http://bugs.winehq.org/show_bug.cgi?id=25812
Summary: Dead Space flames and flame-alike effects are not
rendered
Product: Wine
Version: 1.3.11
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: NightNord(a)gmail.com
Created an attachment (id=32894)
--> (http://bugs.winehq.org/attachment.cgi?id=32894)
Screenshot of burning flamethrower alt-fire
>From all flames only yellow light is rendered, no flame is visible at all.
Exceptions:
Flames from US Valor engines from one side are visible when you are looking at
them from other side of room, i.e. from >60 degrees (they are blue).
Flames in some tubes, that you need to cross are also rendered, when you are
looking at them from side, but not visible, when you are burning in them - this
is probably just other effect in place.
All other flames are not visible. Examples:
1) Flame from flamethrower.
2) Various flame traps.
3) Flame from shuttle engines and from shuttle crash.
4) "Hyperspace" effect in the beginning.
5) Hive Mind's flame
etc...
Screenshot of flamethrower alt-fire burning and log of same process, truncated
to 1000 lines from both sides are attached. Log was ended by wineserver -k.
fglrx: 10.12, HD4570 (probably this is common issue, not only fglrx's, but hard
to say for sure - info about video card hardware and drivers in recent appdb
tests is missing).
wine: from 1.3.6 to 1.3.11, 1.3.11 with INTZ support reverted (see #25747).
This could be relevant, but, as far as i remember, hyperspace effect and crash
flames were also missing in 1.3.11, but it's hard to be sure - it's looked very
bad.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25816
Summary: SoftPlan 13 : crashes when starting
Product: Wine
Version: unspecified
Platform: x86-64
URL: http://www.softplan.com/
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jeanic_o(a)hotmail.com
Created an attachment (id=32900)
--> (http://bugs.winehq.org/attachment.cgi?id=32900)
Debug trace
After running a normal installation complete normally. The program could not
start and crashes when opening.
I'm running version 1.3.11 on a 10.10 Ubuntu with all system work ok.
I tried older version with the same issue.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25819
Summary: Wine: Non-active buttons in GUI don't have label
visible thu remote NX server-client connection
Product: Wine
Version: unspecified
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: maxprasak(a)atlas.cz
On one side I have x86_64 machine where installed:
- SLES10 SP3 with KDE3 and Gnome graphics interface
- wine 1.3.10 (32bit version)
- FreeNX server 0.7.3-4.1
When I connect to this machine via some nxclient (i.e. Nomachine nxclient), I
saw everything as I expected, but non-active buttons don't have the labels or
images!
In nx client I can set connection speed as modem/isdn/adsl/wan/lan. I found,
that it's working only when I set this speed to lan (maximum). All other
choices generate invisible buttons which are actually inactive.
I tried all versions of wine from 1.1.38 to latest, no success.
I tried other older versions of FreeNX, no success.
I tried NXserver directly from NoMachine, same problem.
I tried another machine with SLES11 SP1 and KDE 4, same problem.
I tried more versions of Gnome gui, same problem.
All linux windows with buttons working thru NX server-client, but from wine
not.
Same situation is in our widows application, but it's not a problem of this
application.
Problem can be easily reproduced. SLES 10 or 11 + KDE or Gnome + FreeNX + Wine
on one side and connect to in via nxclient and execute winecfg and you can
see...
(Server machine is 64bit, but I'm using 32bit version of wine, FreeNX and
appropriate libraries.)
Any idea?
Thanks Max
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25849
Summary: Adjustments panel lacks Process button in Photomatix
4.0
Product: Wine
Version: 1.2.1
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: blacksir(a)gmail.com
I was able to install Photomatix 4.0 on Ubuntu 10.10 (winetricks dotnet20
vcrun6 gdiplus fontfix). HDR-image creation works fine, but it can't be
tonemapped because Adjustments panel lacks it's only button - Process.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25852
Summary: StarCraft II Problems
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: advapi32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: p4repwnag3(a)gmail.com
Created an attachment (id=32940)
--> (http://bugs.winehq.org/attachment.cgi?id=32940)
Pic1
Well, as you can see in the images I don't get the outer space back round at
the login screen and then in-game I only get the HUD. I don't know how this
happens if anyone can help me that would be great.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25854
Summary: go up in the
Product: Wine
Version: 1.3.12
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: 203065(a)gmail.com
Created an attachment (id=32946)
--> (http://bugs.winehq.org/attachment.cgi?id=32946)
logs from terminal
I try to run PES 11.
the menu get crazy.
when I am in the game or the menu of the game I feel that the arrow up is hold
but it is not at real.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25858
Summary: Program error after running application
Product: Wine
Version: 1.3.11
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: nhiirage(a)gmail.com
Created an attachment (id=32955)
--> (http://bugs.winehq.org/attachment.cgi?id=32955)
Terminal dump after running $ wine application
A few seconds after opening the application. Wine alerts that it can be caused
by the program or either a deficiency in Wine. This problem is not present when
running in Windows.
Attached herewith is the dump data from the terminal. Thanks
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25859
Summary: winealsa cannot play 11025Hz on HDA even when HDA
codec support 11025Hz
Product: Wine
Version: 1.3.12
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: winmm&mci
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: superquad.vortex2(a)gmail.com
using winealsa.drv and HDA codec which support 11025Hz
any application using waveoutopen cannot play 11025Hz 16bit stereo with the
following hidden warning message unless you use WINEDEBUG=warn+wave
warn:wave:wodOpen unable to set buffer time: Invalid argument
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25889
Summary: FDM (Free Download manager) fails to start in the
second & Third time of being in use
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: M4.Guest(a)Gmail.com
When U add some dll libraries to .wine
FDM works but for mainly one time than it stops to work for the second day of
being in use !!
I do not know the problem!!
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25891
Summary: Keystroke Ctrl-Home not working
Product: Wine
Version: 1.3.10
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: dos
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: albertpool(a)solcon.nl
Created an attachment (id=32999)
--> (http://bugs.winehq.org/attachment.cgi?id=32999)
Dutch train planner from 1989
I'm having an old DOS application, the Dutch train journey planner from
1989/90, which runs fine on Windows Vista.
On Wine, all keystrokes are accepted and executed like they should, except the
Ctrl-Home command for closing the program.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.