wine-bugs November 2015

wine-bugs@winehq.org

1 participants
7944 discussions

[Bug 13191] New: Trackmania Nations Forever doesn't work with PC2/ 3 shaders or with bloom-effect
by wine-bugs＠winehq.org 30 Jun '16

30 Jun '16

http://bugs.winehq.org/show_bug.cgi?id=13191 Summary: Trackmania Nations Forever doesn't work with PC2/3 shaders or with bloom-effect Product: Wine Version: 1.0-rc1 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: directx-d3d AssignedTo: wine-bugs(a)winehq.org ReportedBy: ape3000(a)gmail.com When I try to enable PC2 or PC3 shaders in Trackmania Nations Forever configuration and then play the game it doesn't work. The menus are drawn as solid black boxes. PC0(off?) and PC1 works fine. When I enable bloom-effect, it will add some annoying white bars to everywhere with bright light. So there is just white bars instead of the correct effect. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 10

[Bug 28875] New: NullDC 1.0.4 r450: NullDC starts but graphics fail to load.
by wine-bugs＠winehq.org 30 Jun '16

30 Jun '16

http://bugs.winehq.org/show_bug.cgi?id=28875 Bug #: 28875 Summary: NullDC 1.0.4 r450: NullDC starts but graphics fail to load. Product: Wine Version: 1.1.31 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: dredgingthelake(a)gmail.com Classification: Unclassified Created attachment 37099 --> http://bugs.winehq.org/attachment.cgi?id=37099 NullDC terminal output The Dreamcast emulator, NullDC 1.0.4 r450, starts but shortly crashes with the wine popup error message. Application continues with audio running in background, but no graphics can be seen. Requires vcrun2010 to get to this point. Also tested with and without "winetricks d3dx9". Audio doesn't run in background without d3dx9 (strangely enough) but no change in graphical output. The older nulldc-1.0.3 version works fine. System: Gentoo ~AMD64 Nvidia GTX275 (290.03 drivers) Wine 1.3.31 and wine 1.2 tested -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 10

[Bug 34196] New: Cannot shown correct Chinese characters in Youdao dictionary
by wine-bugs＠winehq.org 29 Jun '16

29 Jun '16

http://bugs.winehq.org/show_bug.cgi?id=34196 Bug #: 34196 Summary: Cannot shown correct Chinese characters in Youdao dictionary Product: Wine Version: 1.6-rc5 Platform: x86-64 URL: http://forum.ubuntu.org.cn/viewtopic.php?f=121&t=44688 6&p=3021652#p3021652 OS/Version: Linux Status: UNCONFIRMED Severity: critical Priority: P2 Component: fonts AssignedTo: wine-bugs(a)winehq.org ReportedBy: i2000s(a)hotmail.com Classification: Unclassified In a Ubuntu 12.04 machine, I used the workaround in bug34157 (turned out to be "resolve as INVALID"), and found some more bugs, maybe. The most critical problem for me is the ugly show of Chinese characters and English letters. In some cases, both Chinese characters and English letters are shown up correctly. In some other places, some Chinese characters and English letters was shown as squares or random characters. Especially in the "word book" interface, all Chinese characters and possibly some English letters from the official dictionary source are shown as squares, while all self-defined input are correctly shown up. I guess this problem is related to some font setting in Wine 1.6. I have posted the screen snapshoots here: http://forum.ubuntu.org.cn/viewtopic.php?f=121&t=446886 Let me know if you need more information. Thanks. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 8

[Bug 20435] New: Barnes and Noble EReader crashes on startup
by wine-bugs＠winehq.org 29 Jun '16

29 Jun '16

http://bugs.winehq.org/show_bug.cgi?id=20435 Summary: Barnes and Noble EReader crashes on startup Product: Wine Version: 1.1.31 Platform: PC OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: ender8282(a)yahoo.com Created an attachment (id=24254) --> (http://bugs.winehq.org/attachment.cgi?id=24254) Debugger output Wine crashes when trying to run the Barnes and Noble ereader. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 20

[Bug 39303] New: Cannot copy schematics between different windows / ltspice
by wine-bugs＠winehq.org 29 Jun '16

29 Jun '16

https://bugs.winehq.org/show_bug.cgi?id=39303 Bug ID: 39303 Summary: Cannot copy schematics between different windows / ltspice Product: Wine Version: 1.7.51 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: dieter.jurzitza(a)t-online.de Distribution: --- Trying to copy parts or an entire schematic between two schematics in two windows from within ltspice does not work. I can easily select components to copy, I can copy them within one single schematic, but I cannot copy them between two different schematics in a single ltspice instance (what works without issues using plain windows, but who is using plain windows :-)) Thank you for looking into this, take care Dieter Jurzitza -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 5

[Bug 29052] New: Incorrect handling of lit vertices causes models to render black in The Longest Journey
by wine-bugs＠winehq.org 28 Jun '16

28 Jun '16

http://bugs.winehq.org/show_bug.cgi?id=29052 Bug #: 29052 Summary: Incorrect handling of lit vertices causes models to render black in The Longest Journey Product: Wine Version: 1.3.32 Platform: x86 URL: http://games.softpedia.com/get/Games-Demo/The-Longest- Journey-161-Demo.shtml OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-ddraw AssignedTo: wine-bugs(a)winehq.org ReportedBy: octavian.voicu(a)gmail.com Classification: Unclassified Created attachment 37430 --> http://bugs.winehq.org/attachment.cgi?id=37430 Patch to fix issue with black rendered characters. IDirect3DDevice2 and IDirect3DDevice3 handle lighting differently than IDirect3DDevice7. Specifically, vertices which have colors but no normals (like D3DVT_LVERTEX or D3DFVF_LVERTEX) should bypass lighting calculations in the older interfaces. Wine handles them like in IDirect3DDevice7, rendering them black. This makes the models in the game The Longest Journey render black. I wrote a series of tests that I submitted to wine-patches, but they need a bit more refactoring to go in. Links to relevant patches from the series are below: http://source.winehq.org/patches/data/80669 http://source.winehq.org/patches/data/80673 http://source.winehq.org/patches/data/80670 I'm attaching a patch that fixes these issues, but I need to get the tests in before submitting it. It also needs a bit more thought on how older interfaces should handle render states that were introduced in later version of Direct3D (like D3DRS_LIGHTING). This patch only fixes the issue with the black rendered characters. There is another issue that makes characters only render partially, which is tracked in http://bugs.winehq.org/show_bug.cgi?id=11819. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 19

[Bug 35802] New: OneNote 2013 installer needs KERNEL32.dll.SetWaitableTimerEx
by wine-bugs＠winehq.org 28 Jun '16

28 Jun '16

http://bugs.winehq.org/show_bug.cgi?id=35802 Bug ID: 35802 Summary: OneNote 2013 installer needs KERNEL32.dll.SetWaitableTimerEx Product: Wine Version: 1.7.14 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: kernel32 Assignee: wine-bugs(a)winehq.org Reporter: hberntsen+winehq(a)gmail.com Created attachment 47798 --> http://bugs.winehq.org/attachment.cgi?id=47798 the trace of the x86 crash When running the OneNote 2013 installer, it crashes (see log). You can download the free installer from http://www.onenote.com/Download. The sha1sum of mine is cca75f8bbeaaa8d4d060c3d9edae28b3e345a82b. The download page forwarded me to http://www.onenote.com/Download/win32/x86/en-US (so 32 bit) but also the 64 bit from http://www.onenote.com/Download/win32/x64/en-US with sha1sum 18031525048a5a8f02789e24cb9c5c104ccf6488 crashes with a missing SetWaitableTimerEx. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 9

[Bug 34794] New: SolidWorks 2010: Error message at assigning material in manager
by wine-bugs＠winehq.org 25 Jun '16

25 Jun '16

http://bugs.winehq.org/show_bug.cgi?id=34794 Bug #: 34794 Summary: SolidWorks 2010: Error message at assigning material in manager Product: Wine Version: 1.7.4 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: msxml4 AssignedTo: wine-bugs(a)winehq.org ReportedBy: lukasz.wojnilowicz(a)gmail.com Classification: Unclassified Created attachment 46400 --> http://bugs.winehq.org/attachment.cgi?id=46400 Error message Steps to reproduce: 1) remove ~/.wine 2) winetricks vcrun2005 vcrun2008 mfc40 dotnet30 3) install SolidWorks 2010 4) start SolidWorks 2010 5) create new part 6) RMB on material 7) choose "edit material" 8) choose any material and click "apply" Behaviour: Error message (see attachment). Material changes properly though. Expected behaviour: No error message. Error message translation: Failed to save following database, returning to previous database now. There may be no last modifications. Terminal output: fixme:msxml:domdoc_get_url (0x7ee3cd0)->(0x33e504) fixme:msxml:schema_cache_QueryInterface interface {00000126-0000-0000-c000-000000000046} not implemented I/O warning : failed to load external entity "colorswatch.xsd" err:msxml:Schema_parse error code 3004: element decl. 'swatchcolor', attribute 'type': The QName value '{http://www.solidworks.com/sldcolorswatch}opticalcolor' does not resolve to a(n) type definition. fixme:msxml:cache_entry_from_xsd_doc failed to parse doc fixme:msxml:domdoc_putref_schemas (0x7fb8110)->({VT_DISPATCH: 0x7fb8210}): semi-stub fixme:msxml:domdoc_get_parseError (0x7fb812c)->(0x33e4c4): creating a dummy parseError fixme:msxml:domdoc_get_url (0x7ee3cd0)->(0x33e55c) fixme:msxml:schema_cache_QueryInterface interface {00000126-0000-0000-c000-000000000046} not implemented I/O warning : failed to load external entity "colorswatch.xsd" err:msxml:Schema_parse error code 3004: element decl. 'swatchcolor', attribute 'type': The QName value '{http://www.solidworks.com/sldcolorswatch}opticalcolor' does not resolve to a(n) type definition. fixme:msxml:cache_entry_from_xsd_doc failed to parse doc fixme:msxml:domdoc_putref_schemas (0x7fc91b0)->({VT_DISPATCH: 0x7fc92b0}): semi-stub fixme:msxml:domdoc_get_parseError (0x7fc91cc)->(0x33e51c): creating a dummy parseError -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 10

[Bug 39621] New: TeamViewer 11 activating menu shows it's content with large offset
by wine-bugs＠winehq.org 25 Jun '16

25 Jun '16

https://bugs.winehq.org/show_bug.cgi?id=39621 Bug ID: 39621 Summary: TeamViewer 11 activating menu shows it's content with large offset Product: Wine Version: 1.7.55 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: trivial Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: sasha969(a)hotmail.com Distribution: --- TeamViewer 11 activating menu shows it's content with large offset. Menus work fine just content is shown around middle of window. Could not get image because Print Screen in Linux Mint 17.2 Cinnamon auto closes menu before taking image. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 1

[Bug 17098] New: Allow using iso images (via fuseiso) in drives setup @ winecfg.
by wine-bugs＠winehq.org 25 Jun '16

25 Jun '16

http://bugs.winehq.org/show_bug.cgi?id=17098 Summary: Allow using iso images (via fuseiso) in drives setup @ winecfg. Product: Wine Version: 1.1.13 Platform: Other OS/Version: other Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: chalkerx(a)gmail.com To mount an iso image to wine one should create a mountpoint, mount it manually there, and use wincfg to point wine to that directory. After reboot it must be done again (the mounting part). If fuseiso in installed, it could be simplified to the user by allowing to point to an image file in winecfg, auto creating a drive_* folder and mounting an iso there via fuseiso on wine startup and unmounting on wine shutdown. This would allow user to point a drive to an iso directly from gui and just once. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

1 9

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-bugs November 2015