From: Giovanni Mascellani gmascellani@codeweavers.com
--- libs/vkd3d-shader/ir.c | 161 +++++++++++++++++++++++++++++++++++++++-- 1 file changed, 155 insertions(+), 6 deletions(-)
diff --git a/libs/vkd3d-shader/ir.c b/libs/vkd3d-shader/ir.c index 05b40cafd..51cbceab3 100644 --- a/libs/vkd3d-shader/ir.c +++ b/libs/vkd3d-shader/ir.c @@ -3065,7 +3065,7 @@ static void vsir_block_list_remove_index(struct vsir_block_list *list, size_t id
struct vsir_block { - unsigned int label; + unsigned int label, order_pos; /* `begin' points to the instruction immediately following the * LABEL that introduces the block. `end' points to the terminator * instruction (either BRANCH or RET). They can coincide, meaning @@ -3148,6 +3148,27 @@ struct vsir_cfg * `continue' instruction would jump and `end' is where a * `break' instruction would jump. */ unsigned int begin, end; + /* Each loop interval can be natural or synthetic. Natural + * intervals are added to represent loops given by CFG back + * edges. Synthetic intervals do not correspond to loop into + * the input CFG, but are added to leverage their `break' + * instruction in order to execute forward edges. + * + * For a synthetic loop interval it's not really important + * which one is the `begin' block, since we don't need to + * execute `continue' for them. So we have some leeway for + * moving it provided that these conditions are met: 1. the + * interval must contain all `break' instructions that target + * it, which in practice means that `begin' can be moved + * forward and not backward; 2. intervals must retain the + * correct inclusion properties (for each pair of intervals, + * either one contains the other or they are disjoint). + * + * Subject to these conditions, we try to reuse the same loop + * as much as possible (if many forward edges target the same + * block), but we still try to keep `begin' as forward as + * possible, to keep the loop scope as small as possible. */ + bool synthetic; } *loop_intervals; size_t loop_interval_count, loop_interval_capacity; }; @@ -3174,7 +3195,7 @@ static void vsir_cfg_cleanup(struct vsir_cfg *cfg) }
static enum vkd3d_result vsir_cfg_add_loop_interval(struct vsir_cfg *cfg, unsigned int begin, - unsigned int end) + unsigned int end, bool synthetic) { struct cfg_loop_interval *interval;
@@ -3186,6 +3207,7 @@ static enum vkd3d_result vsir_cfg_add_loop_interval(struct vsir_cfg *cfg, unsign
interval->begin = begin; interval->end = end; + interval->synthetic = synthetic;
return VKD3D_OK; } @@ -3658,6 +3680,7 @@ static enum vkd3d_result vsir_cfg_sort_nodes(struct vsir_cfg *cfg) }
vsir_block_list_remove_index(&sorter.available_blocks, i); + block->order_pos = cfg->order.count; if ((ret = vsir_block_list_add_checked(&cfg->order, block)) < 0) goto fail;
@@ -3677,7 +3700,7 @@ static enum vkd3d_result vsir_cfg_sort_nodes(struct vsir_cfg *cfg) break;
if ((ret = vsir_cfg_add_loop_interval(cfg, inner_stack_item->open_time, - cfg->order.count)) < 0) + cfg->order.count, false)) < 0) goto fail;
new_seen_count = inner_stack_item->loop->count; @@ -3728,9 +3751,6 @@ static enum vkd3d_result vsir_cfg_sort_nodes(struct vsir_cfg *cfg)
TRACE("%s\n", cfg->debug_buffer.buffer); vkd3d_string_buffer_clear(&cfg->debug_buffer); - - for (i = 0; i < cfg->loop_interval_count; ++i) - TRACE("Loop interval %u - %u\n", cfg->loop_intervals[i].begin, cfg->loop_intervals[i].end); }
return VKD3D_OK; @@ -3743,6 +3763,129 @@ fail: return ret; }
+static enum vkd3d_result vsir_cfg_generate_synthetic_loop_intervals(struct vsir_cfg *cfg) +{ + enum vkd3d_result ret; + size_t i, j, k; + + for (i = 0; i < cfg->block_count; ++i) + { + struct vsir_block *block = &cfg->blocks[i]; + + if (block->label == 0) + continue; + + for (j = 0; j < block->successors.count; ++j) + { + struct vsir_block *successor = block->successors.blocks[j]; + struct cfg_loop_interval *extend = NULL; + unsigned int begin; + enum + { + ACTION_DO_NOTHING, + ACTION_CREATE_NEW, + ACTION_EXTEND, + } action = ACTION_CREATE_NEW; + + /* We've already contructed loop intervals for the back + * edges, there's nothing more to do. */ + if (vsir_block_dominates(successor, block)) + continue; + + assert(block->order_pos < successor->order_pos); + + /* Jumping from a block to the following one is always + * possible, so nothing to do. */ + if (block->order_pos + 1 == successor->order_pos) + continue; + + /* Let's look for a loop interval that already breaks at + * `successor' and either contains or can be extended to + * contain `block'. */ + for (k = 0; k < cfg->loop_interval_count; ++k) + { + struct cfg_loop_interval *interval = &cfg->loop_intervals[k]; + + if (interval->end != successor->order_pos) + continue; + + if (interval->begin <= block->order_pos) + { + action = ACTION_DO_NOTHING; + break; + } + + if (interval->synthetic) + { + action = ACTION_EXTEND; + extend = interval; + break; + } + } + + if (action == ACTION_DO_NOTHING) + continue; + + /* Ok, we have to decide where the new or replacing + * interval has to begin. These are the rules: 1. it must + * begin before `block'; 2. intervals must be correctly + * stacked (for any two intervals, either one is included + * in the other or they are disjoint); 3. the new interval + * should begin as late as possible, to limit control flow + * depth and extension. */ + begin = block->order_pos; + + /* Our candidate interval is always [begin, + * successor->order_pos), and we move `begin' backward + * until the candidate interval contains all the intervals + * whose endpoint lies in the candidate interval + * itself. */ + for (k = 0; k < cfg->loop_interval_count; ++k) + { + struct cfg_loop_interval *interval = &cfg->loop_intervals[k]; + + if (begin < interval->end && interval->end < successor->order_pos) + begin = min(begin, interval->begin); + } + + /* New we have to care about the intervals whose begin + * point lies in the candidate interval. We cannot move + * the condidate interval endpoint, because it is + * important that the loop break target matches + * `successor'. So we have to move that interval's begin + * point to the begin point of the candidate interval, + * i.e. `begin'. But what if the interval we should extend + * backward is not synthetic? This cannot happen, + * fortunately, because it would mean that there is a jump + * entering a loop via a block which is not the loop + * header, so the CFG would not be reducible. */ + for (k = 0; k < cfg->loop_interval_count; ++k) + { + struct cfg_loop_interval *interval = &cfg->loop_intervals[k]; + + if (interval->begin < successor->order_pos && successor->order_pos < interval->end) + { + if (interval->synthetic) + interval->begin = min(begin, interval->begin); + assert(begin >= interval->begin); + } + } + + if (action == ACTION_EXTEND) + extend->begin = begin; + else if ((ret = vsir_cfg_add_loop_interval(cfg, begin, successor->order_pos, true)) < 0) + return ret; + } + } + + if (TRACE_ON()) + for (i = 0; i < cfg->loop_interval_count; ++i) + TRACE("%s loop interval %u - %u\n", cfg->loop_intervals[i].synthetic ? "Synthetic" : "Natural", + cfg->loop_intervals[i].begin, cfg->loop_intervals[i].end); + + return VKD3D_OK; +} + enum vkd3d_result vkd3d_shader_normalise(struct vkd3d_shader_parser *parser, const struct vkd3d_shader_compile_info *compile_info) { @@ -3781,6 +3924,12 @@ enum vkd3d_result vkd3d_shader_normalise(struct vkd3d_shader_parser *parser, return result; }
+ if ((result = vsir_cfg_generate_synthetic_loop_intervals(&cfg)) < 0) + { + vsir_cfg_cleanup(&cfg); + return result; + } + if ((result = simple_structurizer_run(parser)) < 0) { vsir_cfg_cleanup(&cfg);