https://bugs.winehq.org/show_bug.cgi?id=41391
Bug ID: 41391
Summary: N1MM+ Logger crashes when trying to configure macro on
the Digital Interface Soundcard window.
Product: Wine
Version: 1.9.19
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mscoree
Assignee: wine-bugs(a)winehq.org
Reporter: landon(a)mccordscvs.com
Distribution: ---
Created attachment 55746
--> https://bugs.winehq.org/attachment.cgi?id=55746
3 Exceptions, Execution and Preformance Tracing, and Backtrace
Installed is the Latest version of N1MM+ Logger currently 1.0.5924.
Ubuntu 16.04
If you right click on one of the white unconfigured Macro Buttons at the bottom
of the Digital Interface Soundcard window the program will throw an exceptions.
(There are 24 of these buttons.) The program should open the Digital Setup
window.
When the program throws the exceptions it dose not usually crash. It normally
throws 3 exceptions. If you dismiss these the program can be used like normal.
But the macros still cannon be configured.
The Backtrack I included happened when I tried to copy and paste the errors.
Don't know if its relevant.
If you want to install program for troubleshooting you will need to configure a
setting to get Digital Interface Soundcard window up. Goto Config->Configure
Ports, Mode .... Click on the Digital Modes tab and set Digital Interface 1 TU
Type to Soundcard. Click Ok. Then click Window->Digital Interface. To open
window in question.
Attached are the 3 exceptions throwed by the program. Program Execution and
performance tracing and the Backtrace that was caused by trying to copy and
paste the error.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42482
Bug ID: 42482
Summary: ONE-POS crashes when print previewing a Crystal Report
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: sanford.poon(a)gmail.com
Distribution: ---
Created attachment 57338
--> https://bugs.winehq.org/attachment.cgi?id=57338
error output from WINE (crash.log) and JIT crash logs (crashJIT.log)
Version 3.1.9.14 of the Freeware POS software (available for download after
free registration of an account at
https://hk.one-pos.com/download/member/setup.zip) installs and runs properly in
Lubuntu 16.10 on wine 2.1 and wine-gecko 2.21 with winetricks -q dotnet452 wmp9
jet40 mdac28 cjkfonts
Run with LC_ALL=zh_TW.UTF8 for proper display of Chinese characters, but
English interface works without this.
Access the analysis report function from the left menu and select any of the
available reports to open a print preview window, then the application crashes.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32767
Bug #: 32767
Summary: Word 2003 shows a document incorrectly
Product: Wine
Version: 1.5.22
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: b7.10110111(a)gmail.com
Classification: Unclassified
Created attachment 43259
--> http://bugs.winehq.org/attachment.cgi?id=43259
Test file
See test file. It doesn't show a bg image and some lines, showing only two
lines of all.
If I select gdiplus as native,builtin, it works almost OK (with a little
glitch).
I'll attach screenshots.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=43140
Bug ID: 43140
Summary: Crash with "Unhandled exception: page fault on read
access to 0x00000028 in 32-bit code (0x6c5e0efa)"
Product: Wine
Version: 2.9
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: alek.storm(a)gmail.com
Distribution: ---
Created attachment 58355
--> https://bugs.winehq.org/attachment.cgi?id=58355
Backtrace
Got the above error (full backtrace attached) upon starting a 32-bit .NET GUI
application. Unfortunately, since the program itself is proprietary (we get
from a vendor), I can't provide it, but I'm willing to answer any questions
about it or my environment.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=43460
Bug ID: 43460
Summary: Boson Exam Environment - Unable to run
Product: Wine
Version: 2.13
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: n.kane2898(a)gmail.com
Distribution: ---
Created attachment 58834
--> https://bugs.winehq.org/attachment.cgi?id=58834
Program error details and console output
Program crashes when trying to run it using desktop icon created during
installation or from console. My system is a 64 bit installation of openSUSE
tumbleweed(kernel: 4.11.8-2-default).
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21114
Summary: Chessbase products - antialiasing has no effect
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: jskartman(a)gmail.com
When turned on antialiasing the pieces are draw with the same quality as of
antialiasing off. The antialiasing has no effect.
You can use chessbase light to test.
http://www.chessbase.com/DOWNLOAD/cblight/index.asp
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=44324
Bug ID: 44324
Summary: Unhandled exception: page fault on read access to
0x01000000 in 32-bit code (0xf749a82b)
Product: Wine
Version: 2.0.1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: msvcrt
Assignee: wine-bugs(a)winehq.org
Reporter: linux(a)newwhitebear.net
Distribution: ---
Created attachment 60188
--> https://bugs.winehq.org/attachment.cgi?id=60188
backtrace
I'm opening old project of yWriter5.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35648
Bug ID: 35648
Summary: Anthem Room Correction 2 v1.0.1: crash when connecting
to A/V receiver in auto mode
Product: Wine
Version: 1.7.12
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: tristan.schmelcher(a)gmail.com
Created attachment 47607
--> http://bugs.winehq.org/attachment.cgi?id=47607
Console output
The application Anthem Room Correction 2 v1.0.1 crashes when trying to connect
to an A/V receiver if run in automatic mode (with "/Auto" specified on the
command line). The application also fails in manual mode at the same spot, but
it doesn't crash; instead it hangs with 100% CPU usage.
The console output with stack trace from the crash in automatic mode is
attached.
The application can be downloaded at
http://anthemav.com/downloads/ARC-2%20Setup.zip, but you must have an Anthem
A/V receiver in order to get this far in it. I am happy to carry out suggested
testing/debugging.
74dc2107ca936dddbd0fc6abbb2baf74e387c163 ARC-2 Setup.zip
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=36509
Bug ID: 36509
Summary: valgrind shows a potential leak in
mscoree/tests/debugging.c
Product: Wine
Version: 1.7.19
Hardware: x86
OS: Linux
Status: NEW
Keywords: download, source, testcase
Severity: normal
Priority: P2
Component: mscoree
Assignee: wine-bugs(a)winehq.org
Reporter: austinenglish(a)gmail.com
../../../tools/runtest -q -P wine -T ../../.. -M mscoree.dll -p
mscoree_test.exe.so debugging && touch debugging.ok
preloader: Warning: failed to reserve range 00110000-68000000
preloader: Warning: failed to reserve range 7f000000-82000000
/bin/sh: /usr/bin/egrep: No such file or directory
==9100== Find PDB file: /tmp/valgrind_petmp9100_2afae468 is empty
==9100== Warning: Missing or un-stat-able
/home/austin/.wine-valgrind/drive_c/windows/mono/mono-2.0/bin/libmono-2.0-x86.pdb
fixme:mscoree:CorDebug_Initialize stub 0x4aa1808
==9100== 52 bytes in 1 blocks are possibly lost in loss record 296 of 646
==9100== at 0x7BC4C6DF: notify_alloc (heap.c:255)
==9100== by 0x7BC50F23: RtlAllocateHeap (heap.c:1716)
==9100== by 0x62F2004: ???
==9100== by 0x62F4544: ???
==9100== by 0x62F4F5D: ???
==9100== by 0x62F9A9F: ???
==9100== by 0x4CA2FF1: test_createDebugger (debugging.c:450)
==9100== by 0x4CA3237: func_debugging (debugging.c:488)
==9100== by 0x4CA76F6: run_test (test.h:584)
==9100== by 0x4CA7AE5: main (test.h:654)
==9100==
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33406
Bug #: 33406
Summary: Archicad 15 selection fence and marquee doesn't show
correctly
Product: Wine
Version: unspecified
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: xsitian(a)gmail.com
Classification: Unclassified
Created attachment 44201
--> http://bugs.winehq.org/attachment.cgi?id=44201
screenshot compare for selection fence
Archicad 15 selection fence and marquee doesn't show correctly when use wine
buildin gdiplus.dll. If use windows native gdiplus.dll, it works correctly.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32310
Bug #: 32310
Summary: EVEMon needs
System.Net.NetworkInformation.NetworkChange
implementation
Product: Wine
Version: 1.5.18
Platform: x86
URL: http://evemon.battleclinic.com/
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: mscoree
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: madewokherd(a)gmail.com
Classification: Unclassified
To reproduce, install EVEMon without .NET, and try to run it.
It crashes on startup with an exception:
System.EntryPointNotFoundException: CreateNLSocket
at (wrapper managed-to-native)
System.Net.NetworkInformation.NetworkChange:CreateNLSocket ()
at System.Net.NetworkInformation.NetworkChange.EnsureSocket () [0x00000] in
<filename unknown>:0
at System.Net.NetworkInformation.NetworkChange.Register
(System.Net.NetworkInformation.NetworkAvailabilityChangedEventHandler d)
[0x00000] in <filename unknown>:0
at System.Net.NetworkInformation.NetworkChange.add_NetworkAvailabilityChanged
(System.Net.NetworkInformation.NetworkAvailabilityChangedEventHandler value)
[0x00000] in <filename unknown>:0
at EVEMon.Common.Net.NetworkMonitor.Initialize () [0x00000] in <filename
unknown>:0
at EVEMon.Common.EveMonClient.Initialize () [0x00000] in <filename unknown>:0
at EVEMon.Program.Main () [0x00000] in <filename unknown>:0
CreateNLSocket is an entry point into the MonoPosixHelper library. AFAICT it's
only implemented on Unix-like systems and would not be possible to implement on
Windows. So we need an alternative implementation of
System.Net.NetworkInformation.NetworkChange that's based on the Windows API.
Probably the NotifyAddrChange function could be used to detect changes, using
System.Threading.AutoResetEvent and ThreadPool.RegisterWaitForSingleObject to
get the event notification into the .NET world.
I think this would be a good introduction to Mono development, if anyone needs
one.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33690
Bug #: 33690
Summary: Microsoft SQL Server 2005 Express Edition: installer
window layout incorrect with builtin mono
Product: Wine
Version: 1.5.31
Platform: x86
URL: http://go.microsoft.com/fwlink/?linkid=65212
OS/Version: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: djelinski1(a)gmail.com
Classification: Unclassified
Created attachment 44606
--> http://bugs.winehq.org/attachment.cgi?id=44606
left is wine mono, right is native .NET
After fixing bug #33513, the installer displays another set of windows. There
are some problems with their layout:
- the initial size of the windows is different than when using native .NET. As
a result there's a gap between the interface elements and the right window
border, and some buttons on the bottom of the window are only partially
visible. Resizing the window does not unhide them.
- Label text does not wrap, it is clipped instead.
- also, the focus rectangle on buttons looks different.
Attaching screenshot showing the same windows with and without winetricks
dotnet20.
Prerequisites:
winetricks mspatcha
fix for bug 33513
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42442
Bug ID: 42442
Summary: Canon Digital Photo Professional 4.5 can't start
Product: Wine
Version: 2.1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: eneeen(a)gmail.com
Distribution: ---
Created attachment 57274
--> https://bugs.winehq.org/attachment.cgi?id=57274
console log from dpp startup
This is bug report related to:
https://bugs.winehq.org/show_bug.cgi?id=42423
I couldn't select wine-mono as component, but as @Dmitry Timoshkov stated it's
wine-mono related.
I've attached startup log from console, as there is no error message in GUI.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=23192
Summary: 2D graphics in Mathematica are not antialiased while
on Windows they are
Product: Wine
Version: 1.2-rc2
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: b7.10110111(a)gmail.com
To see this, try Plot[Sin[x],{x,-10,10}] in Windows and in Wine. Output in
Windows is antialiased while in wine it's jagged.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40810
Bug ID: 40810
Summary: Semcad X Verision 14 (64bit): crashes when opening a
2D plot
Product: Wine
Version: 1.9.12
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
Assignee: wine-bugs(a)winehq.org
Reporter: andreas.christ(a)runbox.com
Distribution: ---
I am trying to make Semcad X Version 14 run under wine64. This is a CAD program
for electromagnetic simulations.
The program installs, and most features seem to work. When viewing a simulation
result in a xy-plot window, Semcad X crashes with an error in a
gdiplus-function.
My system configuration is:
Wine build: wine-1.9.12 (Staging)
Platform: x86_64
Version: Windows XP
Host system: Linux
Host version: 4.5.0-0.bpo.2-amd64
Graphics driver: Nvidia 340.96
I first installed Semcad X using Wine 1.8 from the Jessie-backports and tried
with wine staging, but the crash in gdiplus I get seems to be the same. I made
sure gecko and mono were installed in Wine 1.8. (Wine staging upgraded them
when first starting the prefix with it.) I also installed the core fonts (later
all fonts) and vcrun2010 using winetricks. I also tried the native gdiplus
(64bit version), which also crashed.
When viewing a simulation result in the xy-viewer, the viewer window opens, and
the graph is drawn, but the window area where the text (axis labels) should
show up remains black. After a few seconds (or when clicking into the black
area), Semcad X crashes with the attached bug report.
In the terminal, the following messages show up before the crash (just pasting
in two of them):
fixme:gdiplus:units_to_pixels Unhandled unit type: 15
fixme:font:freetype_SelectFont Untranslated charset 105
The unit type and charset numbers vary.
The program is not available for free download and requires a special license
to run. Reproducing the error may therefore not be possible. Nevertheless, I
would greatly appreciate any support.
Andreas
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35680
Bug ID: 35680
Summary: Impossible to run DVDVideoSoft Free YouTube to MP3
Converter
Product: Wine
Version: 1.7.13
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: thomthomthom(a)ymail.com
It's impossible to run DVDVideoSoft Free YouTube to MP3 Converter.
Output:
$ wine FreeYouTubeToMP3Converter.exe
Unknown heap type: #GUlD
Unknown heap type: #Blop
Unhandled Exception:
System.TypeLoadException: Could not load type 'FreeAllDownload.Main' from
assembly 'FreeYouTubeToMP3Converter, Version=3.12.26.224, Culture=neutral,
PublicKeyToken=1f9a51e1f0f27a9a'.
at <PrivateImplementationDetails>{9294DE1F-C5EC-46B6-AD3E-640AF3B83387}.Main
() [0x00000] in <filename unknown>:0
[ERROR] FATAL UNHANDLED EXCEPTION: System.TypeLoadException: Could not load
type 'FreeAllDownload.Main' from assembly 'FreeYouTubeToMP3Converter,
Version=3.12.26.224, Culture=neutral, PublicKeyToken=1f9a51e1f0f27a9a'.
at <PrivateImplementationDetails>{9294DE1F-C5EC-46B6-AD3E-640AF3B83387}.Main
() [0x00000] in <filename unknown>:0
It's a clean .wine directory. No winetrick or something else ...
Thanks.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39455
Bug ID: 39455
Summary: Homeport crashes on execution
Product: Wine
Version: 1.7.52
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: axel.braun(a)gmx.de
Distribution: ---
Created attachment 52569
--> https://bugs.winehq.org/attachment.cgi?id=52569
Error log
Homeport is a software that can be downloaded for free from Garmin:
https://buy.garmin.com/en-US/US/prod64242.html
Installation works fine, but when the software is run, it crashes immediately
(see attachment)
Installed wine components on openSUSE 13.1
docb@T520:~> rpm -qa |grep wine
wine-32bit-1.7.52-486.1.x86_64
wine-gecko-2.40-49.1.noarch
wine-mono-4.5.6-5.1.noarch
wine-1.7.52-486.1.x86_64
wine-mp3-1.1.39-13.13.i586
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=43879
Bug ID: 43879
Summary: missing file for program - mscoree.dll
Product: Wine
Version: 2.0.2
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mscoree
Assignee: wine-bugs(a)winehq.org
Reporter: zaknafein_aurora(a)yahoo.com
Distribution: ---
I am trying to run Chummer via Wine, but I get an error about a missing
mscoree.dll file.
err:module:import_dll Library mscoree.dll (which is needed by
L"Z:\Users\<username>\desktop\chummer5\chummer5.exe") not found
err:module:LdrInitializeThunk Main exe initialization for
L"Z:\Users\<username>\desktop\chummer5\chummer5.exe" failed, status c0000135
Please help!
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=27197
Summary: Russian Fishing game not starting
Product: Wine
Version: 1.3.20
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mscoree
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: sir-lexa(a)yandex.ru
Russian Fishing game not starting. It just says:
fixme:mscoree:get_runtime_info unsupported startup flags 2
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37337
Bug ID: 37337
Summary: chem3d wont start
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: tedwaltmuf(a)yahoo.com
Created attachment 49651
--> https://bugs.winehq.org/attachment.cgi?id=49651
here is the last run log
my copy of chem3d wont start. i used winetricks for the dlls that were missing
according to the run.log
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26020
Summary: Miner Wars Demo: crashes on startup
Product: Wine
Version: 1.3.13
Platform: x86
URL: http://www.fileplanet.com/218230/210000/fileinfo/Miner
-Wars-Demo
OS/Version: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: mscoree
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
austin@aw21 ~/.wine/drive_c/Program Files/Miner Wars $ wine
MinerWarsLauncher.exe
Unhandled Exception: System.ArgumentException: invalid utf-16 sequence at
3340336 (missing surrogate head)
Parameter name: string
at (wrapper managed-to-native) System.Type:internal_from_name
(string,bool,bool)
at System.Type.GetType (System.String typeName) [0x00000] in <filename
unknown>:0
at .. (System.String ) [0x00000] in <filename unknown>:0
at .. (Int32 ) [0x00000] in <filename unknown>:0
. (System.String[] ) [0x00000] in <filename unknown>:0
Also exhibits bug 25192.
Appears to be a mono bug. If I use dotnet20 instead of mono28, app starts up.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=24190
Summary: Playon installer fails
Product: Wine
Version: 1.3.1
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: msi
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: ead1234(a)hotmail.com
Created an attachment (id=30453)
--> (http://bugs.winehq.org/attachment.cgi?id=30453)
console output
The installer for Playon fails. First it informs me to install mono to run .NET
executables, after installing mono it still fails with an msi error.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45237
Bug ID: 45237
Summary: Dragon Naturally Speaking 15 fails to install with
customactions error
Product: Wine
Version: 3.8
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mscoree
Assignee: wine-bugs(a)winehq.org
Reporter: susancragin(a)earthlink.net
Distribution: ---
Created attachment 61466
--> https://bugs.winehq.org/attachment.cgi?id=61466
backtrace
Dragon Naturally Speaking 15 fails to install.
What I did:
NS15 needs the following: WMI, dotnet452, and Windows above 2003, preferably
Windows 7.
First I installed Windows PowerShell core using these directions:
https://docs.microsoft.com/en-us/powershell/scripting/setup/installing-powe…
Then I created a 64-bit wineprefix.
Installed dotnet 452 using winetricks
452 installs but then sets the wine version to either XP or 2003, neither of
which will run NS15. So...
winecfg Windows 7
Then the installation works. It requests that powershell be activated, and that
seems to work. It recognizes that the installed dotnet is inadequate, and
installs its own.
And then it starts to install the program.
What makes this confusing is that Natspeak 12.5 also uses dotnet452, and the
same things happen, but NS12.5 installs and runs fine.
This is the first error message I got
Expression: [mscorlib recursive resource lookup bug]
Description: Infinite recursion during resource lookup within mscorlib. This
may be a bug in mscorlib, or potentially in certain extensibility points such
as assembly resolve elements or CultureInfo names.
Resource name: ArgumentNull_Generic
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=36797
Bug ID: 36797
Summary: Overwolf Installation doesn't open a window.
Product: Wine
Version: 1.6.2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: jonaharagon(a)mcweb.us
Created attachment 48870
--> http://bugs.winehq.org/attachment.cgi?id=48870
Error log
The Overwolf installer
(http://appdb.winehq.org/objectManager.php?sClass=version&iId=30064) does not
even get to opening an installation window before it crashes. A log from the
console will be attached. I'm not sure if it's a problem with installations on
my host machine, and if I should reset the wineprefix or if it's a problem with
the executable. If anyone has any insight to what the error log means, that
would be great.
I am installing from the official source (www.overwolf.com/download)
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.