http://bugs.winehq.org/show_bug.cgi?id=25100
Summary: the program don't start...
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: programs
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: salvatore91salvatore(a)yahoo.it
....
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32900
Bug #: 32900
Summary: The Bat 5.2.2 - keyboard keys stick
Product: Wine
Version: 1.1.22
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: sprog(a)online.ru
Classification: Unclassified
It happens rarely and may be related to RU keyboard layout.
You press Cntr-N a new message form is created but pressing letters on a
keyboard won't work as expected. If fact it's like you're constantly holding
right CTL key. You press right CTL again and the bug disappears....
The same happens happens with ALT key too. The probles was in Wine versions
starting from 1.4.1
Unfortunately I can't give you the conditions how to reproduce the bug. This
report is more like "think about what could go wrong". If you can advise how to
trace this problem - I'll do it.
The Bat all so has problems with ole32. From to time the Connection Center
causes OLE32 error. The conditions are unkown. It happens once if 2-3 days.
After that the connection center works but the status bar is showing OLE32
error...
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21448
Summary: RollerCoaster Tycoon 3 does not accept the original
disc
Product: Wine
Version: 1.1.36
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: thomas.mertes(a)gmx.at
Created an attachment (id=25828)
--> (http://bugs.winehq.org/attachment.cgi?id=25828)
Error log and content of message box when starting RollerCoaster Tycoon 3
When starting RollerCoaster Tycoon 3 it asks for the original disc although the
original disk is in. There are some errors logged (see attachment) and then a
message box appears:
Please insert the original disc instead of a backup. See
www.securom.com/copy for more details
Greetings Thomas
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30186
Bug #: 30186
Summary: Wine Bugzilla quick search return zero result for
keywords
Product: WineHQ Bugzilla
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: bugzilla-unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fracting(a)gmail.com
Classification: Unclassified
If I remember correctly, it works yesterday.
Today I try to search some short keywords in Wine Bugzilla quick search box,
and found it doesn't work as before:
For example, search for "win","mac","wow", "aj", "a", the result is empty.
Here is a example URL:
http://bugs.winehq.org/buglist.cgi?query_format=specific&order=relevance%20…
Bug or feature?
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21424
Summary: Cygwin 1.7.1 bash crashes
Product: Wine
Version: 1.1.36
Platform: x86
OS/Version: Linux
Status: NEW
Keywords: download, source
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
cygwin installs now, but one sees the following crash
10 [main] bash 9 _cygtls::handle_exceptions: Exception:
STATUS_ACCESS_VIOLATION
1271 [main] bash 9 open_stackdumpfile: Dumping stack trace to
bash.exe.stackdump
err:ntdll:RtlpWaitForCriticalSection section 0x736d2784 "loader.c:
loader_section" wait timed out in thread 0036, blocked by 003c, retrying (60
sec)
during postinstall, and also when running bash interactively.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19713
Summary: Some serial port communication functions behave
differently in Wine and Windows.
Product: Wine
Version: 1.1.27
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: kernel32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fenixk19(a)mail.ru
Created an attachment (id=23025)
--> (http://bugs.winehq.org/attachment.cgi?id=23025)
Test program
This makes test program to hang in Wine, but in MS it is ok. Test program
attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13296
Summary: regression problem in upgrade to Ubuntu Hardy/1.0-rc1:
Palm Hotsync over serial Segmentation Fault
Product: Wine
Version: 1.0-rc1
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jan-winehq(a)h-i-s.nl
Created an attachment (id=13150)
--> (http://bugs.winehq.org/attachment.cgi?id=13150)
Logging output
I upgraded to Ubuntu Hardy, and wine 1.0-rc1.
Hotsync manager 1.0 for Palm Pilot worked fine before.
http://appdb.winehq.org/objectManager.php?sClass=version&iId=10362
Now it crashes half-way synchronising over the serial port, sometimes after a
few seconds, sometimes much later in the process.
These crashes reproduce well, and yield a segmentation fault without further
information
$ wine hotsync.exe
Segmentation fault
$
I do not know if this means that a part of Wine crashes, or just the
application.
I added logging, where it seems that the problem lies within the call below:
0009:CallTo16(func=111f:072a,ds=1087,118f,7404,0000,0006) ss:sp=1087:ffd0
I am not sure if the problem lies with wine, or that other problems with Ubuntu
Hardy may relate to this.
It is disappointing that an application that used to work fine, and I came to
depend on, is now broken.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25083
Summary: HyperTerminal unable to loop back on COM1 (RS-232)
Product: Wine
Version: 1.3.6
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: graham(a)nerve.org.za
On a machine with an on-board RS-232 port at COM1, HyperTerminal (as shipped
with Windows XP) is firstly unable to detect the port until changes are made in
the WINE registry, thereafter, after attaching a simple loopback adapter (pins
2 and 3 of a DB9F shorted) no characters are echoed to the screen.
Obtaining the software:
>From a Windows XP installation, copy the files hypertrm.exe and htrn_jis.dll
from 'C:\Program Files\Windows NT' and hticons.dll and hypertrm.dll from
C:\Windows\System32' into a suitable directory below .wine/drive_c
or
Download a free 30 day trial of HyperTerminal Private Edition 7.0 from
http://www.hilgraeve.com/hyperterminal/
Create a symbolic link for COM1, documented here:
http://www.winehq.org/docs/wineusr-guide/misc-things-to-configure
ln -s /dev/ttyS0 ~/.wine/dosdevices/com1
At this point, starting HyperTerminal will result in no serial ports being
shown.
Now, create a registry entry in WINE for the serial port, mentioned in this bug
report:
http://bugs.winehq.org/show_bug.cgi?id=4282
Add the following lines to .wine/system.reg [Hardware\\Devicemap\\SerialComm]
"Serial0"="COM1"
Now HyperTerminal can be started, COM1 can be selected and configured, but no
characters are echoed to the screen.
However, the free terminal program, simply named 'Terminal' and available here:
https://sites.google.com/site/terminalbpp/
Does echo characters to the screen.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10051
Summary: Parallax SX Key IDE cannot detect serial port under WINE
Product: Wine
Version: 0.9.46.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: wine-setupapi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ultimatedevr(a)yahoo.com
Created an attachment (id=8599)
--> (http://bugs.winehq.org/attachment.cgi?id=8599)
Result of running SXKey.exe in wine with the +setupapi debug flag.
I am trying to run the Parallax SX Key IDE through WINE, however the IDE does
not detect any of my serial ports. I have symlinked them to ~/.wine/dosdevices/
and added them to my registry, however the IDE still cannot detect my serial
ports.
I am currently running WINE v.0.9.46 (the same problem exists in the CVS
version as well).
(BTW, I have heard of others getting this to work, yet others who couldn't:
http://forums.parallax.com/forums/default.aspx?f=15&m=217429&g=221692)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.