November 2012 - Wine-Bugs - list.winehq.org

[Bug 13273] New: Wine does not remember disk labels set through winecfg
by wine-bugs＠winehq.org Dec. 20, 2025

Dec. 20, 2025

http://bugs.winehq.org/show_bug.cgi?id=13273 Summary: Wine does not remember disk labels set through winecfg Product: Wine Version: 1.0-rc1 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: ccf2egd02(a)sneakemail.com Wine does not seem to remember disk labels or serial numbers when set via winecfg. Steps to reproduce: 1) create a disk entry in ~/.wine/dosdevices ln -s /someplace_with_CD_image ~/.wine/dosdevices/q\: 2) run winecfg, select disk tab. 3) Select q: 4) Show advanced 5) Set to manual setup, disk label to "SOMETHING", disk ID to "FEEDBE" 6) APPLY 7) verify data by selecting some other drive, then re-selecting q: 8) quit winecfg 9) Restart winecfg and reselect the disk tab. Reselect q: Expected results Disk label should be "SOMETHING", id should be "FEEDBE" Actual results Disk label unset, disk ID 0 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

3 25

[Bug 12401] New: Support junction points, i.e. DeviceIoCtl( FSCTL_SET_REPARSE_POINT/FSCTL_GET_REPARSE_POINT)
by wine-bugs＠winehq.org Dec. 12, 2025

Dec. 12, 2025

http://bugs.winehq.org/show_bug.cgi?id=12401 Summary: Support junction points, i.e. DeviceIoCtl(FSCTL_SET_REPARSE_POINT/FSCTL_GET_REPARSE_PO INT) Product: Wine Version: CVS/GIT Platform: Other OS/Version: other Status: NEW Severity: normal Priority: P2 Component: ntdll AssignedTo: wine-bugs(a)winehq.org ReportedBy: dank(a)kegel.com Junction points are one of Microsoft's answers to symlinks. Unix symlinks could be mapped into junction points. This would allow applications (e.g. Picasa) avoid following symlinks if they wanted to. Also, the .net 2 installer would be happier in winxp mode if wine supported junction points (see bug 10601): "The .NET 2.0 Framework installer checks if the target volume is NTFS filesystem type and then uses the FSCTL_SET_REPARSE_POINT ioctl (used for mount points and junctions) to create junction points for each registered assembly in Windows SxS directory to GAC assembly directory (link target). Basically the junction point is used to redirect access from one directory to another." Tommy Kho posted a patch to add a conformance test for getting and setting junction points, http://www.winehq.org/pipermail/wine-patches/2006-March/024956.html but it was not accepted. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

3 91

[Bug 25535] New: .NET Framework 4.0 Fails to install with HRESULT 0x80070643
by wine-bugs＠winehq.org Dec. 7, 2025

Dec. 7, 2025

http://bugs.winehq.org/show_bug.cgi?id=25535 Summary: .NET Framework 4.0 Fails to install with HRESULT 0x80070643 Product: Wine Version: 1.3.9 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: pjdowson(a)gmail.com Wine version is 1.3.9, compiled with no parameters on Fedora 13. Installing dotNetFx40_Full_x86_x64.exe downloaded from the MS website, the installer will open and verify the integrity of files. The next stage will attempt to install the .NET Framework 4.0 Client Profile. Towards the end of this install the installer will fail with HRESULT 0x80070643, leaving little or no information in the %TEMP% folder as to the cause. The installer will only run if wine is set to WinXP. Process used to reproduce: WINEPREFIX=~/.wine-net40 sh winetricks gecko WINEPREFIX=~/.wine-net40 sh winetricks windowscodecs ie7 msxml3 WINEPREFIX=~/.wine-net40 wineboot WINEDEBUG=+relay WINEPREFIX=~/.wine-net40 wine Downloads/net40/dotNetFx40_Full_x86_x64.exe &> net-out I also attempted to install the .NET Framework 4.0 Client Profile prior to installing the Full package. This provides the same error, the only difference to the above process used was the filename of the Client Profile installer dotNetFx40_Client_x86_x64.exe. Each time I attempted to install I used a clean WINEPREFIX, deleting the prior one before attempting again. Screenshot of error: http://www.stimpy.org/wine/net-error.png Logs referenced in above screenshot, in %TEMP% dir: http://www.stimpy.org/wine/net-install-logs.tar.gz Output of installer debug: http://www.stimpy.org/wine/net-out.tar.gz This is my first bug report, I apologize if I have missed anything out. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 48

[Bug 23319] New: cmd thinks shift.exe is an internal command
by wine-bugs＠winehq.org Dec. 7, 2025

Dec. 7, 2025

http://bugs.winehq.org/show_bug.cgi?id=23319 Summary: cmd thinks shift.exe is an internal command Product: Wine Version: 1.2-rc4 Platform: x86 OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: programs AssignedTo: wine-bugs(a)winehq.org ReportedBy: dank(a)kegel.com On Windows, 'shift' is an internal command, and 'shift.exe' is an external command. Wine's cmd mistakenly thinks 'shift.exe' is a synonym for 'shift'. This makes it somewhat hard to play EA's Need For Speed: Shift. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 14

[Bug 23015] New: PL\SQL Developer: shows standard message boxes behind main window
by wine-bugs＠winehq.org Dec. 2, 2025

Dec. 2, 2025

http://bugs.winehq.org/show_bug.cgi?id=23015 Summary: PL\SQL Developer: shows standard message boxes behind main window Product: Wine Version: 1.2-rc2 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: major Priority: P2 Component: comdlg32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: chaostya(a)gmail.com When I write a query in PL\SQL Developer window, then issue it against DB and then want to close the window I click [x] and it looks like nothing happens, but if I move main window down I would see a standard "question" message dialog box asking me if I want to save my changes. I'm on 1.2-rc2 and it's a regression from 1.2-rc1 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 49

[Bug 30853] New: Wine doesn’t always handle "right alt" properly
by wine-bugs＠winehq.org Dec. 1, 2025

Dec. 1, 2025

http://bugs.winehq.org/show_bug.cgi?id=30853 Bug #: 30853 Summary: Wine doesn’t always handle "right alt" properly Product: Wine Version: 1.5.5 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: winex11.drv AssignedTo: wine-bugs(a)winehq.org ReportedBy: sloonz(a)gmail.com Classification: Unclassified Created attachment 40410 --> http://bugs.winehq.org/attachment.cgi?id=40410 workaround/quick and dirty fix I’m trying to get World of Warcraft working under Wine. However, I have huge trouble with key bindings (I use unusual key bindings : I use the right half of my keyboard, whereas most players use the left half). After investigation, I found 3 bugs (different behaviors between Wine and my Windows installation). The first one is the management of the right "Alt" key (labeled "Alt-Gr" on my keyboard). When I press AltGr+l under Windows with Spy++, I get the followings events : <03637> 0007045A P WM_KEYDOWN nVirtKey:VK_CONTROL cRepeat:1 ScanCode:1D fExtended:0 fAltDown:0 fRepeat:0 fUp:0 <03638> 0007045A P WM_KEYDOWN nVirtKey:VK_MENU cRepeat:1 ScanCode:38 fExtended:1 fAltDown:1 fRepeat:0 fUp:0 <03639> 0007045A P WM_KEYDOWN nVirtKey:'L' cRepeat:1 ScanCode:18 fExtended:0 fAltDown:1 fRepeat:0 fUp:0 <03640> 0007045A P WM_DEADCHAR chCharCode:'002F' (47) cRepeat:1 ScanCode:18 fExtended:0 fAltDown:1 fRepeat:0 fUp:0 <03641> 0007045A P WM_KEYUP nVirtKey:'L' cRepeat:1 ScanCode:18 fExtended:0 fAltDown:1 fRepeat:1 fUp:1 <03642> 0007045A P WM_SYSKEYUP nVirtKey:VK_CONTROL cRepeat:1 ScanCode:1D fExtended:0 fAltDown:1 fRepeat:1 fUp:1 <03643> 0007045A P WM_KEYUP nVirtKey:VK_MENU cRepeat:1 ScanCode:38 fExtended:1 fAltDown:0 fRepeat:1 fUp:1 Under Wine 1.5.5 however (WINEDEBUG=+msg), I get those : trace:msg:peek_message got type 7 msg 100 (WM_KEYDOWN) hwnd 0x6007e wp eb lp 760001 [note: wp = VK_OEM_PA2] trace:msg:peek_message got type 7 msg 101 (WM_KEYUP) hwnd 0x6007e wp 4c lp c0260001 [note: wp = 'L'] trace:msg:peek_message got type 7 msg 101 (WM_KEYUP) hwnd 0x6007e wp eb lp c0760001 [note: wp = VK_OEM_PA2] With xev, I get : KeyPress event, serial 93, synthetic NO, window 0x4000001, root 0xbc, subw 0x0, time 5086996, (1585,410), root:(2578,425), state 0x0, keycode 108 (keysym 0xfe03, ISO_Level3_Shift), same_screen YES, XKeysymToKeycode returns keycode: 92 XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 93, synthetic NO, window 0x4000001, root 0xbc, subw 0x0, time 5087052, (1585,410), root:(2578,425), state 0x80, keycode 108 (keysym 0xfe03, ISO_Level3_Shift), same_screen YES, XKeysymToKeycode returns keycode: 92 XLookupString gives 0 bytes: XFilterEvent returns: False After "setxkbmap us", AltGr is bound to Alt_R under X (checked with xev), and I get this under Wine : trace:msg:peek_message got type 7 msg 104 (WM_SYSKEYDOWN) hwnd 0x10046 wp a5 lp 21380001 [wp = VK_RMENU] trace:msg:peek_message got type 7 msg 104 (WM_SYSKEYDOWN) hwnd 0x10046 wp 4c lp 20260001 [wp = 'L'] trace:msg:peek_message got type 6 msg 106 (WM_SYSCHAR) hwnd 0x10046 wp 6c lp 20260001 [wp = 'l'] trace:msg:peek_message got type 7 msg 105 (WM_SYSKEYUP) hwnd 0x10046 wp 4c lp e0260001 [wp = 'L'] trace:msg:peek_message got type 7 msg 101 (WM_KEYUP) hwnd 0x10046 wp a5 lp c1380001 [wp = VK_RMENU] (yes, I have a KEYUP without KEYDOWN) Wich is still not the same as Windows. So I think there is two problems here : - ISO_Level3_Shift is not properly recognized by Wine - "AltGr" doesn't have the same behavior under Wine and Windows FYI, attached patch is a workaround to have the same behavior than Windows. With it, I get this under Wine : trace:msg:peek_message got type 7 msg 100 (WM_KEYDOWN) hwnd 0x10062 wp a2 lp 1d0001 [note: wp = VK_LCONTROL] trace:msg:peek_message got type 7 msg 100 (WM_KEYDOWN) hwnd 0x10062 wp a4 lp 20380001 [note: wp = VK_LMENU] trace:msg:peek_message got type 7 msg 100 (WM_KEYDOWN) hwnd 0x10062 wp 4c lp 20260001 [note: wp = 'L'] trace:msg:peek_message got type 7 msg 101 (WM_KEYUP) hwnd 0x10062 wp 4c lp e0260001 trace:msg:peek_message got type 7 msg 105 (WM_SYSKEYUP) hwnd 0x10062 wp a2 lp e01d0001 trace:msg:peek_message got type 7 msg 101 (WM_KEYUP) hwnd 0x10062 wp a4 lp c0380001 Which is still not the same as Windows : - Windows uses (right) control + menu (with fExtended flag for menu) whereas Wine uses left control + left menu. Not investigated if this is related to TranslateMessage. - AltGr+L is a dead symbol on my keymap. Windows send a DEADCHAR message, wheras Wine send nothing. Note that I had to disable the XFilterEvent test in event.c to have those messages, otherwise nothing is sent to the program (but that’s another story for another bug report) But it suffice for my use case (WoW key bindings with right alt) -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9

[Bug 16882] New: WMI core 1.5 installation hangs (needed for .NET 3.0 installer, WCF part), SECURITY_SERVICE_RID missing from service token group
by wine-bugs＠winehq.org Nov. 27, 2025

Nov. 27, 2025

http://bugs.winehq.org/show_bug.cgi?id=16882 Summary: WMI core 1.5 installation hangs (needed for .NET 3.0 installer, WCF part), SECURITY_SERVICE_RID missing from service token group Product: Wine Version: 1.1.12 Platform: Other URL: http://www.microsoft.com/downloads/details.aspx?familyid =AFE41F46-E213-4CBF-9C5B-FBF236E0E875 OS/Version: other Status: UNCONFIRMED Severity: normal Priority: P2 Component: advapi32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: focht(a)gmx.net Hello, after getting past bug 16879 one encounters this one. ---- Prerequisite: 1. clean WINEPREFIX 2. sh winetricks -q dotnet20 3. download .NET 3.0 Framework installer from: http://download.microsoft.com /download/4/d/a/4da3a5fa-ee6a-42b8-8bfa-ea5c4a458a7d/dotnetfx3setup.exe (sha1sum: a566bcd2ffffc3842a95adc57f7df3f8cd11577f) 4. export _SFX_CAB_SHUTDOWN_REQUEST=1 (workaround, see bug 9158) 5. wine ./dotnetfx3setup.exe It might take a while until all required packages are downloaded using BITS. Note: If you need to redo steps, backup the directory "dotnetfx304506.30" from "c:\\windows\\temp" to a different location, remove ~/.wine, copy "dotnetfx304506.30" again to "c:\\windows\\temp" to prevent BITS from downloading over and over again. ---- "c:\\windows\\temp\\dd_dotnetfx3error.txt": --- snip --- [01/11/09,12:50:20] Windows Communication Foundation: [2] Error: Installation failed for component Windows Communication Foundation. MSI returned error code 1603 [01/11/09,12:50:31] WapUI: [2] DepCheck indicates Windows Communication Foundation is not installed. [01/11/09,12:50:31] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 was not attempted to be installed. --- snip --- "c:\\windows\\temp\\dd_wcf_retMSI597F.txt": --- snip --- 1: C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe /r /x /y /v 2: 1: ERROR: Process returned non-0 value! CMDLINE: C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe /r /x /y /v 2: 1: Failed 2: --- snip --- and "c:\\windows\\temp\\dd_wcf_retCA69A1.txt": --- snip --- === Verbose logging started: 1/11/2009 12:50:17 Calling process: C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe === ServiceModelReg [12:50:18:302]: Warning: Could not detect IIS installation or IIS is disabled, skipping the Web Host Script Mappings component since it depends upon IIS to function properly. If you believe this message is an error, check your IIS installation to make sure it is installed properly. ServiceModelReg [12:50:18:329]: Information: The ServiceModelReg tool will take the following actions: Reinstalling configuration section system.serviceModel to C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. Reinstalling configuration section system.runtime.serialization to C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. Reinstalling configuration section system.serviceModel.activation to C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. Adding configuration entry for BuildProvider: System.ServiceModel.Activation.ServiceBuildProvider, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 Reinstalling compilation assembly node to System.Web section group: System.Runtime.Serialization, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL Reinstalling compilation assembly node to System.Web section group: System.IdentityModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitectur... ServiceModelReg [12:50:18:358]: Uninstalling: Machine.config Section Groups and Handlers ServiceModelReg [12:50:18:366]: Warning: Configuration section system.serviceModel does not exist in C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. ServiceModelReg [12:50:18:369]: Warning: Configuration section system.runtime.serialization does not exist in C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. ServiceModelReg [12:50:18:373]: Warning: Configuration section system.serviceModel.activation does not exist in C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. ServiceModelReg [12:50:18:374]: Installing: Machine.config Section Groups and Handlers ServiceModelReg [12:50:18:893]: Uninstalling: System.Web Build Provider ServiceModelReg [12:50:19:095]: Warning: A configuration entry for BuildProvider System.ServiceModel.Activation.ServiceBuildProvider, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 does not exist. ServiceModelReg [12:50:19:096]: Installing: System.Web Build Provider ServiceModelReg [12:50:19:138]: Uninstalling: System.Web Compilation Assemblies ServiceModelReg [12:50:19:153]: Warning: All compilation assembly nodes do not exist in System.Web section group. ServiceModelReg [12:50:19:154]: Installing: System.Web Compilation Assemblies ServiceModelReg [12:50:19:246]: Uninstalling: HTTP Handlers ServiceModelReg [12:50:19:260]: Warning: HttpHandlers node *.svc does not exist in System.Web section group. ServiceModelReg [12:50:19:261]: Installing: HTTP Handlers ServiceModelReg [12:50:19:322]: Uninstalling: HTTP Modules ServiceModelReg [12:50:19:333]: Warning: HttpModules node ServiceModel does not exist in System.Web section group. ServiceModelReg [12:50:19:334]: Installing: HTTP Modules ServiceModelReg [12:50:19:365]: Repairing: WMI Classes ServiceModelReg [12:50:19:396]: Warning: Failure executing "C:\windows\system32\wbem\mofcomp.exe" with parameters ""C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModel.mof"": System.IO.FileNotFoundException: Could not load file or assembly 'C:\windows\system32\wbem\mofcomp.exe' or one of its dependencies. Exception from HRESULT: 0x80070002 File name: 'C:\windows\system32\wbem\mofcomp.exe' at System.ServiceModel.Install.InstallHelper.ExecuteWaitHelper(String program, String parameters) at System.ServiceModel.Install.InstallHelper.ExecuteWait(String program, String parameters, Int32[] allowedExitCodes) at System.ServiceModel.Install.WmiInstallComponent.OnInstall(OutputLevel outputLevel) ServiceModelReg [12:50:19:516]: System.InvalidCastException: Retrieving the COM class factory for component with CLSID {4590F811-1D3A-11D0-891F-00AA004B2E24} failed due to the following error: 80004002. at System.Management.ManagementScope.InitializeGuts(Object o) at System.Management.ManagementScope.Initialize() at System.Management.ManagementScope.Connect() at System.ServiceModel.Install.WmiInstallComponent.get_IsInstalled() at System.ServiceModel.Install.WmiInstallComponent.ApplyNamespaceDacl(OutputLevel outputLevel) at System.ServiceModel.Install.WmiInstallComponent.OnInstall(OutputLevel outputLevel) at System.ServiceModel.Install.WmiInstallComponent.Reinstall(OutputLevel outputLevel) at Microsoft.Tools.ServiceModel.ServiceModelReg.PerformAction(ActionItem actionItem, Nullable`1 confirmUninstall) at Microsoft.Tools.ServiceModel.ServiceModelReg.Run(String[] args) at Microsoft.Tools.ServiceModel.ServiceModelReg.TryRun(String[] args) === Verbose logging stopped: 1/11/2009 12:50:19 === --- snip --- Oh joy ... WMI. Providing fake mofcomp.exe (returning success) is not enough, WCF installer will try *use* WMI hence there needs to be some working infrastructure: --- snip --- ServiceModelReg [19:37:29:832]: Starting tool 'C:\windows\system32\wbem\mofcomp.exe' with parameters '"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModel.mof"'. ServiceModelReg [19:37:29:895]: ServiceModelReg [19:37:29:896]: ServiceModelReg [19:37:29:897]: Tool 'C:\windows\system32\wbem\mofcomp.exe' with parameters '"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModel.mof"' exited with code '0'. ServiceModelReg [19:37:29:955]: System.InvalidCastException: Retrieving the COM class factory for component with CLSID {4590F811-1D3A-11D0-891F-00AA004B2E24} failed due to the following error: 80004002. at System.Management.ManagementScope.InitializeGuts(Object o) at System.Management.ManagementScope.Initialize() at System.Management.ManagementScope.Connect() at System.ServiceModel.Install.WmiInstallComponent.get_IsInstalled() at System.ServiceModel.Install.WmiInstallComponent.ApplyNamespaceDacl(OutputLevel outputLevel) at System.ServiceModel.Install.WmiInstallComponent.OnInstall(OutputLevel outputLevel) at System.ServiceModel.Install.WmiInstallComponent.Reinstall(OutputLevel outputLevel) at Microsoft.Tools.ServiceModel.ServiceModelReg.PerformAction(ActionItem actionItem, Nullable`1 confirmUninstall) at Microsoft.Tools.ServiceModel.ServiceModelReg.Run(String[] args) at Microsoft.Tools.ServiceModel.ServiceModelReg.TryRun(String[] args) === Verbose logging stopped: 1/8/2009 19:37:29 === --- snip --- This is a big blocker and getting WMI to work with Wine is imperative for .NET 3.0 and higher. Of course this also useful for older .NET Frameworks Roll-back, prepare clean WINEPREFIX again;-) We need to install native WMI core 1.5 from: http://www.microsoft.com/downloads/details.aspx?familyid=AFE41F46-E213-4CBF… Download wmicore http://download.microsoft.com/download/platformsdk/wmicore/1.5/W9XNT4/EN-US… (sha1sum: f7a36668eb6c82a28393637ffdf0ec6e8adfa6a1) Make sure you set winver to NT 4.0 (don't forget to reset to default) and execute the installer (I already have my own winetricks step for this): --- snip --- wine wmicore.exe --- snip --- The installer will then hang at some point "Configuring repository". With winedbg one can see following processes: --- snip --- Wine-dbg>info process pid threads parent executable (all id:s are in hex) 0000000c 5 0000000a 'services.exe' 0000000f 1 0000000a 'explorer.exe' 0000001b 4 0000000c 'winedevice.exe' 00000025 1 00000000 'wmicore.exe' 00000027 2 00000025 'GLBbab.tmp' 00000022 4 0000000c 'WinMgmt.exe' --- snip --- The problem is "WinMgmt.exe" which ought to be a service but due to Wine insufficiency the service thinks it's a normal process not showing usual service process behaviour as registering control handler and the like. If you do 'wineserver -k' and try to start anything with Wine nothing will happen until wineboot times out... As quickfix, start regedit (wait until wineboot timeout) and set service start type key for "WinMgmt" to manual start, e.g. "2" -> "3". Also a kernel driver (service) that is installed with WMI "smbios" fails to load but this currently harmless. If we look now in "c:\\windows\\system32\\WBEM" we see the whole stuff installed. The logs in "logs" subdirs are not revealing much so we have to increase the log level: --- snip --- [HKEY_LOCAL_MACHINE\Software\Microsoft\WBEM\CIMOM] "Logging"="1" "Logging Directory"="C:\\windows\\system32\\WBEM\\Logs" --- snip --- LogLevel is 0 to turn off logging, a 1 to turn on logging, and a 2 for verbose logging. After that, we manually try to start the service: --- snip --- $ wine net start winmgmt err:winedevice:ServiceMain driver L"smbios" failed to load The Windows Management Instrumentation service is starting. fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),2,2,(nil),32,(nil)) - stub! fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),1,3,(nil),0,(nil)) - stub! fixme:advapi:RegisterEventSourceW (L"",L"WinMgmt"): stub wine: Call from 0x7b844f54 to unimplemented function ole32.dll.CoSwitchCallContext, aborting err:rpc:I_RpcReceive we got fault packet with status 0x80000100 fixme:ole:CoCreateInstance no instance created for interface {00000000-0000-0000-c000-000000000046} of class {8bc3f05e-d86b-11d0-a075-00c04fb68820}, hres is 0xc0000005 --- snip --- This is bug 7187 After fixing this problem, we repeat the whole stuff again to get this in logs: --- snip --- (Sun Jan 11 13:41:41 2009) : Starting WinMgmt, ProcID = 26, CmdLine = , User = focht(Sun Jan 11 13:41:41 2009) : WinMgmt bIsService = 0, return code from function determining if service = 0(Sun Jan 11 13:41:41 2009) : WinMgmt gbRunAsApp = 1(Sun Jan 11 13:41:41 2009) : Starting Initialize, ID = 26(Sun Jan 11 13:41:41 2009) : Registered class factory with flags: 0x15 (Sun Jan 11 13:41:41 2009) : RegOpenKey returned 0x2 while trying to open the transports node. Using default transports!(Sun Jan 11 13:41:41 2009) : Initialize complete(Sun Jan 11 13:41:41 2009) : WindowProc got hWnd=20026, message=24, wParam=0, lParam=33f814(Sun Jan 11 13:41:41 2009) : WindowProc got hWnd=20026, message=81, wParam=0, lParam=33fce8(Sun Jan 11 13:41:41 2009) : WindowProc got hWnd=20026, message=83, wParam=0, lParam=33f974(Sun Jan 11 13:41:41 2009) : WindowProc got hWnd=20026, message=1, wParam=0, lParam=33fce8(Sun Jan 11 13:41:41 2009) : Inside the waiting function --- snip --- "WinMgmt bIsService = 0" is the culprit. The process retrieves token information and checks if process token groups contain "SECURITY_INTERACTIVE_RID" (-> normal process) or "SECURITY_SERVICE_RID" (service process). I think it's actually services.exe that adds the SECURITY_SERVICE_RID sid to the newly created service process (token groups). This requires some infrastructure, including wineserver. I already quick-hacked a path to verify this and it works as expected, letting the service successfully start ;-) Regards -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 24

[Bug 24963] New: Okad2: Unhandled page fault at address 0x00007f8a during startup
by wine-bugs＠winehq.org Nov. 26, 2025

Nov. 26, 2025

http://bugs.winehq.org/show_bug.cgi?id=24963 Summary: Okad2: Unhandled page fault at address 0x00007f8a during startup Product: Wine Version: unspecified Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: user32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: pandolfo(a)gis.net Created an attachment (id=31617) --> (http://bugs.winehq.org/attachment.cgi?id=31617) a description of the page fault plus an annotated backtrace During program startup, Okad2-xx-pd (xx = version) generates an unhandled page fault when loading an icon. The page fault is caused by CreateFileW as it processes the name of the file from the parameter list. The name pointer is 0x00007f8a, which is an address in an unmapped page. This value is also an index into Windows resources, selecting the hourglass icon. What has happened is that the application was attempting to load the hourglass icon and passed in BOTH the Windows resource index and a flag indicating LOADFROMFILE. Wine attempted to load-from-file and looked for the file name through the "name" parameter (0x00007f8a) generating the page fault. Native Windows appears to give the value of the "name" pointer precedence and determines that the "name" parameter is actually a resource number; hence it does not page fault and runs Okad2 normally. Wine *DOES* check the "name" parameter to see if it is a resource index, but several subroutine calls later it forgets this fact and branches based on the LOADFROMFILE bit. The backtrace has been annotated to provide both a description and source lines involved in the decision. This behavior was found in the latest version of Wine for Debian (.1.42) and in a MacOS X version. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 17

[Bug 15039] New: MSVC 6: Menu popdowns too narrow for arrows
by wine-bugs＠winehq.org Nov. 22, 2025

Nov. 22, 2025

http://bugs.winehq.org/show_bug.cgi?id=15039 Summary: MSVC 6: Menu popdowns too narrow for arrows Product: Wine Version: 1.1.1 Platform: PC-x86-64 OS/Version: Linux Status: NEW Severity: minor Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: claus.fischer(a)clausfischer.com CC: claus.fischer(a)clausfischer.com Microsoft Visual C++ 6 is working to a large extent. When opening a menu of the developer studio, the menu items with arrows (that open submenus) are not displayed correctly. The triangular arrows on the right end will stick out of the menu popdown area. I'm not sure if they just stick out to the end of the "shadow" (3d effect) around the popdown, or sometimes more. They should be fully contained in the popdown area. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 23

[Bug 11268] New: Civilization I for Windows (16-bt) incorrectly displays some dialogues
by wine-bugs＠winehq.org Nov. 18, 2025

Nov. 18, 2025

http://bugs.winehq.org/show_bug.cgi?id=11268 Summary: Civilization I for Windows (16-bt) incorrectly displays some dialogues Product: Wine Version: 0.9.53. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: gdi32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: neptunia(a)mail.ru Some dialogue windows in the game have non-rendered areas near window border which display garbage/previous windows existed in this place. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 39