wine-bugs October 2020

wine-bugs@winehq.org

1 participants
6822 discussions

[Bug 32252] New: Corel Painter 12 EULA next button greyed out no matter what
by wine-bugs＠winehq.org 08 Oct '21

08 Oct '21

http://bugs.winehq.org/show_bug.cgi?id=32252 Bug #: 32252 Summary: Corel Painter 12 EULA next button greyed out no matter what Product: Wine Version: 1.5.17 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: andrewfulrich(a)gmail.com Classification: Unclassified Created attachment 42558 --> http://bugs.winehq.org/attachment.cgi?id=42558 wine output When I run setup.exe for Corel Painter 12, it loads up and takes me to the EULA. I can scroll to the bottom and check "I accept the terms and conditions", but it doesn't un-grey the "Next" button so I can't continue the setup. I am attaching the wine output. The last two lines are outputted when I clicked the window and then the checkbox. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 16

[Bug 30760] New: Crash (Unhandled page fault exception) exiting Open Metronome (WAV version)
by wine-bugs＠winehq.org 08 Oct '21

08 Oct '21

http://bugs.winehq.org/show_bug.cgi?id=30760 Bug #: 30760 Summary: Crash (Unhandled page fault exception) exiting Open Metronome (WAV version) Product: Wine Version: 1.4 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: major Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: james_avera(a)yahoo.com Classification: Unclassified Created attachment 40278 --> http://bugs.winehq.org/attachment.cgi?id=40278 Crash trace saved from "Program Error" dialog Open Metronome always crashes when exiting with "Unhandled exception: page fault on read access to 0xffffffff in 32-bit code..." See attached backtrace.txt The program is Open Metronome 5.06 which works (no crashes) on 32-bit Windows 7. The Wine host is Ubuntu 11.10 64-bit. The .msi file I installed is Open_Metronome_for_Windows-WAV.msi and can be downloaded at http://sourceforge.net/projects/openmetronome/files/openmetronome/5.06/Open… -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 7

[Bug 49433] New: MikuMikuMoving v1275 hangs on startup
by WineHQ Bugzilla 08 Oct '21

08 Oct '21

https://bugs.winehq.org/show_bug.cgi?id=49433 Bug ID: 49433 Summary: MikuMikuMoving v1275 hangs on startup Product: Wine Version: 5.8 Hardware: x86 OS: Linux Status: NEW Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: dark.shadow4(a)web.de Distribution: --- This is a regression, introduced by commit 42ed9797b1929fc5917bd967f7062cab953fab55 Author: Alexandre Julliard <julliard(a)winehq.org> Date: Sat Nov 16 21:00:08 2019 +0100 kernel32: Move EnumCalendarInfo functions to kernelbase. Signed-off-by: Alexandre Julliard <julliard(a)winehq.org> Reverting fixes the issue and makes the program start up. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 3

[Bug 44336] New: PureBasic x64 IDE crashes when launching online help ("F1 " key)
by wine-bugs＠winehq.org 08 Oct '21

08 Oct '21

https://bugs.winehq.org/show_bug.cgi?id=44336 Bug ID: 44336 Summary: PureBasic x64 IDE crashes when launching online help ("F1" key) Product: Wine Version: 2.22 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: major Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: niffo(a)free.fr Distribution: --- Launching the online help of PureBasic with "F1" crashes the IDE (seen at least on Wine64 1.8.7 and 2.22). The same bug was fixed for PureBasic x86 on wine x86 1.7.x but now (or still?) it crashes with PureBasic x64 on wine64. (tested With PureBasic 5.61 x64) To reproduce, you just have to download the demo version of PureBasic x64 here : http://www.purebasic.com/download/PureBasic_Demo_x64.zip Install it and launch the IDE then press "F1" keyboard key. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 11

[Bug 32783] New: STEP7_Lite_V30_incl_SP4 Setup Failed to start the service, Error:1053, Service request timeout.
by wine-bugs＠winehq.org 08 Oct '21

08 Oct '21

http://bugs.winehq.org/show_bug.cgi?id=32783 Bug #: 32783 Summary: STEP7_Lite_V30_incl_SP4 Setup Failed to start the service, Error:1053, Service request timeout. Product: Wine Version: 1.5.22 Platform: x86 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: fangendoucg(a)gmail.com Classification: Unclassified Created attachment 43286 --> http://bugs.winehq.org/attachment.cgi?id=43286 Terminal Output env: ubuntu12.04 & wine 1.5.22 with the patch of the bug 32764 The software can be freely downloaded from: https://a248.e.akamai.net/cache.automation.siemens.com/dnl/DQ/DQzMjkzAAAA_3… extract it, cd to folder STEP7_Lite_V30_incl_SP4 , then run: $wine Setup.exe While installing Automation License Manager V4.0 SP3, a dialog box showed like the attachment "dialog_box_1", click *R* showed another one like the attachment "dialog_box_2". The Chinese words in dialog_box_2 means insufficient buffer. -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 24

[Bug 48567] New: Wine returns the loopback IP as first item in GetIpAddrTable and a MAC of 0
by WineHQ Bugzilla 08 Oct '21

08 Oct '21

https://bugs.winehq.org/show_bug.cgi?id=48567 Bug ID: 48567 Summary: Wine returns the loopback IP as first item in GetIpAddrTable and a MAC of 0 Product: Wine Version: 5.0-rc3 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: iphlpapi Assignee: wine-bugs(a)winehq.org Reporter: ez(a)vajn.icu Distribution: --- Created attachment 66389 --> https://bugs.winehq.org/attachment.cgi?id=66389 C source This is the same bug as 40247 which was marked as "CLOSED FIXED" All flexnet based licensing fails to work under wine because it receives a hardware MAC of 0 returned by the "lo" interface: $ lmutil.exe lmhostid lmutil - Copyright (c) 1989-2017 Flexera Software LLC. All Rights Reserved. The FlexNet host ID of this machine is "ffffffff" If you compile the attached C program and run it in wine you get: $ mingw32-gcc -DMINGW -o get_mac get_mac.c -lnetapi32 $ ./get_mac.exe MAC: 000000000000 In Linux the eth0 MAC is: $ gcc -o get_mac get_mac.c $ ./get_mac Grabbing MAC address for interface eth0 MAC: e03619b3b50e -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 3

[Bug 46365] New: Proteus 8.7 SP3 - Cannot open network adapter: en0: BIOCSRTIMEOUT: Invalid argument [U2]
by wine-bugs＠winehq.org 08 Oct '21

08 Oct '21

https://bugs.winehq.org/show_bug.cgi?id=46365 Bug ID: 46365 Summary: Proteus 8.7 SP3 - Cannot open network adapter: en0: BIOCSRTIMEOUT: Invalid argument [U2] Product: Wine Version: 4.0-rc3 Hardware: x86 OS: Mac OS X Status: UNCONFIRMED Severity: normal Priority: P2 Component: wpcap Assignee: wine-bugs(a)winehq.org Reporter: rajhlinux(a)yahoo.com Created attachment 63098 --> https://bugs.winehq.org/attachment.cgi?id=63098 proteus simulation error without wpcap.dll override. Everything is working fine in proteus 8.7 SP3 but when running a simulation with an ENC28J60 ethernet controller on the schematic, proteus stops and gives an error: Cannot open network adapter: en0: BIOCSRTIMEOUT: Invalid argument [U2] Proteus requires WinPcap drivers for networking simulations. I attempted to use wpcap.ddl override from winecfg as native and did the simulation again and got the error: Failed to initialize WinPcap Drivers [U2] I also tried installing proteus 8.7 SP3 on crossover, playonmac and wineskin all give the same errors when running the same simulation above. I tried using proteus in both 32 and 64bit installations with same errors. After launching proteus from wine, proteus has a working internet connection because I can see the news updates from the main home page of proteus. I know the simulation works because I have installed windows 10 x64 using vmware fusion on the same computer installing the same proteus 8.7 sp3 installer which I used for wine and runs perfectly using Win10Pcap drivers. I'm sure the WincPcap drivers that comes with proteus installation which you have to manually install from the programs folder will work without Win10Pcap drivers. I have attached the error log. macOS Mojave: 10.14.2 Wine Dev 4.0 rc3 -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 4

[Bug 40173] New: traffic watcher complians "This program works only on Ethernet networks." on wine with wpcap
by wine-bugs＠winehq.org 08 Oct '21

08 Oct '21

https://bugs.winehq.org/show_bug.cgi?id=40173 Bug ID: 40173 Summary: traffic watcher complians "This program works only on Ethernet networks." on wine with wpcap Product: Wine Version: 1.9.3 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: wpcap Assignee: wine-bugs(a)winehq.org Reporter: zhangjianqiu_133(a)yeah.net Distribution: --- Created attachment 53674 --> https://bugs.winehq.org/attachment.cgi?id=53674 Log for wine relay trace When running traffic watcher on wine (with pcap supported), An err Msgbox pops out shows "This program works only on Ethernet networks." and when use WINEDEBUG=+relay,+wpcap,+tid wine xxx.exe it shows this, which I think is wrong 0009:trace:wpcap:wine_pcap_datalink (0x7d8c1b08) 0009:Ret wpcap.pcap_datalink() retval=00000071 ret=004078a7 The retval here seems to make no sense\ The app can be get via sourceforge: https://sourceforge.net/projects/trafficwatcher/files/ The bug above is tested with ver 2.0.1 The attachment is the result of cutting full log with cat log | grep wpcap -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 5

[Bug 20907] New: $ORIGIN is undefined on NetBSD, breaking compile
by wine-bugs＠winehq.org 05 Oct '21

05 Oct '21

http://bugs.winehq.org/show_bug.cgi?id=20907 Summary: $ORIGIN is undefined on NetBSD, breaking compile Product: Wine Version: 1.1.33 Platform: PC URL: http://mail-index.netbsd.org/netbsd-users/2009/07/29/m sg004188.html OS/Version: NetBSD Status: UNCONFIRMED Keywords: download, source Severity: blocker Priority: P2 Component: build-env AssignedTo: wine-bugs(a)winehq.org ReportedBy: austinenglish(a)gmail.com When compiling on NetBSD, build fails _really_ early, with: execname not specified in AUX vector googling around, I found: http://mail-index.netbsd.org/netbsd-users/2009/07/29/msg004188.html which shows that apparently $ORIGIN is not defined on NetBSD. I'm not quite sure wine can work around it, so marking the bug as unconfirmed for now... -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 22

[Bug 42875] New: gaokao.love.100 Days failed to start
by wine-bugs＠winehq.org 03 Oct '21

03 Oct '21

https://bugs.winehq.org/show_bug.cgi?id=42875 Bug ID: 42875 Summary: gaokao.love.100 Days failed to start Product: Wine Version: 2.6 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: litimetal(a)gmail.com Distribution: --- Created attachment 57993 --> https://bugs.winehq.org/attachment.cgi?id=57993 terminal.txt gaokao.love.100 Days is a game available on steam: http://store.steampowered.com/app/347620/ 0. rm -rf ~/.wine 1. winetricks steam 2. Install gaokao.love.100 Days from steam 3. Launch it from steam 4. The screen is black, the background music plays normally $ wine --version wine-2.6-154-gcced5dfbde -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 11

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-bugs October 2020