http://bugs.winehq.org/show_bug.cgi?id=23051
Summary: Autoupdate installer cannot shut down Rhapsody 4
Product: Wine
Version: 1.2-rc2
Platform: x86-64
URL: http://service.real.com/rhapsody/download/version4/
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: nsandschn(a)gmx.de
Created an attachment (id=28599)
--> (http://bugs.winehq.org/attachment.cgi?id=28599)
Terminal output in wine-1.2-rc2-111-g9aa9a12
Installation of Rhapsody 4 works fine. On first start it is trying to
autoupdate. The autoupdate installer shows the message:
"Rhapsody is running. It must be shut down during installation. Click OK."
But clicking OK doesn't shut down Rhapsody. When I kill the rhapsody.exe
process by hand the autoupdater continues and finishes successfully. In the
attached terminal output I marked the point where I killed rhapsody.exe.
Shortly before the above message the following lines appear in the terminal:
err:ole:CoReleaseMarshalData IMarshal::ReleaseMarshalData failed with error
0x8001011d
err:ole:CoCreateInstance apartment not initialised
err:ole:get_unmarshaler_from_stream Failed to create marshal, 0x800401f0
err:ole:CoReleaseMarshalData IMarshal::ReleaseMarshalData failed with error
0x8001011d
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29943
Bug #: 29943
Summary: OLE error when executing Myfujifilm application
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ole
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: guittoun(a)wanadoo.fr
Classification: Unclassified
1) download photogenie software from this web page
http://myfujifilm.fr/cmSoftwareStart.do (or you can use this direct link :
http://photoservice.fujicolor.eu/downloads/FFF/B2C_Photogenie.exe)
2) install B2C_Photogenie.exe by doing "wine B2C_Photogenie.exe"
3) Execute photogenie via wine's menu
A fatal error should occur with the message "OLE 80004002"
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21201
Summary: HotWheels Stunt Track Driver 2: CD-Check fails, and
Esc causes page fault.
Product: Wine
Version: 1.1.35
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gaming4jc2(a)yahoo.com
Created an attachment (id=25461)
--> (http://bugs.winehq.org/attachment.cgi?id=25461)
Unhandled page fault on read access to 0x00000000 at address 0x4563b3 (thread
0009) and more...
HotWheels Stunt Track Driver 2 installs fine but fails to find the CD in both
XP and 98 compatibility modes. It will show an image of inserting a CD into
drive and rather than exiting the program with the Esc key, it causes a page
fault which fails to debug and remains fully locked up. Attached is log and me
using the Ctrl+C command to kill the frozen debug program from terminal.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32231
Bug #: 32231
Summary: mouse disabled after some minutes
Product: Wine
Version: 1.5.17
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ahso47(a)yahoo.com
Classification: Unclassified
After flying some minutes in FSX mouse disables.
I was able to avoid this behaviour in 32bit 1.5.17 wine by compiling with:
CONFARGS="--without-xinput2"
Thanks for fixing.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32119
Bug #: 32119
Summary: winebrowser.exe crash
Product: Wine
Version: 1.5.16
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: r6btzkgnhs(a)snkmail.com
Classification: Unclassified
i am currently running mirc 7.27 on ubuntu 12.04 with wine 1.4.1 and when i try
to open a URL i get the 'Program Error' dialog box stating the winebrowser.exe
'encountered a problem and needs to close'. i've tried using the development
version too and still the same behavior. i had been using mIRC v7 for a while
on an ubuntu 10.04 machine with wine-1.4 on it and no issues there...
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30642
Bug #: 30642
Summary: LBAWin; No midi playback
Product: Wine
Version: 1.5.3
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: package.madur(a)googlemail.com
Classification: Unclassified
Created attachment 40113
--> http://bugs.winehq.org/attachment.cgi?id=40113
Log file of the wine console
Running openSUSE 12.1 x86_64, Wine 1.5.3 from the repositories. Followed all
the instructions over here: http://wiki.winehq.org/MIDI . Midi playback works
with aplaymidi, I created all the recommended registry entries and tested the
MIDI playback in Wine with the MCI shell, that was successful.
When I try to run Little Big Adventure for Windows, i.e., the official Windows
port of the original DOS game,
(http://www.magicball.net/downloads/programs/lbawin ) I get CD music, sound
effects and voices working but there's no midi music playback. I attached the
log file output, the following error is shown:
fixme:winmm:MXD_GetControlDetails What should the sw-side mixer controls map
to?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=16855
Summary: setup_exception_record stack overflow
Product: Wine
Version: 1.0.0
Platform: Other
OS/Version: other
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: wintab32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: maxcvs(a)email.it
Created an attachment (id=18593)
--> (http://bugs.winehq.org/attachment.cgi?id=18593)
the error received
I'm running TOAD.exe (www.toadsoft.com/) version 8.5.3 with wine 1.0 (debian
sid).
Whem I'm on a query window, putting the cursor over the table name and pressing
F4 I got the following error
setup_exception_record stack overflow 1252 bytes in thread 0009 eip 00408520
esp 00230e4c stack 0x230000-0x231000-0x340000
TOAD then freezes and cannot be usable anymore.
It should instead have opened a window with a table-description.
I don't have a crash so I don't know how to give you a backtrace.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30287
Bug #: 30287
Summary: Raidcall 6.3 doesn't connect
Product: Wine
Version: 1.4
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: silpablo(a)hotmail.com
Classification: Unclassified
I cannot connect to the lastest version of raidcall. wine worked fine with the
previous release of raidcall (6.1)
here the log:
p11-kit: couldn't load module:
/usr/lib/i386-linux-gnu/pkcs11/gnome-keyring-pkcs11.so:
/usr/lib/i386-linux-gnu/pkcs11/gnome-keyring-pkcs11.so: no se puede abrir el
archivo del objeto compartido: No existe el archivo o el directorio
fixme:ntdll:find_reg_tz_info Can't find matching timezone information in the
registry for bias 180, std (d/m/y): 0/00/0000, dlt (d/m/y): 0/00/0000
fixme:win:EnumDisplayDevicesW ((null),0,0x32f6ec,0x00000000), stub!
fixme:richedit:IOleClientSite_fnQueryInterface 0x1434308: unhandled interface
{00000119-0000-0000-c000-000000000046}
fixme:richedit:ME_GetOLEObjectSize unsupported format
fixme:richedit:ME_GetOLEObjectSize unsupported format
fixme:richedit:ME_GetOLEObjectSize unsupported format
fixme:ntdll:find_reg_tz_info Can't find matching timezone information in the
registry for bias 180, std (d/m/y): 0/00/0000, dlt (d/m/y): 0/00/0000
fixme:ole:TLB_ReadTypeLib Header type magic 0x00905a4d not supported.
err:ole:TLB_ReadTypeLib Loading of typelib L"C:\\users\\pablo\\Application
Data\\raidcall\\plugins\\webplugin_en.dll" failed with error 0
err:ole:TLB_ReadTypeLib Loading of typelib L"C:\\users\\pablo\\Application
Data\\raidcall\\plugins\\webplugin_en.tlb" failed with error 2
fixme:urlmon:protocol_continue Could not get cache file
fixme:urlmon:protocol_continue Could not get cache file
fixme:mountmgr:harddisk_ioctl Unsupported ioctl 74080 (device=7 access=1
func=20 method=0)
fixme:mountmgr:harddisk_ioctl Unsupported ioctl 74080 (device=7 access=1
func=20 method=0)
fixme:mountmgr:harddisk_ioctl Unsupported ioctl 74080 (device=7 access=1
func=20 method=0)
fixme:mountmgr:harddisk_ioctl Unsupported ioctl 74080 (device=7 access=1
func=20 method=0)
fixme:urlmon:protocol_continue Could not get cache file
fixme:urlmon:protocol_continue Could not get cache file
fixme:urlmon:InternetBindInfo_GetBindString not supported string type 12
fixme:urlmon:protocol_continue Could not get cache file
fixme:urlmon:protocol_continue Could not get cache file
fixme:ras:RasEnumConnectionsA (0x630607a8,0x198e7e0,0x6305f610),stub!
fixme:ras:RasEnumConnectionsA RAS support is not implemented! Configure program
to use LAN connection/winsock instead!
fixme:urlmon:protocol_continue Could not get cache file
fixme:urlmon:protocol_continue Could not get cache file
fixme:urlmon:protocol_continue Could not get cache file
fixme:urlmon:protocol_continue Could not get cache file
err:ole:RevokeDragDrop invalid hwnd (nil)
err:ole:RevokeDragDrop invalid hwnd (nil)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18157
Summary: Approach Welcome diaglog missing
Product: Wine
Version: 1.1.19
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: msvcrt
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ToddAndMargo(a)verizon.net
Created an attachment (id=20621)
--> (http://bugs.winehq.org/attachment.cgi?id=20621)
Approach without opening dialog box
Hi All,
I am am the OP on 15088. Now that I can actually get into Approach, I have
been using it all day. I have five bugs to report. (I am presuming you want
them on different reports.) I am running the native msvcrt.
sh -c "cd /home/wine/drive_c/lotus/approach; WINEDEBUG=+loaddll
WINEDLLOVERRIDES=msvcrt=n /usr/local/bin/wine ./approach.exe"
Bug number three: when Approach starts, it is suppose to show a "Welcome to
Approach" dialog box. In Wine it does not.
To reproduce:
1) open Approach with the native msvcrt
To see what this should look like (or see my attachment),
1) open Approach with the native msvcrt
2) open a database
3) close the database (File, Close). The welcome to Approach dialog will pop
up
Here is a sample database to play with:
ftp://www.xpertss.com/pub/outgoing/invcalcs.zip
-T
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=31965
Bug #: 31965
Summary: mouse capture/behavior wrong
Product: Wine
Version: 1.5.15
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: m.lanuschny(a)chello.nl
Classification: Unclassified
Hello,
first of all I am not sure if this is reallyh a bug or some sort of bug in my
config, but since i was not able to fix it/find a solutiuon i post it here.
I have had a period of no issues and Eve-online was working fine with multiple
clients running.
A couple weeks ago (might be months now) this issue poped up after a OS update
and i think there was also a wine update (i think it was to wine 1.5.13, but i
did not take a note then, so this is more a guess than a fact)
issue i am experiencing:
when grabfullscreen is set to N (=default):
The mouse pointer can leave the eve client by simply moving it out of the
eve-client window. But within the eve-client window the mouse behaves wrong.
For example when coming from different app and clicking on the eve-client
window while in station, the ship spins. The right click pop-up menus do not
highlight entries when moving the mouse cursor over them, eventually a random
item gets selected when keeping moving the mouse then i can navigate to the
wanted pop-up menu item using the arrow-keys. Seems as if there is an offset
between the mouse-pointer location i see and how the client responds to it.
Also in-game icons, that should light up when moving the mouse-pointer over it
do not highlight.
when grabfullscreen is set to Y:
Within the EVE-client window the mouse behaves as expected, but now the mouse
pointer can not leave the EVE-client window. I would understand this behavior
if i was running wine in a full screen mode, but i don't.
Before this issue i have had grabfullscreen in default mode (=N) ann was able
to move the mouse-cursor freely. AFAIK nothing changed in my config.
Here some data:
Ubuntu 12.04 (precise) 64 bit
kernel to 3.2.0-32-generic
processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
RAM: 4 GB
NVIDIA Driver Version: 295.40
NVIDIA GeForce GTX 550 Ti
wine 1.5.15
wine settings changed with winetricks:
ddr=opengl
mwo=force
psm=enabled
videomemorysize=default
vsm=hardware
(no grabfullscreen=y selected, default is grabfullscreen=n)
when checking the config using winecfg the tab 'graphics' has the following
settings:
- Automatically capture the mouse in full-screen windows -> checked
- Allow the window manager to decorate the windows -> checked
- Allow the window manager to control the windows -> checked
- Emulate a virtual desktop -> NOT checked
I start the eve client with somthing like this:
wine explorer /desktop=One,1280x960 "C:\Program Files\CCP\One\eve.exe"
eve is starting fine and is behaving fine as long i do not need to move the
mouse outside of the client.
I do not know what data i should attache to this and how to get that data.
Please advice.
thanks
--- Comment #1 from m.lanuschny(a)chello.nl 2012-10-14 02:27:01 CDT ---
edit:
I have asked in the in-game Linux-channel, but no-one seem to have this issue
or wa snot online at the thime i was asking.
I have also created two threads about this in the eve-o forums and from the
responses it seems that noone that have read these threads has this issue.
I have searched the winehq site for similar bugs/reports and found this:
30057 8 0 -unknown normal Linux --- mouse capture
broken in xserver 1.11 (ubuntu 12.04)
but the bug seems resolved.
I did run the wine test suite and it found 20 failures, but since some dll are
set to native it did not report them (if i understood the tool correctly)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.