wine-bugs May 2009

wine-bugs@winehq.org

2 participants
5809 discussions

[Bug 12283] New: Source Insight does not refresh the screen
by wine-bugs＠winehq.org 24 Jan '12

24 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=12283 Summary: Source Insight does not refresh the screen Product: Wine Version: 0.9.58. Platform: Other OS/Version: other Status: NEW Keywords: download, regression Severity: normal Priority: P2 Component: winex11.drv AssignedTo: wine-bugs(a)winehq.org ReportedBy: scott(a)open-vote.org >From Launchpad: https://bugs.edge.launchpad.net/ubuntu/+source/wine/+bug/208853 I have installed Source Insight, v3.50.0058 (http://www.sourceinsight.com), under Wine (0.9.58-0ubuntu2) under Hardy Beta. Source Insight is a code editor and browser. You can install a time-limited copy if you want. Anyway, having used this under Wine under Ubuntu for 18 months, with only a couple of niggly problems, I decided to upgrade (by doing a wipe + fresh install) to Hardy Beta. Since then, Source Insight has exhibited major problems. These all centre around NOT refreshing the screen after things happen: (1) Opening a new source-file window and moving it. Also resizing an existing window. (2) Minimising and then maximising the Source Insight window itself. In both cases, the screen inside the Source Insight window does not refresh. Moving the window around the screen does nothing (except get a nice swirly pattern of a repeating window title-bar inside the window itself. The only way I have found to cure the problem and make the window refresh itself is to switch to the second workspace, wait a few seconds (until the window with the "Go to left workspace ..." pops up) and then switch back. THEN the window refreshes. Sometimes. If it does not, switch to the other workspace again and wait longer before switching back. This is on a Dell D620 with an nVidia "G72M [Quadro NVS 110M/GeForce Go 7300]" and a second Dell 2007FP display attached. I'm running the graphics in TwinView mode (which means a manually configured xorg.conf, attached [see launchpad]). Going to System -> Preferences -> Appearance -> Visual Effects shows that "None" is currently active. --- The problem seems a LOT worse when running with the two displays and with the Source Insight window on the second (non-laptop) display. When running in single-display mode (i.e. at home instead of work), the "new source file window" problem does not seem to occur so much. The "minimising/maximising" problem occurs all the time, whatever the display being used. --- I believe the last version this worked with for this user was 0.9.46 (the one that came with Ubuntu Gutsy). -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 33

[Bug 15519] New: Soldier of Fortune 2
by wine-bugs＠winehq.org 24 Jan '12

24 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=15519 Summary: Soldier of Fortune 2 Product: Wine Version: 1.0.0 Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: christian_obst(a)gmx.de Does not get past the intro when starting the game. Instead, it falls back to the console that is shown in the beginning, complaining: FS_FOpenFileRead: name has a space (fonts/Creating STM %s... .fontdat) Note: this error message is generated by the game itself, not by wine. It is printed in "Soldier of Fortune 2 Console". -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 9

[Bug 18552] New: Kompas-3D 10: icons are turned over
by wine-bugs＠winehq.org 24 Jan '12

24 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=18552 Summary: Kompas-3D 10: icons are turned over Product: Wine Version: 1.1.21 Platform: Other URL: http://ascon.net/download/kompas/ OS/Version: other Status: UNCONFIRMED Severity: trivial Priority: P3 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: b0ntrict0r(a)yandex.ru Created an attachment (id=21214) --> (http://bugs.winehq.org/attachment.cgi?id=21214) Toolbar with incorrectly drawn icons Icons in menus, toolbars and tooltips in Kompas-3D 10 are turned over. I'm not using DLL submission in wine, program has ben run after removing .wine directory in $HOME. I don't know whether it's a regression. Demo version in English can be downloaded for free, but it's not exactly the same version that I'm using. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 6

[Bug 17344] New: Lightwave Screamernet: v9.6 fails to start with "gcore9.ll failed to initialize"
by wine-bugs＠winehq.org 24 Jan '12

24 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=17344 Summary: Lightwave Screamernet: v9.6 fails to start with "gcore9.ll failed to initialize" Product: Wine Version: 1.1.14 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: philip(a)emcorp.force9.co.uk Created an attachment (id=19379) --> (http://bugs.winehq.org/attachment.cgi?id=19379) Debug trace (+relay,+seh,+tid) Overview: Attempting to run Newtek Lightwave Screamernet (LWSN.EXE) version 9.6 results in the following error message: err:module:attach_process_dlls "gcore9.dll" failed to initialize, aborting err:module:LdrInitializeThunk Main exe initialization for L"C:\\lwsn96\\lwsn.exe" failed, status c000001d Steps to reproduce: Kick off LWSN from the command line in mode 3, eg: wine C:/lwsn96/lwsn.exe -3 -cC:/lwsn96/Config -dC:/Content scenes/testscene.lws 1 1 1 Actual result: LSWN.EXE fails to start (error message above) Expected result: LWSN.EXE should load the Lightwave scene data, render a 3D image and save it. Build & Platform: Wine 1.1.14 on openSUSE 11.1 & openSUSE 11.0 Additional Info: Trial version of Lightwave 9.6 (which includes LWSN.EXE) available here: http://www.newtek.com/lightwave/lwtrial.php NOTE: All versions 9.x prior to 9.6 work fine with Wine 1.1.14 on openSUSE 11.0 & 11.1 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 13

[Bug 13839] New: Steam hangs in SteamStartup() attempting to connect to servers
by wine-bugs＠winehq.org 24 Jan '12

24 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=13839 Summary: Steam hangs in SteamStartup() attempting to connect to servers Product: Wine Version: 1.0-rc4 Platform: All OS/Version: Solaris Status: UNCONFIRMED Severity: normal Priority: P2 Component: winsock AssignedTo: wine-bugs(a)winehq.org ReportedBy: trisk+winehq(a)acm.jhu.edu Created an attachment (id=13899) --> (http://bugs.winehq.org/attachment.cgi?id=13899) Gzipped output of WINEDEBUG=trace+relay wine Steam.exe Running Steam results in strange behaviour on Solaris and OpenSolaris. When Steam is first installed (using either the current MSI installer or an older standalone installer), it successfully updates itself and automatically restarts. , On restart, it spews extensive messages to the console about connection attempts to all 100+ CSDS servers with latency. For example, the last couple of lines are: CellID: Connecting to 87.248.209.212:27031. . . CellID: Connect to 87.248.209.212:27031 took 110 MS CellID: !! Got Cell ID 2 from server 69.28.153.90:27031 It then makes no further progress and appears to hang. If interrupted with Ctrl-C, it displays a "SteamStartup() failed" messagebox before exiting. When started again, Steam.exe prints set of "CellID:" messages showing that is is connecting to a particular server, then blocks for at least a minute, then connects to a different server. This goes on indefinitely. I'm attaching a WINEDEBUG=trace+relay log (to reduce log size, this Steam instance was interrupted after about 30 seconds). I can't do WINEDEBUG=trace+all because it results in an error message from Steam about being unable to load SteamUI.dll. This seems to be a network related issue, but I'm not entirely certain. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 17

[Bug 15431] New: Problem with several Xservers
by wine-bugs＠winehq.org 24 Jan '12

24 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=15431 Summary: Problem with several Xservers Product: Wine Version: CVS/GIT Platform: Other OS/Version: other Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: lich(a)math.spbu.ru Created an attachment (id=16294) --> (http://bugs.winehq.org/attachment.cgi?id=16294) screenshot I have several Xservers with different geometry: :0 - real Xorg server - 1280x1024 :1 - vnc server (or Xnest) - 1024x768 If I run any wine app first time in smaller X (:1) and then on bigger X (:0), it gets corrupted outside 1024x768 region - exactly the size of smaller X. If I use wine virtual desktop feature (X server does not matter), this bug does not appear. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 11

[Bug 15682] New: Naviter Seeyou ignores 'Register' button
by wine-bugs＠winehq.org 24 Jan '12

24 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=15682 Summary: Naviter Seeyou ignores 'Register' button Product: Wine Version: 1.1.6 Platform: Other URL: http://www.naviter.si/products/seeyou.php?Itemid=213 OS/Version: other Status: NEW Keywords: download Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: dank(a)kegel.com A user complained in the appdb that he could not register Naviter SeeYou, so I gave it a try. To register, you have to do Help / Register, type in your key, and click the Register button. Sure enough, clicking that button seems to do nothing. Annoyingly, the app's main menu was detached when I ran it, and the floating main menu was behind all the windows. So if you can't find the Help menu, try closing the app's inner windows. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 4

[Bug 12045] New: foobar2000 0.9.4.4 - window close lag
by wine-bugs＠winehq.org 24 Jan '12

24 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=12045 Summary: foobar2000 0.9.4.4 - window close lag Product: Wine Version: 0.9.57. Platform: PC URL: http://www.foobar2000.org/ OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: liquid.acid(a)gmx.net I have some mysterious lag when working with foobar2000 version 0.9.4.4 When having windows (opened by foobar2k itself) open, like the file property dialogue, or a file scan result window and I close this particular window SOMETIMES (not always) I have some serious lag. Which means I click the X-button, and at first nothing happens. Now I can do different things: 1) Sometimes moving the mouse around triggers window closing 2) Sometimes dragging the still open window around triggers closing 3) Pushing the X a second time sometimes does the trick I didn't notice this with wine-0.9.56, so it seems to be a regression. I'm still trying to figure out some actions to always reproduce the problem, but currently I'm not successful. This problem is not bound to CPU usage. It also appears when the CPU is idling at 99%. Gonna try a bisect, but as I know no way to accurately reproduce it... Someone with similar problems? Maybe not only fb2k? Thanks, Tobias -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 31

[Bug 18627] New: Sudden Strike 2 crashes after first movie.
by wine-bugs＠winehq.org 24 Jan '12

24 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=18627 Summary: Sudden Strike 2 crashes after first movie. Product: Wine Version: 1.1.21 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: dik_again(a)yahoo.com Created an attachment (id=21327) --> (http://bugs.winehq.org/attachment.cgi?id=21327) output to a console A game crashes after it plays the intro movie. Or, when it find no movie, then crashes immediatly with the same backtrace. details in an attaachment -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 7

[Bug 14848] New: PVPGN loader for Warcraft 3 v1.22
by wine-bugs＠winehq.org 24 Jan '12

24 Jan '12

http://bugs.winehq.org/show_bug.cgi?id=14848 Summary: PVPGN loader for Warcraft 3 v1.22 Product: WineHQ Apps Database Version: unspecified Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: blocker Priority: P2 Component: appdb-unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: saidin54(a)gmail.com Running w3l.exe produces a "Memory protection" error. The line of code which fails has a call to VirtualProtectEx. A copy of the loader can be found at http://war3.co.za/downloads/patches/w3l-1.22.rar. My Linux distribution is Gentoo. I have this bug on all versions of Wine. I have tried updating to 1.1.2 off the wine-9999 ebuild for git - and it worked. But, as soon as I reset the machine, the problem returned. Uninstalling and reinstalling 1.1.2 did not (even temporarily) fix the problem. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 21

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-bugs May 2009