http://bugs.winehq.org/show_bug.cgi?id=9504
Summary: Cannot close CMonthCalCtrl popup by clicking outside
popup
Product: Wine
Version: CVS/GIT
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: wine-user
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: peter(a)cendio.se
I have an application that uses a custom control: A wrapper that displays a
CMonthCalCtrl in a popup window. In Windows, it's possible to close the popup
by clicking outside the popup. With Wine, however, it is necessary to either
select a date or press Escape. The popup will also be closed if the user tries
to move the popup window (which has X11 WM decorations). When clicking outside
the popup with Wine, Wine generates a beep through X11 (I believe this happens
since a WM_SETCURSOR with HTERROR is generated).
A demo program is available as
http://www.cendio.se/~astrand/wine/6-close-popup/. Requires Visual C++ 2005
runtime libraries.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14823
Summary: TSM Casin doesnt start after adding a contact
Product: Wine
Version: 1.1.0
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jacobidiego(a)gmail.com
TSM Casin is a software used mostly in Argentina to send SMS to cellphones
using the services provided by some webpages or sending e-mails.
The software as a development value is a crap, the developer have programmed it
with Visual Basic, have used ActiveX to attach IE to a tiny square so it can
display the Validation image, instead of just comunicating via http, have a
banner in the middle and a lot of cuestionable choices. But it is very usefull
and there isnt any linux similar tool.
It implements a custom Contact list, which is the one that is causing troubles,
everything else works fine, it can send SMS's correctly and IE-ActiveX doesnt
makes any issue.
When adding a contact and after filling all the information required (Name,
Cellphone Company, and Cellphone Number), and clicking start, the window should
close and the name should list on the contact list, but it doesnt close, then
clicking again on OK gives a warnning saying that the contact already exist,
and endeed it was added, so to close the wine i have to press Cancel.
Then i can use the contact list normally with any issue, but after closing TSM
and launching it again, it stays on an unuseful load-screen.
Then to get back TSM it is necessary to remove the created contacts, This is
done by deleting the registry key:
HKEY_USERS\S-1-5-4\Software\VB and VBA Program Settings\TSM\Agenda1.0
But copying the cellphones all the time is not a very good aproach.
The download is:
http://www.tsmcasin.com/ir/?id=16
and is freeware with only unharmful banners on it.
There is just 1 post on its forums asking for a linux version:
http://foro.tsmcasin.com/tsmforo/viewtopic.php?f=15&t=716&p=2374&hilit=gpl#…
The developer stays says that windows is standard and linux dont and that wont
be a version for linux.
I know that the best solution would be to develop a real and good open source
application to handle this stuff for all people under the world, but this wont
happen any time soon, and in the mean time, the this problem can be firing a
simple error easy to fix on wine.
Cheers.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14221
Summary: After Wineboot startup
Product: Wine
Version: 1.0.0
Platform: Other
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: deepblu(a)poczta.fm
Created an attachment (id=14508)
--> (http://bugs.winehq.org/attachment.cgi?id=14508)
wine_dump
After Wineboot start i have message like in attachment;
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14827
Summary: Autocad 2005 : Multiline text edit crashes application
Product: Wine
Version: CVS/GIT
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: max(a)veneto.com
If you try to edit a multiline text (MTEXT) or a dimension text on autocad
(tested on 2005), following happens :
1) The editor is (correctly) shown, but edited text is not visible on text area
2) If you use ESC to abort command, you retourns on autocad correctly
3) If you press OK button to accept changes, the whole autocad hangs.
Ciao
Max
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14422
Summary: AutoCAD 2005 fails to start
Product: Wine
Version: 1.1.0
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: r.snajdr(a)coramexport.cz
AutoCAD 2005 now installs but it wont start. It reports some problems about
gdiplus. I tryed to istall another one from ddl.com but it did not help
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13838
Summary: AutoCAD 2005 setup : Missing backslash in registry entry
and profile path
Product: Wine
Version: 1.0-rc4
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: max(a)veneto.com
During setup of AutoCAD2005, some values in registry are incorrectly set.
In detail, what should be :
C:\\windows\\profiles\\massimo\\Applicazioni\\Autodesk\\AutoCAD 2005\\......
Is instead written like that :
C:\\windows\\profiles\\massimo\\ApplicazioniAutodesk\\AutoCAD 2005\\
Note the missing '\\' between 'Applicazioni' and 'Autodesk'
Folders in profile are created accordingly, so instead of :
massimo
Applicazioni
Autodesk
It's created as :
massimo
ApplicazioniAutodesk
That brings problems in some addons (like ExpressTools for autocad) and, I
guess,
it's the cause for the first-run error messagebox.
I think some path-related functions in wine is missing the terminating \\.
Ciao
Max
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10635
Summary: Tivo Desktop 2.5.1 will not install
Product: Wine
Version: 0.9.50.
Platform: PC
URL: http://www.tivo.com/mytivo/domore/tivotogo/windows.html
OS/Version: Windows XP
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: joseph_scott123(a)msn.com
When trying to install Tivo Desktop 2.5.1 I get the following messages and it
fails to install.
fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),0,3,(nil),0,(nil)) - stub!
err:ole:CoGetClassObject class {6c736db1-bd94-11d0-8a23-00aa00b58e10} not
registered
err:ole:CoGetClassObject no class object {6c736db1-bd94-11d0-8a23-00aa00b58e10}
could be created for context 0x1
fixme:msi:AutomationObject_GetIDsOfNames Unknown member L"UILevel", clsid
{000c1090-0000-0000-c000-000000000046}
fixme:seh:_abnormal_termination (void)stub
fixme:seh:_abnormal_termination (void)stub
fixme:seh:_abnormal_termination (void)stub
Usage:
Install a product:
msiexec {package|productcode} [property]
msiexec /i {package|productcode} [property]
msiexec /a package [property]
Repair an installation:
msiexec /f[p|o|e|d|c|a|u|m|s|v] {package|productcode}
Uninstall a product:
msiexec /x {package|productcode} [property]
Advertise a product:
msiexec /j[u|m] package [/t transform] [/g languageid]
msiexec {u|m} package [/t transform] [/g languageid]
Apply a patch:
msiexec /p patchpackage [property]
msiexec /p patchpackage /a package [property]
Modifiers for above operations:
msiexec /l[*][i|w|e|a|r|u|c|m|o|p|v|][+|!] logfile
msiexec /q{|n|b|r|f|n+|b+|b-}
Register a module:
msiexec /y module
Unregister a module:
msiexec /z module
Display usage and copyright:
msiexec {/h|/?}
NOTE: Product code on commandline unimplemented as of yet
Copyright 2004 Vincent B�ron
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17277
Summary: Remote virtual memory allocation error
Product: Wine
Version: 1.1.13
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: loader
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gabmoa(a)yahoo.it
ZFlash is a win32 application used to simulate and edit part programs
for a cnc. The simulator part is achieved running a reduced version
of numerical control into a fixed memory map from 1 to 8 MB (the current
version is from 1-16 MB but it's the same principle). The numerical control
need to be mapped in this way because it uses fixed addresses.
The application runs in NT 4 SP6, 2000, XP and Vista MS OS but in wine
it doesn't work.
I have seen there is a problem in the memory mapping when I try to run the
application into wine so I've created a reduced example with the only
"incriminated" part. In the attached zip file there are 3 projects:
ZLoader, Z32Sim and Test.
The steps involved are the same of the complete win32 application.
ZLoader.exe create the process 'Test', suspended, and try to reserve memory
of 'Test' from 1 to 8 MB, then it resumes the process.
Test.exe is compiled with the linker flags
/base:"0x800000" /stack:0x800000,0x1000
so the big stack can not be inserted into the first 8MB and the
base of exe is changed from the default 4MB assigned by Visual Studio.
Z32Sim.dll is loaded into 'Test' and it have to map the memory (1-8MB).
To test it in the Debug directory we can execute ZLoader Test.exe
In wine Test fail when ZLoader try to resume it (I've seen that with winedbg)
with the following error:
err:seh:raise_exception Unhandled exception code c0000005 flags 0 addr
0x7ef9e617
Unfortunately it seems a not so easy task because with winedbg I can't
attach to Test process when it's suspended.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17807
Summary: Electronics Workbench 5.12: measurement units aren't
shown
Product: Wine
Version: 1.1.17
Platform: PC
URL: http://appdb.winehq.org/objectManager.php?sClass=version
&iId=402
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: nick(a)vyalceva.net
Created an attachment (id=20039)
--> (http://bugs.winehq.org/attachment.cgi?id=20039)
the oscilloscope window
When trying to set measurement unit for a parameter in the "Component
Properties" window, or in the oscilloscope, measurement units are not shown in
the selection box.
But I can view it by copying from the box and pasting in a text editor, e.g.
"0.50 s/div ".
Old wine version 0.9.52 shows units in the oscilloscope window, but doesn't do
it in the component properties
(http://appdb.winehq.org/screenshots.php?iAppId=267&iVersionId=402).
Also I get the following error message on exit: "access violation on
(FFF4EFFF), reading C4".
Running from terminal shows me the only line
"fixme:font:WineEngRemoveFontResourceEx :stub".
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.