wine-bugs May 2008

wine-bugs@winehq.org

2 participants
4586 discussions

[Bug 9925] New: Import fixups should be done before any user code is ran
by wine-bugs＠winehq.org 26 Sep '15

26 Sep '15

http://bugs.winehq.org/show_bug.cgi?id=9925 Summary: Import fixups should be done before any user code is ran Product: Wine Version: CVS/GIT Platform: PC OS/Version: Linux Status: NEW Severity: major Priority: P2 Component: wine-loader AssignedTo: wine-bugs(a)winehq.org ReportedBy: vitaliy(a)kievinfo.com SafeDisc 1.x fails to work on Wine because of this bug. Here is what happens: 1. SD creates a new process for the game with CREATE_SUSPENDED flag. 2. Injects some code into new process to be executed first 3. Resumes the new process. 4. Injected code is being executed 5. Wine does import fixups and fails because they are already fixedup (by an injected code). What should happen is Wine should not let injected code to run until final stages of the process setup are finished. In this case it is import fixups. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 13

[Bug 12445] New: Arcgisexplorer crashes in dbghelp
by wine-bugs＠winehq.org 24 Sep '15

24 Sep '15

http://bugs.winehq.org/show_bug.cgi?id=12445 Summary: Arcgisexplorer crashes in dbghelp Product: Wine Version: CVS/GIT Platform: PC URL: http://resources.esri.com/arcgisexplorer/index.cfm?fa=do wnload OS/Version: Linux Status: NEW Keywords: download Severity: enhancement Priority: P2 Component: dbghelp AssignedTo: wine-bugs(a)winehq.org ReportedBy: xerox_xerox2000(a)yahoo.co.uk A user submitted garbage for this into appdb so i gave it a try too: Needs .Net 2.0 (winetricks) but then crashes into dbghelp. I'll attach the crash Note: with native dbghelp it gets futher, then crashes because of msxml-bug. Using winetricks msxml3, it then ran into a segmentation fault. But when i ran with +relay channel to get some debug info, the application started just fine. So i guess is impossible to debug further atm :( -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 8

[Bug 12182] New: Supreme Commander needs additional DLLs (registered)
by wine-bugs＠winehq.org 19 Sep '15

19 Sep '15

http://bugs.winehq.org/show_bug.cgi?id=12182 Summary: Supreme Commander needs additional DLLs (registered) Product: Wine Version: 0.9.58. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: directx-dsound AssignedTo: wine-bugs(a)winehq.org ReportedBy: liquitsnake(a)gmx.net In order to get sound in this game, sample rate must be set to 48000 and a few DLLs are needed. These are: x3daudio1_0.dll x3daudio1_1.dll in order to get the game to start in first place xactengine2_0.dll xactengine2_1.dll xactengine2_2.dll xactengine2_3.dll xactengine2_4.dll xactengine2_5.dll xactengine2_6.dll these must be registered using regsvr32 to get sound. This is not the normal behaviour on Windoze (as long as you have newer DirectX installed) so this should be fixed in Wine. Also, the Forged Alliance addon for Supreme Commander needs X3DAudio1_2.dll In order to start. However registering the additional xactengine* which came out between the release of SupCom and its Addon will, in this case, NOT enable sound in the addon. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 66

[Bug 11687] New: Language MSI Installation fails while installing Corel Draw X3
by wine-bugs＠winehq.org 09 Sep '15

09 Sep '15

http://bugs.winehq.org/show_bug.cgi?id=11687 Summary: Language MSI Installation fails while installing Corel Draw X3 Product: Wine Version: 0.9.55. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: msi AssignedTo: wine-bugs(a)winehq.org ReportedBy: roli8200(a)yahoo.de Created an attachment (id=10898) --> (http://bugs.winehq.org/attachment.cgi?id=10898) Installation console log When installing Corel Draw X3, the original installer calles an other msi installer to install the language files. The msiexec brings just a error message out of this call. Maybe some parameters missing or wrong. Can it be that the msiexec doesn't support all original options? -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 26

[Bug 11583] New: Neverwinter Nights 2: outdoors textures sometimes all white/gray
by wine-bugs＠winehq.org 09 Sep '15

09 Sep '15

http://bugs.winehq.org/show_bug.cgi?id=11583 Summary: Neverwinter Nights 2: outdoors textures sometimes all white/gray Product: Wine Version: 0.9.54. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: Simetrical+wine(a)gmail.com When playing Neverwinter Nights 2, version 1.11.1153 (no expansion pack), sometimes in outdoors environments all textures are white or gray, making navigation fairly hard. Apparently this occurs only during the daytime. I've attached a debug log from me starting the game, loading a saved game exhibiting the problem, wandering around for a minute, and then exiting, with debug options: warn+all,debug+all,err+all,+trace. Some relevant-looking lines that are repeated very frequently are: warn:d3d_shader:IWineD3DVertexShaderImpl_CompileShader Swizzled attribute validation required an expensive comparison fixme:d3d_shader:shader_glsl_select >>>>>>>>>>>>>>>>> GL_INVALID_OPERATION (0x502) from glUseProgramObjectARB @ glsl_shader.c / 3226 Especially the second. But what do I know. :) If there's anything else I can do to help (screenshot? different debug options?) please say. See also comment at <http://appdb.winehq.org/objectManager.php?sClass=version&iId=10531>: "The outdoor setting that was used in many of the towns and villages had light problems. The problem seemed to arise at daytime, and seemed to be a result of incorrectly handled light effects. It resulted in a screen that was too bright, often so bright that nothing at all could be seen. The only remedy was either to wait for the night to kick in or to try to navigate using the map which was really annoying." -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 31

[Bug 11387] New: SMP/Dual core performing worse than single core
by wine-bugs＠winehq.org 09 Sep '15

09 Sep '15

http://bugs.winehq.org/show_bug.cgi?id=11387 Summary: SMP/Dual core performing worse than single core Product: Wine Version: 0.9.54. Platform: Other OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: jcollins(a)asgardsrealm.net I searched for another bug report on this but did not find anything. I've tested the same application on two similar systems with similar software loads. Essentially, the application (Majesty) preforms considerably better on a single core system than it does on a more powerful dual core system. Single Core System: AMD Athlon(tm) 64 Processor 3300+ 1.5 Gig RAM GeForce 6200 256M Dual Core System: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ 2 Gig RAM GeForce 7800 256M Both systems are running Debian Etch, with kernel version 2.6.18-5-k7, NVIDIA GLX Module 100.14.19, and Wine 0.9.53 (using Scott's packages). I would expect the dual core system to run as well, if not better, than the single core system. However, it is extremely sluggish on the dual core system and blazingly fast (in some cases needing to be slowed down) on the single core. I have also tested the dual core system with 0.9.54 (built using Scott's 0.9.53 package as a basis), with no improvement. I'll happily provide any additional information that would be helpful. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 18

[Bug 12804] New: winecfg: pressing enter in library override closes winecfg
by wine-bugs＠winehq.org 09 Sep '15

09 Sep '15

http://bugs.winehq.org/show_bug.cgi?id=12804 Summary: winecfg: pressing enter in library override closes winecfg Product: Wine Version: 0.9.60 Platform: PC OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: programs AssignedTo: wine-bugs(a)winehq.org ReportedBy: austinenglish(a)gmail.com CC: jeffzaroyko(a)gmail.com Pressing enter when entering a dll override doesn't add the override. For those of us that find mice an exercise in masochism and prefer keyboards, it's quite a pain... -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 39

[Bug 9848] New: flipviewer fails to load
by wine-bugs＠winehq.org 04 Sep '15

04 Sep '15

http://bugs.winehq.org/show_bug.cgi?id=9848 Summary: flipviewer fails to load Product: Wine Version: 0.9.46. Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: major Priority: P3 Component: wine-advapi32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: eyecreate(a)gmail.com Created an attachment (id=8321) --> (http://bugs.winehq.org/attachment.cgi?id=8321) Error log for flipviewer The flipviewer(www.flipviewer.com) app installs and the library program works, but the actual program fails. Backtrace log attached. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

1 15

[Bug 12454] New: iriver plus 3 doesn't start
by wine-bugs＠winehq.org 21 Aug '15

21 Aug '15

http://bugs.winehq.org/show_bug.cgi?id=12454 Summary: iriver plus 3 doesn't start Product: Wine Version: 0.9.58. Platform: PC URL: http://www.iriver.com/plus/ OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: hewus.owns(a)gmail.com iriver plus 3 installs, but does not start. I added mfc42u.dll to get rid of missing dll messages, but it now ends here (0.9.59): err:module:attach_process_dlls "iDeviceM.dll" failed to initialize, aborting err:module:LdrInitializeThunk Main exe initialization for L"C:\\Program Files\\iriver\\iriver plus 3\\iPlus3.exe" failed, status c0000142 I tried yesterday on 0.9.58 and got this: err:module:LdrInitializeThunk "iDeviceM.dll" failed to initialize, aborting err:module:LdrInitializeThunk Main exe initialization for L"C:\\Program Files\\iriver\\iriver plus 3\\iPlus3.exe" failed, status c0000142 The errors are slightly different, if that helps at all. I am able to provide more debugging if required. Free download: http://www.iriver.com.au/iriver/uploads/software/iplus3_setup_full.zip -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 27

[Bug 13466] New: Samsung PC Studio: cannot connect to /dev/ttyACM0
by wine-bugs＠winehq.org 08 Aug '15

08 Aug '15

http://bugs.winehq.org/show_bug.cgi?id=13466 Summary: Samsung PC Studio: cannot connect to /dev/ttyACM0 Product: Wine Version: 1.0-rc2 Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: edwin.smulders(a)gmail.com Created an attachment (id=13383) --> (http://bugs.winehq.org/attachment.cgi?id=13383) log "wine Launcher.exe" /dev/ttyACM0 is the device that appears when i connect my mobile phone with the USB cable. Note that gammu/wammu detects my phone on this port but can't connect either. Samsung PC Studio doesn't give any messages as to why it can't connect, it doesn't even say it can't. This bug might be a duplicate of some other usb/serial port device bug, but i leave that to the judgement of somebody with more experience. Attached is the log from running "wine Launcher.exe" -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 20

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-bugs May 2008