https://bugs.winehq.org/show_bug.cgi?id=47781
Bug ID: 47781
Summary: Occurs after opening vovoid
Product: Wine
Version: 4.0.2
Hardware: x86
OS: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: emilyschulteslifkin(a)gmail.com
Created attachment 65270
--> https://bugs.winehq.org/attachment.cgi?id=65270
Error message after opening vovoid
Open Vovoid, loads as normal, shows starting screen, then says a serious error
happened it is a 64 application and I have 64 optional downloaded
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40850
Bug ID: 40850
Summary: MS Money 2000: text is cut off when entering an
operation
Product: Wine
Version: 1.8.2
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: andrea.vai(a)unipv.it
Distribution: ---
Created attachment 54839
--> https://bugs.winehq.org/attachment.cgi?id=54839
Screenshot of cut off text
While I am entering a transaction, the text that I try to enter is cut off at
the bottom. After the enter is done, the text appears correctly.
In the attached screenshot you can see, from top to bottom:
- the first transaction, previously entered, which shows the text ("Car: Fuel")
correctly;
- a second transaction, during its insertion, showing the same text ("Car" /
"Fuel") cut off
The text cut off is somewhat unreadable, so this bug is quite annoying.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47785
Bug ID: 47785
Summary: CERT_CHAIN_POLICY_IGNORE_NOT_TIME_VALID_FLAG not taken
into account
Product: Wine
Version: 4.16
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: crypt32
Assignee: wine-bugs(a)winehq.org
Reporter: lois.diqual(a)gmail.com
Distribution: ---
Created attachment 65274
--> https://bugs.winehq.org/attachment.cgi?id=65274
c# program that verifies an expired certificate using IgnoreNotTimeValid
I am debugging a C# program that validates a certificate chain using
X509VerificationFlags.IgnoreNotTimeValid. The provided certificate is expired,
but it shouldn't matter because of this flag.
The chain validates properly on MacOS with Mono.
However on Wine with dotnet472, the policy fails with error NotTimeValid.
I believe there is a bug in `chain.c verify_base_policy`:
https://github.com/wine-mirror/wine/blob/e6138a52a907fe4b9b03abe0b6cf6cfb9f….
In this if statement, the policy verification routine determines that the
certificate has expired, but it should ignore the error if `checks` contains
`CERT_CHAIN_POLICY_IGNORE_NOT_TIME_VALID_FLAG`, and this logic is missing.
To reproduce:
- Create a wine prefix with dotnet472 using winetricks
- Go to drive_c/windows/Microsoft.NET/Framework/v4.0.30319 and copy verify.cs
in there
- Compile verify.cs: wine csc.exe
/reference:"C:\windows/Microsoft.NET/Framework/v4.0.30319/WPF/WindowsBase.dll"
verify.cs
- Run: wine verify.exe
- It should print "Valid cert" but instead prints "Invalid cert" with
NotTimeValid.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47784
Bug ID: 47784
Summary: Subtitle Edit in Wine fails when attempting to use OCR
utility
Product: Wine
Version: 4.16
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: shagooserver(a)gmail.com
Distribution: ---
Created attachment 65273
--> https://bugs.winehq.org/attachment.cgi?id=65273
backtrace
This is Wine 32 bit, windows 7.
When opening a .sup file (bitmaps) with SE's OCR utility the file is loaded and
then the program terminates with an error file/backtrace which is attached.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47752
Matteo Bruni <matteo.mystral(a)gmail.com> changed:
What |Removed |Added
----------------------------------------------------------------------------
Fixed by SHA1| |cb703739e5c138e3beffab321b8
| |4edb129156000
Resolution|--- |FIXED
Status|UNCONFIRMED |RESOLVED
--- Comment #3 from Matteo Bruni <matteo.mystral(a)gmail.com> ---
I think it's better to resolve this bug for the time being instead. Feel free
to reopen if things change.
Thank you for the various bug reports!
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47711
Bug ID: 47711
Summary: Crash DbgBreakPoint
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: sppmacd(a)gmail.com
Distribution: ---
Created attachment 65182
--> https://bugs.winehq.org/attachment.cgi?id=65182
backtrace
Program crashes while running. It's working fine on Windows.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47619
Bug ID: 47619
Summary: No Sound on all Games [WINE + PROTON]
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: winepulse.drv
Assignee: wine-bugs(a)winehq.org
Reporter: florian.richer(a)protonmail.com
Distribution: ---
When i run a game with Proton or With wine only. I don't have any sound.
I use Kubuntu 18.04.3.
I don't have any console error for sound problem and on winecfg it detect
pulseaudio device with proton and all device with wine
Steam system information:
Computer Information:
Manufacturer: Unknown
Model: Unknown
Form Factor: Desktop
No Touch Input Detected
Processor Information:
CPU Vendor: AuthenticAMD
CPU Brand: AMD Ryzen Threadripper 2990WX 32-Core Processor
CPU Family: 0x17
CPU Model: 0x8
CPU Stepping: 0x2
CPU Type: 0x0
Speed: 3000 Mhz
64 logical processors
8 physical processors
HyperThreading: Supported
FCMOV: Supported
SSE2: Supported
SSE3: Supported
SSSE3: Supported
SSE4a: Supported
SSE41: Supported
SSE42: Supported
AES: Supported
AVX: Supported
CMPXCHG16B: Supported
LAHF/SAHF: Supported
PrefetchW: Unsupported
Operating System Version:
Ubuntu 18.04.3 LTS (64 bit)
Kernel Name: Linux
Kernel Version: 5.0.0-25-generic
X Server Vendor: The X.Org Foundation
X Server Release: 12004000
X Window Manager: KWin
Steam Runtime Version: steam-runtime_0.20190711.3
Video Card:
Driver: NVIDIA Corporation GeForce RTX 2080 Ti/PCIe/SSE2
Driver Version: 4.6.0 NVIDIA 430.26
OpenGL Version: 4.6
Desktop Color Depth: 24 bits per pixel
Monitor Refresh Rate: 60 Hz
VendorID: 0x10de
DeviceID: 0x1e07
Revision Not Detected
Number of Monitors: 3
Number of Logical Video Cards: 1
Primary Display Resolution: 1920 x 1080
Desktop Resolution: 5200 x 1080
Primary Display Size: 20.08" x 11.42" (23.07" diag)
51.0cm x 29.0cm (58.6cm diag)
Primary Bus: PCI Express 16x
Primary VRAM: 11264 MB
Supported MSAA Modes: 2x 4x 8x 16x
Sound card:
Audio device: %s1
Memory:
RAM: 32094 Mb
Miscellaneous:
UI Language: English
LANG: fr_FR.UTF-8
Total Hard Disk Space Available: 223813 Mb
Largest Free Hard Disk Block: 195227 Mb
VR Headset: None detected
Recent Failure Reports:
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47725
Bug ID: 47725
Summary: DirectX End-User Runtimes (June 2010) install fail
Product: Wine
Version: 4.15
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: seganfl2k(a)gmail.com
Distribution: ---
Created attachment 65201
--> https://bugs.winehq.org/attachment.cgi?id=65201
LOG FAIL
Wine 4.15 DirectX End-User Runtimes (June 2010) install fail
VIDEO BELOW
https://youtu.be/pziw0eQrOws
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47636
Bug ID: 47636
Summary: Wizard101 text is upside down
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: NEW
Keywords: regression
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: dimesio(a)earthlink.net
CC: hverbeet(a)gmail.com
Regression SHA1: e795ddb3d80d7b94d29cf97a24a01bb157b0138d
Distribution: SUSE
Created attachment 65069
--> https://bugs.winehq.org/attachment.cgi?id=65069
Wizard101 with upside down text
I'm attaching a screenshot that shows the problem. The launcher is not
affected; the problems starts at the KingsIsle splash screen. Also note that
besides the text being upside down, the text boxes are also in the wrong
positions; the row of controls should be at the bottom of the screen, the
avatar name at the top.
Regression test results:
e795ddb3d80d7b94d29cf97a24a01bb157b0138d is the first bad commit
commit e795ddb3d80d7b94d29cf97a24a01bb157b0138d
Author: Henri Verbeet <hverbeet(a)codeweavers.com>
Date: Tue Aug 6 01:23:16 2019 +0430
wined3d: Store clip control support in struct wined3d_d3d_info.
Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard(a)winehq.org>
:040000 040000 e30ce5a41e66389a4d47eb51a074eea3448c24e5
c758d10d382595dec61f6883b55a0df603269477 M dlls
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47654
Bug ID: 47654
Summary: NFSU2 crashes in menu
Product: Wine
Version: 4.14
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: rehutsi(a)gmail.com
Distribution: ---
Created attachment 65097
--> https://bugs.winehq.org/attachment.cgi?id=65097
Backtrace file
I experienced crashes during gameplay after playing for several minutes in the
recent development versions (4.11 and 4.12), but now it happens already while
being still in the menu after starting the application.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47590
Bug ID: 47590
Summary: Bug when playing BFME 2 ROTWK
Product: Wine
Version: 4.12.1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: prometheuswithbutter(a)gmail.com
Distribution: ---
Created attachment 64997
--> https://bugs.winehq.org/attachment.cgi?id=64997
The terminal log file.
In the application base its written the game would work fine. It usually does,
but when I play the war of the ring mode I have a problem. Every time a battle
occurs, and I click on the land where the battle is located, a square yellow
window opens and a few seconds nothing happens. Then a new window opens which
says Wine C++ runtime library error. When I start wine debugger he tells about
Critical error in GameEngine::update(). The game crashes. I tried every
faction. I tried Windows XP, 7, 10.
My terminal log is attached. I am using 32bit Wineprefix but tried 64 as well.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46531
Bug ID: 46531
Summary: Regression in Spellforce 2: textures flickering to
darker/lighter ones
Product: Wine
Version: 4.0
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: idarktemplar(a)mail.ru
Distribution: ---
Created attachment 63385
--> https://bugs.winehq.org/attachment.cgi?id=63385
screenshots-collage.jpeg
When playing first mission of Spellforce 2 Shadow Wars, I've noticed screen
flickering. On further inspection I noticed that when you move screen to
different locations on map using mouse at screen border or arrow keys,
sometimes objects on screen go darker, sometimes they go back to original
colours or something close to them, and on some other locations it switches
between dark and usual colours few times a second. This colour switching during
move of screen camera looks like some annoying screen flickering. Effect is
especially noticeable if there are a lot of trees on screen.
Due to bug #34323 I was using a prefix with directx9, directplay and
d3dcompiler_43 installed via winetricks.
I've tried a clean prefix with wine 3.0.3 with and without winetricks stuff,
and it worked fine. After that I've switched to wine 4.0, and both with and
without winetricks stuff issue appears.
After that I've tried bisecting and testing using prefix with winetricks stuff,
and I've found first commit which causes issue to me. I wasn't able to revert
it for wine 4.0 and test without that change.
3d6eb8cf1dc1e509a74f85fd2356c6946372ecc5 is the first bad commit
commit 3d6eb8cf1dc1e509a74f85fd2356c6946372ecc5
Author: Matteo Bruni <mbruni(a)codeweavers.com>
Date: Tue Feb 13 01:00:42 2018 +0100
d3d9: Handle D3DUSAGE_AUTOGENMIPMAP textures entirely in d3d9.
Signed-off-by: Matteo Bruni <mbruni(a)codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard(a)winehq.org>
:040000 040000 85b2524db3e32e37bf00a4cc87c0c1b63b68a6be
0fc10fb629b23703e3aa087b45b3b3960e6b5956 M dlls
Screenshots collage is in attachment. It contains two locations from first map
of campaign, taken with wine 3.0.3, wine 4.0 and wine 4.0 at a bit different
location (causing objects to be coloured darker). It demonstrates difference
between usual screen and darker screen, and when camera is moving the change
between two of them causes effect similar to flickering.
OS: Gentoo Linux x86_64 (amd64)
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47772
Bug ID: 47772
Summary: Origin: Legacy installer client won't open on
winvista+ environment
Product: Wine-staging
Version: 4.16
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: werifGX(a)gmail.com
CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com
Distribution: ---
Created attachment 65253
--> https://bugs.winehq.org/attachment.cgi?id=65253
wine_output.txt
Legacy installer of Origin (Digital Distribution Platform) from
https://origin-a.akamaihd.net/Origin-Client-Download/origin/legacy/OriginTh…
won't open on winvista+ environment.
# To reproduce
- Download
https://origin-a.akamaihd.net/Origin-Client-Download/origin/legacy/OriginTh…
- Execute with wine <4.16 in winvista+ environment
- Expect failure like 'wine_output.txt'
# Workaround
Workaround is to use winxp environment for the installation and then switch to
default environment with overwrites alike:
```bash
# Set environment on winxp for required apps
## Using winvista is mandatory
https://github.com/Winetricks/winetricks/pull/1318#issuecomment-531562386
if [ "$(uname)" = 'FreeBSD' ]; then w_set_app_winver 'Origin.exe' 'winxp';
else w_set_app_winver 'Origin.exe' 'winvista' ; fi
w_set_app_winver 'OriginClientService.exe' 'winxp'
w_set_app_winver 'Setup.exe' 'winvista'
w_set_app_winver 'UpdateTool.exe' 'winvista'
w_set_app_winver 'OriginUninstall.exe' 'winvista'
w_set_app_winver 'OriginCrashReporter.exe' 'winvista'
w_set_app_winver 'OriginClient.exe' 'winvista'
w_set_app_winver 'IGOProxy.exe' 'winvista'
w_set_app_winver 'IGOProxy64.exe' 'winvista'
w_set_app_winver 'OriginFR.exe' 'winvista'
w_set_app_winver 'GetGameToken32.exe' 'winvista'
w_set_app_winver 'GetGameToken64.exe' 'winvista'
w_set_app_winver 'EAProxyInstaller.exe' 'winvista'
# winxp is required for the installation
w_set_winver 'winxp'
w_warn "You should *uncheck* sharing hardware info"
# Installer
w_try "$WINE" "${W_CACHE}/origin/OriginThinSetup.exe"
# Switch back to default environment
w_unset_winver
```
Referencing winetricks merge request:
https://github.com/Winetricks/winetricks/pull/1318
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42298
Bug ID: 42298
Summary: err:clipboard:convert_selection Timed out waiting for
SelectionNotify event
Product: Wine
Version: 2.0-rc6
Hardware: x86-64
OS: Linux
Status: NEW
Severity: trivial
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: 00cpxxx(a)gmail.com
Distribution: Debian
Although I'm a fan of the "console messages are not bugs" this is a little
annoying, it can repeat several times. Happens under heavy CPU/IO usage and
will repeat until CPU/IO goes back to "normal", this is the impression I have,
it could be something else.
It is sort of easy to reproduce and it is NOT present since the patch that
moved stuff ( http://source.winehq.org/git/wine.git/commitdiff/7d0ddff2 ), it
was something that was changed later I believe started less than 2 months ago.
I can try bisecting but it will take some time so if anybody (Julliard) has a
hint it will be better.
Am I the only affected?
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47774
Bug ID: 47774
Summary: OST PST Viewer fails to launch in Wine
Product: Wine
Version: 4.0.2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: sendtojimmy(a)yahoo.com
Distribution: ---
Created attachment 65259
--> https://bugs.winehq.org/attachment.cgi?id=65259
error and backtraces
OST PST Viewer v. 1.01.104
(http://try.ostpstviewer.com/free-ost-pst-files-viewer/) installs in Wine 4.0.2
on Linux Mint 19 Tara but fails to launch.
OST PST Viewer (free version) works OK in Windows 8.
ZIP attachments:
Program error from Wine when trying to launch OST PST Viewer:
OSTPSTViewer-Wine_Program_Error.png
Wine backtrace with app settings for Windows 8: OSTPSTViewer-backtrace-Win8.txt
Wine backtrace with app settings for Windows 10:
OSTPSTViewer-backtrace-Win10.txt
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47762
Bug ID: 47762
Summary: LoadStringA fails instead of returning const pointer
to string if buffer length is zero
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: user32
Assignee: wine-bugs(a)winehq.org
Reporter: tsmx(a)tut.by
Distribution: ---
https://docs.microsoft.com/en-us/windows/win32/api/winuser/nf-winuser-loads…
According to MSDN doc, LoadStringA should be able to return const pointer
without using allocated buffer if the buffer size is set to zero.
Here we see that Wine just returns -1 in that case:
https://source.winehq.org/git/wine.git/blob/refs/heads/master:/dlls/user32/…
Since there is something that looks legit in the LoadStringW just above, it
shouldn't be too hard to fix, amirite?
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47732
Bug ID: 47732
Summary: This is bad bug in wine.
Product: Packaging
Version: unspecified
Hardware: Other
OS: Mac OS X
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: wine-packages
Assignee: wine-bugs(a)winehq.org
Reporter: dfurman156(a)gmail.com
CC: dimesio(a)earthlink.net, michael(a)fds-team.de,
sebastian(a)fds-team.de
Created attachment 65207
--> https://bugs.winehq.org/attachment.cgi?id=65207
This is nightmare
Everybody have this
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47752
--- Comment #1 from tempel.julian(a)gmail.com ---
An incomplete list of applications affected:
Hitman 2
Doom (2016) OpenGL
TES IV: Oblivion
TES V: Skyrim
The Witcher 3
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47760
Bug ID: 47760
Summary: "Music racer" game crash
Product: Wine
Version: 4.16
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: przemowi2002(a)gmail.com
Distribution: ---
Created attachment 65242
--> https://bugs.winehq.org/attachment.cgi?id=65242
backtrace
Latest version of "Music racer" from steam is crashing when trying to start the
game.
Tried clear install of wine, wine64, 32/64bit prefixes, playonlinux install.
HW: Thinkpad T60p/4gb ram (FireGL V5250 [modified X1300])
SW: Lubuntu desktop 19.04
Error report in the attachment.
Thanks.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47761
Bug ID: 47761
Summary: BYOND Dreamseeker 512.1472 crashes upon shift-clicking
a mob
Product: Wine
Version: 4.16
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: steamport(a)protonmail.com
Distribution: ---
Created attachment 65243
--> https://bugs.winehq.org/attachment.cgi?id=65243
winedbg backtrace
Upon attempting to examine a mob (via shift-click), sometimes, the game will
crash. The crash is inconsistent but easily reproduced.
BYOND download: http://www.byond.com/download/build/512/512.1479_byond.exe
`wine --version` outputs "wine-4.15 (Staging)".
Steps to reproduce:
- Install/setup BYOND + it's dependencies
- Join SS13 server (I was playing on Hippie)
- Observe
- Shift click random mobs til you crash.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42907
Bug ID: 42907
Summary: Wine crashes when loading The Specialists mod for Half
Life
Product: Wine
Version: 2.6
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: ganthore(a)gmail.com
Distribution: ---
Consider this a followup to the ABANDONED ticket:
https://bugs.winehq.org/show_bug.cgi?id=8859
This has been a long standing problem for around a decade, I'd like for this to
get fixed...
When running The Specialists mod, the game will instantly crash once a map
being to load.
I've reproduced this on both Gentoo and FreeBSD systems. The game runs fine on
native windows.
> wine hl.exe -game ts -novid -debug
fixme:module:load_dll Loader redirect from L"wined3d.dll" to
L"wined3d-csmt.dll"
err:dc:CreateDCW no driver found for L"\\\\.\\DISPLAY2\\Monitor0"
Using breakpad crash handler
fixme:ntdll:EtwEventRegister ({47a9201e-73b0-42ce-9821-7e134361bc6f},
0x3f006740, 0x3f041d28, 0x3f041d20) stub.
fixme:ntdll:EtwEventRegister ({58a9201e-73b0-42ce-9821-7e134361bc70},
0x3f006740, 0x3f041d60, 0x3f041d58) stub.
fixme:ntdll:EtwEventRegister ({3fa9201e-73b0-43fe-9821-7e145359bc6f},
0x3f006740, 0x3f041cf0, 0x3f041ce8) stub.
fixme:ntdll:EtwEventRegister ({1432afee-73b0-42ce-9821-7e134361b433},
0x3f006740, 0x3f041d98, 0x3f041d90) stub.
fixme:ntdll:EtwEventRegister ({4372afee-73b0-42ce-9821-7e134361b519},
0x3f006740, 0x3f041dd0, 0x3f041dc8) stub.
fixme:ver:GetCurrentPackageId (0x30eb40 0x0): stub
fixme:ntdll:create_logical_proc_info stub
fixme:ntdll:create_logical_proc_info stub
Setting breakpad minidump AppID = 70
Forcing breakpad minidump interfaces to load
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
fixme:ntdll:EtwEventRegister ({47a9201e-73b0-42ce-9821-7e134361bc6f}, 0xe57850,
0xece168, 0xece160) stub.
fixme:ntdll:EtwEventRegister ({58a9201e-73b0-42ce-9821-7e134361bc70}, 0xe57850,
0xece1a0, 0xece198) stub.
fixme:ntdll:EtwEventRegister ({3fa9201e-73b0-43fe-9821-7e145359bc6f}, 0xe57850,
0xece130, 0xece128) stub.
fixme:ntdll:EtwEventRegister ({1432afee-73b0-42ce-9821-7e134361b433}, 0xe57850,
0xece1d8, 0xece1d0) stub.
fixme:ntdll:EtwEventRegister ({4372afee-73b0-42ce-9821-7e134361b519}, 0xe57850,
0xece210, 0xece208) stub.
fixme:imm:ImmGetOpenStatus (0x168bd8): semi-stub
fixme:ver:GetCurrentPackageId (0x32e68c 0x0): stub
Steam_SetMinidumpSteamID: Caching Steam ID: 76561197960455784 [API loaded
yes]
Steam_SetMinidumpSteamID: Setting Steam ID: 76561197960455784
err:ole:CoGetClassObject class {4c9b6dde-6809-46e6-a278-9b6a97588670} not
registered
err:ole:CoGetClassObject no class object {4c9b6dde-6809-46e6-a278-9b6a97588670}
could be created for context 0x1
fixme:win:RegisterDeviceNotificationW (hwnd=0x10182,
filter=0x161f64c,flags=0x00000000) returns a fake device notification handle!
fixme:xinput:XInputGetCapabilities (index 0, flags 0x1, capabilities 0x32f674)
Stub!
fixme:win:RegisterTouchWindow (0x10184 00000003): stub
fixme:wgl:X11DRV_wglChoosePixelFormatARB unused pfAttribFList
fixme:imm:ImmReleaseContext (0x10184, 0xf8a6a0): stub
fixme:msctf:ThreadMgr_ActivateEx Unimplemented flags 0x4
fixme:msctf:ThreadMgrSource_AdviseSink (0x206a58) Unhandled Sink:
{ea1ea136-19df-11d7-a6d2-00065b84435c}
fixme:imm:NotifyIME NI_CLOSECANDIDATE
fixme:msctf:ThreadMgrSource_AdviseSink (0x206a58) Unhandled Sink:
{ea1ea136-19df-11d7-a6d2-00065b84435c}
fixme:iphlpapi:NotifyAddrChange (Handle 0x1022ee34, overlapped 0xfc55670): stub
fixme:winsock:WSALookupServiceBeginW (0x1022ef34 0x00000ff0 0x1022ef7c) Stub!
[0428/164919:ERROR:network_change_notifier_win.cc(111)] WSALookupServiceBegin
failed with: 8
fixme:ntdll:create_logical_proc_info stub
fixme:ntdll:create_logical_proc_info stub
AppActive: active
AppActive: active
fixme:winsock:convert_af_w2u unhandled Windows address family 6
fixme:winsock:convert_af_w2u unhandled Windows address family 6
fixme:winsock:convert_af_w2u unhandled Windows address family 6
fixme:wbemprox:wbem_locator_ConnectServer unsupported flags
fixme:wbemprox:client_security_SetBlanket 0x666b4b18, 0x1f22f620, 10, 0,
(null), 3, 3, 0x0, 0x00000000
fixme:wbemprox:client_security_Release 0x666b4b18
fixme:iphlpapi:NotifyAddrChange (Handle 0x307014c, overlapped 0x3070150): stub
fixme:wbemprox:wbem_locator_ConnectServer unsupported flags
fixme:wbemprox:client_security_SetBlanket 0x666b4b18, 0x1f221328, 10, 0,
(null), 3, 3, 0x0, 0x00000000
fixme:wbemprox:client_security_Release 0x666b4b18
fixme:wbemprox:enum_class_object_Next timeout not supported
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Steam_SetMinidumpSteamID: Caching Steam ID: 76561197960455784 [API loaded
yes]
Steam_SetMinidumpSteamID: Setting Steam ID: 76561197960455784
fixme:winsock:interface_bind Broadcast packets on interface-bound sockets are
not currently supported on this platform, receiving broadcast packets will not
work on socket 03ac.
err:winsock:interface_bind Failed to bind to interface, receiving broadcast
packets will not work on socket 03ac.
fixme:ntdll:EtwEventRegister ({47a9201e-73b0-42ce-9821-7e134361bc6f},
0x3f006740, 0x3f041d28, 0x3f041d20) stub.
fixme:ntdll:EtwEventRegister ({58a9201e-73b0-42ce-9821-7e134361bc70},
0x3f006740, 0x3f041d60, 0x3f041d58) stub.
fixme:ntdll:EtwEventRegister ({3fa9201e-73b0-43fe-9821-7e145359bc6f},
0x3f006740, 0x3f041cf0, 0x3f041ce8) stub.
fixme:ntdll:EtwEventRegister ({1432afee-73b0-42ce-9821-7e134361b433},
0x3f006740, 0x3f041d98, 0x3f041d90) stub.
fixme:ntdll:EtwEventRegister ({4372afee-73b0-42ce-9821-7e134361b519},
0x3f006740, 0x3f041dd0, 0x3f041dc8) stub.
File c:\program files\steam\steamapps\common\half-life\ts\demoheader.dmf was
never closed
fixme:ntdll:EtwEventUnregister (deadbeef) stub.
fixme:ntdll:EtwEventUnregister (deadbeef) stub.
fixme:ntdll:EtwEventUnregister (deadbeef) stub.
fixme:ntdll:EtwEventUnregister (deadbeef) stub.
fixme:ntdll:EtwEventUnregister (deadbeef) stub.
fixme:ntdll:EtwEventUnregister (deadbeef) stub.
fixme:ntdll:EtwEventUnregister (deadbeef) stub.
fixme:ntdll:EtwEventUnregister (deadbeef) stub.
fixme:ntdll:EtwEventUnregister (deadbeef) stub.
fixme:ntdll:EtwEventUnregister (deadbeef) stub.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47524
Bug ID: 47524
Summary: Hearthstone black screen
Product: Wine-staging
Version: 4.12.1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: priit(a)ww.ee
CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com
Distribution: ---
Hearthstone not working correctly with this new version either (since 4.10) -
on startup the screen remains black while the sound / music is working on the
background. Had to revert back to 4.9-1 where it works.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46549
Bug ID: 46549
Summary: PUBG Lite Launcher crash
Product: Wine-staging
Version: 4.0
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: esdrastarsis(a)gmail.com
CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com
Distribution: ---
Created attachment 63418
--> https://bugs.winehq.org/attachment.cgi?id=63418
PUBG Lite Log with vcrun2017 installed with winetricks
PUBG Lite launcher causes some errors when it runs, the prefix is 64-bit,
Windows 7, and I installed the .NET Framework 4.7.1 with Winetricks, when I run
the launcher without vcrun2017 the launcher opens but an error message appears
(Visual C++ Runtime error), then with vcrun2017 (installed with Winetricks) the
wine closes with an error message. Its possible easily reproduce this error by
using the PUBG Lite installer in Lutris created by me.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47476
Bug ID: 47476
Summary: Rhinoceros 6 unable to verify online-license because
of missing functions in httpapi.dll
Product: Wine-staging
Version: 4.11
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: felix+winehq(a)klaftenegger.de
CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com
Distribution: ---
Created attachment 64852
--> https://bugs.winehq.org/attachment.cgi?id=64852
Log of running Rhino.exe
The current Version of Rhino3d (Version 6.15) isnt able to verify the
online-license and im not able to test more functions without.
I was able to use Rhino3d Version 5 with wine this is a really old version and
didnt need a online-license to run
The console-output shows that there are missing parts in wines httpapi.dll
---------------------------
Unhandled Exception: System.EntryPointNotFoundException: Unable to find an
entry point named 'HttpCloseRequestQueue' in DLL 'httpapi.dll'.
at
System.Net.UnsafeNclNativeMethods.SafeNetHandles.HttpCloseRequestQueue(IntPtr
pReqQueueHandle)
at System.Net.HttpRequestQueueV2Handle.ReleaseHandle()
at System.Runtime.InteropServices.CriticalHandle.Cleanup()
at System.Runtime.InteropServices.CriticalHandle.Dispose(Boolean disposing)
at System.Runtime.InteropServices.CriticalHandle.Finalize()
---------------------------
To be able to install and start rhino so far i needed to install following
parts via winetricks:
dotnet35,dotnet40,dotnet452,vcrun2010,vcrun2013,vcrun2017
and wine need to be 64-bit
i have attached the full log.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41258
Bug ID: 41258
Summary: Paragon crashes in loading screen
Product: Wine
Version: 1.9.18
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: plata(a)mailbox.org
Distribution: ---
Created attachment 55555
--> https://bugs.winehq.org/attachment.cgi?id=55555
Debug output
Paragon first freezes, then crashes in the loading screen.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22038
Summary: Art of Murder Cards of Destiny: some character models
are plain white
Product: Wine
Version: 1.1.40
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: gyebro69(a)gmail.com
Created an attachment (id=26799)
--> (http://bugs.winehq.org/attachment.cgi?id=26799)
White character model in the game
In Art of Murder: Cards of Destiny (this is the latest one from the series)
some of the characters appear in plain white. First time I realized this issue
in the second scene of the game, where you can enter a bar.
Wine-1.1.40 from source
Fedora 12 x86
Nvidia 7600 GT card with driver 195.36.08
I could only find a German demo of the game:
http://www.worthdownloading.com/download.php?gid=4444&id=21130 (1.1 Gb in
size) but don't know if it includes that part of the game.
The game was installed into a clean wineprefix but it installed DirectX
runtimes automatically. I didn't try it with wine's built-in DX dlls. I don't
know if that matters.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47629
Bug ID: 47629
Summary: PotPlayer 1.7: Crash when trying to play any file
Product: Wine
Version: 4.14
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: smart-32(a)s-32.tk
Distribution: ---
Created attachment 65061
--> https://bugs.winehq.org/attachment.cgi?id=65061
Bug report
In 4.14 version of wine when you trying to open any file in potplayer for the
first time happens nothing. This is same as in 4.13 version and earlier.
But when you press stop and then open file again potplayer starts to play it in
wine 4.13. In wine 4.14 it leads to crash.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26215
Summary: Super Meat Boy shows grey textures for some objects
Product: Wine
Version: 1.3.14
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: scott(a)open-vote.org
I'm getting grey textures for some, but not all, objects in Super Meat Boy.
The walls and player render fine, but the squirrels and spinning blades in the
first few levels show up as moving grey squares.
Nvidia driver version 260.19.06 on Ubuntu 10.10 64-bit, with a GeForce GTS 450
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34296
Bug #: 34296
Summary: wine --help message should be translatable
Product: Wine
Version: 1.7.0
Platform: x86-64
OS/Version: Linux
Status: NEW
Keywords: download, source
Severity: normal
Priority: P2
Component: loader
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: frederic.delanoy(a)gmail.com
Classification: Unclassified
It's currently hardcoded in loader/main.c (check_command_line function)
static const char usage[] =
"Usage: wine PROGRAM [ARGUMENTS...] Run the specified program\n"
" wine --help Display this help and exit\n"
" wine --version Output version information and
exit";
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47752
John E <john.ettedgui(a)gmail.com> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |john.ettedgui(a)gmail.com
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47737
Bug ID: 47737
Summary: Edusystem installs but cannot login due to a missing
menu
Product: Wine
Version: 4.15
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: danielsuarez369(a)protonmail.com
Distribution: ---
Created attachment 65216
--> https://bugs.winehq.org/attachment.cgi?id=65216
Terminal output
Hello there! Edusystem (Direct download link:
http://resource.edufile.net/tools/viewe ... Viewer.zip ) is a piece of software
for viewing books, unfortunately while I can install it just fine it seems,
when I go to create a profile and login, the select language dropdown menu is
missing, also minor issue is I cannot change profile picture (who cares about
that though haha).
Any help is greatly appreciated! Thank you! The attachment I sent is the
output, note this little bit keeps getting spammed constantly when I try to
access the menu with minor variations:
0009:fixme:msctf:InputProcessorProfileMgr_GetActiveProfile
(05FF9338)->({34745c63-b2f0-4784-8b67-5e12c8701a31} 0034E6B0)
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47756
Jeremy Newman <jnewman(a)codeweavers.com> changed:
What |Removed |Added
----------------------------------------------------------------------------
Resolution|--- |FIXED
Status|ASSIGNED |RESOLVED
--- Comment #10 from Jeremy Newman <jnewman(a)codeweavers.com> ---
(In reply to Alexandre Julliard from comment #9)
> Hopefully it's working now
Looks good. Closing this out.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47730
Bug ID: 47730
Summary: Synthesia does not handle piano reconnect
Product: Wine
Version: 4.15
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: spleefer90(a)gmail.com
Distribution: ---
Using Synthesia 10.5.1.
Setting Synthesia up for USB MIDI Piano works great, but when I disconnect the
piano (either by turning it off or physically unplugging the cable) and then
reconnecting it again, I need to restart Synthesia or disable/enable the piano
in Synthesia to make it work again.
This does not happen on Windows 10 1903, there it finds the piano again on
reconnect.
Physically disconnecting the cable:
0077:fixme:midi:handle_midi_event Unexpected event received, type = 43 from 0:1
At reconnect there's no new logs.
Pressing "Ignore this device" and "Use this device" in Synthesia to get it
picked up again:
0078:fixme:avrt:AvRevertMmThreadCharacteristics (12345678): stub
007e:fixme:avrt:AvSetMmThreadCharacteristicsW (L"Audio",03EAFF14): stub
007e:fixme:avrt:AvRevertMmThreadCharacteristics (12345678): stub
0084:fixme:avrt:AvSetMmThreadCharacteristicsW (L"Audio",03FBFF14): stub
Tried with wine and wine-staging on 4.15.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47756
--- Comment #9 from Alexandre Julliard <julliard(a)winehq.org> ---
Hopefully it's working now
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47756
--- Comment #8 from Alexandre Julliard <julliard(a)winehq.org> ---
testing...
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47753
Benjamin <benjamin.bozou(a)gmail.com> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |benjamin.bozou(a)gmail.com
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47749
Bug ID: 47749
Summary: Reconnect of gamepad
Product: Wine-staging
Version: 4.15
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: alexzk(a)mail.ru
CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com
Distribution: ---
If gamepad is reconnected windows game (Elite dangerous in my case) fails to
use it back.
Elite itself has a bug so you can see if gamepad was connected during startup
due this bug. So it seems game detects gamepad but cannot receive events from.
Complete restart of wine (closing ALL windows programs in prefix) resolves
issue. If wine was not restarted (for example, launcher still runs) then
gamepad is "broken".
Downgrading to 4.12.1 fixed that - gamepad is working after reconnect.
P.S. ONCE it worked ok for me in 4.15 too, but it was 1 time of 100 reconnects
or so.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47729
Bug ID: 47729
Summary: Amazon Workspaces Client: crashes after login when
launching Windows WorkSpace desktop
Product: Wine
Version: 4.15
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: casutherland(a)gmail.com
Distribution: ---
Created attachment 65206
--> https://bugs.winehq.org/attachment.cgi?id=65206
backtrace
Running Ubuntu 18.04 LTS and installed the Amazon WorkSpaces client Version
2.5.8.1216 around 16-Jul-2019, using the distro default wine-stable package,
and a (much) older version of wine-stable.
Everything was working fine, the WorkSpaces client successfully launched
Windows WorkSpaces & Linux WorkSpaces.
Then, I ran the software update tool, for Ubuntu 18.04.3 LTS around
01-Aug-2019.
Shortly after the update, the WorkSpaces client began failing with the error
message below whenever a Windows WorkSpace was launched.
Authentication is successful, however the client crashes immediately after the
Windows WorkSpace display is opened.
"The program workspaces.exe has encountered a serious problem and needs to
close. We are sorry for the inconvenience."
"This can be caused by a problem in the program or a deficiency in Wine. You
might want to check the Application Database for tips about running this
application."
Note that the WorkSpaces client running with wine successfully launches a Linux
WorkSpaces desktop, however the client crashes when launching a Windows
WorkSpaces desktop.
Upgraded the WorkSpaces client to Version 2.5.10.1246, and it is till failing,
with the same error message.
Updated Wine to 4.15 development and tried both versions of the WorkSpaces
client, 2.5.8.1216 and 2.5.10.1246, still failing with the same error message.
A full stacktrace is attached, and the following excerpt is displayed on the
terminal from which the workspaces.exe is launched using wine.
017c:fixme:msvcp:_Locinfo__Locinfo_ctor_cat_cstr (0034CDFC 1 C) semi-stub
00ec:fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub
0117:err:winediag:WSASocketW Failed to create a socket of type SOCK_RAW, this
requires special permissions.
014b:fixme:winspool:FindFirstPrinterChangeNotification Stub: 0x1 7 0 0xfe7fef4
wine: Unhandled page fault on read access to 0x00000000 at address 0x7da63bac
(thread 014b), starting debugger...
014e:fixme:dbghelp:elf_search_auxv can't find symbol in module
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47745
Bug ID: 47745
Summary: crash dialog should instruct to attach console log to
bug report
Product: Wine
Version: 4.15
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: winedbg
Assignee: wine-bugs(a)winehq.org
Reporter: apq49584(a)tuofs.com
Distribution: ---
The crash dialog displays the backtrace in a convinent window and instructs the
user to attach that to a bug report.
But as I have learned, the console log (with debug symbols installed) is even
more useful/required information to attach.
It would make sense for the Error Details Windows to prominently mention that
and display short instructions on how to obtain it, or even display it right
away, if possible.
related: https://bugs.winehq.org/show_bug.cgi?id=28543
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46821
Bug ID: 46821
Summary: Alan Wake has light rendering issue
Product: Wine
Version: 4.3
Hardware: x86-64
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: andrey.goosev(a)gmail.com
Distribution: ---
Created attachment 63844
--> https://bugs.winehq.org/attachment.cgi?id=63844
screenshot
Staying in a safe zone shows this. Contrast depends on angle.
Reproducible after commit dd0ea0a61463db83c647a9367ca61e2b69a98eb3.
Solves with cleaning shaders cache and disabling CSMT.
After that:
err:d3d:wined3d_debug_callback 0x1c589c0: "GL_INVALID_OPERATION error
generated. <program> has not been linked, or is not a program object.".
err:d3d:wined3d_debug_callback 0x1c589c0: "GL_INVALID_OPERATION error
generated. <program> object is not successfully linked, or is not a program
object.".
NVIDIA Driver 418.43, wine-4.3-229-g6d82b2f1ad
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42987
Bug ID: 42987
Summary: Dawn of Magic does not start with DirectX failed call
error
Product: Wine
Version: 2.7
Hardware: x86-64
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: 00cpxxx(a)gmail.com
Distribution: Debian
Created attachment 58124
--> https://bugs.winehq.org/attachment.cgi?id=58124
std log with +msgbox
Dawn of Magic installs but does not run with the message below right after
changing screen resolution. The game does not seem to have a demo, I can
provide other logs as requested.
trace:msgbox:MSGBOX_OnInit L".\\BMRender\\rmode.cpp(3583): DirectX call failed:
code=0x80004001 (-2147467263)"
Tested on both Intel with Mesa 13.0.5 and NVIDIA proprietary driver, with CSMT
on/off results are the same.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47714
Bug ID: 47714
Summary: Empire Earth: Gold rotate some menu components
Product: Wine
Version: 4.14
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: slawek(a)lach.art.pl
Distribution: ---
Empire Earth's main menu is completely broken.
Background is rotated 180 degrees, but menu element not.
After go to options menu, some elements are rotated 180 degrees with rotate
point set to center of the screen.
https://pastebin.com/e7GkpqzE
I using wine 4.14 on OpenSUSE Tumbleweed. My computer have Intel and AMD
graphic card.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47723
Bug ID: 47723
Summary: Wine 4.14 DX11 demul07_111117 Resident Evil 2 Pal
Product: Wine
Version: 4.15
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: seganfl2k(a)gmail.com
Distribution: ---
Created attachment 65197
--> https://bugs.winehq.org/attachment.cgi?id=65197
Misssing Shaders
missing shaders ect
VIDEO LINK
https://youtu.be/uIObb2omaYQ
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35279
Bug ID: 35279
Summary: Giana Sisters: Twisted Dreams v1.1.2: certain objects
have no textures
Product: Wine
Version: 1.7.9
Hardware: x86
OS: Linux
Status: NEW
Keywords: regression
Severity: minor
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: gyebro69(a)gmail.com
Classification: Unclassified
Regression SHA1: 611b541f292761e459eac4eb1cf88d765b939ff8
Created attachment 47053
--> http://bugs.winehq.org/attachment.cgi?id=47053
screenshot
This bug is present in the latest version of the game (1.1.2) available on
Steam or GOG.com, but I can't reproduce it with the demo version which is an
earlier version of the game.
Certain objects, characters are black when shader quality in the launcher set
to medium or high. Those objects appear correctly when shader quality set to
low.
Regression testing resulted in
611b541f292761e459eac4eb1cf88d765b939ff8 is the first bad commit
commit 611b541f292761e459eac4eb1cf88d765b939ff8
Author: Henri Verbeet <hverbeet(a)codeweavers.com>
Date: Tue Jun 12 17:03:49 2012 +0200
wined3d: Set undefined vertex attributes to 0.0.
:040000 040000 b36ae918ed4dbda9ae31976e72d500fce79c69fc
4d4701b1fcdaeeacffb68fd1b6f5d241e7a79a24 M dlls
Note: treasure chests in the game also appear without texture (one chest can be
seen in the attached screenshot with a flag on top of it). This, however, was
caused by a much earlier commit according to my regression testing, it was
commit 4936e71828669ef084f9cf243f924a11a2cdce50 that caused it. Setting shader
quality to low makes chests appear correctly.
Installing native d3dx9 libraries or disabling GLSL don't solve the problem.
Wine terminal output doesn't contain any useful information.
Let me know if you need a log with debug channels enabled.
Fedora 19 x86
Nvidia 250 / driver 325.15
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30061
Bug #: 30061
Summary: Shader bug in The Darkness II
Product: Wine
Version: 1.4-rc5
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: K1773R(a)darkgamex.ch
Classification: Unclassified
The Darkness II isnt rendering everything correct when using this patch from
here http://bugs.winehq.org/show_bug.cgi?id=29896.
Some textures arent rendered (black) and sometimes things are way to bright.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46336
Bug ID: 46336
Summary: Resident Evil 4 on Steam (appid 254700) black textures
in outdoor lighting
Product: Wine
Version: 4.0-rc2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3dx9
Assignee: wine-bugs(a)winehq.org
Reporter: vash63(a)gmail.com
Distribution: ---
Created attachment 63085
--> https://bugs.winehq.org/attachment.cgi?id=63085
Black textures
Almost every texture in the game is black including player characters,
seemingly other than decals like some leaf textures which are fine. Some areas
randomly have textures like normal, noticeably when you enter the first cabin
you can see Leon as soon as you enter the door but right when you exit back to
the outdoor lighting he turns black again.
Similar reports:
https://www.protondb.com/app/254700
Example image attached.
Duplicated with wine4.0rc2, proton 3.16 and proton 3.7.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=36089
Bug ID: 36089
Summary: SpinTires a wrong dirt rendering
Product: Wine
Version: 1.7.17
Hardware: x86
URL: http://oovee.chicsystems.net/SpinTiresInstall_060613.z
ip
OS: Linux
Status: NEW
Keywords: download
Severity: normal
Priority: P2
Component: directx-d3d
Assignee: wine-bugs(a)winehq.org
Reporter: andrey.goosev(a)gmail.com
Created attachment 48275
--> http://bugs.winehq.org/attachment.cgi?id=48275
in wine
See attached screenshots.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46606
Bug ID: 46606
Summary: [Git]vkd3d_d3d12.h not found
Product: vkd3d
Version: 1.1
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: vkd3d
Assignee: wine-bugs(a)winehq.org
Reporter: berillions(a)gmail.com
Distribution: ---
Hello,
I try to build vkd3d from git and it's impossible at this moment because
"vkd3d.h" does not find "vkd3d_d3d12.h".
make[1] : on entre dans le répertoire «
/home/babaorheum/Desktop/vkd3d-git/src/build »
CC libs/vkd3d/command.lo
In file included from ../vkd3d/libs/vkd3d/vkd3d_private.h:32,
from ../vkd3d/libs/vkd3d/command.c:20:
../vkd3d/include/vkd3d.h:26:11: erreur fatale: vkd3d_d3d12.h : Aucun fichier ou
dossier de ce type
# include <vkd3d_d3d12.h>
^~~~~~~~~~~~~~~
compilation terminée.
make[1]: *** [Makefile:1138: libs/vkd3d/command.lo] Error 1
make[1] : on quitte le répertoire «
/home/babaorheum/Desktop/vkd3d-git/src/build »
make: *** [Makefile:814: all] Error 2
==> ERREUR : Une erreur s’est produite dans build().
Abandon…
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29792
Bug #: 29792
Summary: Gothic 2 (JoWood Productions) installer fails due to
media validation tool failing (don't add
FILE_ATTRIBUTE_ARCHIVE by default to file entries)
Product: Wine
Version: 1.4-rc1
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: ntdll
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: focht(a)gmx.net
Classification: Unclassified
Hello,
I first wanted to investigate bug 22515 hence i bought the game for a few bucks
and looked into it...
Well, it seems there exist different editions of the game and the problems
might not be connected at all.
Although this is related to copy protection it's not the SecuROM 4.x tests
failing here - that part of protection works fine.
I have the 3 CD set by JoWood Productions released on November 29, 2002.
Near the end of installation process there is a tool "g2setup.exe" launched
which verifies the authenticity of install media.
That process returns a specific exit code (0x777 -> 1911) which basically says:
"all checks passed".
Any different exit code will roll back the whole installation!
Current workaround: kill the installer from another terminal when this
verification process starts.
Everything has already been copied up to this point so just wait until the disc
spins up and execute 'wineserver -k'.
--- snip ---
0024:Starting process L"C:\\Program Files\\Jowood\\Gothic II\\g2setup.exe"
(entryproc=0x4c6929)
--- snip ---
--- snip ---
-=[ ProtectionID v0.6.4.0 JULY]=-
(c) 2003-2010 CDKiLLER & TippeX
Build 07/08/10-17:57:05
...
Scanning -> Z:\home\focht\.wine\drive_c\Program Files\Jowood\Gothic
II\g2setup.dll
File Type : 32-Bit Dll (Subsystem : Win GUI / 2), Size : 229376 (038000h)
Byte(s)
[File Heuristics] -> Flag : 00000000000000001100001100000001 (0x0000C301)
[!] Armadillo v2.xx - v3.xx detected !
[i] Splash Setting (0x0) -> NONE / Duration : 00 second(s)
[CompilerDetect] -> Visual C/C++
- Scan Took : 0.560 Second(s)
--- snip ---
Various anti-debugging/hacking trickery which of course can be bypassed ;-)
Additionally to physical media analysis of GOTHIC2_CD3 (part of SecuROM) there
are "custom" checks present.
Most of them are simple ones like comparing disc serial against hard coded
value.
The directory structure is read from disc and CRC32 checksums are calculated
for specific files.
--- snip ---
ATTRIBS SIZE CRC32 NAME
____________________________________________________________
A R 362,789,836 5f4cb098 Gothic2-Setup.W03
A R 123 JoWooD Homepage.url
A R 14,816 Readme.txt
A R 289 Register.url
A R 5,569 eula.txt
A R 766 gothic2.ico
(DIR) 168,146,318 ArxDemo
A R 31,744 1d31e5c6 ArxDemo\Setup.exe
A R 877 ArxDemo\Setup.ini
A R 1,304,064 ArxDemo\Setup.msi
A R 101,581,207 ArxDemo\Setup1.cab
A R 23,103,162 ArxDemo\Setup2.cab
A R 31,150,491 ArxDemo\Setup3.cab
A R 1,309,184 ArxDemo\Setup_Deutsch.msi
A R 1,708,856 34ec21c0 ArxDemo\instmsi.exe
A R 1,822,520 e5563f20 ArxDemo\instmsiw.exe
...
Scan time.............[ 551.80] Seconds (551801 ms)
Total files...........[ 35] Files
Total size............[ 558,468,227] Bytes
Dirlist Text CRC32....[ 0032ED44]
____________________________________________________________
...
--- snip ---
Forget the scan time, I was debugging at this place ;-)
What makes things complicated is that additionally to per-file CRC32 checksums
there is also a CRC32 for the whole in-memory folder listing content generated
(see snippet) -> "Dirlist Text CRC32" (in snippet the address is printed, not
the value itself).
That overall checksum didn't match the internal hard-coded one.
One problem is that Wine adds FILE_ATTRIBUTE_ARCHIVE by default to each file
info entry.
Source:
http://source.winehq.org/git/wine.git/blob/c7cb3e6cb21598281cf2b00b2ccd8323…
This is breaks the overall checksum (file entries get "A" added).
The file entries have to have only FILE_ATTRIBUTE_READONLY set -> "R" (reside
on CDROM).
If FILE_ATTRIBUTE_ARCHIVE is omitted (and a second bug is worked around) the
verification process exits with exit code 0x777 which allows the main installer
to successfully finish.
---
There is another problem, a bug in the verification tool that unfortunately
prevents a "full" fix for this installer.
One of the file CRC32 on CD3 gets miscalculated ...
It took me some hours to find out this brain damage after successfully pinning
down the first problem and wondering why the overall checksum still didn't
match.
--- snip ---
...
0024:Call KERNEL32.CreateFileA(0032d734
"D:\\arxdemo\\setup.exe",80000000,00000001,00000000,00000003,00000080,00000000)
ret=00d86dfe
0024:Ret KERNEL32.CreateFileA() retval=000000a0 ret=00d86dfe
0024:Call KERNEL32.GetFileSize(000000a0,00000000) ret=00d87385
0024:Ret KERNEL32.GetFileSize() retval=00007c00 ret=00d87385
0024:Call ntdll.RtlAllocateHeap(00fc0000,00000000,00010010) ret=00be379b
0024:Ret ntdll.RtlAllocateHeap() retval=00fc5238 ret=00be379b
0024:Call KERNEL32.ReadFile(000000a0,00fc5238,00010000,00bfd464,00000000)
ret=00d8725a
0024:Ret KERNEL32.ReadFile() retval=00000001 ret=00d8725a
0024:Call ntdll.RtlFreeHeap(00fc0000,00000000,00fc5238) ret=00be3cea
0024:Ret ntdll.RtlFreeHeap() retval=00000001 ret=00be3cea
0024:Call KERNEL32.CloseHandle(000000a0) ret=00d8743a
0024:Ret KERNEL32.CloseHandle() retval=00000001 ret=00d8743a
--- snip ---
"D:\\arxdemo\\setup.exe" is the culprit. The file size is 31744 bytes.
The tool allocates a fixed 65552 byte buffer to read file content in and
calculate checksum on (actually 65536 bytes are used for checksumming).
Prior to calculating file CRC32 for "D:\\arxdemo\\setup.exe", the 350 MiB
"D:\\gothic2-setup.w03" was checksummed in 0x10000 byte chunks.
It had the same heap chunk address 0x00fc5238 which was later reused for
"D:\\arxdemo\\setup.exe" checksum calculation.
--- snip ---
0024:Call KERNEL32.CreateFileA(0032dd20
"D:\\gothic2-setup.w03",80000000,00000001,00000000,00000003,00000080,00000000)
ret=00d86dfe
0024:Ret KERNEL32.CreateFileA() retval=0000009c ret=00d86dfe
0024:Call KERNEL32.GetFileSize(0000009c,00000000) ret=00d87385
0024:Ret KERNEL32.GetFileSize() retval=159fbbcc ret=00d87385
0024:Call ntdll.RtlAllocateHeap(00fc0000,00000000,00010010) ret=00be379b
0024:Ret ntdll.RtlAllocateHeap() retval=00fc5238 ret=00be379b
0024:Call KERNEL32.ReadFile(0000009c,00fc5238,00010000,00bfd464,00000000)
ret=00d8725a
0024:Ret KERNEL32.ReadFile() retval=00000001 ret=00d8725a
...
0024:Call KERNEL32.ReadFile(0000009c,00fc5238,00010000,00bfd464,00000000)
ret=00d8725a
0024:Ret KERNEL32.ReadFile() retval=00000001 ret=00d8725a
0024:Call KERNEL32.ReadFile(0000009c,00fc5238,00008480,00bfd464,00000000)
ret=00d8725a
0024:Ret KERNEL32.ReadFile() retval=00000001 ret=00d8725a
0024:Call KERNEL32.ReadFile(0000009c,00fc5238,00008480,00bfd464,00000000)
ret=00d8725a
0024:Ret KERNEL32.ReadFile() retval=00000001 ret=00d8725a
0024:Call ntdll.RtlFreeHeap(00fc0000,00000000,00fc5238) ret=00be3cea
0024:Ret ntdll.RtlFreeHeap() retval=00000001 ret=00be3cea
...
--- snip ---
Because the heap chunk was reused and the buffer was fully filled from previous
run, the read file operation for "D:\\arxdemo\\setup.exe" only initialized the
first 31744 bytes.
The checksum is done on 65536 bytes of buffer which includes garbage/leftover
already present.
Well, the developers didn't bother to pass HEAP_ZERO_MEMORY to
RtlAllocateHeap() or explicit memset(ptr, 0, nbytes).
The tool "works" in Windows most likely due to different heap manager
implementation/usage or maybe application shims.
They put some effort into anti-debugging/hacking/copying and rambled about
piracy in hidden messages (found while debugging) ... and yet managed to put in
such bugs.
You can hack/patch ntdll.dll RtlAllocateHeap() -> forcing flags |=
HEAP_ZERO_MEMORY to verify the installer really works after fixing the first
problem.
Regards
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47739
Bug ID: 47739
Summary: realMyst stuck after clicking the image inside the
book
Product: Wine
Version: 4.0.1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: uri.valevski(a)gmail.com
Distribution: ---
Created attachment 65220
--> https://bugs.winehq.org/attachment.cgi?id=65220
logs
See attached logs.
The game starts up fine, up to the point where I click the image in the book.
Then there is just the sky background and nothing else happens (the music
continues). If I click esc it lets me pick the play mode, but then nothing
happens. Then if I click escape it takes me to the settings menu, but that
doesn't help either.
Although there are some dll issues, I don't think this is current blocker,
because these logs don't always show up (it has something to do with the play
mode I select or opening the options menu).
I also tried downloading the dlls and placing them in the system directory, but
this resulted in a different import error for them so maybe the files I used
weren't good.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47735
Bug ID: 47735
Summary: navicat运行问题
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: qcb122658550(a)163.com
Distribution: ---
Created attachment 65212
--> https://bugs.winehq.org/attachment.cgi?id=65212
navicat生成的错误日志
deepin系统安装mysql8.0.17和navicat后,打开navicat点击链接,输入信息,点击测试连接,navicat崩溃,点击链接也是崩溃
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30421
Bug #: 30421
Summary: obscure GDI Message Queue + Focus bug
Product: Wine
Version: 1.3.37
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: lkcl(a)lkcl.net
Classification: Unclassified
ok, this is a rather obscure bug that i've been experiencing for quite some
time, but hadn't got a handle on any of the functions being used, so couldn't
really provide a useful report. as i am now running pyjamas-desktop which uses
python ctypes bindings to gdi32 (!!) i can now provide useful feedback.
please see the following file, the GetMessage loop towards the end:
http://pyjs.org/pygit/#file=pyjd/mshtml.py&id=0d4b6787d01c3d90f2c8801c5c4c4…
basically, the repro is as follows:
* run wine python.exe Hello.py (an example)
* move the mouse out of the GDI32 (IWebBrowser2 OLE control) window
* move the mouse into the xterm where wine was fired up
* press ctrl-c
now, _normally_, under xp, nothing happens... and nothing _should_ happen...
ever. ctrl-c should be *completely* ignored. but, continue:
* move the mouse _back_ into the GDI32 window
* the program exits
the exit should *not* be happening when the mouse is moved back.
which brings me on to the various experiences that i've had with focus issues,
especially dialog boxes. maybe this is because i'm using fvwm2, but the
behaviour of focus on dialog boxes and especially inputboxes within dialog
boxes is _very_ erratic. the mouse is needed to be moved into the parent
window in order sometimes for keyboard focus to arrive on the inputbox within
the dialog box! sometimes that doesn't work, and the mouse is required to be
moved onto the bar at the top of the parent window (the one with the title -
the x-windows / fvwm window bar!)
all very odd, and probably a different bug, but hey :)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47715
Bug ID: 47715
Summary: Maximized Window size and location is incorrect if
overridden by WM_GETMINMAXINFO or SetWindowPos
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: user32
Assignee: wine-bugs(a)winehq.org
Reporter: danweiss(a)gmail.com
Distribution: ---
Created attachment 65185
--> https://bugs.winehq.org/attachment.cgi?id=65185
Example WIN32 program that demonstrates the bug
Tested on Wine Staging 4.14 on MX Linux.
On Windows, you can use WM_GETMINMAXINFO, then a maximized window will appear
with a specified size and location. Even though the window is considered
Maximized, it is not necessarily covering up the whole screen.
You can also use SetWindowPos to move the maximized window to a specific
location and size.
After calling SetWindowPos, the window will immediately move and resize. The
next time the window is restored, then maximized, it will snap back to the
coordinates specified in WM_GETMINMAXINFO.
When I run the test program on Windows 10, it create the window at location
(256,256), with size 256x256, then moves it to location (512,256).
When I try this on Wine, Maximized means maximized, and the window fills the
entire region that a maximized program would occupy. It does not take into
account the maximized size specified in WM_GETMINMAXINFO or SetWindowPos.
Related bugs: 5941
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47692
Bug ID: 47692
Summary: RealmWorks can not extend a Field after it has been
saved (Context_CC_ContextCallback?)
Product: Wine
Version: 4.14
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: legine(a)gmx.net
Distribution: ---
Despite similar Reports I decided to write an own description. The behavior is
specific to Realm Works. And not really compare able to 38940 or 21483since I
have no crash. I can work on.
Background:
Realmworks is a special Documentation tool for Role playing Adventures and
Campaigns. Basically you enter information to a topic and the tool can link
and extend Information very easily. It is a great tool for Game mastering Pen &
Paper Role playing games.
Issue Description:
1) create an Object where you want to edit something
2) edit a text field. Just enter something.
3) save the object.
4) reopen the Object for extending the text field (if you want to fix something
before it is all fine) the Fronted prints only boxes.
In the Log I see after a short delay following message:
002c:fixme:ole:Context_CC_ContextCallback (001B0430/001B0434)->(017481F0,
042AFB68, {d7174f82-36b8-4aa8-800a-e963ab2dfab9}, 2, 00000000)
002c:fixme:ole:Context_CC_ContextCallback (001B0430/001B0434)->(017481F0,
042AFAEC, {d7174f82-36b8-4aa8-800a-e963ab2dfab9}, 2, 00000000)
0168:fixme:thread:NtQueryInformationThread ThreadIsIoPending info class not
supported yet
0177:fixme:thread:NtQueryInformationThread ThreadIsIoPending info class not
supported yet
0170:fixme:thread:NtQueryInformationThread ThreadIsIoPending info class not
supported yet
An open and close is logged with
0009:fixme:ole:snapshot_QueryGetData (118ABAF0, 0034F198 {cf c075 ptd 00000000
aspect 1 lindex -1 tymed 75})
Thanks for all your work.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47734
Bug ID: 47734
Summary: Free games by Alawar
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: kraisler87(a)yandex.ru
Distribution: ---
Launcher crash after closing.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47638
Bug ID: 47638
Summary: Newsleecher 8.0 Beta 1 - will not start with win7+dxgi
enabled (workaround as winxp)
Product: Wine
Version: 4.14
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: bob.mt.wya(a)gmail.com
Distribution: ---
Created attachment 65073
--> https://bugs.winehq.org/attachment.cgi?id=65073
wine-vanilla-4.14_newsleecher_8_log.txt
The application fails to start in Windows 7 mode, hanging on the splash screen
(and segfaulting in the terminal). No backtrace is generated.
Using the workarounds:
winetricks winxp
wine reg.exe ADD "HKEY_CURRENT_USER\Software\Wine\DllOverrides" "/v" "dxgi"
"/t" "REG_SZ" "/d" ""
enables the application to start normally. I haven't tested further, but it
appears to run OK, with these workarounds. Both workarounds are necessary.
The application attempts to load d3d10 / d3d11 libraries - although it only
generates a regular 2D gui window.
Debug log was generated with:
export
WINEDEBUG=+timestamp,+tid,+loaddll,+module,+seh,+wgl,+d3d,+d3d10,+d3d10core,+d3d11,+dxgi
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47674
Bug ID: 47674
Summary: Changing current system locale for non-Unicode
programs (Maktabah Shamela - arabic language not
showing properly)
Product: Wine
Version: 1.8.6
Hardware: x86
OS: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: svet6ma(a)gmail.com
Created attachment 65127
--> https://bugs.winehq.org/attachment.cgi?id=65127
normal
Greeting you.
Im using MacOS High Sierra. Second day..
I have installed Wine 1.8.6 (then tried 4.0.1)
I need this for executing program named Maktabah Shamela which is also in your
appDB:
https://appdb.winehq.org/objectManager.php?sClass=application&iId=19409
APP Launched with NO Problems. BUT. It doesn't recognize arabic letters
properly.
So you can look there in detailed informations about application (click 3.64)
there are test results.
You can see Workarounds for application there:
______________________________
First of all, to get it display Arabic language properly, follow the
instructions here : https://abuhirr.wordpress.com/2013/12/20/syamilah/
Notice that you may have to uncomment the line "ar_SA.UTF-8" in you
/etc/locale.gen and to run "sudo locale-gen".)
Run "winetricks wsh57 vcrun6".
_______________________________
So. These workarounds as I understand all for linux/ubuntu.
But I cant do it on my Mac.
Generally this application has problem with unicode. In WINDOWS it requires
changing current language for non-unicode programs to Arabic (Saudi Arabia). So
that UTF-8 will read properly.
I have tried many ways to configure this.
winetricks - allfonts / corefonts;
DOS > intl.cp configuration to ar-SA;
registry> machine/system/currentcontrolset/control/nls/locale..
or codepage..
or USER/control panel/international/local..
tried to ad .ttf files manually;
changed safari/view/unicode/ to utf-8 and etc.. forget how much. Working about
more than 10 hours. Nothing WORKS. I will add the proper view of app, and the
one is in my Wine/MacOS.
Any ideas?
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47727
Bug ID: 47727
Summary: directx webinstall
Product: Wine
Version: 4.15
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: seganfl2k(a)gmail.com
Distribution: ---
Created attachment 65202
--> https://bugs.winehq.org/attachment.cgi?id=65202
Gui Fails to LOad
Gui Fails to LOad
VIDEO BELOW
https://youtu.be/OzQt3JuSlUs
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47721
Bug ID: 47721
Summary: CUPS printers without descriptions are not available
to Wine apps
Product: Wine
Version: 4.15
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: spooler
Assignee: wine-bugs(a)winehq.org
Reporter: sluggo(a)unknown.nu
Distribution: ---
CUPS lets you set up printers with names and no descriptions, but if your
printer has no description, it is unavailable to Wine. This seems related to
bug 43734.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47717
Bug ID: 47717
Summary: Main window and side windows do not work properly
Product: Wine
Version: 4.12.1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: ToiZophai(a)yahoo.com
Distribution: ---
To the left and right of the main XMPlay window are sub windows that allow for
configuration of the equalizer (Left sub-window) and playlist (Right
sub-window), along with other various options per sub-window, when the tabs are
double-clicked. When the tabs are double-clicked again to collapse, the
sub-windows collapse, but on TOP of the main window, instead of underneath,
which then make the product unusable... until the sub-windows are reopened and
access to the main window is regained.
Expected function: for the sub-windows to move back under the main window when
collapsing.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=230
--- Comment #19 from Alexandre Julliard <julliard(a)winehq.org> ---
The content of attachment 64885 has been deleted for the following reason:
spam
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47012
Bug ID: 47012
Summary: Photoshop Installer crashes after showing blank window
Product: Wine
Version: 4.5
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: funtimeschaos(a)rocketmail.com
Distribution: ---
Created attachment 64171
--> https://bugs.winehq.org/attachment.cgi?id=64171
wine4.5-staging output
According to the AppDB it is a known problem that PS cannot be installed and a
complete installation needs to be copied from elsewhere, but couldn't find a
bug report on the matter attached to the app or anything that looks like a
dupe, so I'll submit this one.
Tested with 4.5 staging. Logs attached.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47712
Bug ID: 47712
Summary: Spelling Jungle / Yobi's Basic Spelling Tricks --
Black Screen
Product: Wine
Version: 4.14
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: codespunk+bugzilla.wine(a)gmail.com
Distribution: ---
Spelling Jungle / Yobi's Basic Spelling Tricks:
https://en.wikipedia.org/wiki/Spelling_Jungle
16-bit application, requires 8-bit color depth. Game will load and sound will
play but no graphics are drawn to the screen.
Launched with:
https://en.wikipedia.org/wiki/Spelling_Jungle
Xephyr :1 -ac -screen 640x480x8 &
DISPLAY=:1 xterm
...
wine BST.EXE.
I have been unable to test with any other solution besides Xephyr. Tiger-vnc no
longer supports 8-bit, Xnest reports "Unable to find desired default visual",
and xinit fails with 8-bit color depth.
The game runs fine under DOSBox running Windows 3.1 but it's too slow to play
on the laptop I'd like to run it on. Wine may be a solution but at the moment
it fails to display the game graphics.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=19182
Summary: Allow to completely disable MIME-type and application
integration
Product: Wine
Version: 1.1.25
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: diafero(a)arcor.de
Note: I could not find a component "winemenubilder" which is why I selected
"-unknown".
It would be great to have a way to tell wine not to create a whole bunch of
files across the .config and .local directories. I don't want any mime-type
which is registered by a windows application run through wine to reflect on my
system - if I really want to use wine to open a certain filetype (which never
happened so far) I will do that manually. Nor do I want all the unnecessary
start menu entries to be added to my KDE menu - they end up in the wrong
category anyway. I like to have the control of creating these entries myself.
For the menu it worked fine to simply remove the "Wine" menu directory with the
menu editor. The annoying files still got created, but they were ignored.
However now wine started to spam my mime directory, too, and it constantly
re-creates the files in there - a really annoying behaviour. This not only
leads to the danger of me accidentally starting wine without wanting to do so,
it also drives some applications crazy (for example the KDE screenshot
application no longer recognizes ".jpg" to be a JPEG extension since wine added
.jfif).
I understand that many people want wine to just magically integrate into their
Linux environment, but there are also people like me who switched to Linux
because they like to have control, and Windows often prefers its own
preferences over the user's. Wine should really not bring that to Linux, or it
will get as annoying as Windows is. If I could not patch wine myself to no
longer create these files, I had no way to stop all these mime types from being
added, no configuration panel to remove them, nothing. I do not even know which
of my many WINEPREFIXes created the files.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47705
Bug ID: 47705
Summary: Newer versions of the Beat Saber mod injector (BSIPA)
no longer works
Product: Wine
Version: 4.11
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: kernel32
Assignee: wine-bugs(a)winehq.org
Reporter: yshuiv7(a)gmail.com
Distribution: ---
# Context
BSIPA in a mod injector, I don't know the full detail about how it works, but
here is the relevant bits"
1. a proxy winhttp.dll is loaded by the game instead of the real winhttp.dll
2. the proxy does some magic. a mono module is injected into the game.
3. the proxy loads the original winhttp.dll, and proxy the function calls
4. the injected mono code is run, and it tries to call some function in the
proxy winhttp.dll, using [DllImport("winhttp")].
5. step 4 fails with EntryPointNotFoundException.
naturally, to get 1~3 to work, i need to add winhttp=native,builtin override.
# Theory
step 3 causes wine to load the builtin winhttp.dll, and the builtin winhttp.dll
is used from this point on. thus the function called in step 4 is not found.
# Experiment
i changed the override to winhttp=native only, rename the wine builtin
winhttp.dll to winhttp_alt.dll, which is an alternative name the proxy will use
to load winhttp. everything works after that.
# System info
the game was run from steam with proton 4.11-3
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47708
Bug ID: 47708
Summary: Makaron resident evil 2 usa crash
Product: Wine
Version: 4.14
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: seganfl2k(a)gmail.com
Distribution: ---
Created attachment 65180
--> https://bugs.winehq.org/attachment.cgi?id=65180
Makaron resident evil 2 usa crash
Video Below
https://www.youtube.com/watch?v=wPRqndb9e74&feature=youtu.be
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46723
Bug ID: 46723
Summary: Kholat stucks and shows a black screen instead of
playing video
Product: Wine
Version: 4.2
Hardware: x86-64
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: mfplat
Assignee: wine-bugs(a)winehq.org
Reporter: andrey.goosev(a)gmail.com
Distribution: ---
fixme:mfplat:mfeventqueue_BeginGetEvent 0x6ef6c20, 0x80ca320, (nil)
fixme:mfplat:mfsourceresolver_CreateObjectFromURL
(0x6ef8b60)->(L"../../../Kholat/Content/Movies/Startup.mp4", 0x1, (nil),
0x241fb2c, 0x241fb28): stub
fixme:mfplat:mfsession_Close (0x6ef6540)
Disabling mfplat is a workaround.
wine-4.2-195-gf784cabd34
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47610
Bug ID: 47610
Summary: No Man's Sky Crashes to Desktop after ~20 minutes
starting with wine-4.11 (Staging)
Product: Wine
Version: 4.13
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: winebugz(a)kbrm.net
Distribution: ---
Created attachment 65037
--> https://bugs.winehq.org/attachment.cgi?id=65037
Winedbg failure dialog
Affected Wine: 4.11-4.13 Staging
WINEPREFIX: Windows 7 (64-bit)
OpSys: Debian GNU/Linux 9.9 (stretch)
Display: NVIDIA Corporation GK104 [GeForce GTX 670] (rev a1)
Video Driver: nvidia-driver 418.74-1~bpo9+1
DXVK: 1.3.2 OR uninstalled (does not seem to affect symptom)
No Man's Sky [Steam X.XX] [NMS BildID: 3397908] crashes to desktop randomly
anytime after 20-30 minutes of surface exploration or every time inter-planet
flight is attempted. Winedbg does not catch or record crash. Uncertain what the
trigger event is, but Traveling in Ship to any other in-system planet will
always trigger the crash. But will also happen randomly in-game after the
20-minute mark.
Absolutely reproducible for me by loading saved game - launching ship - fly
towards closest planet. Game will crash just after launch, or mid-flight, or
even as the pulse engines shut off pre-landing - but always - cannot get to
surface of destination planet.
Issue does not occur in 4.10 Staging - with that version installed I can play
for multiple hours (2+ hrs on last run) without any issues.
Debug steps so far:
Used Steam verify game files function - no issues found
Deleted contents of Shader Cache and forced game to re-update (known crash
issue)
Verified my CPU supports sse4_1 (known crash issue)
Un-installed DXVK fron WINEPREFIX - no change in behavior in any version of
wine after 4.10 staging [4.10 + DXVK = OK]
Downgraded wine (Staging) in steps from 4.13 down to 4.10 - running "wineboot
-u" each time before testing
Problem goes away in 4.10 Staging - occurs in everything above that
Cannot seem to get winedbg to capture output - followed the instructions here:
https://wiki.winehq.org/Winedbg -
Got winedbg attached to the NME.exe wpid and game was running, when it crashed
"in flight" and all I got was:
"Process of pid=011c has terminated"
Wine-dbg>bt
You must be attached to a process to run this command.
Not sure what else to include since wine is not trapping this crash?
Willing to try anything to test/resolve as downgrading to 4.10 breaks all of my
Blizzard games.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47684
Bug ID: 47684
Summary: Pressing CTRL+F in regedit & entering text will not
enter anything in the input box
Product: Wine
Version: 4.14
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: programs
Assignee: wine-bugs(a)winehq.org
Reporter: madebr(a)gmail.com
Distribution: ---
When wanting to find a string in the hive by pressing CTRL+F and start entering
the text,
nothing appears in the input box.
I expect the entered text to appear in the input box.
How to reproduce:
1. Start regedit (`wine regedit`)
2. Press CTRL+F
3. Enter your text
This works:
1. Start regedit (`wine regedit`)
2. Press CTRL+F
3. Hover with your mouse inside (or outside) the find window
4. Enter your text
So it appears some
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=34830
Bug #: 34830
Summary: rpcrt4:cstub fails and crashes on Windows 8
Product: Wine
Version: 1.7.5
Platform: x86
OS/Version: Windows
Status: NEW
Severity: normal
Priority: P2
Component: rpc
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: fgouget(a)codeweavers.com
Classification: Unclassified
The rpcrt4:cstub conformance test has a number of test failures and crashes on
Windows 8:
cstub.c:519: Test failed: QueryInterfacevtbl 1 not updated 776C2F4B 76085EBB
cstub.c:520: Test failed: AddRefvtbl 1 not updated 776BF425 76085ECE
cstub.c:524: Test failed: Invokevtbl 1 not updated 776BF839 7607CC41
cstub.c:525: Test failed: IsIIDSupportedvtbl 1 not updated 776CF314 76102697
cstub.c:527: Test failed: DebugServerQueryInterfacevtbl 1 not updated 776CF2ED
76102671
cstub.c:528: Test failed: DebugServerReleasevtbl 1 not updated 776C767F
76102684
cstub.c:530: Test failed: QueryInterfacevtbl 2 not updated 776C2F4B 76085EBB
cstub.c:531: Test failed: AddRefvtbl 2 not updated 776BF425 76085ECE
cstub.c:533: Test failed: Connectvtbl 2 not updated 776CF28C 7610264B
cstub.c:534: Test failed: Disconnectvtbl 2 not updated 776BF0D3 7607CC1B
cstub.c:535: Test failed: Invokevtbl 2 not updated 776BF839 7607CC41
cstub.c:536: Test failed: IsIIDSupportedvtbl 2 not updated 776CF314 76102697
cstub.c:537: Test failed: CountRefsvtbl 2 not updated 776CF2D2 7610265E
cstub.c:538: Test failed: DebugServerQueryInterfacevtbl 2 not updated 776CF2ED
76102671
cstub.c:539: Test failed: DebugServerReleasevtbl 2 not updated 776C767F
76102684
cstub.c:541: Test failed: QueryInterfacevtbl 3 not updated 776C2F4B 76085EBB
cstub.c:542: Test failed: AddRefvtbl 3 not updated 776BF425 76085ECE
cstub.c:546: Test failed: Invokevtbl 3 not updated 776BF839 7607CC41
cstub.c:547: Test failed: IsIIDSupportedvtbl 3 not updated 776CF314 76102697
cstub.c:549: Test failed: DebugServerQueryInterfacevtbl 3 not updated 776CF2ED
76102671
cstub.c:550: Test failed: DebugServerReleasevtbl 3 not updated 776C767F
76102684
cstub.c:564: Test failed: wrong proxy 1 func 0 776BF1AA/76080EFB
cstub.c:565: Test failed: wrong proxy 1 func 1 776BF4CB/7607CC2E
cstub.c:566: Test failed: wrong proxy 1 func 2 776BF16A/7607CBF5
cstub.c:584: Test failed: wrong proxy 3 func 0 776BF1AA/76080EFB
cstub.c:585: Test failed: wrong proxy 3 func 1 776BF4CB/7607CC2E
cstub.c:586: Test failed: wrong proxy 3 func 2 776BF16A/7607CBF5
cstub.c:755: this is the last test seen before the exception
cstub: unhandled exception c0000005 at 775CB76F
The crash happens in this call of create_proxy_test():
create_proxy_test( ppsf, &IID_if2, if2_proxy_vtbl.Vtbl );
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47050
Bug ID: 47050
Summary: typedef'd anonymous structs typedef'd names are not
used in interface methods
Product: Wine
Version: 4.5
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: rpc
Assignee: wine-bugs(a)winehq.org
Reporter: richard(a)torproject.org
Distribution: ---
The widl (and midl) tool generate a unique name for anonymous structs, but midl
also includes the typedef'd name and uses it for interface methods. With the
following struct definition:
typedef struct {
long data;
} Bar;
widl function signatures like this:
void _stdcall doBaz([in] __WIDL_TypedefBug_generated_name_00000000* b);
while midl generates this:
void _stdcall doBaz([in] Bar* b);
min-repro:
https://github.com/pospeselr/mingw-widl-bug/tree/typedef_bug
Includes tlb generated by widl 4.5 and midl 8.01.0622
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=43387
Bug ID: 43387
Summary: valgrind shows several definite leaks in
dlls/windowscodecs/tests/metadata.c
Product: Wine
Version: 2.12
Hardware: x86
OS: Linux
Status: NEW
Keywords: download, source, testcase, valgrind
Severity: normal
Priority: P2
Component: windowscodecs
Assignee: wine-bugs(a)winehq.org
Reporter: austinenglish(a)gmail.com
Distribution: Gentoo
==2263== 16 bytes in 1 blocks are definitely lost in loss record 116 of 603
==2263== at 0x7BC51061: notify_alloc (heap.c:254)
==2263== by 0x7BC5554F: RtlAllocateHeap (heap.c:1716)
==2263== by 0x4BBB1B1: MetadataQueryReader_CreateInstance
(metadataquery.c:624)
==2263== by 0x4BBAE68: mqr_GetMetadataByName (metadataquery.c:540)
==2263== by 0x4A3A786: IWICMetadataQueryReader_GetMetadataByName
(wincodec.h:1605)
==2263== by 0x4A3A786: test_metadata_gif (???:0)
==2263== by 0x4A40077: func_metadata (metadata.c:3077)
==2263== by 0x4A51AF9: run_test (test.h:603)
==2263== by 0x4A51F58: main (test.h:687)
==2263==
==2263== 64 bytes in 4 blocks are definitely lost in loss record 300 of 603
==2263== at 0x7BC51061: notify_alloc (heap.c:254)
==2263== by 0x7BC5554F: RtlAllocateHeap (heap.c:1716)
==2263== by 0x4BBB1B1: MetadataQueryReader_CreateInstance
(metadataquery.c:624)
==2263== by 0x4BBAE68: mqr_GetMetadataByName (metadataquery.c:540)
==2263== by 0x4A3F47F: IWICMetadataQueryReader_GetMetadataByName
(wincodec.h:1605)
==2263== by 0x4A3F47F: test_queryreader (???:0)
==2263== by 0x4A4003B: func_metadata (metadata.c:3065)
==2263== by 0x4A51AF9: run_test (test.h:603)
==2263== by 0x4A51F58: main (test.h:687)
==2263==
==2263== 212 bytes in 1 blocks are definitely lost in loss record 446 of 603
==2263== at 0x7BC51061: notify_alloc (heap.c:254)
==2263== by 0x7BC5554F: RtlAllocateHeap (heap.c:1716)
==2263== by 0x7B44A252: HeapAlloc (heap.c:271)
==2263== by 0x7B44A53F: GlobalAlloc (heap.c:389)
==2263== by 0x4A3040D: create_stream (metadata.c:208)
==2263== by 0x4A3768B: test_metadata_gif (metadata.c:1340)
==2263== by 0x4A40077: func_metadata (metadata.c:3077)
==2263== by 0x4A51AF9: run_test (test.h:603)
==2263== by 0x4A51F58: main (test.h:687)
==2263==
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22383
Summary: Dragon Age: Origins - massive flickering when
StrictDrawOrdering is disabled
Product: Wine
Version: 1.1.43
Platform: x86-64
OS/Version: Linux
Status: NEW
Keywords: regression
Severity: minor
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
CC: hverbeet(a)gmail.com
Using wine-1.1.42-390-g4fc6512 + the patch from bug 22202, there is massive
flickering of vertical black lines across the intro video. Disabling
StrictDrawOrdering fixes it.
Can't seem to get a screenshot, but if you really need one, let me know.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=42681
Bug ID: 42681
Summary: Regression: Graphics/Texture no longer render
correctly in Reflex Arena
Product: Wine
Version: 2.4
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: directx-d3dx11
Assignee: wine-bugs(a)winehq.org
Reporter: firestarw(a)gmail.com
Distribution: ---
Game is Reflex Arena (https://www.reflexarena.com/) a DX10 game that that
requires steam to run
When in game in a map, in wine versions 2.0 and 2.1, the game renders ok (not
fully normal compared to windows but playable)
Screenshot (map is aerowalk):
https://cdn.discordapp.com/attachments/266419049372581889/29354471255035084…
>From wine version 2.2 onwards, the graphics render as black
Screenshot from wine 2.4 (map is aerowalk):
https://cdn.discordapp.com/attachments/266419049372581889/29354470385988403…
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46315
Bug ID: 46315
Summary: Vypress Chat 2.1.9 MSI installer crashes without
native jscript
Product: Wine
Version: 4.0-rc2
Hardware: x86
OS: Linux
Status: NEW
Keywords: download, Installer
Severity: normal
Priority: P2
Component: jscript
Assignee: wine-bugs(a)winehq.org
Reporter: dark.shadow4(a)web.de
Distribution: ---
The installer crashes with a "fatal error", unless native jscript is used.
See the linked ReactOS ticket for a download.
winetricks wsh57 fixes the issue.
Part of the log:
> 002d:fixme:msi:AutomationObject_GetIDsOfNames Unknown member L"e", clsid {000c109e-0000-0000-c000-000000000046}
> 002d:fixme:jscript:JSGlobal_Enumerator
> 0027:err:msi:ITERATE_Actions Execution halted, action L"VypressUpgradeEx" returned 1603
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45420
Bug ID: 45420
Summary: Titanfall 2 Multiplayer mode stuck on Attempting
Connection
Product: Wine
Version: 3.11
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: bcrypt
Assignee: wine-bugs(a)winehq.org
Reporter: alex.skatingcassano(a)gmail.com
Distribution: ---
Created attachment 61738
--> https://bugs.winehq.org/attachment.cgi?id=61738
Console log with and without WINEDEBUG=+bcrypt
In Titanfall 2, after clicking "Multiplayer" in the menu, the game gets stuck
on "Attempting Connection". Console output with and without WINEDEBUG=+bcrypt
in attachment. Tested with WineD3D and DXVK, both leading to the same result.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47494
Bug ID: 47494
Summary: SuperTux: Fullscreen mode not working on MacOSX
(Invalid monitor handle)
Product: Wine
Version: 4.12.1
Hardware: x86-64
OS: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: tobbi.bugs(a)googlemail.com
When I try to run SuperTux in fullscreen mode, on OS X, the window gets hidden.
$ wine --version
wine-4.12.1
$ openssl sha256 SuperTux-v0.6.0-win32.msi
SHA256(SuperTux-v0.6.0-win32.msi)=
d81ac0ad043a17019d9c71fcaec4839620efd445feedc4b35f3379f8cb3c2069
Steps to reproduce:
1. Install SuperTux 0.6.0 from
https://github.com/SuperTux/supertux/releases/download/v0.6.0/SuperTux-v0.6…
2. Start the game, go to Settings, put a check mark next to "Full screen".
Result: Window is hidden, music plays.
Expected: Window is shown.
Console displays the following:
002d:err:display:macdrv_GetMonitorInfo invalid monitor handle
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47041
Bug ID: 47041
Summary: wire_marshal attribute ignored and the underlying type
is used instead
Product: Wine
Version: 3.2
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: rpc
Assignee: wine-bugs(a)winehq.org
Reporter: richard(a)torproject.org
Distribution: ---
Assuming the following idl snippet:
typedef struct _FooWindowHandle {long data1; long data2;};
typedef [unique] FooWindowHandle * fooWH;
cpp_quote("#if 0")
typedef [wire_marshal(fooWH)] void* WH;
cpp_quote("#endif // 0")
The wire_marshal attribute appears to be ignored, and for interfaces using the
WH type, void* is used instead. As _FooWindowHandle ends up not being used, its
definition is not included in the final tlb.
I've created a branch with a min-repro here:
https://github.com/pospeselr/mingw-widl-bug/tree/wire_marshal_bug
This branch includes the typelib generated by the midl.exe version 8.01.0622
from the VS 2019 SDK. Also note that I'm working against version 3.2 today, but
this issue also occurs in version 4.5.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41752
Bug ID: 41752
Summary: Need For Speed Most Wanted 2012 Corrupted Models &
Textures in Game
Product: Wine
Version: 1.9.23
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: directx-d3dx11
Assignee: wine-bugs(a)winehq.org
Reporter: Adix.me(a)gmail.com
Distribution: ---
Created attachment 56193
--> https://bugs.winehq.org/attachment.cgi?id=56193
Need For Speed Most Wanted 2012 Debug Log File
Need For Speed Most Wanted 2012 - In Game has corrupted Textures & Models,
complains about VSSetShader Dynamic linking is not implemented yet, PSSetShader
Dynamic linking is not implemented yet and OMSetBlendState Per-rendertarget
blend not implemented and WINED3D_RTYPE_TEXTURE_1D not implemented.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47661
Bug ID: 47661
Summary: SwanSoft CNC: Crashes when clicking "tools management"
button
Product: Wine
Version: unspecified
Hardware: x86
OS: Mac OS X
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: hassanabdul(a)me.com
Created attachment 65104
--> https://bugs.winehq.org/attachment.cgi?id=65104
Details of the problem in the program
Wine crashes only when using the specific "Tools Management" button.
The rest of the software works very well.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=33834
Bug #: 33834
Summary: user32: multiline edit control renders tabs not
correctly using usp10
Product: Wine
Version: 1.6-rc2
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P3
Component: user32
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: bernhardu(a)vr-web.de
Classification: Unclassified
Created attachment 44856
--> http://bugs.winehq.org/attachment.cgi?id=44856
minimal test program
An multiline edit control from user32 with custom tab widths set by window
message EM_SETTABSTOPS gets the tabs not rendered correctly.
Only the first and the last "column" is visible.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47633
Bug ID: 47633
Summary: Guild Wars quits silently after the splash screen
Product: Wine
Version: 4.14
Hardware: x86
OS: Linux
Status: NEW
Keywords: regression
Severity: normal
Priority: P2
Component: kernel32
Assignee: wine-bugs(a)winehq.org
Reporter: gyebro69(a)gmail.com
CC: julliard(a)winehq.org
Regression SHA1: 0116660dd80b38da8201e2156adade67fc2ae823
Distribution: ArchLinux
Created attachment 65065
--> https://bugs.winehq.org/attachment.cgi?id=65065
plain terminal output
After starting Guild Wars I can see the "Connecting to ArenaNet..." screen for
a moment then the game quits abruptly.
This was caused by commit 0116660dd80b38da8201e2156adade67fc2ae823 (the game
starts properly with the previous commit).
Please let me know if you need debug logs.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=38245
Bug ID: 38245
Summary: Constrcuct2 can't create a localhost server - httpapi
stubs
Product: Wine
Version: 1.7.36
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: blurymind(a)gmail.com
Distribution: ---
Created attachment 51055
--> https://bugs.winehq.org/attachment.cgi?id=51055
terminal log file
Constrcut2 works almost flawlessly now. You can edit the games and export the
games. They work.
But you can not playtest the games, because wine fails to create a localhost
server and launch the web browser with it.
Here the part when I try to run the localhost server in the terminal Log:
fixme:httpapi:HttpAddUrl ((nil), L"http://127.0.0.1:5099/", (nil)): stub!
fixme:httpapi:HttpAddUrl ((nil), L"http://127.0.0.1:5100/", (nil)): stub!
fixme:httpapi:HttpCreateHttpHandle (0x14819d8, 0): stub!
fixme:httpapi:HttpAddUrl ((nil), L"http://localhost:5000/", (nil)): stub!
fixme:httpapi:HttpAddUrl ((nil), L"http://localhost:5001/", (nil)): stub!
And this is just from one of my tests. I tried with local host server addresses
..
Exporting them takes minutes and that is just not an option when developing a
game - you need to run it in your browser immediately. Plus you can't debug the
game when exporting, then running - no debugger.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47523
Bug ID: 47523
Summary: KERNEL32.dll.EnumSystemFirmwareTables
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: api-ms-win-*
Assignee: wine-bugs(a)winehq.org
Reporter: skas00(a)gmail.com
Distribution: ---
A recent patch to everquest (7-17-2019) uses ms-api-sysinfo call via
kernel32.dll
This function is not yet implemented and results in error:
wine: Call from 0x7bc84e49 to unimplemented function
KERNEL32.dll.EnumSystemFirmwareTables, aborting
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40868
Bug ID: 40868
Summary: World of Warcraft ; seh:RtlCaptureStackBackTrace stub
Product: Wine
Version: 1.9.13
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: blue-t(a)web.de
Distribution: ---
Created attachment 54930
--> https://bugs.winehq.org/attachment.cgi?id=54930
Log with that exception
World of Warcraft 7 , aka the current Legion expansion beta realm version,
is quite agressive with seh:RtlCaptureStackBackTrace missing.
That occurs with both d3d9 and d3d11 rendering engines enabled.
fixme:seh:RtlCaptureStackBackTrace (0, 60, 0x23f8e0, 0x23f7c0) stub!
Not sure where that comes from as the live version seems to be a lot more
quiet.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47563
Bug ID: 47563
Summary: Sforzando Sample Player works but GUI is blank
(unusable)
Product: WineHQ Apps Database
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: appdb-unknown
Assignee: wine-bugs(a)winehq.org
Reporter: linuxguy93(a)gmail.com
Distribution: ArchLinux
Created attachment 64964
--> https://bugs.winehq.org/attachment.cgi?id=64964
A zip archive of sforzando's output. One for normal output and one for output
with d2d being debugged.
Sforzando's GUI using any version of wine produces a blank, but working GUI on
Archlinux. It seems to be a d2d issue combined with the way OpenGL core
contexts are exposed in mesa on Archlinux. Sforzando can be found here:
https://www.plogue.com/downloads.html Aria Engine:
http://ariaengine.com/support/aria-engine-update/
Hardware:
CPU: Intel Ivy Bridge 3570K
GPU: AMD RX460
32 GB DDR3 Ram
Software:
OS: Arch Linux
Kernel: 5.2.3
mesa: 19.1.3
wine: 4.12.1
app version: sforzando 1.952 (aria engine version as well)
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=44958
Bug ID: 44958
Summary: Epic Games Launcher requires DebugCreate (dbgeng)
Product: Wine
Version: 3.5
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: roothorick(a)gmail.com
Distribution: ---
Created attachment 61066
--> https://bugs.winehq.org/attachment.cgi?id=61066
Log snippet showing error
#41258 appears to be fixed in staging, but the launcher still doesn't come up.
Found the smoking gun pretty quickly; it immediately bails when DebugCreate()
(currently a complete stub) returns error (snippet from log with err,warn,fixme
attached).
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47035
Bug ID: 47035
Summary: widl generates typelib file with enums multiply
defined
Product: Wine
Version: 4.5
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: rpc
Assignee: wine-bugs(a)winehq.org
Reporter: richard(a)torproject.org
Distribution: ---
When generating typelibs from idl where enums are defined, the generated tlb
ends up with a copy of the enum definition for every instance that the enum is
mentioned as a parameter to a function, plus 1.
I've created a branch with a min-repro here:
https://github.com/pospeselr/mingw-widl-bug/tree/enum_bug
Once again, update the Makefile to point to your local copy of widl.
I tested this with the latest mingw ( commit
c61763cc740f8f4986755eeafce832baa3655ee8 ) which uses widl version 4.5 plus
I've applied the patch from https://bugs.winehq.org/show_bug.cgi?id=47031
(note: this issue occurs even without the patch applied).
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47149
Bug ID: 47149
Summary: widl generates invalid C headers when user-defined
structs also have const typedef'd names
Product: Wine
Version: 4.6
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: tools
Assignee: wine-bugs(a)winehq.org
Reporter: richard(a)torproject.org
Distribution: ---
Found this one while working on patch for #47035
With an idl snippet like so:
struct foo {};
typedef struct foo foo_t;
typedef const struct foo cfoo_t;
the generated header will contain:
struct foo {
};
typedef struct foo foo_t;
// redefinition of struct foo and discards const qualifier
typedef struct foo {
} cfoo_t;
This bug seems like it will be fixed once the patch for #47035 lands.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47698
Bug ID: 47698
Summary: Battlefield 1 crashes/shows error when launchin with
DX12/VKD3D
Product: vkd3d
Version: 1.1
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: vkd3d
Assignee: wine-bugs(a)winehq.org
Reporter: rajaleicht(a)gmail.com
Distribution: ---
Created attachment 65162
--> https://bugs.winehq.org/attachment.cgi?id=65162
shows error
look at attachment
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47697
Bug ID: 47697
Summary: wine causes system to hang on shutdown or reboot on
arch
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: mahmoud.elswerky(a)gmail.com
Distribution: ---
Created attachment 65157
--> https://bugs.winehq.org/attachment.cgi?id=65157
screenshot
i face an issue on arch linux and manjaro where whener i shutdown or reboot .
system hans asking me to wait for 90 second
` stop job is running for session 4 of user elswerky`
and have to wait for 90 second to be able to shutdown pc
i don't know why this happens with me but what noticed is that it happens if
have wine me wine server and a wimdindows app working on the session before
rebooting or shutting down
inu use lateat version of wine on arch 4.13
and installed winindows app on wine is internet download manager
now am 95 % siure that the hang on shutdown is related to wine and it's
proocesses
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47694
Bug ID: 47694
Summary: mouse pointer disappears
Product: Wine
Version: 4.0.2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: drctheboss(a)charter.net
CC: drctheboss(a)charter.net
Distribution: Mint
The mouse pointer disappears whenever it enters the area the program is running
in.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47645
Bug ID: 47645
Summary: Royal Quest: black screen and/or black or missing
textures
Product: Wine
Version: 4.14
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: spoon0042(a)hotmail.com
Distribution: ---
Since 4.14 the launch screen is black with cursor. I was able to click blindly
and get into the game where some textures appear at least.
Regression test gives:
e795ddb3d80d7b94d29cf97a24a01bb157b0138d is the first bad commit
commit e795ddb3d80d7b94d29cf97a24a01bb157b0138d
Author: Henri Verbeet <hverbeet(a)codeweavers.com>
Date: Tue Aug 6 01:23:16 2019 +0430
wined3d: Store clip control support in struct wined3d_d3d_info.
Signed-off-by: Henri Verbeet <hverbeet(a)codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard(a)winehq.org>
:040000 040000 e30ce5a41e66389a4d47eb51a074eea3448c24e5
c758d10d382595dec61f6883b55a0df603269477 M dlls
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47592
Bug ID: 47592
Summary: HFSS antenna modelling software running but erroneous
output !
Product: Wine
Version: 3.0.2
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: friedtj(a)free.fr
Distribution: ---
I wanted to share with this community a rather amazing observation
that has been baffling me for the last week: ANSYS HFSS 13.02 is
running with Wine, but the output is erroneous ! I can hardly imagine
how a calculation can be completed but yield incorrect results: my
understanding
is that a library (or API implementation) either works or does not -- and to
tell the truth I did not expect such a complex piece of software as HFSS to
run on Wine -- but it does and rather nicely except to the point of analyzing
the
results.
Being new to HFSS but quite familiar with antenna design, I started with the
trivial test case of the dipole antenna: resonance frequency was close to the
expected value considering the dimensions, so the software must be working
properly since it computes admittances (see http://jmfriedt.org/S11both.pdf,
green curve)
which are consistent with the values given by (FOSS) NEC2 and GPRMax3D.
However all attempts to plot the radiation pattern failed (no plot at all, or
sometimes
inconsistent results of an isotropic radiator with no null), and radiation
efficiency
was consistently 0 (a poor result for a classical antenna), so I was of course
questioning my ability to understand the proper operation of the software.
After
attempting all possible solutions, I ended up installing a Win7 system on
VirtualBox
for testing, and to my amazement the software yields the proper radiation
diagram (http://jmfriedt.org/diagramme_3D.png) and slightly different
reflection
coefficients (http://jmfriedt.org/S11both.pdf, purple curve), the difference
being
emphasized on the impedance curve (http://jmfriedt.org/Z11_both.pdf).
I am of course not blaming the amazing emulator on this difference, but with
this
post
1/ may point out a subtle misbehavior of one of the computation library used by
Wine
2/ help others attempting to run HFSS on Wine question the results they
achieve.
These tests were completed with wine-3.0.2 as provided by Debian GNU/Linux
Unstable
at the time of writing this post, configured (winecfg) either as Win10 or Win7,
fresh
install with no other MS-Windows or proprietary library installed prior to HFSS
(clean
$HOME/.wine directory).
Not sure how I can help debug,
best wishes, Jean-Michel
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13610
Summary: DragonRiders: main character, dragon and sky appear
black
Product: Wine
Version: 1.0-rc3
Platform: Other
URL: http://appdb.winehq.org/objectManager.php?sClass=version
&iId=8946
OS/Version: other
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: rainmaker(a)icgag.it
Created an attachment (id=13574)
--> (http://bugs.winehq.org/attachment.cgi?id=13574)
How it looks in Wine
The main character and the dragon in the DragonRiders game appear completely
black except for their eyes, as if they had no texture applied (check the
attached screenshots). From a bird's view of the village at the beginning, it
looks like the sky suffers from the same problem. I couldn't verify whether
this applies to other characters in the game as well or not, since I only
played for a few minutes.
The same bug happens in Cedega as well.
I can only guess it's some kind of chroma key problem (as the one in Ultima
IX), but the game cannot be configured with respect to that. The only hint is a
debug error that floods the console (check attached log):
err:d3d_surface:IWineD3DBaseSurfaceImpl_BltFast DXTC decompression not
supported by now
but I don't know if it might be related. There's also a message concerning an
unsupported Stippled Alpha feature.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26617
Summary: Need for Speed Shift 2: large black squares appear in
cockpit, obscuring much of the screen
Product: Wine
Version: 1.3.16
Platform: x86
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: directx-d3d
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: dank(a)kegel.com
It's as if part of the screen is censored.
The black blocks usually show up after about twenty or forty seconds of
racing. They're there even on lowest settings. Makes game unplayable.
There are quite a few messages like this:
fixme:d3d_surface:surface_load_location Downloading RGB surface 0x79f9eb50 to
reload it as sRGB.
fixme:d3d_surface:IWineD3DBaseSurfaceImpl_Blt Filter WINED3DTEXF_LINEAR not
supported in software blit.
fixme:d3d_surface:IWineD3DBaseSurfaceImpl_Blt Stretched blit not implemented
for bpp 64!
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41260
Bug ID: 41260
Summary: Z-Fighting on character models during cutscenes in
SW:TOR
Product: Wine
Version: 1.9.17
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: darkwingbuck13(a)gmail.com
Distribution: ---
Created attachment 55560
--> https://bugs.winehq.org/attachment.cgi?id=55560
An example of the problem
When entering a cutscene in SWTOR, the animated models for characters will have
black flickering spots appear and disappear in a frame during cutscenes. I
cannot find anything in a debug log that would give a reason for this to
happen. All settings are on Ultra. It is incredibly hard to screenshot and show
the problem, but I've attached what I could get.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.