https://bugs.winehq.org/show_bug.cgi?id=40816
Bug ID: 40816
Summary: Webrotate (FREE) application hangs during installation
Product: Wine
Version: 1.9.12
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: bob.mt.wya(a)gmail.com
Distribution: ---
Created attachment 54761
--> https://bugs.winehq.org/attachment.cgi?id=54761
WINEDEBUG=+relay,+seh,+tid console output (truncated)
Installation of this application hangs after pressing the INSTALL button. I've
not dug through the trace to see what's going wrong - but it's not immediately
obvious what (Wine) component is at fault.
The last few lines of the console trace repeat ad infinitum (so I've truncated
the attached version):
000d:Call ntdll.RtlAllocateHeap(00110000,00000000,00000014) ret=7efeb721
000d:Ret ntdll.RtlAllocateHeap() retval=00179098 ret=7efeb721
000d:Call ntdll.RtlAllocateHeap(00110000,00000000,00000016) ret=7efeb44b
000d:Ret ntdll.RtlAllocateHeap() retval=001790b8 ret=7efeb44b
000d:Call ntdll.RtlAllocateHeap(00110000,00000000,00000006) ret=7efeb44b
000d:Ret ntdll.RtlAllocateHeap() retval=001790d8 ret=7efeb44b
000d:Call ntdll.RtlAllocateHeap(00110000,00000000,00000006) ret=7efeb44b
000d:Ret ntdll.RtlAllocateHeap() retval=001790f0 ret=7efeb44b
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40787
Bug ID: 40787
Summary: POILoader quits right after start
Product: Wine
Version: 1.9.12
Hardware: x86
URL: http://www.garmin.com/us/maps/poiloader
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: ladislav.laska(a)gmail.com
Distribution: ArchLinux
The Garmin POI Loader quits after start, without an error message. This might
be related to bug #22544, but it's an old bug, and I'm not really sure if it's
regression. I've tried testing this with the 1.7.11 as suggested, but the
result is the same.
Installer works (and required mono). Whenever I start the application, I get a
few messages on terminal, the POI Loader initial screen shows up for a few
seconds, but is non-responsive, and crashes promptly, without further error:
krakonos@wallaby ~/[...]/POI Loader $ wine POILoader
fixme:dbghelp:elf_search_auxv can't find symbol in module
fixme:dbghelp:elf_search_auxv can't find symbol in module
fixme:dbghelp:elf_search_auxv can't find symbol in module
krakonos@wallaby ~/[...]/POI Loader $ wine --version
wine-1.9.12
The wine I'm using is a version from Arch repository.
I'd be glad to provide more information, but I have no idea where to look for
problems.
Download is available here: http://www.garmin.com/us/maps/poiloader
Tested with POI Loader 2.7.3 (the latest available)
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34928
Bug #: 34928
Summary: X Rebirth only (re)draws HUD Elements
Product: Wine
Version: 1.7.6
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: skython(a)web.de
Classification: Unclassified
Created attachment 46545
--> http://bugs.winehq.org/attachment.cgi?id=46545
Screenshot 1: Rendering bugs after starting a new free game.
The game doesn't renders everything except the HUD. When you start a new free
game the screen becomes black and only the HUD elements are visible.
If any of the HUD elements is moving, you see them being 'copied' over the
black background. The attached screenshots are showing this behaviour.
If you alter some graphics settings (for example antialiasing) while ingame,
you can see the game rendering everything just fine for a single frame. But
then again the rendered scene doesn't redraw and HUD is being copied again. You
can see this behaviour on the second screenshot.
The terminal repeatedly says:
err:d3d:wined3d_debug_callback 0x193ef0: "GL_INVALID_OPERATION error generated.
Buffer is mapped.".
err:d3d_draw:drawStridedFast >>>>>>>>>>>>>>>>> GL_INVALID_OPERATION (0x502)
from glDrawElementsBaseVertex @ ../../../wine/dlls/wined3d/drawprim.c / 64
I'm using Archlinux and the current Wine version 1.7.6
I already tried altering several rendering settings using winetricks. No luck
so far. Any help is appreciated
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40725
Bug ID: 40725
Summary: 8-bit Armies crashes on start (32-bit prefix, Windows
7 mode)
Product: Wine
Version: 1.9.11
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: fjfrackiewicz(a)gmail.com
Distribution: ---
Created attachment 54631
--> https://bugs.winehq.org/attachment.cgi?id=54631
Terminal output for Wine 1.9.11 Staging no CSMT
I am attempting to run this game in a clean 32-bit prefix and it crashes while
loading.
Running the command "wine ClientG.exe" gets me a splash screen and opens up a
very tiny square which I assume is the game's window. After a few seconds the
game then crashes.
I have checked that ClientG.exe, the game's executable, is in fact a 32-bit
file:
file ClientG.exe
ClientG.exe: PE32 executable (GUI) Intel 80386, for MS Windows
I am attempting to run the game in Windows 7 mode as it does not support
Windows XP.
I have attached the terminal output as the game loads then crashes. I am using
Wine 1.9.11 Staging.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40920
Bug ID: 40920
Summary: Into The Stars (UE4 game) crashes while loading with
SwapChain->GetFullscreenState error
Product: Wine
Version: 1.9.13
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: fjfrackiewicz(a)gmail.com
Distribution: ---
Created attachment 55026
--> https://bugs.winehq.org/attachment.cgi?id=55026
Terminal output Wine 1.9.13-144-g9729d15 Windows 7 mode
The Unreal Engine 4 game, Into The Stars crashes while loading in a clean
Windows 7 prefix.
I am attempting to run the game on an Nvidia GTX 970 using the proprietary
drivers (367.27) in Wine 1.9.13-144-g9729d15.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30581
Bug #: 30581
Summary: Dialog windows can get hidden by the main window in
IDA Free 5.0
Product: Wine
Version: 1.5.3
Platform: x86
URL: http://www.hex-rays.com/products/ida/support/download_
freeware.shtml
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: markk(a)clara.co.uk
Classification: Unclassified
IDA Pro is an interactive disassembler. A freeware version of IDA 5.0 can be
downloaded from
http://www.hex-rays.com/products/ida/support/download_freeware.shtml
I tested IDA Free with Wine 1.5.3 under Lubuntu 11.10, which uses the Openbox
window manager.
When "Allow the window manager to control the windows" is enabled in winecfg,
dialog boxes can get hidden behind the main window. The dialogs are modal, so
the main window doesn't accept any input while a dialog is open. If you
accidentally click in the main window while a dialog is open, the dialog
disappears but the main window does not accept any input.
To reproduce:
- Use winecfg to disable virtual desktop mode and enable "Allow the window
manager to control the windows" if necessary; those are the default settings.
- Download and run the IDA Free 5.0 installer.
- Run the program. Click OK at the About dialog and Go in the Welcome to IDA!
window.
- The maximised main window opens. Bring up a dialog box, e.g. by selecting
Help-> About program... or File -> Open...
- When the dialog opens, click in the main window. The dialog window disappears
behind the main window. (You can reveal it by un-maximising the main window and
moving it out of the way.)
For what it's worth, this problem doesn't happen with the IDA Pro 6.2 demo, but
that uses different GUI code (QT?).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32495
Bug #: 32495
Summary: Incorrect behavior in ScriptGetLogicalWidths() /
ScriptApplyLogicalWidth() (buffer overrun)
Product: Wine
Version: 1.5.19
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: usp10
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: disposable593-wine(a)yahoo.com
Classification: Unclassified
Currently, ScriptGetLogicalWidths() and ScriptApplyLogicalWidth() are
incorrectly implemented, leading to wrong glyph positioning in one of my
applications.
**ScriptGetLogicalWidths(): The current implementation simply copies the input
to the output array, incorrectly assuming nbchar==nbglyphs. If there are fewer
glyphs than characters, this causes a buffer overrun, potentially leading to
application crashes. (The problem does and will become more prevalent as the
implementation of shaping is improved over time.)
**ScriptApplyLogicalWidths(): The functions fails to apply justification and
simply returns the unjustified widths.
Below I include what I believe are correct implementations. I have taken care
that the results agree with those returned by the Microsoft implementations. (I
have never seen or been in contact with the original Microsoft code, though, so
the following code is "clean" and may be used for any purpose.)
HRESULT WINAPI ScriptGetLogicalWidths(const SCRIPT_ANALYSIS *sa, int nbchars,
int nbglyphs,
const int *glyph_width, const WORD
*log_clust,
const SCRIPT_VISATTR *sva, int *widths)
{
int rtl, i;
// TRACE("(%p, %d, %d, %p, %p, %p, %p)\n",
// sa, nbchars, nbglyphs, glyph_width, log_clust, sva, widths);
rtl = sa->fRTL && !sa->fLogicalOrder;
for (i = 0; i < nbchars; )
{
int w = 0, i2, j, j2;
j = log_clust[i];
i2 = i;
do i2++; while (i2 < nbchars && log_clust[i2] == j);
j2 = i2 < nbchars ? log_clust[i2] : rtl? -1 : nbglyphs;
for ( ; j != j2; rtl? j--:j++)
w += glyph_width[j];
for ( ; i < i2; i++)
w -= widths[i] = w / (i2-i);
}
return S_OK;
}
HRESULT WINAPI ScriptApplyLogicalWidth(const int *dx, int num_chars, int
num_glyphs,
const WORD *log_clust, const
SCRIPT_VISATTR *sva,
const int *advance, const
SCRIPT_ANALYSIS *sa,
ABC *abc, int *justify)
{
int rtl, i;
// FIXME("(%p, %d, %d, %p, %p, %p, %p, %p, %p)\n",
// dx, num_chars, num_glyphs, log_clust, sva, advance, sa, abc,
justify);
rtl = sa->fRTL && !sa->fLogicalOrder;
if (abc) abc->abcB = - abc->abcA - abc->abcC;
for (i = 0; i < num_chars; )
{
int w = 0, j, j1, j2;
j1 = log_clust[i];
do w += dx[i++]; while (i < num_chars && log_clust[i] == j1);
j2 = i < num_chars ? log_clust[i] : rtl? -1 : num_glyphs;
for (j = j1; j != j2; rtl? j--:j++)
w -= advance[j];
for (j = j1; j != j2; rtl? j--:j++)
{
w -= justify[j] = w / (rtl? j-j2:j2-j);
justify[j] += advance[j];
if (abc) abc->abcB += justify[j];
}
}
return S_OK;
}
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19452
Summary: QuickVerse 2009 crashes when attempting to open a book
Product: Wine
Version: 1.1.26
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: firesword14(a)yahoo.com
Created an attachment (id=22597)
--> (http://bugs.winehq.org/attachment.cgi?id=22597)
Log of what happened, then dump
Wine crashes when I double click on a bible or book to open.
This is my first bug report, if need more information, please ask.
First issue in log: shdocvw:PersistStreamInit_InitNew
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34662
Bug #: 34662
Summary: Unhandled exception: page fault on read access to
0x0000001c in 32-bit code (0x1002faf3)
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: rjchaves93(a)gmail.com
Classification: Unclassified
Created attachment 46206
--> http://bugs.winehq.org/attachment.cgi?id=46206
backtrace generated by wine
on a screen change a game caught the wine.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30415
Bug #: 30415
Summary: wineserver leaks memory when running Crysis Wars
dedicated server
Product: Wine
Version: 1.4
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: liquitsnake(a)gmx.net
Classification: Unclassified
The Crysis Wars dedicated server, especially with the MWLL mod and many
players, leaks a lot of memory. 5 to 10 MB/minute are not unusual.
This happens on Windows too, can't be fixed and is not subject of this bug
report.
On Wine however, the wineserver process leaks memory alongside the Crysis Wars
process! In fact, wineserver leaks even faster, more than doubling the memory
load on my machine at a given time.
Wineserver's leak is the subject of this bug report.
Wineserver will not release its memory when Crysis quits. In fact, the only way
to do that is to quit wineserver, either by killing it, or by closing all Wine
applications and waiting for wineserver to quit on its own.
I'll be happy to provide any info needed to help debug this. I don't know where
to even start though.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.