wine-bugs April 2013

wine-bugs@winehq.org

1 participants
9368 discussions

[Bug 32326] New: DirectSound output in SNES9x gives crackling/glitchy audio
by wine-bugs＠winehq.org 30 Aug '20

30 Aug '20

http://bugs.winehq.org/show_bug.cgi?id=32326 Bug #: 32326 Summary: DirectSound output in SNES9x gives crackling/glitchy audio Product: Wine Version: 1.5.18 Platform: x86-64 URL: http://files.ipherswipsite.com/snes9x/snes9x-1.53-win3 2.zip OS/Version: Linux Status: UNCONFIRMED Severity: minor Priority: P2 Component: directx-dsound AssignedTo: wine-bugs(a)winehq.org ReportedBy: markk(a)clara.co.uk Classification: Unclassified This bug applies to the SNES9x Super NES emulator. I'm testing with Wine 1.5.18-72-g0c0b229, Lubuntu 11.10 x86-64, Nvidia driver 304.64, SNES9x 1.53. (I set the bug component to directx-dsound, but that might not be correct.) Sound output using DirectSound is very CPU-intensive, and the sound crackles/glitches. Or rather, something about the sound output takes a relatively long time. According to "top" the CPU usage of SNES9x itself doesn't go through the roof with sound enabled. Emulation speed easily reaches 60fps with sound output disabled. On native Windows that's the case with DirectSound output (as opposed to the default is enabled too. CPU usage with sound disabled is ~26%. However on Wine with 48kHz DirectSound output the frame rate I see drops to ~45fps, CPU usage in top ~24% (lower usage because fewer frames per second are being emulated). If I disable the "Sync Sound" option frame rate returns to 60fps, ~30% CPU, but the sound still crackles. That's with the default buffer length of 64ms. Increasing that to 210ms helps a bit; I get 60fps even with Sync Sound enabled, though the sound still crackles. Decreasing buffer length to 16ms I get about 10fps with Sync Sound enabled. I don't think this problem is due to my hardware; other sound-producing programs like Audacious, flash plugin etc. seem to be fine. And by comparison, the Nestopia NES emulator in Wine produces (almost) glitch-free sound regardless of the program's latency setting. $ lspci -vv -s00:1b.0 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) Subsystem: Lenovo Device 384e Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 47 Region 0: Memory at fc300000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel To hopefully reproduce the issue: - Download and unzip SNES9x - Download a ROM image, e.g. from http://pdroms.de/files/supernintendoentertainmentsystem/skipp-and-friends-p… - Run SNES9x. Choose Sound->Settings... and change Sound Driver to Snes9x DirectSound and Playback Rate to 48 KHz. (Selecting any other rate causes a crash for me, see bug 32312.) - Select Video->Display Configuration... and change Output Method to DirectDraw. (The default Direct3D just gives a blank screen, see bug 32319.) - Select File->Load Game... and choose the ROM image. - You should see graphics in the window and hear crackling/glitching sound. - In the sound settings, you can experiment with changing the buffer length and toggling the "Synchronize with sound core" option. I couldn't find any combination which gave artifact-free sound. For a +dsound log see the one I uploaded for bug 32312 at http://bugs.winehq.org/attachment.cgi?id=42668 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9

[Bug 17836] New: Motocross Madness 2 crashes at start
by wine-bugs＠winehq.org 29 Aug '20

29 Aug '20

http://bugs.winehq.org/show_bug.cgi?id=17836 Summary: Motocross Madness 2 crashes at start Product: Wine Version: 1.1.17 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: hoehle(a)users.sourceforge.net Created an attachment (id=20098) --> (http://bugs.winehq.org/attachment.cgi?id=20098) trace and disassembly of crash location In AppDB, people have reported Motocross Madness 2 (mcm2) crashing in the intro but nobody had filed a bug yet. The backtrace makes it look like mcm2 crashes in, or immediately after, quartz.dll or amstream, after accessing ui\events.avi at the start of the program, after displaying for some seconds the stunt & warnings picture also known from the demo. The demo is not affected and proceeds from the intro picture to the menu. A log extract (+almost-all,-relay,-nls) from around the exception is attached. The processed file UI/events.avi is an Intel Indeo v5 video. The installer did not complain that Indeo is mising! Replacing it with a Cinepak avi, with an empty file, deleting it or installing iv5 still produces crashes at the same location in mcm2. Same with clicking to skip the intro picture or disabling quartz.dll. MCM2 suffers from SafeDisk 1.41.000 protection so it would not run as is in wine (or rather, it crashes much earlier). I tried 2 different cracks, both produced the same exception. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 23

[Bug 24320] New: Unexpected DetectEnvStatus.exe crash with Cisco Quick VPN Client (QVPN 1.4.1.2)
by wine-bugs＠winehq.org 28 Aug '20

28 Aug '20

http://bugs.winehq.org/show_bug.cgi?id=24320 Summary: Unexpected DetectEnvStatus.exe crash with Cisco Quick VPN Client (QVPN 1.4.1.2) Product: Wine Version: unspecified Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: ethanfharris(a)gmail.com Cisco QVPN v1.4.1.2 does not work under Wine. QVPN is used to establish an IPSec Virtual Private Network tunnel from a client computer to a Cisco Router/Gateway to facilitate secure communication over the internet. There appear to be 3 errors when running the Cisco QVPN application under Wine: (a) an apparent crash / closure of DetectEnvStatus.exe (b) a failure to resolve a DDNS domain name, and (c) QVPN is not able to ping the gateway router, and all data transfer over the VPN fails. In all cases a popup box appears (see attached screenshot) indicating that DectectEnvStatus.exe has a serious problem and has closed. If anyone wants to debug this, I can supply a copy of QVPN, and I can set up a temporary guest account on my WRVS4400N small business router for testing purposes. QVPN works fine under Windows Vista SP2, and works fine on a Ununtu 10.04LTS host with a Vista guest running under Oracle VirtualBox. So the QVPN application itself is OK, and the problem is related somehow to Wine or various underlying services. On the attached screenshot the DetectEnvStatus popup appears immediately when I attempt to connect the VPN. If I use the IP address of the gateway router I am connecting to in lieu of the DDNS domain name, QVPN will create the VPN, but the tunnel verification ping test fails and the tunnel will not transmit data, which is why the "remote gateway not responding" message also appears on the screenshot. If I specify the DDNS domain name of the remote gateway router, the VPN tunnel is not established (not shown), suggesting a dynamic DNS name-to-IP address resolution related problem in Wine. Any help would be appreciated. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 13

[Bug 23950] New: MPQEdit: Opening a folder results in the wrong error message
by wine-bugs＠winehq.org 27 Aug '20

27 Aug '20

http://bugs.winehq.org/show_bug.cgi?id=23950 Summary: MPQEdit: Opening a folder results in the wrong error message Product: Wine Version: 1.3.0 Platform: x86 URL: http://zezula.net/download/mpqediten32_beta.zip OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: adys.wh(a)gmail.com Attachment #30066 showcases the expected error message ("The system cannot find the path specified"). Instead, running wine mpqedit c:\\ results in "Access denied" error message. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9

[Bug 30853] New:=?UTF-8?Q?=20Wine=20doesn=E2=80=99t=20always=20handle=20?="right alt" properly
by wine-bugs＠winehq.org 20 Aug '20

20 Aug '20

http://bugs.winehq.org/show_bug.cgi?id=30853 Bug #: 30853 Summary: Wine doesn’t always handle "right alt" properly Product: Wine Version: 1.5.5 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: winex11.drv AssignedTo: wine-bugs(a)winehq.org ReportedBy: sloonz(a)gmail.com Classification: Unclassified Created attachment 40410 --> http://bugs.winehq.org/attachment.cgi?id=40410 workaround/quick and dirty fix I’m trying to get World of Warcraft working under Wine. However, I have huge trouble with key bindings (I use unusual key bindings : I use the right half of my keyboard, whereas most players use the left half). After investigation, I found 3 bugs (different behaviors between Wine and my Windows installation). The first one is the management of the right "Alt" key (labeled "Alt-Gr" on my keyboard). When I press AltGr+l under Windows with Spy++, I get the followings events : <03637> 0007045A P WM_KEYDOWN nVirtKey:VK_CONTROL cRepeat:1 ScanCode:1D fExtended:0 fAltDown:0 fRepeat:0 fUp:0 <03638> 0007045A P WM_KEYDOWN nVirtKey:VK_MENU cRepeat:1 ScanCode:38 fExtended:1 fAltDown:1 fRepeat:0 fUp:0 <03639> 0007045A P WM_KEYDOWN nVirtKey:'L' cRepeat:1 ScanCode:18 fExtended:0 fAltDown:1 fRepeat:0 fUp:0 <03640> 0007045A P WM_DEADCHAR chCharCode:'002F' (47) cRepeat:1 ScanCode:18 fExtended:0 fAltDown:1 fRepeat:0 fUp:0 <03641> 0007045A P WM_KEYUP nVirtKey:'L' cRepeat:1 ScanCode:18 fExtended:0 fAltDown:1 fRepeat:1 fUp:1 <03642> 0007045A P WM_SYSKEYUP nVirtKey:VK_CONTROL cRepeat:1 ScanCode:1D fExtended:0 fAltDown:1 fRepeat:1 fUp:1 <03643> 0007045A P WM_KEYUP nVirtKey:VK_MENU cRepeat:1 ScanCode:38 fExtended:1 fAltDown:0 fRepeat:1 fUp:1 Under Wine 1.5.5 however (WINEDEBUG=+msg), I get those : trace:msg:peek_message got type 7 msg 100 (WM_KEYDOWN) hwnd 0x6007e wp eb lp 760001 [note: wp = VK_OEM_PA2] trace:msg:peek_message got type 7 msg 101 (WM_KEYUP) hwnd 0x6007e wp 4c lp c0260001 [note: wp = 'L'] trace:msg:peek_message got type 7 msg 101 (WM_KEYUP) hwnd 0x6007e wp eb lp c0760001 [note: wp = VK_OEM_PA2] With xev, I get : KeyPress event, serial 93, synthetic NO, window 0x4000001, root 0xbc, subw 0x0, time 5086996, (1585,410), root:(2578,425), state 0x0, keycode 108 (keysym 0xfe03, ISO_Level3_Shift), same_screen YES, XKeysymToKeycode returns keycode: 92 XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 93, synthetic NO, window 0x4000001, root 0xbc, subw 0x0, time 5087052, (1585,410), root:(2578,425), state 0x80, keycode 108 (keysym 0xfe03, ISO_Level3_Shift), same_screen YES, XKeysymToKeycode returns keycode: 92 XLookupString gives 0 bytes: XFilterEvent returns: False After "setxkbmap us", AltGr is bound to Alt_R under X (checked with xev), and I get this under Wine : trace:msg:peek_message got type 7 msg 104 (WM_SYSKEYDOWN) hwnd 0x10046 wp a5 lp 21380001 [wp = VK_RMENU] trace:msg:peek_message got type 7 msg 104 (WM_SYSKEYDOWN) hwnd 0x10046 wp 4c lp 20260001 [wp = 'L'] trace:msg:peek_message got type 6 msg 106 (WM_SYSCHAR) hwnd 0x10046 wp 6c lp 20260001 [wp = 'l'] trace:msg:peek_message got type 7 msg 105 (WM_SYSKEYUP) hwnd 0x10046 wp 4c lp e0260001 [wp = 'L'] trace:msg:peek_message got type 7 msg 101 (WM_KEYUP) hwnd 0x10046 wp a5 lp c1380001 [wp = VK_RMENU] (yes, I have a KEYUP without KEYDOWN) Wich is still not the same as Windows. So I think there is two problems here : - ISO_Level3_Shift is not properly recognized by Wine - "AltGr" doesn't have the same behavior under Wine and Windows FYI, attached patch is a workaround to have the same behavior than Windows. With it, I get this under Wine : trace:msg:peek_message got type 7 msg 100 (WM_KEYDOWN) hwnd 0x10062 wp a2 lp 1d0001 [note: wp = VK_LCONTROL] trace:msg:peek_message got type 7 msg 100 (WM_KEYDOWN) hwnd 0x10062 wp a4 lp 20380001 [note: wp = VK_LMENU] trace:msg:peek_message got type 7 msg 100 (WM_KEYDOWN) hwnd 0x10062 wp 4c lp 20260001 [note: wp = 'L'] trace:msg:peek_message got type 7 msg 101 (WM_KEYUP) hwnd 0x10062 wp 4c lp e0260001 trace:msg:peek_message got type 7 msg 105 (WM_SYSKEYUP) hwnd 0x10062 wp a2 lp e01d0001 trace:msg:peek_message got type 7 msg 101 (WM_KEYUP) hwnd 0x10062 wp a4 lp c0380001 Which is still not the same as Windows : - Windows uses (right) control + menu (with fExtended flag for menu) whereas Wine uses left control + left menu. Not investigated if this is related to TranslateMessage. - AltGr+L is a dead symbol on my keymap. Windows send a DEADCHAR message, wheras Wine send nothing. Note that I had to disable the XFilterEvent test in event.c to have those messages, otherwise nothing is sent to the program (but that’s another story for another bug report) But it suffice for my use case (WoW key bindings with right alt) -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 8

[Bug 30193] New: Crysis Wars ded server doesn't resize with wineconsole (curses backend)
by wine-bugs＠winehq.org 19 Aug '20

19 Aug '20

http://bugs.winehq.org/show_bug.cgi?id=30193 Bug #: 30193 Summary: Crysis Wars ded server doesn't resize with wineconsole (curses backend) Product: Wine Version: 1.4-rc6 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: programs AssignedTo: wine-bugs(a)winehq.org ReportedBy: liquitsnake(a)gmx.net Classification: Unclassified Created attachment 39410 --> http://bugs.winehq.org/attachment.cgi?id=39410 screen The Crysis Wars dedicated server, when running under wineconsole with the curses backend, does not resize its viewport. It is stuck at the default 80x25, even if the terminal is considerably larger (see attachment). This produces some unexpected output, as some commands expect a larger size but have to be split over 2 lines via \ My terminal and wineconsole interact just fine, as I have verified with cmd. It's just this app that sticks to 80x25 no matter what. On Windows, it would normally spawn a console window with a size of 132x60 (or less if the desktop resolution can't fit that) Could it be that wineconsole first starts at 80x25 and only later resizes to terminal size? In that case, I can imagine that the app polls the size once during startup and sticks to that, thus limiting itself to 80x25. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 11

[Bug 13624] New: Lineage 2 - The Chaotic Throne - Hellbound
by wine-bugs＠winehq.org 16 Aug '20

16 Aug '20

http://bugs.winehq.org/show_bug.cgi?id=13624 Summary: Lineage 2 - The Chaotic Throne - Hellbound Product: Wine Version: 1.0-rc3 Platform: All OS/Version: other Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: eryk-rutkowski(a)o2.pl Created an attachment (id=13604) --> (http://bugs.winehq.org/attachment.cgi?id=13604) Log from Terminal Problem is in Lineage 2 Hellbound and regarding npkycrypt - dll file. This dll is not work fine and don't recognize keyboard and i can't log in. There is communicate: "The keyboard security module has failed to load. please exit the game and try again" Sorry for my bad english but i'm from other country ;p -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 9

[Bug 33317] New: Python error Fatal Python error: buffer overflow in getpathp.c's joinpath() when executing.
by wine-bugs＠winehq.org 15 Aug '20

15 Aug '20

http://bugs.winehq.org/show_bug.cgi?id=33317 Bug #: 33317 Summary: Python error Fatal Python error: buffer overflow in getpathp.c's joinpath() when executing. Product: Wine Version: unspecified Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: blocker Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: andrew.thomas(a)hpcwales.co.uk Classification: Unclassified Created attachment 44067 --> http://bugs.winehq.org/attachment.cgi?id=44067 Lwsn output from running under wine Wine Version : wine64 --version wine-1.5.25 (64 Bit version) GCC Version : gcc --version gcc (GCC) 4.6.2 Python Version : python --version Python 2.7.3 Operating Systems Used: cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.5 (Tikanga) I have also tried on : cat /etc/redhat-release CentOS release 5.5 (Final) Program trying to run lwsn.exe (network render module part of Lightwave : https://www.lightwave3d.com/ ). 30 Day trial available. Command used: wine lwsn.exe -3 -cLWEXT11-64.CFG -d"z:\home\andy.thomas\Atticus" Scenes\black.lws 1 1 Problem, I compiled wine and setup lwsn.exe in accordance with this article: http://lordtangent.blogspot.co.uk/2007/01/running-lightwave-screamernet-lws… Initially it worked fine when running from the command line. I then wrapped it up in a batch script to be sent to our Linux cluster but got a Python error message : Fatal Python error: buffer overflow in getpathp.c's joinpath() I tried to execute interactively on the cluster and this worked fine but when executed from a script it gives the above error. I launched a forum post (as I a haven't done much troubleshooting with wine) : http://forum.winehq.org/viewtopic.php?f=8&t=18632 I have tried the recommendations but had no success. I re-compiled wine with the above gcc compiler and a more up to date version of Python but I can no longer execute on the command line. I now get the Python error regardless of how I execute the command. Any help would be greatly appreciated. If you need any further debugging please let me know. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 10

[Bug 17124] New: MSYS installer doesn't pop up cmd window?
by wine-bugs＠winehq.org 15 Aug '20

15 Aug '20

http://bugs.winehq.org/show_bug.cgi?id=17124 Summary: MSYS installer doesn't pop up cmd window? Product: Wine Version: 1.1.13 Platform: Other URL: http://www.mingw.org/wiki/msys OS/Version: other Status: NEW Keywords: download, Installer, source Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: austinenglish(a)gmail.com When install msys, it floods the terminal with: This is a post install process that will try to normalize betweenyour MinGW install if any as well as your previous MSYS installs if any. I don't have any traps as aborts will not hurt anything.Do you wish to continue with the post install? [yn ] pi.sh: [: ==: unary operator expectedDo you have MinGW installed? [yn ] pi.sh: [: ==: unary operator expectedWhen you install MinGW I suggest you install it to C:/mingw(replace C: with the drive of your choice). Then create an/etc/fstab file with a line that has a value similar to:C:/mingw /mingwPress ENTER to continue Normalizing your MSYS environment.You have script /bin/awkYou have script /bin/cmdYou have script /bin/echoYou have script /bin/egrepYou have script /bin/exYou have script /bin/fgrepYou have script /bin/printfYou have script /bin/pwdYou have script /bin/rviYou have script /bin/rviewYou have script /bin/rvimYou have script /bin/viYou have script /bin/viewMinGW-1.1 has a version of make.exe within it's bin/ directory.Please be sure to rename this file to mingw32-make.exe once youve echo installed MinGW-1.1 because it\s very deficient in function.Press ENTER to continue.C:\msys\1.0\postinstall>pause Press Return key to continue: Towards the end. It looks like something that should be in a cmd prompt (haven't tested on windows yet). The line endings are also wrong, but that's another bug. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 13

[Bug 22634] New: Yahoo! Widgets will not display EULA
by wine-bugs＠winehq.org 15 Aug '20

15 Aug '20

http://bugs.winehq.org/show_bug.cgi?id=22634 Summary: Yahoo! Widgets will not display EULA Product: Wine Version: 1.1.43 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: gdiplus AssignedTo: wine-bugs(a)winehq.org ReportedBy: wwarsin(a)gmail.com Created an attachment (id=27820) --> (http://bugs.winehq.org/attachment.cgi?id=27820) $wine YahooWidgets.exe After the Yahoo! widget engine is install the first time it runs it asks you to accept the EULA, which will not show... This is kind of hard to explain but its like the yahoowidgets.exe does open, and you can mouse over the area and you can click the "I accept" button and it will the go to open the widgetengine (from what i breifly saw it worked fine) -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 21

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-bugs April 2013