http://bugs.winehq.org/show_bug.cgi?id=35027
Bug #: 35027
Summary: unimplemented function
KERNEL32.dll.CreateProcessInternalW
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: kernel32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: l12436(a)yahoo.com.tw
Classification: Unclassified
Created attachment 46688
--> http://bugs.winehq.org/attachment.cgi?id=46688
log
the CreateProcessInternalW in kernel32.dll seems not implemented.
cause a execution file crash.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33381
Bug #: 33381
Summary: Mayhem Triple renders too small
Product: Wine
Version: 1.5.25
Platform: x86
URL: http://www.sniperdiplomat.com/MayhemTriple.rar
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: madewokherd(a)gmail.com
Classification: Unclassified
Output only occupies about a third of the window. Mouse behaves as if it were
scaled to fit.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39144
Bug ID: 39144
Summary: SpinTires tech demo wrong rendering after changing
screen resolution
Product: Wine
Version: 1.7.50
Hardware: x86-64
URL: http://oovee.chicsystems.net/SpinTiresInstall_060613.z
ip
OS: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: andrey.goosev(a)gmail.com
Distribution: ---
Created attachment 52170
--> https://bugs.winehq.org/attachment.cgi?id=52170
screenshot
Steps to reproduce:
1. Set screen resolution in winecfg to 800x600
2. Use a native d3dx9_36
3. Run tech demo and set screen resolution to 1024x768
4. You should get the result as on screenshot
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=36720
Bug ID: 36720
Summary: LCMapString with the parameter NORM_IGNORENONSPACE
does not remove diacritics
Product: Wine
Version: 1.6.2
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: kernel32
Assignee: wine-bugs(a)winehq.org
Reporter: mterrisse(a)free.fr
Created attachment 48766
--> http://bugs.winehq.org/attachment.cgi?id=48766
Source and binary to reproduce a bug in Wine implementation of LCMapString
Hello,
Working on Windows I use LCMapString with the parameter NORM_IGNORENONSPACE to
remove diacritics (e.g. accents) from a string and it works fine.
But I tested on Wine (1.6.2, Ubuntu) and it does not remove the diacritics from
the string (the string is unchanged).
This bug impacts this software
http://appdb.winehq.org/objectManager.php?sClass=application&iId=6654
On the next version of the product, a client running on Wine cannot connect to
a server running on Windows if the login contains diacritics.
I attach a small project to reproduce the problem. It is written in Pascal
(Delphi) but can be easily converted to another language.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33383
Bug #: 33383
Summary: Hiding application to Mac OS X Dock causes crash.
Product: Wine
Version: 1.5.28
Platform: x86-64
OS/Version: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: eliturner(a)me.com
Classification: Unclassified
Now that the Mac OS X driver is implemented when hiding any application to the
Dock (via command+h) it crashes Wine. I'm using the latest "wine-revel" package
from Macports.
Thanks!
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32224
Bug #: 32224
Summary: LTspice: selected text/component after Ctrl+F not
highlighted
Product: Wine
Version: unspecified
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: testelor(a)yahoo.com
Classification: Unclassified
Steps to reproduce:
1) Download and install LTspice -
http://ltspice.linear.com/software/LTspiceIV.exe
2) Run LTspice using:
$ wine scad3.exe -nowine
3) Create a new schematic, press 'R' (resistor), for example, and place
it twice by clicking. There should be R1 and R2 on the schematic.
4) Press Ctrl+F and search for "r2", no quotes, it should be highlighted in
yellow, but they're not.
Side note:
- create a new schematic, press F2 to bring up the device list.
- select current, place it on the schematic
- right-click on it and type '1', no quotes, then OK
- press 'R', place it next to the current source, in parallel
- right click on it and replace "R" with '1', no quotes, then OK
- press 'G' and place ground on the lower pins of both components
- press F3 and draw a net by clicking on the unconnected current source's pin,
then on the resistor's
- press 'S' and write ".tran 1", no quotes, don't forget the dot, place it on
the schematic
- in the toolbar, press the 'running man' button, or right-click on the
schematic and choose "run"
- it should be almost instant, a new empty window will pop up, above
- move the mouse cursor over the resistor until the cursor changes into a
current-clamp (something black with a red arrow), then click once to display
the current through the resistor
- in the newly created window, there will be a trace displayed and a label at
the top, reading I(R1)
Alt+left-clicking on the label will highlight the resistor. That's how it
should look like after Ctrl+F. Alternatively, you can just run "wine
scad3.exe", no "-nowine" switch, and repeat the 4 steps in the beginning.
No screenshot as it doesn't make sense to show what doesn't happen...
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=28282
Summary: Sound constantly crackling in StarCraft II
Product: Wine
Version: 1.3.26
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: pitlicek(a)gmail.com
Sound is crackling since 1.3.26 (and still does in 27) and console is spammed
with "err:alsa:wine_snd_pcm_recover underrun occurred".
Using ALSA in Wine (PulseAudio in Ubuntu 11.04), full acceleration (changing to
emulation doesn't fix it), 48 kHz (my SoundBlaster can handle it, and again,
change makes no difference), 16 bps. Using OSS and padsp results in no sound at
all.
But it's still better than no sound in 1.3.25 after mmdevapi
rewrite/implementation. ;)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41163
Bug ID: 41163
Summary: Minimum memory for Nvidia GTX 1060 should be 3GB
Product: Wine
Version: 1.9.16
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: markk(a)clara.co.uk
Distribution: ---
In dlls/wined3d/directx.c a comment says
"The amount of video memory stored in the gpu description table is the minimum
amount of video memory "found on a board containing a specific GPU."
The line for Nvidia GTX 1060:
{HW_VENDOR_NVIDIA, CARD_NVIDIA_GEFORCE_GTX1060, "NVIDIA GeForce GTX
1060", DRIVER_NVIDIA_GEFORCE8, 6144},
6144 should probably be changed to 3072, since a 3GB version of the GTX 1060
(with slightly cut-down GPU) has been announced:
http://www.eurogamer.net/articles/digitalfoundry-2016-nvidia-unveils-cut-do…
Either that, or a separate entry for the 3GB model should be added.
Also, in dlls/wined3d/wined3d_private.h is the PCI ID for the GTX 1060:
CARD_NVIDIA_GEFORCE_GTX1060 = 0x1c03,
Nvidia uses 0x1C02 for the 3GB GTX 1060, according to the Windows driver INF
file:
NVIDIA_DEV.1C02.8438.19DA = "NVIDIA GeForce GTX 1060 3GB"
NVIDIA_DEV.1C03.9438.19DA = "NVIDIA GeForce GTX 1060 6GB"
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=31387
Bug #: 31387
Summary: Helicopter's tail prop is sometimes partly black in
GTAIV
Product: Wine
Version: 1.5.9
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: b7.10110111(a)gmail.com
Classification: Unclassified
Created attachment 41247
--> http://bugs.winehq.org/attachment.cgi?id=41247
Screenshot
This bug is similar to bug 21197, but this particular thing wasn't fixed by the
commit which did fix that bug. See the screenshot. Symptoms are the same - one
of the propeller blades is black with black pixels around.
How to reproduce once in the game:
1. Find/spawn Police Maverick helicopter
2. Get inside it
3. Take off to be about 10 m above ground
4. Press 'S' and hold it so that helicopter punches the ground
5. See the artifact appear
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.