wine-bugs February 2010

wine-bugs@winehq.org

1 participants
6507 discussions

[Bug 14132] New: Incorrect Font Displayed After Install
by wine-bugs＠winehq.org 24 Jan '21

24 Jan '21

http://bugs.winehq.org/show_bug.cgi?id=14132 Summary: Incorrect Font Displayed After Install Product: Wine Version: 1.0.0 Platform: PC URL: see Description OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: gdi32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: pbronline-wine(a)yahoo.co.uk Occurs with Corel WordPerfect Office X3 and WordPerfect Office 12. Start installer. Note font (print snapshot or whatever). Install application, Quit installer. Start installer again. Font displayed is different. With WordPerfect Office X3, the effect is obvious as the 'wrong' font is a symbol font. With WordPerfect Office 12, the 'wrong' font is very narrow (I think this may have previsouly been reported as <<poor rendering>>). Problem affects not just the installers but also service packs and the applications themselves (particularly Presentations). I would expect it affects all installed applications. To confirm the problem ... 1. remove all references to Corel installed fonts from system.reg which ever way you choose but the following works: cd .wine mv system.reg system.reg~ sed -e '/TrueType.*C:.*\.TTF/d' -e '/TrueType.*C:.*\.ttf/d' system.reg~ > system.reg 2. move Corel installed fonts to one side for a moment: mv drive_c/windows/Fonts drive_c/windows/Fonts.wpo mkdir drive_c/windows/Fonts 3. Start installer. Font is back to what is was before installation. Quit installer. 3. Put back a bad font: cp -p drive_c/windows/Fonts.wpo/WPCO03N_.TTF drive_c/windows/Fonts 4. Start installer. Symbol font makes screen indecypherable. 5. Try other fonts. Not all override the 'good' font. MTEXTRA.TTF and WPHV04N_.TTF do. Downloads ? WordPerfect Office X3: http://www.corel.com/servlet/Satellite?pagename=uk/ProcessLayout&lc=en&ppg=… Professional (aka not Trial) Edition is 'fun' to install. See bug 14106. WordPerfect Office 12: Not available for download anymore as far as I can tell. Perhaps one of the nice people who contributed to bug 2547 can help. Standard (aka not Trial) Edition installs nicely under Wine 1.0. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 10

[Bug 11081] New: Windows Genuine Advantage Tool crashes on launch
by wine-bugs＠winehq.org 24 Jan '21

24 Jan '21

http://bugs.winehq.org/show_bug.cgi?id=11081 Summary: Windows Genuine Advantage Tool crashes on launch Product: Wine Version: 0.9.52. Platform: Other URL: http://www.microsoft.com/genuine/downloads/Validate.aspx ?displaylang=en&sGuid=68d69b53-5057-4179-b72b- dfb1e12854f2 OS/Version: other Status: NEW Keywords: download, Installer Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: austinenglish(a)gmail.com Created an attachment (id=10101) --> (http://bugs.winehq.org/attachment.cgi?id=10101) Terminal output in wine 0.9.52 Windows Genuine Advantage Tool crashes on launch. While obviously not a very important program to us, it should still run (and fail validation). Backtrace attached. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes.

2 4

[Bug 17342] New: Adobe acrobat 5 crash after a splash screen
by wine-bugs＠winehq.org 24 Jan '21

24 Jan '21

http://bugs.winehq.org/show_bug.cgi?id=17342 Summary: Adobe acrobat 5 crash after a splash screen Product: Wine Version: 1.1.14 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: last_deceneu(a)yahoo.com Created an attachment (id=19377) --> (http://bugs.winehq.org/attachment.cgi?id=19377) crash log of acrobat 5 Acrobat is the only reason that I use wine. I seen that only version 5 of acrobat is working on wine. Currently I updated my suse linux from 11.0 to 11.1. On suse 11.1 I installed wine 1.1.14 and it crashed after displaying a splash screen, it krash also with 1.1.9. On previous version of suse 11.0 I used wine 0.9 and worked fine. I installed acrobat in a clean wine and with winetricks I installed mfc42 and vcrun2008. Please give some instructions how to make it work. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 16

[Bug 20165] New: Ikea Home Planner 2010 crashes or hangs X.
by wine-bugs＠winehq.org 24 Jan '21

24 Jan '21

http://bugs.winehq.org/show_bug.cgi?id=20165 Summary: Ikea Home Planner 2010 crashes or hangs X. Product: Wine Version: 1.1.29 Platform: PC-x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: tshoulihane(a)hotmail.com Created an attachment (id=23764) --> (http://bugs.winehq.org/attachment.cgi?id=23764) Crash log 2010 (2.0.3) version of Ikea home planner. Installs OK, but on adding an itme to the room layout (for example a door), wine crashes. If run from the programs menu, X locks up and needs to be restarted. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 7

[Bug 13925] New: Ikea home planer 2D and 3D graphical views show only garbage
by wine-bugs＠winehq.org 24 Jan '21

24 Jan '21

http://bugs.winehq.org/show_bug.cgi?id=13925 Summary: Ikea home planer 2D and 3D graphical views show only garbage Product: Wine Version: 1.0-rc4 Platform: PC URL: http://www.ikea.com/ms/de_DE/rooms_ideas/splashplanners. html OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: wine(a)zorglub.s.bawue.de Created an attachment (id=14043) --> (http://bugs.winehq.org/attachment.cgi?id=14043) section of .xsession-errors while IPH was running. Hello, the actual version of Wine is 1.0-rc5 but it's not listed yet. This bug is related to test http://appdb.winehq.org/objectManager.php?sClass=version&iId=11720&iTesting… There is not much to add to what I've written there actually, so copy&paste: Application installs and starts, but all graphical views are completely garbled (2D and 3D, like a TV without channel), the menus and icons seem to work and do something but I can't see anything. # Graphical configuration Section "Device" Identifier "Intel Corporation 82Q963/Q965 Integrated Graphics Controller" Driver "intel" BusID "PCI:0:2:0" EndSection # glxinfo [...] direct rendering: Yes [...] OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) 965Q 4.1.3002 x86/MMX/SSE2 OpenGL version string: 1.4 Mesa 7.0.3-rc2 [...] I also attach my .xsession-errors (the part related to when the Ikea program was running. Let me know if you need more. Thanks, Eric -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 22

[Bug 21402] New: Microsoft GIF Animator fails to install correctly
by wine-bugs＠winehq.org 24 Jan '21

24 Jan '21

http://bugs.winehq.org/show_bug.cgi?id=21402 Summary: Microsoft GIF Animator fails to install correctly Product: Wine Version: 1.1.36 Platform: x86-64 URL: http://download.cnet.com/Microsoft-GIF-Animator/3000-1 8512_4-12053.html OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: RandomAccountName(a)mail.com Created an attachment (id=25771) --> (http://bugs.winehq.org/attachment.cgi?id=25771) Terminal output Microsoft GIF Animator's setup program seems to run smoothly at first, but after clicking the "complete install" button, it won't finish the installation. It produces a message which simply says "Microsoft GIF Animator setup did not complete successfully." -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 14

[Bug 16882] New: WMI core 1.5 installation hangs (needed for .NET 3.0 installer, WCF part), SECURITY_SERVICE_RID missing from service token group
by wine-bugs＠winehq.org 22 Jan '21

22 Jan '21

http://bugs.winehq.org/show_bug.cgi?id=16882 Summary: WMI core 1.5 installation hangs (needed for .NET 3.0 installer, WCF part), SECURITY_SERVICE_RID missing from service token group Product: Wine Version: 1.1.12 Platform: Other URL: http://www.microsoft.com/downloads/details.aspx?familyid =AFE41F46-E213-4CBF-9C5B-FBF236E0E875 OS/Version: other Status: UNCONFIRMED Severity: normal Priority: P2 Component: advapi32 AssignedTo: wine-bugs(a)winehq.org ReportedBy: focht(a)gmx.net Hello, after getting past bug 16879 one encounters this one. ---- Prerequisite: 1. clean WINEPREFIX 2. sh winetricks -q dotnet20 3. download .NET 3.0 Framework installer from: http://download.microsoft.com /download/4/d/a/4da3a5fa-ee6a-42b8-8bfa-ea5c4a458a7d/dotnetfx3setup.exe (sha1sum: a566bcd2ffffc3842a95adc57f7df3f8cd11577f) 4. export _SFX_CAB_SHUTDOWN_REQUEST=1 (workaround, see bug 9158) 5. wine ./dotnetfx3setup.exe It might take a while until all required packages are downloaded using BITS. Note: If you need to redo steps, backup the directory "dotnetfx304506.30" from "c:\\windows\\temp" to a different location, remove ~/.wine, copy "dotnetfx304506.30" again to "c:\\windows\\temp" to prevent BITS from downloading over and over again. ---- "c:\\windows\\temp\\dd_dotnetfx3error.txt": --- snip --- [01/11/09,12:50:20] Windows Communication Foundation: [2] Error: Installation failed for component Windows Communication Foundation. MSI returned error code 1603 [01/11/09,12:50:31] WapUI: [2] DepCheck indicates Windows Communication Foundation is not installed. [01/11/09,12:50:31] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 was not attempted to be installed. --- snip --- "c:\\windows\\temp\\dd_wcf_retMSI597F.txt": --- snip --- 1: C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe /r /x /y /v 2: 1: ERROR: Process returned non-0 value! CMDLINE: C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe /r /x /y /v 2: 1: Failed 2: --- snip --- and "c:\\windows\\temp\\dd_wcf_retCA69A1.txt": --- snip --- === Verbose logging started: 1/11/2009 12:50:17 Calling process: C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe === ServiceModelReg [12:50:18:302]: Warning: Could not detect IIS installation or IIS is disabled, skipping the Web Host Script Mappings component since it depends upon IIS to function properly. If you believe this message is an error, check your IIS installation to make sure it is installed properly. ServiceModelReg [12:50:18:329]: Information: The ServiceModelReg tool will take the following actions: Reinstalling configuration section system.serviceModel to C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. Reinstalling configuration section system.runtime.serialization to C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. Reinstalling configuration section system.serviceModel.activation to C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. Adding configuration entry for BuildProvider: System.ServiceModel.Activation.ServiceBuildProvider, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 Reinstalling compilation assembly node to System.Web section group: System.Runtime.Serialization, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL Reinstalling compilation assembly node to System.Web section group: System.IdentityModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitectur... ServiceModelReg [12:50:18:358]: Uninstalling: Machine.config Section Groups and Handlers ServiceModelReg [12:50:18:366]: Warning: Configuration section system.serviceModel does not exist in C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. ServiceModelReg [12:50:18:369]: Warning: Configuration section system.runtime.serialization does not exist in C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. ServiceModelReg [12:50:18:373]: Warning: Configuration section system.serviceModel.activation does not exist in C:\windows\Microsoft.NET\Framework\v2.0.50727\Config\machine.config. ServiceModelReg [12:50:18:374]: Installing: Machine.config Section Groups and Handlers ServiceModelReg [12:50:18:893]: Uninstalling: System.Web Build Provider ServiceModelReg [12:50:19:095]: Warning: A configuration entry for BuildProvider System.ServiceModel.Activation.ServiceBuildProvider, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 does not exist. ServiceModelReg [12:50:19:096]: Installing: System.Web Build Provider ServiceModelReg [12:50:19:138]: Uninstalling: System.Web Compilation Assemblies ServiceModelReg [12:50:19:153]: Warning: All compilation assembly nodes do not exist in System.Web section group. ServiceModelReg [12:50:19:154]: Installing: System.Web Compilation Assemblies ServiceModelReg [12:50:19:246]: Uninstalling: HTTP Handlers ServiceModelReg [12:50:19:260]: Warning: HttpHandlers node *.svc does not exist in System.Web section group. ServiceModelReg [12:50:19:261]: Installing: HTTP Handlers ServiceModelReg [12:50:19:322]: Uninstalling: HTTP Modules ServiceModelReg [12:50:19:333]: Warning: HttpModules node ServiceModel does not exist in System.Web section group. ServiceModelReg [12:50:19:334]: Installing: HTTP Modules ServiceModelReg [12:50:19:365]: Repairing: WMI Classes ServiceModelReg [12:50:19:396]: Warning: Failure executing "C:\windows\system32\wbem\mofcomp.exe" with parameters ""C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModel.mof"": System.IO.FileNotFoundException: Could not load file or assembly 'C:\windows\system32\wbem\mofcomp.exe' or one of its dependencies. Exception from HRESULT: 0x80070002 File name: 'C:\windows\system32\wbem\mofcomp.exe' at System.ServiceModel.Install.InstallHelper.ExecuteWaitHelper(String program, String parameters) at System.ServiceModel.Install.InstallHelper.ExecuteWait(String program, String parameters, Int32[] allowedExitCodes) at System.ServiceModel.Install.WmiInstallComponent.OnInstall(OutputLevel outputLevel) ServiceModelReg [12:50:19:516]: System.InvalidCastException: Retrieving the COM class factory for component with CLSID {4590F811-1D3A-11D0-891F-00AA004B2E24} failed due to the following error: 80004002. at System.Management.ManagementScope.InitializeGuts(Object o) at System.Management.ManagementScope.Initialize() at System.Management.ManagementScope.Connect() at System.ServiceModel.Install.WmiInstallComponent.get_IsInstalled() at System.ServiceModel.Install.WmiInstallComponent.ApplyNamespaceDacl(OutputLevel outputLevel) at System.ServiceModel.Install.WmiInstallComponent.OnInstall(OutputLevel outputLevel) at System.ServiceModel.Install.WmiInstallComponent.Reinstall(OutputLevel outputLevel) at Microsoft.Tools.ServiceModel.ServiceModelReg.PerformAction(ActionItem actionItem, Nullable`1 confirmUninstall) at Microsoft.Tools.ServiceModel.ServiceModelReg.Run(String[] args) at Microsoft.Tools.ServiceModel.ServiceModelReg.TryRun(String[] args) === Verbose logging stopped: 1/11/2009 12:50:19 === --- snip --- Oh joy ... WMI. Providing fake mofcomp.exe (returning success) is not enough, WCF installer will try *use* WMI hence there needs to be some working infrastructure: --- snip --- ServiceModelReg [19:37:29:832]: Starting tool 'C:\windows\system32\wbem\mofcomp.exe' with parameters '"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModel.mof"'. ServiceModelReg [19:37:29:895]: ServiceModelReg [19:37:29:896]: ServiceModelReg [19:37:29:897]: Tool 'C:\windows\system32\wbem\mofcomp.exe' with parameters '"C:\windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModel.mof"' exited with code '0'. ServiceModelReg [19:37:29:955]: System.InvalidCastException: Retrieving the COM class factory for component with CLSID {4590F811-1D3A-11D0-891F-00AA004B2E24} failed due to the following error: 80004002. at System.Management.ManagementScope.InitializeGuts(Object o) at System.Management.ManagementScope.Initialize() at System.Management.ManagementScope.Connect() at System.ServiceModel.Install.WmiInstallComponent.get_IsInstalled() at System.ServiceModel.Install.WmiInstallComponent.ApplyNamespaceDacl(OutputLevel outputLevel) at System.ServiceModel.Install.WmiInstallComponent.OnInstall(OutputLevel outputLevel) at System.ServiceModel.Install.WmiInstallComponent.Reinstall(OutputLevel outputLevel) at Microsoft.Tools.ServiceModel.ServiceModelReg.PerformAction(ActionItem actionItem, Nullable`1 confirmUninstall) at Microsoft.Tools.ServiceModel.ServiceModelReg.Run(String[] args) at Microsoft.Tools.ServiceModel.ServiceModelReg.TryRun(String[] args) === Verbose logging stopped: 1/8/2009 19:37:29 === --- snip --- This is a big blocker and getting WMI to work with Wine is imperative for .NET 3.0 and higher. Of course this also useful for older .NET Frameworks Roll-back, prepare clean WINEPREFIX again;-) We need to install native WMI core 1.5 from: http://www.microsoft.com/downloads/details.aspx?familyid=AFE41F46-E213-4CBF… Download wmicore http://download.microsoft.com/download/platformsdk/wmicore/1.5/W9XNT4/EN-US… (sha1sum: f7a36668eb6c82a28393637ffdf0ec6e8adfa6a1) Make sure you set winver to NT 4.0 (don't forget to reset to default) and execute the installer (I already have my own winetricks step for this): --- snip --- wine wmicore.exe --- snip --- The installer will then hang at some point "Configuring repository". With winedbg one can see following processes: --- snip --- Wine-dbg>info process pid threads parent executable (all id:s are in hex) 0000000c 5 0000000a 'services.exe' 0000000f 1 0000000a 'explorer.exe' 0000001b 4 0000000c 'winedevice.exe' 00000025 1 00000000 'wmicore.exe' 00000027 2 00000025 'GLBbab.tmp' 00000022 4 0000000c 'WinMgmt.exe' --- snip --- The problem is "WinMgmt.exe" which ought to be a service but due to Wine insufficiency the service thinks it's a normal process not showing usual service process behaviour as registering control handler and the like. If you do 'wineserver -k' and try to start anything with Wine nothing will happen until wineboot times out... As quickfix, start regedit (wait until wineboot timeout) and set service start type key for "WinMgmt" to manual start, e.g. "2" -> "3". Also a kernel driver (service) that is installed with WMI "smbios" fails to load but this currently harmless. If we look now in "c:\\windows\\system32\\WBEM" we see the whole stuff installed. The logs in "logs" subdirs are not revealing much so we have to increase the log level: --- snip --- [HKEY_LOCAL_MACHINE\Software\Microsoft\WBEM\CIMOM] "Logging"="1" "Logging Directory"="C:\\windows\\system32\\WBEM\\Logs" --- snip --- LogLevel is 0 to turn off logging, a 1 to turn on logging, and a 2 for verbose logging. After that, we manually try to start the service: --- snip --- $ wine net start winmgmt err:winedevice:ServiceMain driver L"smbios" failed to load The Windows Management Instrumentation service is starting. fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),2,2,(nil),32,(nil)) - stub! fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),1,3,(nil),0,(nil)) - stub! fixme:advapi:RegisterEventSourceW (L"",L"WinMgmt"): stub wine: Call from 0x7b844f54 to unimplemented function ole32.dll.CoSwitchCallContext, aborting err:rpc:I_RpcReceive we got fault packet with status 0x80000100 fixme:ole:CoCreateInstance no instance created for interface {00000000-0000-0000-c000-000000000046} of class {8bc3f05e-d86b-11d0-a075-00c04fb68820}, hres is 0xc0000005 --- snip --- This is bug 7187 After fixing this problem, we repeat the whole stuff again to get this in logs: --- snip --- (Sun Jan 11 13:41:41 2009) : Starting WinMgmt, ProcID = 26, CmdLine = , User = focht(Sun Jan 11 13:41:41 2009) : WinMgmt bIsService = 0, return code from function determining if service = 0(Sun Jan 11 13:41:41 2009) : WinMgmt gbRunAsApp = 1(Sun Jan 11 13:41:41 2009) : Starting Initialize, ID = 26(Sun Jan 11 13:41:41 2009) : Registered class factory with flags: 0x15 (Sun Jan 11 13:41:41 2009) : RegOpenKey returned 0x2 while trying to open the transports node. Using default transports!(Sun Jan 11 13:41:41 2009) : Initialize complete(Sun Jan 11 13:41:41 2009) : WindowProc got hWnd=20026, message=24, wParam=0, lParam=33f814(Sun Jan 11 13:41:41 2009) : WindowProc got hWnd=20026, message=81, wParam=0, lParam=33fce8(Sun Jan 11 13:41:41 2009) : WindowProc got hWnd=20026, message=83, wParam=0, lParam=33f974(Sun Jan 11 13:41:41 2009) : WindowProc got hWnd=20026, message=1, wParam=0, lParam=33fce8(Sun Jan 11 13:41:41 2009) : Inside the waiting function --- snip --- "WinMgmt bIsService = 0" is the culprit. The process retrieves token information and checks if process token groups contain "SECURITY_INTERACTIVE_RID" (-> normal process) or "SECURITY_SERVICE_RID" (service process). I think it's actually services.exe that adds the SECURITY_SERVICE_RID sid to the newly created service process (token groups). This requires some infrastructure, including wineserver. I already quick-hacked a path to verify this and it works as expected, letting the service successfully start ;-) Regards -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 23

[Bug 11970] New: graphic bug with 0.9. 57 in serius sam - the second encounter
by wine-bugs＠winehq.org 16 Jan '21

16 Jan '21

http://bugs.winehq.org/show_bug.cgi?id=11970 Summary: graphic bug with 0.9.57 in serius sam - the second encounter Product: Wine Version: 0.9.57. Platform: Other OS/Version: other Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: jb.faq(a)gmx.de Created an attachment (id=11299) --> (http://bugs.winehq.org/attachment.cgi?id=11299) graphic bug: a look throug hills Hi, with the new version 0.9.57 of wine the graphic rendering in Serious Sam - The Second encounter breaks. You can look through hills, walls or the earth. I'll upload a screeshot in some few minutes, because it describe the error in the best way. Greetings Jan -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 82

[Bug 19102] New: Don`t install 3D Studio Max 9
by wine-bugs＠winehq.org 12 Jan '21

12 Jan '21

http://bugs.winehq.org/show_bug.cgi?id=19102 Summary: Don`t install 3D Studio Max 9 Product: Wine Version: 1.1.24 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: patsev.anton(a)gmail.com Don`t install 3D Studio Max 9. Installation ended prematurely because of an error -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 18

[Bug 18296] New: DInput has issues with KDE4.2 keyboard input repeat.
by wine-bugs＠winehq.org 11 Jan '21

11 Jan '21

http://bugs.winehq.org/show_bug.cgi?id=18296 Summary: DInput has issues with KDE4.2 keyboard input repeat. Product: Wine Version: 1.1.20 Platform: PC-x86-64 URL: http://www.coh.com OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-dinput AssignedTo: wine-bugs(a)winehq.org ReportedBy: wine(a)eternaldusk.com After upgrading to Kubuntu Jaunty, City of Heroes characters show a horrible staggering when you try move consistently in any direction. The character animation resets at the interval equivalent to the keyboard delay. So, it's as if the application is seeing you press the key over and over - instead of holding it down. Turning off keyboard repeat in the system options eliminates this issue. Modifying the delay only slows the initial staggering. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 41

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-bugs February 2010