http://bugs.winehq.org/show_bug.cgi?id=32224
Bug #: 32224
Summary: LTspice: selected text/component after Ctrl+F not
highlighted
Product: Wine
Version: unspecified
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: testelor(a)yahoo.com
Classification: Unclassified
Steps to reproduce:
1) Download and install LTspice -
http://ltspice.linear.com/software/LTspiceIV.exe
2) Run LTspice using:
$ wine scad3.exe -nowine
3) Create a new schematic, press 'R' (resistor), for example, and place
it twice by clicking. There should be R1 and R2 on the schematic.
4) Press Ctrl+F and search for "r2", no quotes, it should be highlighted in
yellow, but they're not.
Side note:
- create a new schematic, press F2 to bring up the device list.
- select current, place it on the schematic
- right-click on it and type '1', no quotes, then OK
- press 'R', place it next to the current source, in parallel
- right click on it and replace "R" with '1', no quotes, then OK
- press 'G' and place ground on the lower pins of both components
- press F3 and draw a net by clicking on the unconnected current source's pin,
then on the resistor's
- press 'S' and write ".tran 1", no quotes, don't forget the dot, place it on
the schematic
- in the toolbar, press the 'running man' button, or right-click on the
schematic and choose "run"
- it should be almost instant, a new empty window will pop up, above
- move the mouse cursor over the resistor until the cursor changes into a
current-clamp (something black with a red arrow), then click once to display
the current through the resistor
- in the newly created window, there will be a trace displayed and a label at
the top, reading I(R1)
Alt+left-clicking on the label will highlight the resistor. That's how it
should look like after Ctrl+F. Alternatively, you can just run "wine
scad3.exe", no "-nowine" switch, and repeat the 4 steps in the beginning.
No screenshot as it doesn't make sense to show what doesn't happen...
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28282
Summary: Sound constantly crackling in StarCraft II
Product: Wine
Version: 1.3.26
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: pitlicek(a)gmail.com
Sound is crackling since 1.3.26 (and still does in 27) and console is spammed
with "err:alsa:wine_snd_pcm_recover underrun occurred".
Using ALSA in Wine (PulseAudio in Ubuntu 11.04), full acceleration (changing to
emulation doesn't fix it), 48 kHz (my SoundBlaster can handle it, and again,
change makes no difference), 16 bps. Using OSS and padsp results in no sound at
all.
But it's still better than no sound in 1.3.25 after mmdevapi
rewrite/implementation. ;)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=31387
Bug #: 31387
Summary: Helicopter's tail prop is sometimes partly black in
GTAIV
Product: Wine
Version: 1.5.9
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: b7.10110111(a)gmail.com
Classification: Unclassified
Created attachment 41247
--> http://bugs.winehq.org/attachment.cgi?id=41247
Screenshot
This bug is similar to bug 21197, but this particular thing wasn't fixed by the
commit which did fix that bug. See the screenshot. Symptoms are the same - one
of the propeller blades is black with black pixels around.
How to reproduce once in the game:
1. Find/spawn Police Maverick helicopter
2. Get inside it
3. Take off to be about 10 m above ground
4. Press 'S' and hold it so that helicopter punches the ground
5. See the artifact appear
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25173
Summary: No sound in menus/game play in Call Of Duty : Black
Ops
Product: Wine
Version: 1.3.7
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: directx-dsound
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: oneofone(a)gmail.com
Created an attachment (id=31938)
--> (http://bugs.winehq.org/attachment.cgi?id=31938)
WINEDEBUG=+dsound
It's not http://bugs.winehq.org/show_bug.cgi?id=16942 as far as I can tell, I
tried everything.
Clean prefix, winver=windows7, disabled mmdevapi.
When I tried native dsound I lost the sound in the cut scenes.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=36076
Bug ID: 36076
Summary: Storm crashes during startup
Product: Wine
Version: 1.7.17
Hardware: x86
URL: http://store.steampowered.com/app/231020/
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: madewokherd(a)gmail.com
While loading the title screen, Storm crashes with the following output:
s (x86)\Steam\steamapps\common\Storm\StormExe\StormTheGame.exe:
../../../dlls/d3d9/vertexdeclaration.c:306:
unsafe_impl_from_IDirect3DVertexDeclaration9: Assertion `iface->lpVtbl ==
&d3d9_vertex_declaration_vtbl' failed.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=11558
Summary: Problem setting resolution in Neverwinter Nights 2
Product: Wine
Version: 0.9.54.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-ddraw
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: torbm(a)yahoo.com
When starting Neverwinter Nights 2 in fullscreen in-game settings for
resolution is ignored and always defaults to 1400x1050 (witch is not a valid
resolution in x-org.conf but happens anyway). There is no in-game way of
changing this resolution either.
I have found that I can change the games resolution by alt-tab out of the game
and set the desired resolution in nvidia x server configuration tool and then
alt-tab back into the game. I use Kubuntu (Kde) and this way of fixing the
problem has been reported by another user not to work with his gnome desktop.
We are both at version 7.10 of (K)Ubuntu.
Neverwinter Nights 2 w/Mask of the Betrayer expansion, patched to version
1.11.1152
Bug has been evident since I strated fiddling with this in version .52 of wine
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21253
Summary: Armed Assault 2 does not render graphics correctly.
Product: Wine
Version: 1.1.35
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: igor(a)bespin.net.ru
Created an attachment (id=25549)
--> (http://bugs.winehq.org/attachment.cgi?id=25549)
armed assault 2 log
Armed Assault 2 does not render graphics correct. Many graphical bugs and
artifacts appear on screen. Textures does not render at all.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=36077
Bug ID: 36077
Summary: Roogoo fails to show guide circles
Product: Wine
Version: 1.7.17
Hardware: x86
URL: http://store.steampowered.com/app/38210/
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: madewokherd(a)gmail.com
On Windows, Roogoo displays a ring of yellow.. glowy things showing where the
current blocks will fall, as in this screenshot:
http://cdn.akamai.steamstatic.com/steam/apps/38210/ss_ef3369cea683d8b181b8b…
On Wine, that ring does not appear.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23483
Summary: Singularity: zooming with sniper rifle hangs for a
couple seconds
Product: Wine
Version: 1.2-rc6
Platform: x86
OS/Version: Linux
Status: NEW
Severity: trivial
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Created an attachment (id=29306)
--> (http://bugs.winehq.org/attachment.cgi?id=29306)
save game in front of sniper
I'll attach a save game that puts you right in front of a sniper. Simply walk
forward, swap weapons with 'R', then zoom by holding right mouse button. The
scope will take over the screen, but hangs for a second or two before the scope
fills your screen.
Terminal shows:
fixme:d3d_surface:IWineD3DSurfaceImpl_LoadLocation 0x1d67a8: Downloading rgb
texture to reload it as srgb
fixme:d3d_surface:IWineD3DSurfaceImpl_LoadLocation 0x19c25628: Downloading rgb
texture to reload it as srgb
fixme:d3d_surface:IWineD3DSurfaceImpl_LoadLocation 0x1d67a8: Downloading rgb
texture to reload it as srgb
(which are there when running the game anyway), but canceling the game right
after the slowdown shows:
fixme:d3d_surface:IWineD3DVolumeImpl_LockBox (0x1a0a8268) : pBox=(nil) stub
which stands out from the rest...
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.