http://bugs.winehq.org/show_bug.cgi?id=13819
Summary: Wrong codepage used for console output
Product: Wine
Version: CVS/GIT
Platform: Other
OS/Version: other
Status: NEW
Severity: normal
Priority: P2
Component: kernel32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fgouget(a)codeweavers.com
To reproduce this problem, run the following command (that's assuming you have
a UTF-8 xterm, otherwise replace UTF-8 with ISO-8859-1 or the appropriate
encoding):
LANG=fr_FR.UTF-8 ./programs/start/start /help
You will notice that all the accentuated characters are missing. This is
because start.c converts the Unicode resource string to the
GetConsoleOutputCP() encoding in the output() function. I think that's correct
but GetConsoleOutputCP() systematically return "850" as the codepage, even if I
change the [Nls\Codepage]/OEM value in the registry.
One hack to fix this is to replace the GetConsoleOutputCP() call with CP_UNIXCP
but I guess that would be wrong in the case where we're running in the Wine
console.
So I think that when the console is a regular Unix terminal
GetConsoleOutputCP() should return the CP_UNIXCP codepage.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19107
Summary: Overlod 2 - Game Crashes
Product: Wine
Version: unspecified
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hallvar_helle(a)damedoen.com
When Running Ovelord2.exe the game chrashes. Wine Chrash window stays hidden
buts shows when alt-tabbing
attatched Console output for >wine Overlord2.exe
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16565
Summary: Tarzan Demo: Crashes while starting.
Product: Wine
Version: 1.1.10
Platform: PC-x86-64
URL: http://www.download.com/Tarzan-demo/3000-7563_4-
10032563.html
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: flossl(a)live.com
Tarzan crashes while starting with an error code.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=15785
Summary: Serious Sam II(v 2.066): 3d graphics don't work and
movies don't play.
Product: Wine
Version: 1.1.7
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dsxbox(a)gmail.com
Created an attachment (id=16902)
--> (http://bugs.winehq.org/attachment.cgi?id=16902)
error log
I can start application and enter menu, but when I try to start playing, only
black screen is shown. There are message "Video card was changed. Select
"quality auto adjustment" in settings menu", but when I do it, application
hungs.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=20139
Summary: Fritz 11 crash when using 3D chessboard
Product: Wine
Version: 1.1.29
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: drakkk(a)centrum.cz
Created an attachment (id=23720)
--> (http://bugs.winehq.org/attachment.cgi?id=23720)
terminal output
Fritz 11 is working with 2D chessboard but when selecting 3D, game crash with:
wine: Unimplemented function d3dx9_36.dll.D3DXCreateTextureFromFileExA called
at address 0x7b844633 (thread 001b), starting debugger..
Using winetricks d3dx9 doesn't help (in fact it makes it even worse, instead of
only aplication crash I get a serious xserver crash.)
Only change to default settings was disabling anti aliasing (in order to evade
bug 18333)
My system: Ubuntu 8.10, Radeon X1600 mobile, fglrx driver version: 8.593.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18650
Summary: FFXI - POL screen flipping potential-fix causes crash
Product: Wine
Version: 1.1.21
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dereck(a)gmail.com
Created an attachment (id=21363)
--> (http://bugs.winehq.org/attachment.cgi?id=21363)
Terminal output from crash.
I installed Final Fantasy XI as per the appdb instructions and it worked as
well as it could, but like every other system I installed on POL would flip
upside down constantly. In the comments there is a posted solution of sorts to
the fliping:
adding the following key with regedit fixes this problem:
[HKEY_CURRENT_USER\Software\Wine\Direct3D]
"OffscreenRenderingMode"="fbo"
If I add this key, POL crashes before it can load, terminal output attached.
Graphics card Info:
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress
200M]
Subsystem: Toshiba America Info Systems Device ff04
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at c0000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0020000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Kernel modules: radeonfb
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17828
Summary: AnzioWin: 2 taskbar entries for each running instance
Product: Wine
Version: 1.1.17
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: giulioo(a)gmail.com
System:
Ubuntu 8.04
Wine 1.1.17 (binary from WineHQ APT Repository)
I'm using an app which when launched will show 2 taskbar entries (2 rectangular
things on the taskbar) for every instance running, instead of just 1.
This is a problem because only 1 of those is active and responds to clicks to
get focus / come in the foreground, so the user is confused, especially if he
has more than one instance running (ie: 2 instances = 4 taskbar entries).
Steps to reproduce:
1) Download and install (9MB)
http://www.anzio.com/pub/anzio16/anziowinsetup.exe
(30 days demo, 15 seconds nag screen at every launch)
2) Click on the new menu icon
programs -> Anzio 16 -> Anzio 16 (default connection)
3) Select vt220
4) wait 15 seconds at nag screen
5) Select telnet/ssh whatever and type an IP address in the upper right text
box (ie: the very same Linux box you are testing on) and press "connect".
6) Observe that in the taskbar you have 2 entries
1st "Anzio"
2nd "AnzioWin <ip.address.you.used>"
If you minimize the window, only one of those entries is active.
On Windows you only get 1 taskbar entry.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18360
Summary: Implement ntoskrnl.exe.MmMapIoSpace
Product: Wine
Version: 1.0.1
Platform: Other
OS/Version: other
Status: NEW
Severity: enhancement
Priority: P2
Component: ntoskrnl
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: scott(a)open-vote.org
>From launchpad: https://bugs.edge.launchpad.net/ubuntu/+source/wine/+bug/314498
Lack of this function is causing an application crash, although I'm not sure
the application would work with the function either.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=17764
Summary: Cannot use "Edit in Edit image window" in Canon DPP
Product: Wine
Version: 1.1.15
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: theholyettlz(a)googlemail.com
Created an attachment (id=19986)
--> (http://bugs.winehq.org/attachment.cgi?id=19986)
Backtrace
On Canon DPP 3.5.1 (and prior versions, I believe it started with a Wine update
although I cannot remember which), using "Edit in Edit image window" in
DPPViewer.exe (select one or more images, click View, Edit in Edit image
window) results in the main window disappearing. DPPEditor.exe is started (as
it should be, this produced the Edit image window) but for some reason is not
displayed. Killing it results in the reappearance of the DPPViewer.exe window.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.