January 2014 - Wine-Bugs - list.winehq.org

[Bug 3542] Dungeon Keeper Gold not starting
by wine-bugs＠winehq.org Jan. 12, 2014

Jan. 12, 2014

http://bugs.winehq.org/show_bug.cgi?id=3542 --- Comment #65 from Walter Woden <wodencafe(a)gmail.com> --- (In reply to comment #64) > I admit that in my original bug report I used keeper95.exe. > What is working is the d3d version: keepd3d.exe > I tested that. I'm undecided whether we still care about keeper95.exe ... > On the other hand the extension deeper95 does not seem to be included in the > direct3d version. Probably this warrants a new bug report. Theres are good points. So I have tried to run keepd3d.exe and deepd3d.exe from my Gold installation, and each one gives me this: wodencafe(a)ubuntu:~/.wine/drive_c/Program Files/Bullfrog/Keeper$ wine deepd3d.exe err:module:map_image Could not map section .reloc, file probably truncated err:module:map_image Could not map section .reloc, file probably truncated wine: Bad EXE format for C:\Program Files\Bullfrog\Keeper\deepd3d.exe. Nothing tries to run, no splash screen, just these errors. Am I doing something wrong? Can anyone else confirm this behavior? This is very different from what I would have expected given how KEEPER95.EXE runs. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 0

[Bug 3542] Dungeon Keeper Gold not starting
by wine-bugs＠winehq.org Jan. 12, 2014

Jan. 12, 2014

http://bugs.winehq.org/show_bug.cgi?id=3542 --- Comment #64 from Flo <CaptainSifff(a)gmx.de> --- I admit that in my original bug report I used keeper95.exe. What is working is the d3d version: keepd3d.exe I tested that. I'm undecided whether we still care about keeper95.exe ... On the other hand the extension deeper95 does not seem to be included in the direct3d version. Probably this warrants a new bug report. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 0

[Bug 3542] Dungeon Keeper Gold not starting
by wine-bugs＠winehq.org Jan. 12, 2014

Jan. 12, 2014

http://bugs.winehq.org/show_bug.cgi?id=3542 --- Comment #63 from Walter Woden <wodencafe(a)gmail.com> --- Created attachment 47175 --> http://bugs.winehq.org/attachment.cgi?id=47175 This is a log of a KEEPER95.EXE crash with +relay and +snoop debug turned on. This is a log of a KEEPER95.EXE crash with +relay and +snoop debug turned on. It is 180 kb compressed, 14.3 MB uncompressed. Please note the line "000d:Call KERNEL32.ExitProcess(00000000) ret=7f8129ca3adb" at line # 131,274. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 0

[Bug 3542] Dungeon Keeper Gold not starting
by wine-bugs＠winehq.org Jan. 12, 2014

Jan. 12, 2014

http://bugs.winehq.org/show_bug.cgi?id=3542 Walter Woden <wodencafe(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |wodencafe(a)gmail.com --- Comment #62 from Walter Woden <wodencafe(a)gmail.com> --- This does not appear to be working for me. Ubuntu 13.10 Saucy x64 Wine 1.7.10 To test, I installed a fresh copy of Wine 1.7.10 with no patches or anything, and then installed Dungeon Keeper Gold. After installation, I navigate to the Bullfrog/Keeper directory and try to launch KEEPER95.exe, it briefly pops up the DK splash screen, then disappears and I am left with this in my terminal: wodencafe(a)ubuntu:~/.wine/drive_c/Program Files/Bullfrog/Keeper$ wine KEEPER95.EXE p11-kit: couldn't load module: /usr/lib/i386-linux-gnu/pkcs11/p11-kit-trust.so: /usr/lib/i386-linux-gnu/pkcs11/p11-kit-trust.so: cannot open shared object file: No such file or directory fixme:win:EnumDisplayDevicesW ((null),0,0x160dff8,0x00000000), stub! fixme:ddraw:ddraw7_WaitForVerticalBlank iface 0x166480, flags 0x1, event (nil) stub! fixme:d3d_surface:d3dfmt_p8_init_palette No palette set. fixme:winediag:AUDDRV_GetAudioEndpoint Winepulse is not officially supported by the wine project fixme:winediag:AUDDRV_GetAudioEndpoint For sound related feedback and support, please visit http://ubuntuforums.org/showthread.php?t=1960599 fixme:mountmgr:harddisk_ioctl Unsupported ioctl 2402c (device=2 access=1 func=b method=0) fixme:mountmgr:harddisk_ioctl Unsupported ioctl 24008 (device=2 access=1 func=2 method=0) wodencafe(a)ubuntu:~/.wine/drive_c/Program Files/Bullfrog/Keeper$ --------------- In particular the line "fixme:d3d_surface:d3dfmt_p8_init_palette No palette set." is standing out to me, but this may not be the culprit. Please let me know if there is any additional testing or debug logs you would like from me. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 0

[Bug 35368] New: Browse For Folder (SHBrowseForFolderA?) does not allow me to see hidden files nor hidden folders.
by wine-bugs＠winehq.org Jan. 11, 2014

Jan. 11, 2014

http://bugs.winehq.org/show_bug.cgi?id=35368 Bug ID: 35368 Summary: Browse For Folder (SHBrowseForFolderA?) does not allow me to see hidden files nor hidden folders. Product: Wine Version: unspecified Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: shell32 Assignee: wine-bugs(a)winehq.org Reporter: amylenamon(a)yahoo.com Classification: Unclassified I'm trying to access Chromium's cache via ChromeCacheView for Windows. This app: http://www.nirsoft.net/utils/chrome_cache_view.html This is the location where the chromium cache is on ubuntu: ~/.config/chromium/Default/Application Cache/Cache Because the .config folder is hidden I can't access it via wine. Same problem with Notepad++ via Wine. This "Folder Browser" dialog allows access to hidden directories in Windows, but not Wine. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 2

[Bug 2082] DirectDraw games only showing black screen
by wine-bugs＠winehq.org Jan. 11, 2014

Jan. 11, 2014

https://bugs.winehq.org/show_bug.cgi?id=2082 --- Comment #140 from Ken Thomases <ken(a)codeweavers.com> --- If we're reasonably sure that there's always a meaningful device window, then we can change the extension to just provide a function: BOOL wglEnableFullScreenWINE(HDC hdc, BOOL enable); WineD3D would continue to use GetDC() to get the window's DC, but for full-screen it would use the above function to tell the driver to use the full-screen behavior. In wined3d_release_dc(), it would disable full-screen to reset the DC back to normal. (Since DCs are cached, the full-screen state would otherwise leak through to the next caller to reuse that DC.) In the drivers, tracking the pixel format would proceed as normal. It would be associated with the DC's window and could normally only be set once. (Or do we have a need for tracking the pixel format separately to avoid "contaminating" the window? If so, we could do that.) (In reply to comment #139) > A somewhat related issue is that for applications using OpenGL, the DC is > visible through wglGetCurrentDC(). I don't know if that will necessarily > break anything, but I wouldn't be terribly surprised if it did. Hmm. It seems quite unlikely that an app would call that while one of WineD3D's contexts was current. And if it did, what could it expect to be true about the returned DC? I guess it could assume it's a window DC and go astray. Anyway, with this altered proposal the DC would be the same as the current code, although it would be marked for full-screen behavior for OpenGL. > Also slightly related to this bug are bug 29301 and bug 30062. For bug 29301, using the proposed full-screen rendering mode in the driver would allow WineD3D to not muck with the window styles. The existing patches didn't make that change but it can certainly be done. I didn't understand the issue in bug 30062 well enough to know how it relates. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 0

[Bug 34894] New: Version 1.7.6 Compile Failure - Ubuntu 12.04
by wine-bugs＠winehq.org Jan. 11, 2014

Jan. 11, 2014

http://bugs.winehq.org/show_bug.cgi?id=34894 Bug #: 34894 Summary: Version 1.7.6 Compile Failure - Ubuntu 12.04 Product: Wine Version: unspecified Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: build-env AssignedTo: wine-bugs(a)winehq.org ReportedBy: support(a)securenetterm.com Classification: Unclassified Wine version 1.7.6 will not compile on a 32-bit Ubuntu 12.04 system. I get the following error: make[2]: Entering directory `/home/zkrr01/wine-1.7.6/tools' cc relpath.c -o relpath relpath.c:21:20: fatal error: config.h: No such file or directory compilation terminated. make[2]: *** [relpath] Error 1 make[2]: Leaving directory `/home/zkrr01/wine-1.7.6/tools' make[1]: *** [../../tools/relpath] Error 2 make[1]: Leaving directory `/home/zkrr01/wine-1.7.6/libs/wine' make: *** [libs/wine] Error 2 Note that on this same system, version 1.7.5 does compile correctly. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 4

[Bug 8320] DirectInput joystick timestamps are wrong
by wine-bugs＠winehq.org Jan. 10, 2014

Jan. 10, 2014

https://bugs.winehq.org/show_bug.cgi?id=8320 Alexandre Julliard <julliard(a)winehq.org> changed: What |Removed |Added ---------------------------------------------------------------------------- Target Milestone|1.6.x |--- --- Comment #20 from Alexandre Julliard <julliard(a)winehq.org> --- Removing 1.6.x milestone from bugs included in 1.6.2. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 0

[Bug 34719] New: cabinet_open{,_stream} returns 0 on failure but doesn't compliant to _open interface
by wine-bugs＠winehq.org Jan. 10, 2014

Jan. 10, 2014

http://bugs.winehq.org/show_bug.cgi?id=34719 Bug #: 34719 Summary: cabinet_open{,_stream} returns 0 on failure but doesn't compliant to _open interface Product: Wine Version: 1.7.4 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: msi AssignedTo: wine-bugs(a)winehq.org ReportedBy: flast(a)flast.jp Classification: Unclassified cabinet_open{,_stream} function returns 0 on failure, which function passed to FDICreate. Then, comments of FDICreate(in dlls/cabinet/fdi.c) says requirement of callbacks. I quote the comment about open callback: <quote> * pfnopen [I] A pointer to a function which opens a file. Uses * the same interface as _open. </quote> And MSDN documentation describes about _open, what should be compliant to. http://msdn.microsoft.com/en-us/library/z0kc8e3z(v=vs.110).aspx I also quote the Return Value section. <quote> Each of these functions returns a file descriptor for the opened file. A return value of -1 indicates an error, in which case errno is set to one of the following values. </quote> Therefore, cabinet_open{,_stream} should return -1 on failure. I attached a my candidate patch, please check it. Thanks, -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 7

[Bug 23529] New: build mechanism tried to find an outdated 'lcms' version
by wine-bugs＠winehq.org Jan. 10, 2014

Jan. 10, 2014

http://bugs.winehq.org/show_bug.cgi?id=23529 Summary: build mechanism tried to find an outdated 'lcms' version Product: Wine Version: 1.2-rc6 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: build-env AssignedTo: wine-bugs(a)winehq.org ReportedBy: sergstesh(a)yahoo.com While running 'configure' I see these lines in its screen output: 154 checking lcms.h usability... no 155 checking lcms.h presence... no 156 checking for lcms.h... no 157 checking lcms/lcms.h usability... no 158 checking lcms/lcms.h presence... no 159 checking for lcms/lcms.h... no . According to http://sourceforge.net/projects/lcms/files/ at the moment the latest tarball is lcms2-2.0a.tar.gz and its header files (when installed) are: " sergei(a)amdam2:~/junk> ls -ltr /mnt/sdb8/sergei/AFSWD_debug/install/lcms-2.0/include/ total 117 -rw-r--r-- 1 qemu users 24622 2010-07-05 03:59 lcms2_plugin.h -rw-r--r-- 1 qemu users 91214 2010-07-05 03:59 lcms2.h sergei(a)amdam2:~/junk> ". I.e. configure should check for version 2.0 or later and check existence of 'lcms2.h' rather than 'lcms.h' file. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 21