Re: [PATCH 0/1] MR2657: d3d9/tests: test table fog z vs rhw with shaders, depth bias, oDepth..

[Stefan Dösinger (＠stefan)]

Stefan Dösinger (@stefan) commented about dlls/d3d9/tests/visual.c:
> -
>    {0, 2, 2, 0.2f, 0.2f, 0.0f, D3DFVF_XYZ,    0x00b24c00, 0x00aa5500}, /* color1 != color2 */
> -
>    {0, 2, 2, 1.2f, 1.2f, 0.0f, D3DFVF_XYZRHW, 0x0008f600, 0x00aa5500}, /* color1 != color2 */
> -
>    {0, 2, 2, 1.2f, 1.2f, 0.0f, D3DFVF_XYZ,    0x000000ff, 0x000000ff},
> -
>    /* cases 60-69 */
> -
>    {1, 2, 0, 0.2f, 0.2f, 0.0f, D3DFVF_XYZRHW, 0x0000ff00, 0x0000ff00},
> -
>    {1, 2, 0, 0.2f, 0.2f, 0.0f, D3DFVF_XYZ,    0x0055aa00, 0x0055aa00},
> -
>    {1, 2, 0, 1.2f, 1.2f, 0.0f, D3DFVF_XYZRHW, 0x00986700, 0x00986700},
> -
>    {1, 2, 0, 1.2f, 1.2f, 0.0f, D3DFVF_XYZ,    0x000000ff, 0x000000ff},
> -
>    {1, 2, 1, 0.2f, 0.2f, 0.0f, D3DFVF_XYZRHW, 0x0000ff00, 0x0000ff00},
> -
>    {1, 2, 1, 0.2f, 0.2f, 0.0f, D3DFVF_XYZ,    0x0055aa00, 0x0055aa00},
> -
>    {1, 2, 1, 1.2f, 1.2f, 0.0f, D3DFVF_XYZRHW, 0x00986700, 0x00986700},
> -
>    {1, 2, 1, 1.2f, 1.2f, 0.0f, D3DFVF_XYZ,    0x000000ff, 0x000000ff},
> -
>    {1, 2, 2, 0.2f, 0.2f, 0.0f, D3DFVF_XYZRHW, 0x00b24c00, 0x00aa5500}, /* color1 != color2 */
> -
>    {1, 2, 2, 0.2f, 0.2f, 0.0f, D3DFVF_XYZ,    0x00b24c00, 0x00aa5500}, /* color1 != color2 */
> -
>    /* cases 70-71 */
> -
>    {1, 2, 2, 1.2f, 1.2f, 0.0f, D3DFVF_XYZRHW, 0x0008f600, 0x00aa5500}, /* color1 != color2 */

Based on your comment in the cover letter I was expecting all oDepth writing draws to have different results. What is special about these tests that one of your Intel GPUs differs?