5 11

[PATCH 0/1] MR3857: d3d11/tests: Properly mark the indexed sample position test as succeeding with the Vulkan backend.
by Henri Verbeet (＠hverbeet) 16 Mar '25

16 Mar '25

-- https://gitlab.winehq.org/wine/wine/-/merge_requests/3857

4 4

[PATCH v3 0/2] MR3833: iphlpapi/tests: Quadruple the buffer size in a GetAdaptersAddresses() test.
by Hans Leidekker (＠hans) 16 Mar '25

16 Mar '25

As shown by the testbot, doubling is not always sufficient. -- v3: iphlpapi/tests: Call GetExtendedTcp/UdpTable() in a loop. https://gitlab.winehq.org/wine/wine/-/merge_requests/3833

3 4

[PATCH v2 0/2] MR3833: iphlpapi/tests: Quadruple the buffer size in a GetAdaptersAddresses() test.
by Hans Leidekker (＠hans) 16 Mar '25

16 Mar '25

As shown by the testbot, doubling is not always sufficient. -- v2: iphlpapi/tests: Call GetExtendedTcp/UdpTable() in a loop. iphlpapi/tests: Call GetAdaptersAddresses() in a loop. https://gitlab.winehq.org/wine/wine/-/merge_requests/3833

4 6

[PATCH 0/1] MR3838: kernel32/tests: Allow a 0 removed entry count in the completion test.
by Francois Gouget (＠fgouget) 16 Mar '25

16 Mar '25

This matches the ntdll:file fix. Wine-Bug: https://bugs.winehq.org//show_bug.cgi?id=54554 -- https://gitlab.winehq.org/wine/wine/-/merge_requests/3838

3 2

2025

2024

2023

2022

wine-gitlab December 2024