November 2023 - Wine-GitLab

[PATCH 0/5] MR4324: dmime: Implement segment chunked play.
by Rémi Bernon Nov. 7, 2023

Nov. 7, 2023

Will make it behave more like native for the tests, and avoid queueing every single message from every track on start (which may be large). -- https://gitlab.winehq.org/wine/wine/-/merge_requests/4324

3 10

Re: [PATCH v2 0/1] MR446: vkd3d-shader/ir: Synthesize HS inputs with the register index and write mask of the signature element. - approved
by Alexandre Julliard (＠julliard) Nov. 7, 2023

Nov. 7, 2023

This merge request was approved by Alexandre Julliard. -- https://gitlab.winehq.org/wine/vkd3d/-/merge_requests/446

1 0

Re: [PATCH v4 0/3] MR439: spirv: Use register sizes from the shader signature instead of the DCL instruction. - approved
by Alexandre Julliard (＠julliard) Nov. 7, 2023

Nov. 7, 2023

This merge request was approved by Alexandre Julliard. -- https://gitlab.winehq.org/wine/vkd3d/-/merge_requests/439

1 0

Re: [PATCH v2 0/1] MR449: ci: Expect builds to always succeed, even when tests are allowed to fail. - approved
by Alexandre Julliard (＠julliard) Nov. 7, 2023

Nov. 7, 2023

This merge request was approved by Alexandre Julliard. -- https://gitlab.winehq.org/wine/vkd3d/-/merge_requests/449

1 0

Re: [PATCH v2 0/2] MR448: hlsl: Properly handle allocation ranges that aren't aligned to a whole register. - approved
by Alexandre Julliard (＠julliard) Nov. 7, 2023

Nov. 7, 2023

This merge request was approved by Alexandre Julliard. -- https://gitlab.winehq.org/wine/vkd3d/-/merge_requests/448

1 0

Re: [PATCH v3 0/6] MR444: vkd3d-shader/ir: Check that blocks are correctly nested. - approved
by Alexandre Julliard (＠julliard) Nov. 7, 2023

Nov. 7, 2023

This merge request was approved by Alexandre Julliard. -- https://gitlab.winehq.org/wine/vkd3d/-/merge_requests/444

1 0

Re: [PATCH v7 0/7] MR435: vkd3d-shader/tpf: Support non-constant offset dereferences, v2, part 2. - approved
by Alexandre Julliard (＠julliard) Nov. 7, 2023

Nov. 7, 2023

This merge request was approved by Alexandre Julliard. -- https://gitlab.winehq.org/wine/vkd3d/-/merge_requests/435

1 0

[PATCH 0/3] MR450: Draft: vkd3d-shader/ir: Flatten structured control flow instructions.
by Conor McCarthy (＠cmccarthy) Nov. 7, 2023

Nov. 7, 2023

-- https://gitlab.winehq.org/wine/vkd3d/-/merge_requests/450

3 5

Re: [PATCH v9 0/5] MR409: vkd3d-shader/dxil: Implement the DXIL BINOP instruction.
by Henri Verbeet (＠hverbeet) Nov. 7, 2023

Nov. 7, 2023

> > Sure. I think the main alternative would be to split the IR in two (or more) separate IRs though. I.e., you'd have a representation of the parsed TPF, then convert that to VSIR, and from there to SPIR-V. > > The alternative I was considering would rather be to have only one IR, and use it for all shader language conversions, but not for disassembling. And then, for each language for which we support disassembling, have a dedicated disassembler (which probably doesn't really need an IR: it can emit as it parses). If we supported assembling too, we'd also have a dedicated assembler. Well, we could debate at which point something gets to be called an "IR", but essentially, we'd need to have some function that would e.g. parse TPF bytecode, and return something that might be called a "struct tpf_instruction". We'd then pass that to either the disassembler, or something that translates it to vsir. The main point is that we wouldn't be able to parse directly into vsir structures, unless we'd duplicate the parsing code for the disassembler. > In my mind, assembling/disassembling and compiling (or transpiling, if we want to look more modern!) are two different beasts. For compiling it's useful to have an IR which is flexible and simple, but it doesn't need to faithfully represent precisely all the features of any other language. OTOH for assembling/disassembling you don't really care about flexibility, but it's important to represent faithfully every detail of the language. > > My feeling is that trying to shove all these features (simplicity, flexibility, faithfullness to any language) on a single language is a bit overconstraining. Write dedicated assemblers and disassemblers is some additional work too, but I'm not sure the balance is in favor of our solution. I tend to think it is, but I could certainly imagine different people striking different balances. I suppose the good news is that it's relatively easy to have a go at giving it a try. My guess is that we'd end up duplicating most of the vsir structures, duplicate most of the disassembler, introduce extra tpf->vsir and vsir->tpf passes, and then would be able to remove some fields and enum elements from the vsir data structures. It's entirely possible that I'm underestimating the benefits though. And sure, I can see the appeal of having a more restricted/pure IR, having stronger separation between d3dbc/tpf/dxil/spirv/etc.; the practical benefits aren't quite as clear to me though. > > The disassembler would operate on TPF IR, as would certain lowering passes. That's certainly a valid choice, but I think it's important to point out that while it would make some thing easier, it would also make some things harder. The most obvious is perhaps that we'd need separate disassemblers for d3dbc, tpf, dxil, and vsir. Somewhat less obvious is perhaps that we may need to duplicate certain lowering passes between e.g. d3dbc and tpf, because we'd no longer be able to express them in vsir. It may also make it slightly harder to do something like HLSL IR -> vsir -> d3dbc, because we'd have to get rid of complex texturing instructions when converting HLSL IR to vsir, and then reintroduce them when converting vsir to d3dbc. > > If VSIR features are useful for translating between languages, then I agree it's sensible to have then. The part I don't like is having features only because some of the languages we support need to faithfully represent all their features (e.g., having to keep operations like NEG and ABS as register modifiers instead of as regular operators). Note that NEG and ABS modifiers aren't only used by the disassembler though; we also use these when writing output for the HLSL compiler. And sure, there are other ways to handle that as well, but as far as I can see they'd all be variants of "introduce struct tpf_instruction". > > We may want to tweak the vkd3d_shader_instruction_array data structure somewhat, but I don't think we'll need to do anything as drastic as converting the instruction array to a linked list; gap buffers tend to handle this kind of thing fairly well, and we may even be able to improve on that in specific instances. > > I don't know much about gap buffers, but after some reading on Wikipedia I'm not convinced. It seems that a gap buffers makes sense when you have a concept of a cursor that mostly moves locally, while our passes usually scan the whole program each time. With a gap buffer you would end up copying the whole program each time, and by that token you could directly rewrite it in a new array each time. I think that's a misunderstanding; the amount of data you'd move would only be the difference between the previous insertion position and the new insertion position. I.e., if you start with a sufficiently large gap at the front of the buffer, and move through the instructions from first to last, you'll move at most a single copy of the entire program in the worst case, and likely a fair bit less in typical cases. > Also, random insertion with gap buffers seems to be comparable to arrays. Random insertion should be rare though(!); the more typical case would be to go through the instructions from first to last, or possibly from last to first. > Following some link on Wikipedia, a [rope](https://en.wikipedia.org/wiki/Rope_\(data_structure\)) might be a better match for us, being essentially a compromise between an array and a link-based structure. Yeah, I'm aware of ropes. It doesn't seem obvious to me that they'd be better suited for our purposes, but ultimately I think this is one of those things where you start with the naive implementation, and then see whether making it more complicated makes it better. -- https://gitlab.winehq.org/wine/vkd3d/-/merge_requests/409#note_51376

1 0

[PATCH 0/1] MR446: vkd3d-shader/ir: Synthesize HS inputs with the register index and write mask of the signature element.
by Zebediah Figura (＠zfigura) Nov. 7, 2023

Nov. 7, 2023

-- https://gitlab.winehq.org/wine/vkd3d/-/merge_requests/446

4 5