https://bugs.winehq.org/show_bug.cgi?id=45307
Bug ID: 45307
Summary: [GR FloorBoard] page fault on read access
Product: Wine-staging
Version: 3.9
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: kde.lists(a)yahoo.com
CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com
Distribution: ---
Created attachment 61582
--> https://bugs.winehq.org/attachment.cgi?id=61582
command line output 3.8 and 3.9
Arch Linux x86_64, wine-staging 3.8-1, 3.9-1, as well as wine 3.9-1 don't work
for me. If I try to launch GR-55FloorBoard.exe, from
https://vorboss.dl.sourceforge.net/project/grfloorboard/GR-55/GR-55FloorBoa…,
it doesn't open. Downgrading to wine-staging 3.7-1 solved the issue.
I tested with different kernels and installed unneeded things, such as Mono and
Gecko things via wine and installed optional dependencies from official Arch
repositories, that were not installed when wine-staging worked in the past, but
the only way to solve the issue was downgrading wine-staging.
The command line outputs from running 3.9 and 3.8 are attached. The snipped
output are many times repeated fixme messages.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=44666
Bug ID: 44666
Summary: Wolf RPG Editor: sizing/theming bugs
Product: Wine
Version: 3.3
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdi32
Assignee: wine-bugs(a)winehq.org
Reporter: galtgendo(a)o2.pl
Distribution: ---
There are quite a lot minor sizing bugs in GUI of Wolf RPG Editor.
Also, in the latest (2.21) there's something that might be a theming bug.
The `theming` bug is simple to describe: start the program, open one of
system/user/engine database dialogs, there's a lot of black in the dialog, that
just doesn't look like it should be there.
The sizing bugs are a bit harder to describe and might actually be font
related, due to this being a Japanese program.
In one of the above mentioned dialogs, in the part with values (on the right),
the values are displayed in spinboxes/comboboxes/text entries grouped in
frames.
It's most noticeable in earlier version of Editor, where - for example - if the
group consists of only spinboxes, the bottom one is drawn across the bottom
frame border, but even in the latest, those controls should be a bit more
padding between those controls - at least, going by the screenshots in the
manual.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30103
Bug #: 30103
Summary: Static controls with bitmap do not display correct
background.
Product: Wine
Version: 1.4-rc6
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: user32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: carlo.bramix(a)libero.it
Classification: Unclassified
Created attachment 39234
--> http://bugs.winehq.org/attachment.cgi?id=39234
Screenshot with difference between Windows and WINE
An image static control does not seem painting the background around the image
with the right color.
The default color used for filling the area around the image is not
COLOR_BTNFACE (I guess you selected that one) but instead it seems to be filled
with a solid brush created with the color in the origin of the image, at
coordinates (0,0).
I attached a screenshot that it shows the difference between the expected
result and the current result obtained in WINE.
This is a trick tipically used to reduce the size of the bitmap since the image
control "expands" the color we want without any additional work.
Sometimes you can see this artifact in some "about box" of some software,
however I also attached a demo programme that you can use to reproduce the
defect.
Sincerely,
Carlo Bramini
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40893
Bug ID: 40893
Summary: Knight and Merchants will not run. This app used to be
platinum
Product: Wine
Version: 1.6.2
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: bgoodwin91006(a)yahoo.com
Distribution: ---
Created attachment 54984
--> https://bugs.winehq.org/attachment.cgi?id=54984
detailed descrption of failure
The game Knights and Merchants used to run but fails with the current Debian 8
(Jessie) release of wine. The cdrom disk opens ok and installs but I get a
message on starting the game that there was an error and the game will close.
The detailed output indicates a segmentation fault.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=8051
Fabian Maurer <dark.shadow4(a)web.de> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |haakobja(a)gmail.com
--- Comment #162 from Fabian Maurer <dark.shadow4(a)web.de> ---
*** Bug 45301 has been marked as a duplicate of this bug. ***
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45300
Bug ID: 45300
Summary: Eviews 10SV: Crashes when performing ADF test on time
series
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Mac OS X
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: ga.carvajal10(a)uniandes.edu.co
Created attachment 61560
--> https://bugs.winehq.org/attachment.cgi?id=61560
Backtrace of Eviews 10SV
Whenever I try to run an augmented Dickey-Fuller test on a time series, the
program crashes an says Eviews10SV.exe must be closed. I'm on a MacBook Pro 15'
TouchBar with the OS up to date and the program is also on the latest version.
The problem started earlier today after an update to Eviews 10SV, which the
program informed by its automatic updates service. Right now I have installed
Wviews10SV Jun 4 2018 Build.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=10722
Summary: Error message when attempting to install games in Steam
Product: Wine
Version: 0.9.50.
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: wine-directx
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: spokehedz(a)gmail.com
Created an attachment (id=9560)
--> (http://bugs.winehq.org/attachment.cgi?id=9560)
Console output when running Steam
After installing Steam and letting it update, when attempting to install games
an error message appears.
Steam.exe (main exception): Win32 StructuredException at 7A9C8C95 :
Attempt to read from virtual address 0 without appropriate access rights.
And then Steam disappears. A dump of the output to the console is attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35155
Bug ID: 35155
Summary: PDF-Xchange Viewer chrashes when a lot of documents
opened
Product: Wine
Version: 1.4.1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: t.yellow.eyes(a)gmail.com
Classification: Unclassified
Created attachment 46899
--> http://bugs.winehq.org/attachment.cgi?id=46899
back trace of crash
PDF-Xchange Viewer works fine until I upon too much PDFs, then it crashes. In
my case this happens when I opened 5 PDFs.
I tried to install PDF-Xchange Viewer with 64 bit and with "export
WINEARCH=win32", but it didn't changed anything to this behavior. I attach the
back trace.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=25756
Summary: Cannot change input keys in Nestopia
Product: Wine
Version: 1.3.11
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: turbolad995(a)hotmail.co.uk
The input in Nestopia cannot be changed when it's run under Wine.
If you click Options > Input... and try changing the keyboard controls, such as
changing "K" and "L" to "Z" and "X" for example, it won't work. If using
Nestopia in Windows, the controls can be remapped.
Nestopia otherwise runs perfectly in Wine.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.