http://bugs.winehq.org/show_bug.cgi?id=21424
Summary: Cygwin 1.7.1 bash crashes
Product: Wine
Version: 1.1.36
Platform: x86
OS/Version: Linux
Status: NEW
Keywords: download, source
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
cygwin installs now, but one sees the following crash
10 [main] bash 9 _cygtls::handle_exceptions: Exception:
STATUS_ACCESS_VIOLATION
1271 [main] bash 9 open_stackdumpfile: Dumping stack trace to
bash.exe.stackdump
err:ntdll:RtlpWaitForCriticalSection section 0x736d2784 "loader.c:
loader_section" wait timed out in thread 0036, blocked by 003c, retrying (60
sec)
during postinstall, and also when running bash interactively.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19713
Summary: Some serial port communication functions behave
differently in Wine and Windows.
Product: Wine
Version: 1.1.27
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: kernel32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fenixk19(a)mail.ru
Created an attachment (id=23025)
--> (http://bugs.winehq.org/attachment.cgi?id=23025)
Test program
This makes test program to hang in Wine, but in MS it is ok. Test program
attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13296
Summary: regression problem in upgrade to Ubuntu Hardy/1.0-rc1:
Palm Hotsync over serial Segmentation Fault
Product: Wine
Version: 1.0-rc1
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jan-winehq(a)h-i-s.nl
Created an attachment (id=13150)
--> (http://bugs.winehq.org/attachment.cgi?id=13150)
Logging output
I upgraded to Ubuntu Hardy, and wine 1.0-rc1.
Hotsync manager 1.0 for Palm Pilot worked fine before.
http://appdb.winehq.org/objectManager.php?sClass=version&iId=10362
Now it crashes half-way synchronising over the serial port, sometimes after a
few seconds, sometimes much later in the process.
These crashes reproduce well, and yield a segmentation fault without further
information
$ wine hotsync.exe
Segmentation fault
$
I do not know if this means that a part of Wine crashes, or just the
application.
I added logging, where it seems that the problem lies within the call below:
0009:CallTo16(func=111f:072a,ds=1087,118f,7404,0000,0006) ss:sp=1087:ffd0
I am not sure if the problem lies with wine, or that other problems with Ubuntu
Hardy may relate to this.
It is disappointing that an application that used to work fine, and I came to
depend on, is now broken.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10051
Summary: Parallax SX Key IDE cannot detect serial port under WINE
Product: Wine
Version: 0.9.46.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: wine-setupapi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ultimatedevr(a)yahoo.com
Created an attachment (id=8599)
--> (http://bugs.winehq.org/attachment.cgi?id=8599)
Result of running SXKey.exe in wine with the +setupapi debug flag.
I am trying to run the Parallax SX Key IDE through WINE, however the IDE does
not detect any of my serial ports. I have symlinked them to ~/.wine/dosdevices/
and added them to my registry, however the IDE still cannot detect my serial
ports.
I am currently running WINE v.0.9.46 (the same problem exists in the CVS
version as well).
(BTW, I have heard of others getting this to work, yet others who couldn't:
http://forums.parallax.com/forums/default.aspx?f=15&m=217429&g=221692)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=9378
Summary: CM: Shock Force 'Could not initialize graphics display'
Product: Wine
Version: 0.9.43.
Platform: PC
URL: http://www.battlefront.com/products/cmsf/downloads.html
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: wine-directx
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: mailing_list(a)orange.nl
After starting Combat Mission: Shock Force Demo it stops with the message:
'Could not initialize graphics display. REQUIRED 1024x768, 32-bit
color'.
The terminal output doesn't provide any clues:
wine 'CM Shock Force DEMO.exe'
ALSA lib conf.c:3939:(snd_config_expand) Unknown parameters 0
ALSA lib control.c:910:(snd_ctl_open_noupdate) Invalid CTL default:0
err:alsa:ALSA_CheckSetVolume Could not find 'PCM Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find 'PCM Playback Volume' element
fixme:wave:ALSA_AddCaptureDevice Add support for DSCapture
ALSA lib seq_hw.c:457:(snd_seq_hw_open) open /dev/snd/seq failed: No such file
or directory
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18889
Summary: Live Messenger 2008 fails to load - possible actctx
problem
Product: Wine
Version: 1.1.16
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: andras(a)csevego.net
Created an attachment (id=21730)
--> (http://bugs.winehq.org/attachment.cgi?id=21730)
+actctx,+relay log
Starting of installed (on windows) Msn 2009 wil result:
err:module:import_dll Library MSVCR80.dll (which is needed by
L"Z:\\media\\disk\\Program Files\\Windows Live\\Messenger\\msnmsgr.exe") not
found
err:module:LdrInitializeThunk Main exe initialization for
L"Z:\\media\\disk\\Program Files\\Windows Live\\Messenger\\msnmsgr.exe" failed,
status c0000135
Same load failure, when I manually install with wine (from msi packages)
MSVCRT 8.0 is installed, as shown attached +actctx,+relay log
I suspect here an Activation Context failure.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11436
Summary: Pepakura viewer: err:wgl:X11DRV_wglShareLists Could not
share display lists, context already created !
Product: Wine
Version: CVS/GIT
Platform: PC
URL: http://www.tamasoft.co.jp/pepakura-
en/download/viewer.html
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: x11-driver
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fabio.capela(a)yahoo.com
Created an attachment (id=10567)
--> (http://bugs.winehq.org/attachment.cgi?id=10567)
Trace until the error.
I'm trying to run the Pepakura viewer, but it's giving an strange error on
startup (error: no error) and is having some graphical glitches, as well as
being extremely slow.
The grafical glitches are a flickering 3D model and no textures on the 2D
model.
The bug seems to be the same one affecting Pepakura Designer 2.
The console shows an error with X11DRV_wglShareLists
(err:wgl:X11DRV_wglShareLists Could not share display lists, context already
created !). I've attached a wgl trace up to the moment the error dialog
appears. Seems like the workaround to handle the different way to share OpenGL
contexts in Windows and Linux can't handle this specific software.
The software is freeware and can be downloaded from
http://www.tamasoft.co.jp/pepakura-en/download/viewer.html
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18260
Summary: Quicktime 2 installer exits silently
Product: Wine
Version: 1.1.20
Platform: PC
URL: http://www.oldversion.com/download/quicktime212.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kennybobs(a)o2.co.uk
Created an attachment (id=20783)
--> (http://bugs.winehq.org/attachment.cgi?id=20783)
Wine 1.1.20 +relay +seh +tid (last 3MB)
Installer from Quicktime 2.1.2 exits silently.
Apparently the only available version is from oldversion.com
However, I also have a copy that comes with another app that installs fine. It
*might* have something to do with the lzexpand DLLs.
Failing version prints these lines and then exits:
trace:loaddll:NE_FreeModule Unloaded module "LZEXPAND.DLL" : builtin
trace:loaddll:free_modref Unloaded module
L"C:\\windows\\system32\\lzexpand.dll16" : builtin
trace:loaddll:free_modref Unloaded module L"C:\\windows\\system32\\lz32.dll" :
builtin
Whereas the working version prints this line and continues:
trace:loaddll:free_modref Unloaded module L"C:\\windows\\system32\\lz32.dll" :
builtin
I can upload the working version too if needed.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15255
Summary: ntdll: The memory overview Page in Google Chrome is
incomplete (MemoryWorkingSetList for
NtQueryVirtualMemory)
Product: Wine
Version: CVS/GIT
Platform: PC
URL: http://chrome.google.com
OS/Version: Linux
Status: NEW
Keywords: download, source
Severity: normal
Priority: P3
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wine.dev(a)web.de
Created an attachment (id=16041)
--> (http://bugs.winehq.org/attachment.cgi?id=16041)
about:memory
Display the Memory status Page with "about:memory"
The Virtual Memory status is displayed (Private and Mapped),
but the Resident memory size is 0 (Private, Shared and Total)
0019:fixme:virtual:NtQueryVirtualMemory (process=0xffffffff,addr=(nil))
Unimplemented information class: MemoryWorkingSetList
0019:fixme:virtual:NtQueryVirtualMemory (process=0x108,addr=(nil))
Unimplemented information class: MemoryWorkingSetList
--
By by ... Detlef
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.