http://bugs.winehq.org/show_bug.cgi?id=16835
Summary: Crashes on start - shows only splash screen -
comctl32.dll dependency
Product: Wine
Version: 1.1.1
Platform: PC
URL: http://www.laridian.com/pc/
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: comctl32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: david(a)rossall61.freeserve.co.uk
Created an attachment (id=18543)
--> (http://bugs.winehq.org/attachment.cgi?id=18543)
Log file
When the PocketBible application is started, the splash screen appears, but
nothing else. Errors are reported on the command line. The attached log file is
generated from a clean Wine install.
After discussion in this thread, I tried using winetricks cc580 to install a
native comctl32.dll:
http://forum.winehq.org/viewtopic.php?p=17535#17535
The DLL installed was v5.80 and the application then produced an error
indicating that v5.81 minimum is required. I substituted a native DLL of this
version and the application now runs successfully.
I noticed that replacing the Wine DLL with the native v5.81 directly is not
sufficient and it is necessary first to use winetricks as above and then to
substitute the later version DLL.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19226
Summary: Braid: Both Shift keys needed to move puzzle pieces
Product: Wine
Version: 1.1.25
Platform: PC
URL: http://www.playgreenhouse.com/game/NNONE-000001-01/
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: elton(a)schiert.net
Steps to reproduce:
-Download Braid Demo from http://www.playgreenhouse.com/game/NNONE-000001-01/
-Install and run it
-Enter the first level and play until you have collected at least one puzzle
piece
(this takes just one minute)
-You can now exit the level and go back to the house
-Stand in front of the puzzle area and use it
-On this screen you are supposed to be able to move the pieces around by
placing
the cursor over them, holding any Shift key and using the cursor keys or WASD
-This works on Windows; but with Wine I need to press both (left and right)
Shift
keys to be able to move a piece
Notes:
-Only the puzzle screen is affected. Rest of the game works with any Shift key.
-Once both Shift keys have been pressed in order to "grab" a piece one can let
go
one key and is still able to move the piece around until one lets go of the
2nd
Shift key. Only then the piece is "released"
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17614
Summary: Rise of Nations: Both mouse keys required for single
left-click
Product: Wine
Version: 1.0.0
Platform: PC
URL: http://www.microsoft.com/games/thronesandpatriots/downlo
ads.aspx
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P4
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kennybobs(a)o2.co.uk
I don't know when this first started, but this is apparent in Wine 1.0.0
through 1.1.16.
The cursor in Rise of Nations and it's expansion Thrones and Patriots ignores
right-clicks and left-clicks. Clicking BOTH left and right mouse button acts
as a left click.
There is a workaround. Editing the rise2.ini file, setting "ForceGDICursor=1"
allows the cursor/mouse to behave normally. It also corrects a transparency
problem with the cursor.
I don't know what traces might be relevant here...
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18288
Summary: Quicktime 3 creates unusual menus / string value error
Product: Wine
Version: 1.1.20
Platform: PC
URL: http://www.oldversion.com/download/quicktime302.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kennybobs(a)o2.co.uk
Created an attachment (id=20819)
--> (http://bugs.winehq.org/attachment.cgi?id=20819)
Wine 1.1.20 +menubuilder
The Quicktime 3.0.2 installer reports an error when attempting to create
program groups and icons:
"String variable is not large enough for string.
Check the string declarations.
Error 401."
The installer then creates an unusual directory structure:
ls -aR /home/test/.local/share/applications/wine/Programs
/home/test/.local/share/applications/wine/Programs:
. .. QuickTime QuickTime 3.0
/home/test/.local/share/applications/wine/Programs/QuickTime:
. .. MoviePlayer.desktop PictureViewer.desktop ReadMe.desktop UnInstall
QuickTime 3.0.desktop
/home/test/.local/share/applications/wine/Programs/QuickTime 3.0:
. .. .desktop
Setup completes successfully.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15590
Summary: Photoshop CS3 fails due to Bonjour Service startup error
Product: Wine
Version: CVS/GIT
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gimpel(a)sonnenkinder.org
Created an attachment (id=16593)
--> (http://bugs.winehq.org/attachment.cgi?id=16593)
photoshop cs3 bonjour error
I'm still having problems installing Photoshop CS3. It fails due to the bonjour
service not starting correctly. The shared components seem to install correctly
though.
Wine version is yesterday's GIT (1.1.6+). My system does have mDNSResponder
installed, but not started. Otherwhise there is no support for Zeroconf
protocol available (No avahi, no nss-mdns installed etc)
Attached is the installer output (last few lines)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13529
Summary: wine doesn't run under a X client for windows under wine
[dogfood?]
Product: Wine
Version: 1.0-rc2
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: andriusmao(a)gmail.com
I was doing some tests and kde runs properly under a X client for windows (such
as Xming and WinaXe) under wine. But wine starts debugger when trying to run
any windows program (such as these provided by WinaXe or such as winecfg) in
"remote" display.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11412
Summary: Photoshop CS2: Strange behaviour of window overlays
Product: Wine
Version: CVS/GIT
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: pascal.duersteler(a)gmail.com
Created an attachment (id=10543)
--> (http://bugs.winehq.org/attachment.cgi?id=10543)
Splashscreen and toolbar
Windows overlaying strange in CS2 with Wine 0.9.54, see Screenshots for
details. Examples for two cases as attachments.
Splashscreen overlays every other application like terminal, firefox, ...(funky
background is from photoshop main window)
The toolbar on the left side is from Photoshop CS2 which is opened fullscreen
but overlayed by ImageReady CS2 » Photoshop toolbar overlays everything other
Also when working with more than one image, clicking on another image window in
photoshop sets it between otehr windows instead of setting it into foreground
which is very annoying
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18257
Summary: Quicktime 2 video problems
Product: Wine
Version: 1.1.20
Platform: PC
URL: http://www.oldversion.com/download/quicktime212.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kennybobs(a)o2.co.uk
Videos in Quicktime 2 (32-bit) play for about 0.5 seconds and stop. Cycling
through the video draws the images but it refuses to play the whole video.
Don't know what traces would help here.
Tested with latest gitwine too, same problem.
wine-1.1.20-36-gdc31d87
Quicktime 2.1.2.59
This is the entire console output:
fixme:ole:OleRegisterServer (PlayerFrameClass,0x147100,0x147104,0x400000,1):
stub!
fixme:ole:OleRegisterServerDoc (1,C:\windows\SAMPLE.MOV): stub
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11787
Summary: Set mime type for log files are text/plain
Product: WineHQ Bugzilla
Version: unspecified
Platform: Other
OS/Version: other
Status: NEW
Severity: minor
Priority: P2
Component: bugzilla-unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: thestig(a)google.com
Right now whenever someone attaches a .log file, Bugzilla auto-detects the mime
type as text/x-log. Many web browsers are set to download files with that mime
type, rather than just opening the file in the web browser. This is rather
annoying.
Can we change the mime types for .log files to text/plain instead? I believe
the code is in Bugzilla/Attachment.pm.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19277
Summary: Internet Explorer 2.0 (Win95) fails to install
Product: Wine
Version: 1.0.1
Platform: PC
URL: http://www.oldversion.com/download/msie20.exe
OS/Version: Linux
Status: NEW
Keywords: download, Installer, win16
Severity: minor
Priority: P3
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kennybobs(a)o2.co.uk
Internet Explorer 2.0 for Windows 95 fails to install with an INST32.DLL error:
"ThunkConnect32 Failure!!"
This is followed by a second dialog stating:
"A required DLL or function entry point in a required DLL is missing."
The entire console output is:
err:thunk:_loadthunk (INST16.DLL, instthk_ThunkData16, INST32.DLL): Unable to
load 'INST16.DLL', error 2
Wine has to be set to Win95 mode to install.
Workaround is manual extraction.
Same in latest git.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18260
Summary: Quicktime 2 installer exits silently
Product: Wine
Version: 1.1.20
Platform: PC
URL: http://www.oldversion.com/download/quicktime212.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kennybobs(a)o2.co.uk
Created an attachment (id=20783)
--> (http://bugs.winehq.org/attachment.cgi?id=20783)
Wine 1.1.20 +relay +seh +tid (last 3MB)
Installer from Quicktime 2.1.2 exits silently.
Apparently the only available version is from oldversion.com
However, I also have a copy that comes with another app that installs fine. It
*might* have something to do with the lzexpand DLLs.
Failing version prints these lines and then exits:
trace:loaddll:NE_FreeModule Unloaded module "LZEXPAND.DLL" : builtin
trace:loaddll:free_modref Unloaded module
L"C:\\windows\\system32\\lzexpand.dll16" : builtin
trace:loaddll:free_modref Unloaded module L"C:\\windows\\system32\\lz32.dll" :
builtin
Whereas the working version prints this line and continues:
trace:loaddll:free_modref Unloaded module L"C:\\windows\\system32\\lz32.dll" :
builtin
I can upload the working version too if needed.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10941
Summary: Wine does not print in a newly allocated console window
Product: Wine
Version: 0.9.52.
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: wine-console
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mail2benny(a)gmail.com
Created an attachment (id=9867)
--> (http://bugs.winehq.org/attachment.cgi?id=9867)
The binary which recreates the bug
Wine does not print in a newly allocated console window using the function
FreeConsole(); and AllocConsole();
I've written a program which recreates the bug. I'll post the binary and the
source.
(compiled on Dev-C++ 4.9.9.2, in Wine)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9333
Summary: WM_LBUTTONDOWN message is not generated reliably
Product: Wine
Version: 0.9.42.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: wine-winelib
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ecentanni(a)lsijax.com
using wine-devel rpm package for Red Hat Enterprise Client Ver 5. Version
0.9.42. Release 1.el5. Source rpm is wine-0.9.42-1.el5.src.rpm
When clicking on the main window of the application the WM_LBUTTONDOWN message
is not generated reliably. If I change focus to another application and then
back to the subject program I may get one or two WM_LBUTTONDOWN message and
then no more.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19371
Summary: BCArchive: encoutners unknown toolbar style
Product: Wine
Version: 1.1.26
Platform: PC
URL: http://www.jetico.com/encryption-bcarchive/
OS/Version: Linux
Status: NEW
Keywords: download
Severity: enhancement
Priority: P2
Component: comctl32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
CC: bunglehead(a)gmail.com
fixme:toolbar:TOOLBAR_SetExtendedStyle Unknown Toolbar Extended Style
0x00000020. Please report.
Native comctl32 'fixes' it. There's not major visual flaw afaict, but the fixme
does say to report it ;-).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15741
Summary: Emule: Configuration asistant window is not repainted
correctly
Product: Wine
Version: 1.1.6
Platform: Other
URL: http://www.emule-project.net
OS/Version: other
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jaimerave(a)gmail.com
Created an attachment (id=16836)
--> (http://bugs.winehq.org/attachment.cgi?id=16836)
Screenshot in WinXP
The first time you run eMule, a configuration window will appear and after you
pass to the second step, the background of the first window will still remain
in the back. Check the screenshots.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15743
Summary: eMule: Misplaced info in the widgets
Product: Wine
Version: 0.9.16.
Platform: PC
URL: http://www.emule-project.net
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jaimerave(a)gmail.com
Created an attachment (id=16841)
--> (http://bugs.winehq.org/attachment.cgi?id=16841)
Screenshot in WinXP
Looks like the info in the tabs is around 1 o 2 pixels lower than they should.
Check the screenshots.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12123
Summary: Wall Street Advisor 1.27 redraw problems
Product: Wine
Version: CVS/GIT
Platform: Other
URL: http://www.lathuy.com/
OS/Version: other
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
Now that bug 7430 is fixed, on to runtime problems.
To install this app, first to
sh winetricks vcrun6 wsh56
Start the app. You'll see a tree control on the left
whose root node flashes constantly. Also, the main
pane doesn't redraw properly when you drag some
unrelated window in front of it.
(Also, the app outputs
err:ole:CoGetClassObject class {6c736db1-bd94-11d0-8a23-00aa00b58e10} not
registered
on startup. I think that's associated with ado15, but
doing winetricks art2kmin doesn't seem to help that...? ADO has
always been a mystery to me. But that's a different bug.)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19410
Summary: Personal Stock Monitor: tooltip text not visible
Product: Wine
Version: 1.1.26
Platform: PC-x86-64
URL: http://www.personalstockmonitor.com/downloads.html
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: comctl32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: Andrew.Talbot(a)talbotville.com
In Personal Stock Monitor (see URL for download), if one hovers over a
truncated entry a tooltip pops up, but there is no visible text on it.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15988
Summary: ActiveSync 4.5 the scroll of panel in installation don't
working
Product: Wine
Version: 1.1.8
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: shakaran(a)gmail.com
Created an attachment (id=17178)
--> (http://bugs.winehq.org/attachment.cgi?id=17178)
Panel of installation
When you install ActiveSync 4.5 in the step of change path installation, the
box below with information as unit volumen (C:,D:,etc), total size, free space,
etc dont working. The scroll and the columns size don't move.
The image is attached (sorry the image letter are Spanish).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10051
Summary: Parallax SX Key IDE cannot detect serial port under WINE
Product: Wine
Version: 0.9.46.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: wine-setupapi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ultimatedevr(a)yahoo.com
Created an attachment (id=8599)
--> (http://bugs.winehq.org/attachment.cgi?id=8599)
Result of running SXKey.exe in wine with the +setupapi debug flag.
I am trying to run the Parallax SX Key IDE through WINE, however the IDE does
not detect any of my serial ports. I have symlinked them to ~/.wine/dosdevices/
and added them to my registry, however the IDE still cannot detect my serial
ports.
I am currently running WINE v.0.9.46 (the same problem exists in the CVS
version as well).
(BTW, I have heard of others getting this to work, yet others who couldn't:
http://forums.parallax.com/forums/default.aspx?f=15&m=217429&g=221692)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13159
Summary: tooltips won't show up on partly hidden items
Product: Wine
Version: 1.0-rc1
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: comctl32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: tarasov.igor(a)gmail.com
To see the bug, open regedit drag the bar that separates registry tree from
values so that it partly covers registry branches names. If you use native
comctl32.dll or in windows you'll see tooltips over these partly covered items,
displaying full item name. Wine won't show anything.
This is true with listview also.
In some applications that have big listview tables with long values this bug
becomes pretty annoying (when you constantly have to change comlumn widths etc
in order to see complete values).
Maybe this bug was reported earlier, but I have not found it.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11461
Summary: TortoiseSVN does not run under Wine
Product: Wine
Version: 0.9.5.
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wineserver
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mslinn(a)mslinn.com
I note that Winscp (winscp.org) is able to display TortoiseSVN menus in the
local file window when running under Windows, but not when running under wine.
Here is how I invoke winscp under wine:
WINEDEBUG=fixme-all wine "c:/program files/winscp/winscp"
Background:
WinSCP is a very nice GUI front end for Subversion (svn). You can read about
it and download it here: http://tortoisesvn.tigris.org/
TortoiseSVN should not be run across a network when the Icon Overlays feature
is enabled.
http://tortoisesvn.net/node/138http://tortoisesvn.net/node/267
However, TortoiseSVN's icon overlay feature is one of the program's major
assets.
I want to use Cygwin's xterm to connect to the samba server that holds the svn
checkout directory and use Wine to run TortoiseSVN locally on that server. The
user would be presented with a nice visual representation of the state of their
checked out Subversion project, and performance would be good.
On Windows, TortoiseSVN can display its icons in any file chooser window, and
in Windows Explorer. I have also found that WinSCP's explorer view will show
icons for the local machine.
I would prefer not to have to run WinSCP in order to view TortoiseSVN icons.
Perhaps a tiny Win32 program that merely shows a file dialog would be
sufficient to run in an xterm, if Wine would support whatever system calls
TortoiseSVN makes.
For me, and many other programmers and IT personnel who work in a mixed
Windows/Linux environment, Wine would be much more useful if there was a way to
run it under Wine. Might it be possible to extend winefile with whatever it
currently lacks in order to allow TortoiseSVN to run?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17124
Summary: MSYS installer doesn't pop up cmd window?
Product: Wine
Version: 1.1.13
Platform: Other
URL: http://www.mingw.org/wiki/msys
OS/Version: other
Status: NEW
Keywords: download, Installer, source
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
When install msys, it floods the terminal with:
This is a post install process that will try to normalize betweenyour MinGW
install if any as well as your previous MSYS installs if any. I don't have any
traps as aborts will not hurt anything.Do you wish to continue with the post
install? [yn ] pi.sh: [: ==: unary operator expectedDo you have MinGW
installed? [yn ] pi.sh: [: ==: unary operator expectedWhen you install MinGW I
suggest you install it to C:/mingw(replace C: with the drive of your choice).
Then create an/etc/fstab file with a line that has a value similar to:C:/mingw
/mingwPress ENTER to continue Normalizing your MSYS environment.You
have script /bin/awkYou have script /bin/cmdYou have script /bin/echoYou have
script /bin/egrepYou have script /bin/exYou have script /bin/fgrepYou have
script /bin/printfYou have script /bin/pwdYou have script /bin/rviYou have
script /bin/rviewYou have script /bin/rvimYou have script /bin/viYou have
script /bin/viewMinGW-1.1 has a version of make.exe within it's bin/
directory.Please be sure to rename this file to mingw32-make.exe once youve
echo installed MinGW-1.1 because it\s very deficient in function.Press ENTER to
continue.C:\msys\1.0\postinstall>pause
Press Return key to continue:
Towards the end. It looks like something that should be in a cmd prompt
(haven't tested on windows yet). The line endings are also wrong, but that's
another bug.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15949
Summary: MSYS does not integrate with MinGW install correctly
Product: Wine
Version: 1.1.8
Platform: Other
OS/Version: other
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jeffz(a)jeffz.name
Installing MSYS after MinGW on windows sets things up so that the existing
MinGW install integrates with MSYS, whereby /mingw from the MSYS shell points
to the MinGW install.
First download:
wget
http://downloads.sourceforge.net/mingw/MinGW-5.1.4.exe?modtime=1209244789&b…
run MinGW-5.1.4.exe with all defaults.
Second download:
wget
http://downloads.sourceforge.net/mingw/MSYS-1.0.10.exe?modtime=1079444447&b…
run wineconsole cmd (required because Wine doesn't launch a console window like
windows does)
MSYS-1.0.10.exe
Answer the defaults to the prompted questions on the console window before the
installer finishes (it pauses there)
wine cmd /c c:\msys\1.0\msys.bat
Typing 'gcc' in the msys terminal echos "sh: gcc: command not found", whereas
on windows it says gcc.exe: no input files.
On windows within msys, `ls /mingw` lists the contents of C:\mingw, on Wine
/mingw is empty.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.