http://bugs.winehq.org/show_bug.cgi?id=14340
Summary: Dungeon Keeper 2 crashes after 10min with unhandled page
fault
Product: Wine
Version: 1.1.0
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hewus.owns(a)gmail.com
Created an attachment (id=14635)
--> (http://bugs.winehq.org/attachment.cgi?id=14635)
Crash log of standard debug output
Dungeon Keeper 2 crashes after working just fine for about 10 minutes. I have
experienced this twice now (out of two attempts at playing a game). I was
playing normally, and noticed no apparent trigger that caused the crash. Both
crashes happened at around 10 minutes into the game (although I didn't
accurately time them).
Using native dinput.dll due to bug 13290. Let me know if additional debug
output is required.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=12060
Summary: Three bugs in MilkDrop Visualization in WinAMP 5.5.2
Product: Wine
Version: CVS/GIT
Platform: PC
URL: http://download.nullsoft.com/winamp/client/winamp552_ful
l_en-us.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: t.artem(a)mailcity.com
Created an attachment (id=11432)
--> (http://bugs.winehq.org/attachment.cgi?id=11432)
The way it looks like (red lines are painted intentionally)
1) Direct3D window is not placed withing its parent window
2) Some visualizations cause Direct3D window to be split weirdly (vertically by
two regions, then left region is split into two, and so on).
3) F1 button which has to show a help window within Direct3D window shows
garbage
Screenshot is attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=36020
Bug ID: 36020
Summary: LEGO Lord of the Rings map not drawn - black
background; transparancy issue?
Product: Wine
Version: 1.7.16
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: andreas.angerer(a)hotmail.com
Created attachment 48158
--> http://bugs.winehq.org/attachment.cgi?id=48158
Black boxes around avatars
In Lego Lord of the Rings, there seems to be a tranparancy issue, since there
are areas where there are black boxes around certain pictures. Moreover there
is a severe problem when looking at the map (screenshot attached), I suppose
this happens because of the same bug, but I'm not sure.
Screenshot 1: Black boxes around character avatars, lifes...
Screenshot 2: opening map...
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37208
Bug ID: 37208
Summary: FreeOrion hangs when starting a quick game
Product: Wine
Version: 1.7.25
Hardware: x86
URL: https://sourceforge.net/projects/freeorion/files/FreeO
rion/FreeOrion%20Version%200.4.4/
OS: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: gyebro69(a)gmail.com
Created attachment 49460
--> https://bugs.winehq.org/attachment.cgi?id=49460
terminal output
The game needs native msvcp100.dll to start, see bug #37207
>From the main menu only <Single Player> works, when you click on <Quick Start>
the game hangs with high cpu usage.
Probably the same issue arises when you try to load a previously saved game
that was created during a single player match (<Load Game> menu) or when you
host a multiplayer game from the <Multi player> menu.
The same problem with Wine 1.4.1, 1.6.2 too.
Fedora 20
Nvidia binary drivers 340.32
FreeOrion-v0.4.4-RC4-7641-Win32-Setup.exe
md5sum: 55ab2bc94ff6df77b6f5eed30f3fc8df
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37167
Bug ID: 37167
Summary: IEC 61850 v2.02 example client expects
'wine_pcap_findalldevs_ex' to return adapter names in
'<protocol>://\Device\NPF_<adaptername>' format
Product: Wine
Version: 1.7.25
Hardware: x86
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: focht(a)gmx.net
Hello folks,
continuation of bug 37061
--- snip ---
$ wine ./IEC61850_Example_Client.exe
fixme:heap:HeapSetInformation (nil) 1 (nil) 0
fixme:wpcap:wine_pcap_findalldevs_ex ("rpcap://" (nil) 0x33fa64 0x33fb78):
partial stub
Can't start server: GOOSE Service failed to perform the requested action
(-73)
Stopping IEC61850 Client
Freeing IEC61850 Client
IEC61850 Client Example has ended, press enter to exit
--- snip ---
The client expects the returned adapter/interface names in following format:
<protocol>://\Device\NPF_<adaptername>
Where '<adaptername>' has usually '{GUID}' format on Windows.
It uses the adapter names returned from 'GetAdaptersInfo' to construct the
string and does 'stricmp' on 'name' member of each 'pcap_if' list entry
(returned by 'wine_pcap_findalldevs_ex') to match the entry.
Output of adapter names from Linux native:
--- snip ---
$ dumpcap -D
1. virbr0
2. tun0
3. nflog
4. nfqueue
5. em1
6. wlp4s0
7. any
8. lo (Loopback)
--- snip ---
$ sha1sum SET\ IEC61850DLLV2\ Demo.exe
72ebe36f11e4a3fb5c117db7bd6b367b4e0eb058 SET IEC61850DLLV2 Demo.exe
$ du -sh SET\ IEC61850DLLV2\ Demo.exe
1.1M SET IEC61850DLLV2 Demo.exe
$ wine --version
wine-1.7.25
Regards
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32252
Bug #: 32252
Summary: Corel Painter 12 EULA next button greyed out no matter
what
Product: Wine
Version: 1.5.17
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: andrewfulrich(a)gmail.com
Classification: Unclassified
Created attachment 42558
--> http://bugs.winehq.org/attachment.cgi?id=42558
wine output
When I run setup.exe for Corel Painter 12, it loads up and takes me to the
EULA. I can scroll to the bottom and check "I accept the terms and
conditions", but it doesn't un-grey the "Next" button so I can't continue the
setup. I am attaching the wine output. The last two lines are outputted when
I clicked the window and then the checkbox.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30760
Bug #: 30760
Summary: Crash (Unhandled page fault exception) exiting Open
Metronome (WAV version)
Product: Wine
Version: 1.4
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: james_avera(a)yahoo.com
Classification: Unclassified
Created attachment 40278
--> http://bugs.winehq.org/attachment.cgi?id=40278
Crash trace saved from "Program Error" dialog
Open Metronome always crashes when exiting with "Unhandled exception: page
fault on read access to 0xffffffff in 32-bit code..."
See attached backtrace.txt
The program is Open Metronome 5.06 which works (no crashes) on 32-bit Windows
7.
The Wine host is Ubuntu 11.10 64-bit.
The .msi file I installed is Open_Metronome_for_Windows-WAV.msi
and can be downloaded at
http://sourceforge.net/projects/openmetronome/files/openmetronome/5.06/Open…
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32783
Bug #: 32783
Summary: STEP7_Lite_V30_incl_SP4 Setup Failed to start the
service, Error:1053, Service request timeout.
Product: Wine
Version: 1.5.22
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fangendoucg(a)gmail.com
Classification: Unclassified
Created attachment 43286
--> http://bugs.winehq.org/attachment.cgi?id=43286
Terminal Output
env: ubuntu12.04 & wine 1.5.22 with the patch of the bug 32764
The software can be freely downloaded from:
https://a248.e.akamai.net/cache.automation.siemens.com/dnl/DQ/DQzMjkzAAAA_3…
extract it, cd to folder STEP7_Lite_V30_incl_SP4 , then run:
$wine Setup.exe
While installing Automation License Manager V4.0 SP3, a dialog box showed like
the attachment "dialog_box_1", click *R* showed another one like the attachment
"dialog_box_2". The Chinese words in dialog_box_2 means insufficient buffer.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=20907
Summary: $ORIGIN is undefined on NetBSD, breaking compile
Product: Wine
Version: 1.1.33
Platform: PC
URL: http://mail-index.netbsd.org/netbsd-users/2009/07/29/m
sg004188.html
OS/Version: NetBSD
Status: UNCONFIRMED
Keywords: download, source
Severity: blocker
Priority: P2
Component: build-env
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
When compiling on NetBSD, build fails _really_ early, with:
execname not specified in AUX vector
googling around, I found:
http://mail-index.netbsd.org/netbsd-users/2009/07/29/msg004188.html
which shows that apparently $ORIGIN is not defined on NetBSD. I'm not quite
sure wine can work around it, so marking the bug as unconfirmed for now...
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29399
Bug #: 29399
Summary: CloneSpy: nested context menus inaccessible.
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: hgtoo(a)yahoo.com
Classification: Unclassified
Set CloneSpy File>Options>Report>Presentation of equal files = Wait until all
files are scanned AND display all equal files together in a list.
Scan a directory containing duplicate files.
Right-click any listed file to bring up the context menu.
Trying to access any of the nested sub-menus causes whole context menu to
disappear, whether with mouse or keyboard. I can't find a workaround to access
the nested commands.
CloneSpy 2.6.2, Wine 1.2.3, Mint 10 fully up to date.
CloneSpy doesn't seem to have come up here before for some reason. It's this
program here: http://www.clonespy.com
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.