wine-bugs September 2023

wine-bugs@winehq.org

1 participants
2329 discussions

[Bug 35940] New: Server (and perhaps others) may fail to build on some platforms
by wine-bugs＠winehq.org 18 May '24

18 May '24

http://bugs.winehq.org/show_bug.cgi?id=35940 Bug ID: 35940 Summary: Server (and perhaps others) may fail to build on some platforms Product: Wine Version: unspecified Hardware: x86 OS: Windows Status: UNCONFIRMED Severity: normal Priority: P2 Component: build-env Assignee: wine-bugs(a)winehq.org Reporter: carlo.bramix(a)libero.it In my opinion there is a severe mistake in the build system for the server. >From the man page of GCC, the documentation for '-I' option says: `-I DIR' Add the directory DIR to the list of directories to be searched for header files. Directories named by `-I' are searched before the standard system include directories. If the directory DIR is a standard system include directory, the option is ignored to ensure that the default search order for system directories and the special treatment of system headers are not defeated . When building the server, a '-I' option is placed on the command line, pointing to the source directory of the server. The file wine/port.h provides this piece of code: [...cut...] #ifdef HAVE_PROCESS_H # include <process.h> #endif [...cut...] The problem comes out because, inside the directory with the sources of the server, there is a file named process.h and since the -I option allows to take the files before the standard system include directories, the wine/port.h won't include the system file, but the one in the server directory: infact, it happens that the local process.h file is included two times. This is the cause for the server not compiled correctly on my platform (cygwin) but probably it can be also applied to others. I did an experiment and I have bypassed the problem by changing the generated Makefile: I replaced the '-I' option that pointed to the source directory of the server with '-idirafter'. The final result is a server that installs and runs correctly on Windows. Actually, this defect caused a failure on the server, but probably it may apply to all components of WINE with some local include files: the option that allows to point to the source directory of the component being compiled (and only this one) should be changed with '-idirafter' or something similar, depending on the compiler used, while all other paths could be left to '-I' without troubles. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 6

[Bug 39532] New: Assassin's Creed Unity doesn't run
by wine-bugs＠winehq.org 17 May '24

17 May '24

https://bugs.winehq.org/show_bug.cgi?id=39532 Bug ID: 39532 Summary: Assassin's Creed Unity doesn't run Product: Wine Version: unspecified Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: major Priority: P2 Component: directx-d3dx10 Assignee: wine-bugs(a)winehq.org Reporter: anakin.cs(a)gmail.com Distribution: --- Created attachment 52679 --> https://bugs.winehq.org/attachment.cgi?id=52679 terminal log I've been trying to run Assassin's Creed Unity from Uplay on my laptop, both on the Intel card and Nvidia card (with primusrun), and I always get the following error message (translated from French): "Can't launch the game. Your video card doesn't support DirectX 11 or the video drivers need to be updated." My video card is an Nvidia Geforce 850M. Attached is the terminal output after trying to launch the game. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 12

[Bug 53197] New: Shogun Total War 2 needs d3dx11_42.dll.D3DX11LoadTextureFromTexture.
by WineHQ Bugzilla 17 May '24

17 May '24

https://bugs.winehq.org/show_bug.cgi?id=53197 Bug ID: 53197 Summary: Shogun Total War 2 needs d3dx11_42.dll.D3DX11LoadTextureFromTexture. Product: Wine Version: 7.11 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: directx-d3d Assignee: wine-bugs(a)winehq.org Reporter: hibbsncc1701(a)gmail.com Distribution: --- With both wined3d and dxvk, Shogun Total War 2 generates the following in DirectX 11 mode (on both 32bit native and WoW64 prefixes) before reaching the game's main menu: ---Log output--- d3d call failed (0x80004001) : unspecified 0100:fixme:d3dx:D3DX11GetImageInfoFromMemory src_data 046FE756, src_data_size 5592532, pump 00000000, img_info 0055CBD0, hresult 00000000 stub! d3d call failed (0x80004001) : unspecified 0100:fixme:d3dx:D3DX11GetImageInfoFromMemory src_data 046F3D2A, src_data_size 5592532, pump 00000000, img_info 0055CBD0, hresult 00000000 stub! d3d call failed (0x80004001) : unspecified 0100:fixme:d3dx:D3DX11GetImageInfoFromMemory src_data 046FEA86, src_data_size 5592532, pump 00000000, img_info 0055CBD0, hresult 00000000 stub! d3d call failed (0x80004001) : unspecified 0100:fixme:d3dx:D3DX11GetImageInfoFromMemory src_data 046F405A, src_data_size 5592532, pump 00000000, img_info 0055CBD0, hresult 00000000 stub! d3d call failed (0x80004001) : unspecified wine: Call from 7B0122F6 to unimplemented function d3dx11_42.dll.D3DX11LoadTextureFromTexture, aborting 0100:fixme:faultrep:ReportFault 0055C6B8 0x0 stub wine: Unimplemented function d3dx11_42.dll.D3DX11LoadTextureFromTexture called at address 7B0122F6 (thread 0100), starting debugger... ---Log output--- As a workaround, the game can be played in DirectX 9 mode. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 5

[Bug 49674] New: Feature Request: Restoring previous resolution upon an app crashing
by WineHQ Bugzilla 17 May '24

17 May '24

https://bugs.winehq.org/show_bug.cgi?id=49674 Bug ID: 49674 Summary: Feature Request: Restoring previous resolution upon an app crashing Product: Wine Version: unspecified Hardware: Other OS: other Status: UNCONFIRMED Severity: enhancement Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: s.maddox(a)lantizia.me.uk So this has been a bit of a bug of mine with Wine for a while, but you may think it's not really a problem Wine should deal with - which may be a fair point. But I couldn't find anything clearly asking for this as a feature request... so lets see how well it fairs. # The problem Lets say you open up a Windows executable which changes your screens resolution (e.g. a game) and it either... a) freezes b) is broken enough that its UI (if any appears) can't be used to nicely ask it to quit c) crashes and quits differently to how it'd normally do so upon user request With a) and b) you likely need to kill that process, which ultimately leaves you in the same situation as c). But however it happens... you're likely to find your resolution now stuck to whatever it set. If that is an incredibly low resolution (like 320x240 or 640x480)... then with the desktop environment of today (especially with HiDPI) you're likely going to struggle finding the proper option to fix it. Worse you might resort to a terminal (or switch TTY) and mess around with the xrandr command for a stupid amount of time trying to find the names of screens and such. # Expected Behaviour Well I'm not sure what actually does this. But in actual Windows (e.g Windows 10), when this same circumstance occurs... the resolution is always restored back to what it was. This leaves me to believe that Windows itself has something for this eventuality. # Research Well I've been searching around for solutions to this one for years and the best I always come across... is someone saying you're better off with a script (usually calling xrandr) mapped to a hot key or something for this eventuality. Which is fine if the number of displays you've got connected and their resolutions are always consistent... but often for laptop users moving between docks and such - it isn't. A quick chat on the #winehq IRC channel had someone mention that Proton can now scale games to the resolution you're already using instead (when the app requests a resolution change)... and pointed out these patches... https://github.com/GloriousEggroll/proton-ge-custom/blob/master/patches/pro… https://github.com/GloriousEggroll/proton-ge-custom/blob/master/patches/pro… That's fine, and it's a welcome feature. But I do wonder if this is a universal fix for any request for any resolution change... regardless the age (and compatibility with which version of Windows it was meant for) of the game and the way it draws on the screen (e.g. SDL, OpenGL, DirectDraw, Vulkan, etc...). However it *may* give some hope for people wanting to run older windowed-mode games from the early Win 3.1/95 era which refuse to be re-sized/re-scaled... but that's a topic for another feature request :) # Conclusion I've not got any. Should this be the job of Wine to restore the prior resolution if the app/game fails to? Like Windows somehow does? Or is this something the OS (whatever that may be, Linux/macOS or even Windows) should be doing separately from Wine for any process? Also if this is a dupe, feel free to mark it as such... I've looked and couldn't find anything that is quite so specific - at least with the points raised here. Thoughts? -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

1 5

[Bug 26407] New: Shadowgrounds Survivor crashes after viewing the map
by wine-bugs＠winehq.org 17 May '24

17 May '24

http://bugs.winehq.org/show_bug.cgi?id=26407 Summary: Shadowgrounds Survivor crashes after viewing the map Product: Wine Version: 1.3.15 Platform: x86 URL: http://www.gamershell.com/download_23192.shtml OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: gyebro69(a)gmail.com Created an attachment (id=33629) --> (http://bugs.winehq.org/attachment.cgi?id=33629) terminal output In the game the crash always occurs when I switch back to normal mode after viewing the map (by pressing <Tab>). Sometimes the game "survives" 2-3 switches between the two modes but eventually it will crash. How to reproduce the problem in the demo: 1. Choose only Physx and Windows Media Codecs when the installer asks for it (native d3dx9_36.dll will be placed in the game directory). 2. Start the game either by survivor.exe or with the launcher. 3. Choose <New Game> from the menu. When you gain control over your character press <Tab> to switch to map mode then press <Tab> again to get back to normal mode. This might need to be repeated 2-3 times. Sooner or later the game will crash. If I don't use the map mode, the game seems to be stable (I've played for about 30-40 minutes). I can reproduce the crash with Wine-1.0.1, too. The crash happens even if I lower the gfx details to the minimum and with disabled audio. When starting the game with WINEDEBUG=warn+heap (is that the correct syntax?) the crash doesn't occur. Fedora 14 x86 Nvidia GeForce 250 / driver 260.19.36 -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 17

[Bug 44625] New: Cybernoid 2 exits but x window drawing updates are frozen
by wine-bugs＠winehq.org 17 May '24

17 May '24

https://bugs.winehq.org/show_bug.cgi?id=44625 Bug ID: 44625 Summary: Cybernoid 2 exits but x window drawing updates are frozen Product: Wine Version: 3.2 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: dav75uk(a)yahoo.co.uk Distribution: --- You can get this game from https://www.classic-retro-games.com/games/action/cybernoid-2--the-revenge-3… When you quit the game, x windows no longer updates the screen - events are being responded to though (you can click stuff then change to a terminal tty and back and see the updates). The only way to get back to a sane system is kill xwindows with ctrl alt backspace. This is seen on opensuse 42.3 which uses xf86 -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 3

[Bug 31665] New: Femap unexpected crash on rebuild database (or any command that involves it i.e. import)
by wine-bugs＠winehq.org 17 May '24

17 May '24

http://bugs.winehq.org/show_bug.cgi?id=31665 Bug #: 31665 Summary: Femap unexpected crash on rebuild database (or any command that involves it i.e. import) Product: Wine Version: 1.5.12 Platform: x86-64 OS/Version: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown AssignedTo: wine-bugs(a)winehq.org ReportedBy: dark.schneider(a)iol.it Classification: Unclassified Created attachment 41633 --> http://bugs.winehq.org/attachment.cgi?id=41633 Backtrace of crash triggered by file->rebuild in femap 10.3 with wine 1.5.12 1) wine femap.exe 2) file->rebuild... 3) answer yes. The crash happen with any action that implies a rebuild database by femap. I.e. if you import a "large" bdf, lunching a rebuild is just a fast way to check if the bug is present or not. Wine version I tested without the bug (those are working): 1.0.1 1.1.29 1.3.6 Wine versions i tested with the bug (crash with similar backtrace to one attached): 1.4.1-2 (from debian repo) 1.5.6-2 (from debian repo) 1.5.12 I have tested with both femap 10.2 and femap 10.3 and they share the same problem with no difference (i.e. probably the code on their side did not changed and if someone has an older version around it may show the same bug). I have not tested Femap 10.3.1, but may show the same problem. All of this is related to 32 bit version of femap and wine running on a AMD 64 bit system. I have no chance to test 32 bit on 32 bit. The bug persist on another system with ati/amd video driver, tested with both open source and closed opposed by this system that has closed source nvidia blob. Due to this bug seems unrelated to the video rendering (e.g. the problem with femap not redrawing automatically the gl window looks unrelated, if needed I can post another bug for that, but it's minor glitch) Best Regards, Gabriele Dini Ciacci P.S. Unrelated practical thing that make it desirable to have a recent version of wine working: With 1.5.6-2 and 1.5.12 the program is much faster (especially on start-up and actually faster than on windows) -- Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email Do not reply to this email, post in Bugzilla using the above URL to reply. ------- You are receiving this mail because: ------- You are watching all bug changes.

2 26

[Bug 44863] New: Performance regression in Prince of Persia 3D
by wine-bugs＠winehq.org 17 May '24

17 May '24

https://bugs.winehq.org/show_bug.cgi?id=44863 Bug ID: 44863 Summary: Performance regression in Prince of Persia 3D Product: Wine Version: unspecified Hardware: x86 OS: Linux Status: NEW Severity: normal Priority: P2 Component: directx-d3d Assignee: wine-bugs(a)winehq.org Reporter: stefan(a)codeweavers.com Distribution: --- Prince of Persia 3D's performance went from perfectly smooth to about 0.5 fps. I suspect 0b92a6fba7a6e60c6ff1a3729a3b21019c2df0ce is to blame, but I have not run a regression test yet. The problem is that the game creates a rather large (2MB) D3DVBCAPS_SYSTEMMEMORY, maps it (the entire buffer due to API limitations), writes a handful of vertices and draws a handful of vertices. Currently wined3d uploads the entire 2MB, evicts the sysmem copy and downloads it from the GPU every map / unmap / draw cycle. The most obvious performance fix is not to create a VBO. Doing this restores the performance, but questions remain. On startup, the game writes "NetImmerse D3DDriver Info: Hardware supports system memory textures" and "NetImmerse D3DDriver Info: No AGP support detected". The first info seems wrong, so it is possible that the game enters a codepath it does not choose on Windows. Not creating a VBO is not an option on Core Contexts, so I investigated what's going wrong with the PBO codepath on. First of all, evicting the sysmem copy seems like a bad choice. It happens because ddraw buffers are not marked dynamic. We may want to chance this. The game uses d3d3, so there's no DDLOCK_DISCARDCONTENTS. The game passes DDLOCK_WAIT | DDLOCK_WRITEONLY to IDirect3DVertexBuffer::Lock. Commenting out the eviction call improves performance quite a bit, but it is still noticeably slow. wined3d_buffer_map maps through heap_memory instead of glMapBuffer because of the "(flags & WINED3D_MAP_WRITE) && !(flags & (WINED3D_MAP_NOOVERWRITE | WINED3D_MAP_DISCARD))" condition. Removing this condition uses glMapBuffer, but does not improve performance. It seems the large glMapBuffer is still slow, at least on OSX with legacy contexts. So there are a few questions that need to be answered: *) Is the game using a broken codepath? *) Write tests for sysmem buffers *) Consider making all d3d3 buffers dynamic *) Test if the glMapBuffer path is fast on Linux *) Investigate if Core Contexts + GL_ARB_buffer_storage help on OSX. -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 23

[Bug 45358] New: AC Syndicate is completely broken
by wine-bugs＠winehq.org 17 May '24

17 May '24

https://bugs.winehq.org/show_bug.cgi?id=45358 Bug ID: 45358 Summary: AC Syndicate is completely broken Product: Wine-staging Version: 3.10 Hardware: x86 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: berillions(a)gmail.com CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com Distribution: Debian Created attachment 61658 --> https://bugs.winehq.org/attachment.cgi?id=61658 Graphic rendering completely broken Hello, With wine-3.10, it's possible to launch the game without crash. Now, there is a very big issue with graphic rendering with wined3d. (see screenshot) In the output console, i have a lot of message about : - "d3d_shader:shader_sm4_read_instruction_modifier Unhandled modifier 0xXXXXXXXX" - "err:d3d:wined3d_debug_callback 0x35451990: "GL_INVALID_OPERATION in glGetUniformLocation(program not linked)"" - "fixme:d3d_shader:shader_glsl_dump_program_source ..." - "fixme:d3d:context_bind_shader_resources Shader 0x34e90740 needs 34 samplers, but only 32 are supported." For Wine dev who want to reproduce the issue, you need wine-staging to avoid the issue with UPlay (bug #35902) + Wine AND the issue with AC Syndicate + Uplay with online mode (bug #45312) Google drive link for the log : https://drive.google.com/open?id=15Q2gY9uk_JohSwqlhwix9HK8BgUWCY5E -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 14

[Bug 44009] New: Syberia Gog version: crash after cinematics
by wine-bugs＠winehq.org 17 May '24

17 May '24

https://bugs.winehq.org/show_bug.cgi?id=44009 Bug ID: 44009 Summary: Syberia Gog version: crash after cinematics Product: Wine Version: 2.20 Hardware: x86-64 OS: Linux Status: UNCONFIRMED Severity: normal Priority: P2 Component: -unknown Assignee: wine-bugs(a)winehq.org Reporter: legluondunet(a)free.fr Distribution: --- Created attachment 59671 --> https://bugs.winehq.org/attachment.cgi?id=59671 Syberia Gog wine 2.20 backtrace Hello, I just acquire the Syberia Gog version and it is impossible for me to play this game on Linux with Wine. Happily the game was free. How to reproduce: Install Syberia Gog version Launch the game, you can see cinematics but just when the menu appear the game crash. I joined you the terminal log/backtrace. Config: Ubuntu 17.10 Nvidia 384.90 -- Do not reply to this email, post in Bugzilla using the above URL to reply. You are receiving this mail because: You are watching all bug changes.

2 6

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

wine-bugs September 2023