http://bugs.winehq.org/show_bug.cgi?id=30755
Bug #: 30755
Summary: gdiplus tests fail if stix fonts present
Product: Wine
Version: 1.5.4
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
Classification: Unclassified
On Centos 6, "make test" causes (among others) the failures
runtest -q -P wine -M gdiplus.dll -T ../../.. -p gdiplus_test.exe.so
~/wine-git/dlls/gdiplus/tests/font.c && touch font.ok
...
font.c:396: Test failed: Expected 0, got 3
font.c:397: Test failed: got NULL font collection
make[1]: *** [font.ok] Error 2
/home/dank/wine-git/tools/runtest -q -P wine -M gdiplus.dll -T ../../.. -p
gdiplus_test.exe.so /home/dank/wine-git/dlls/gdiplus/tests/graphics.c && touch
graphics.ok
...
graphics.c:1978: Test failed: Expected 00000000, got 00000010
Unhandled exception: page fault on read access to 0x00000048 in 32-bit code
(0x6834d776).
Backtrace:
=>0 0x6834d776 get_log_fontW+0x16() in gdiplus (0x0032f8c8)
1 0x68358d57 get_font_hfont+0xf6() in gdiplus (0x0032f9f8)
2 0x6835d1cd GdipDrawString+0x26c() in gdiplus (0x0032fb78)
3 0x71cb8763 test_GdipDrawString+0x232() in gdiplus_test (0x0032fc38)
4 0x71cc5c45 func_graphics+0xb84() in gdiplus_test (0x0032fd18)
...
Looks like
GdipNewInstalledFontCollection() which calls
EnumFontFamiliesExW() which calls
add_font_proc() which calls
GdipCreateFontFamilyFromName()
and is failing because the latter function somehow chokes on the stix fonts
(http://stixfonts.org) bundled with centos 6.
Doing
sudo chmod 000 /usr/share/fonts/stix
works around the problem.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30957
Bug #: 30957
Summary: Unhandled exception: page fault on read access to
0xffffffff in segmented 32-bit code
Product: Wine
Version: 1.4.1
Platform: x86-64
OS/Version: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: chiszp(a)hotmail.com
Classification: Unclassified
Created attachment 40618
--> http://bugs.winehq.org/attachment.cgi?id=40618
backtrace, log
I'm attempting to install Protel Advanced Schematic v3.0 (old software, viewing
setup.exe in a hex editor see references to a Borland installer).
Running 'wine setup.exe' crashes after clicking 'Full Install'. Log included in
attachment as requested.
Disassembling at the crash location 0x1027:0x0508, the instruction appears to
be:
testl 0xffffffff,%fs:0x200
but the crash suggests wine is attempting to read from address 0xffffffff,
rather than treating it as a literal value (a signed -1).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27800
Summary: NFS U1: Incorrect name of the game controller (wheel)
Product: Wine
Version: 1.3.24
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wylda(a)volny.cz
I was asked by Lucas Fialho Zawacki to make some comparison of my wheel between
WinXP and Wine. I took Need for Speed Underground 1 for the tests:
Options -> Controller -> Controller Setup -> "2nd column":
WinXP says: "Wheel"
Wine says: "Joypad"
Tested with:
* wheel "Logitech Wingman Formula Force GP"
* wine-1.3.24-174-g4b4dd30.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24079
Summary: VSphere Client 4.1: Unable to connect to server
Product: Wine
Version: 1.3.0
Platform: x86
URL: http://vsphereclient.vmware.com/vsphereclient/2/5/8/9/
0/2/VMware-viclient-all-4.1.0-258902.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: vince(a)marsters.co.uk
Created an attachment (id=30288)
--> (http://bugs.winehq.org/attachment.cgi?id=30288)
output log when run from a command line
Once installed and dotnet30 installed using winetricks the application runs but
when you enter the server IP, username and password of the ESXi server and
click login there is a connecting message which eventually changes 'Connection
Failed' along with a popup "vSphere Client could not connect to 'server ip' The
server took too long to respond (The operation has timed out)"
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12664
Summary: Game Craft after selecting Pilot
Product: Wine
Version: 0.9.59.
Platform: PC
URL: http://appdb.winehq.org/objectManager.php?sClass=version
&iId=11224
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kur1g3n(a)hotmail.com
Created an attachment (id=12321)
--> (http://bugs.winehq.org/attachment.cgi?id=12321)
Log of what says wine all the way from launcher to game crash
Once in game, we can choose the pilot we want to play, after selecting it, the
game begins loading, and it crashes during loading (or at end ?)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22726
Summary: CodeGear RAD Studio 2007/2009 installation errors:
column 3/4 out of range, missing column in table
L"Property"
Product: Wine
Version: 1.1.44
Platform: x86-64
URL: http://www.codegear.com/products/radstudio
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: msi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wine-bug(a)gigawatt.nl
CC: dank(a)kegel.com, liquitsnake(a)gmx.net
+++ This bug was initially created as a clone of Bug #13042 +++
The installer of CodeGear RAD Studio 2007 and 2009 fails as reported in #13042.
That bug contains a patch which fixes this problem, and allows the installation
to continue. However, later on, it still fails:
err:msidb:get_tablecolumns column 3 out of range
err:msidb:get_tablecolumns column 4 out of range
err:msidb:get_tablecolumns missing column in table L"Property"
I have reported this as a new bug because at first sight this looks completely
unrelated, but if that was wrong, this can be closed as a duplicate.
The steps I have taken to see this problem:
- Start with a clean config
- Set mode to Windows 2000
- Install MDAC 2.8 SP1
- Set mode back to Windows XP
- Make the RAD Studio (2007 or 2009) installation disc available as D:\
- Run D:\Install\Setup.exe
- Click "Retry" once during the automatic .NET Framework installation
- Choose your selection, same problem with everything except for the first
option (CodeGear RAD Studio) deselected, as with everything selected
- Proceed with the installation
It finishes unpacking, and I find the unpacked files as, for example,
.wine/drive_c/users/Public/Application
Data/{B278BA8C-C407-4742-B58E-CE34D8C8A15B}/corey/B1A48A5A/39948DF1/bds.exe
and those files look correct, or at least the text files that I could check do.
However, then it hangs. The installer says "Windows Installer", on the console
I see error messages (look up), and the only action I can take is to click
"Cancel", which also doesn't actually work.
I am using Wine 1.1.44, as reported by wine --version. I do not know what more
information you need, but I will be happy to answer any questions.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29030
Bug #: 29030
Summary: Lego Universe installer looks terrible
Product: Wine
Version: 1.3.32
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: adys.wh(a)gmail.com
Classification: Unclassified
See attachments (inc)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29934
Bug #: 29934
Summary: Weird Worlds: Launcher no longer launches the game
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: samurai_no_densetsu(a)yahoo.es
Classification: Unclassified
Weird Worlds's launcher no longer works as expected. Since this is a
regression, I did a regression test but it was unsuccessful.
The launcher works fine from wine-1.0 to wine-1.3.25, including the stable
version wine-1.2.3. So I tried to bisect 1.3.25 against 1.4-rc4.
When I was doing the bisection learned that between wine-1.3.27 and wine-1.3.33
(both included) the launcher didn't even appear, and manually had to skip all
that range, and within wine-1.3.34 to wine-1.4-rc4 the menu launcher is there
but no longer launches the game. Can't provide a regression id as the issue
clearly raised between wine-1.3.27 and wine-1.3.33, versions in which the
launcher does not start so is virtually impossible to test.
Didn't noticed earlier as the game can be launched from scripts or commandline
this way: wine weird.exe -skiplauncher -game default
Luckyly there's a demo showing the same behaviour here:
http://www.shrapnelgames.com/Demos/DD_WW_win.html
I wish I could add more info, but that's all I have right now.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29503
Bug #: 29503
Summary: Stucuk's Setup System patcher often fails with 'Canvas
does not allow drawing' error message
Product: Wine
Version: 1.3.36
Platform: x86
URL: http://www.fileplanet.com/207230/200000/fileinfo/Dark-
Horizon-Patch-v1.0.6.1
OS/Version: Linux
Status: NEW
Keywords: download, Installer
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gyebro69(a)gmail.com
Classification: Unclassified
Created attachment 38206
--> http://bugs.winehq.org/attachment.cgi?id=38206
screenshot (patcher running in virtual desktop)
The installer of the patch made for Dark Horizon uses a Stucuk's Setup System
according to the file properties. The installer of the community patch made for
Original War also uses this kind of patcher, sharing the same problem.
The patcher for Dark Horizon consists of nearly 3000 small files. The
installation process doesn't take long (15-20 seconds). At some point during
the install process, the patcher is interrupted with an error message:
'Setup Thread Error: Canvas does not allow drawing', and the installer quits
prematurely.
This happens fairly often (maybe 8 times out of 10 attempts), but sometimes the
patcher finishes the job without erroring out.
Before the error message pops up, text which normally appears inside the
installer window also printed and overwritten several hundreds of times in the
upper left corner of the screen (see attached screenshot). This happens both in
virtual desktop mode and in full-screen.
To reproduce the problem with the patcher made for Dark Horizon you don't have
to download the demo for the game; the patch can be installed alone in a
selected directory anywhere inside a wineprefix.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26898
Summary: wine does not show save game screenshots
Product: Wine
Version: 1.3.17
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: vaniaz(a)msn.com
Screenshots are saved in dds format. When saving game, I get the following in
console
fixme:d3d_surface:surface_convert_format Cannot find a conversion function from
format WINED3DFMT_B8G8R8A8_UNORM to WINED3DFMT_DXT1.
Saved screenshot is completely black.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.