http://bugs.winehq.org/show_bug.cgi?id=36668
Bug ID: 36668
Summary: Under Wine, Installation of Hotspot Shield
Fails/Crashes
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: bugs(a)piouseye.com
Created attachment 48713
--> http://bugs.winehq.org/attachment.cgi?id=48713
Report Generated By Wine @ Failure
Hotspot Shield crashes during installation. This does not SEEM to be the same
issue as in Bug 16002 or other "Possible Duplicates," so I'm passing along the
report Wine generated.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=37543
Bug ID: 37543
Summary: Stickies 8.0 - visual glitches
Product: Wine
Version: 1.7.30
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: jfbxehupf(a)jadamspam.pl
Distribution: ---
Created attachment 49964
--> https://bugs.winehq.org/attachment.cgi?id=49964
Last line cut
There are problems:
1. last line is cut in the middle
2. after removing content and adding it again, I' having less than full width
available (it seems to wrap too early)
3. when receiving links in stickies from other people there's no content
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=50225
Bug ID: 50225
Summary: Unhandled exception: page fault on read access to
0x00000000 in 32-bit code when attempting to install
Splice
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: deliev.a(a)gjh.sk
Distribution: ---
Created attachment 68730
--> https://bugs.winehq.org/attachment.cgi?id=68730
Log
Attempting to install InstallSplice.exe, downloaded from
https://splice.com/download
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=26326
Summary: Add .desktop shortcut files for winecfg and wine
uninstaller
Product: Wine
Version: 1.3.15
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wooptoo(a)gmail.com
It would be nice if wine had .desktop shortcut files for "winecfg" and "wine
uninstaller". These two are the most useful applications bundled with wine.
This way users will know about them.
Ubuntu has this by default and they are placed in the wine menu.
Also, a default icon for wine would be nice (placed in /usr/share/icons or
/usr/share/pixmaps).
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41242
Bug ID: 41242
Summary: Unhandled exception: page fault on read access to
0xffffffff in 32-bit code (0x7d3a1aad). when trying to
load
Product: Wine
Version: 1.6-rc2
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: ldc7675(a)yahoo.com
Distribution: ---
Created attachment 55537
--> https://bugs.winehq.org/attachment.cgi?id=55537
imsdesign doublecad program fails on load backtrace
Doublecad serial number DCAK-6746-0366-4350-3180
link to program https://www.turbocad.com/doublecad-download
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58166
Bug ID: 58166
Summary: misexec.exe crashes on Corel app install
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: tacosleaze(a)gmail.com
Distribution: ---
Created attachment 78450
--> http://bugs.winehq.org/attachment.cgi?id=78450
Screen shot of error
I keep getting this error that msiexec.exe has encountered a serious problem.
I am trying to install Corel Graphics Suite X3 into Ubuntu.
Thank you in advance.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=49672
Bug ID: 49672
Summary: Mesen Nes Emulator Crashes on Startup
Product: Wine
Version: 2.21
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: xsonesbackup(a)gmail.com
Distribution: ---
Created attachment 67912
--> https://bugs.winehq.org/attachment.cgi?id=67912
Crash info - backtrace.txt
Mesen NES emulator crashes on startup (does not load)
I think my wine version is 2.21 not sure though.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=48874
Bug ID: 48874
Summary: Faststone Image Viewer - pencil colour is black so
wrong component
Product: Wine
Version: 5.5
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: phil4000n(a)gmail.com
Distribution: ---
Created attachment 66809
--> https://bugs.winehq.org/attachment.cgi?id=66809
FSViewer 75 pencil colour bug
FSViewer75
Wine55 with wine-mono
Current behaviour:
When using the drawing tools, such as rectangle, lines, etc. it is possible to
select the colour of the contour.
There is no issue, but with PENCIL
Whatever colour you pick, PENCIL stays black.
Expected behaviour:
Like under Windows, pencil colour must apply.
Very strange that only pencil is affected by this bug.
Attached:
Video to illustrate the issue
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=48872
Bug ID: 48872
Summary: Faststone Image Viewer doesn't show file names
Product: Wine
Version: 5.5
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: phil4000n(a)gmail.com
Distribution: ---
Created attachment 66805
--> https://bugs.winehq.org/attachment.cgi?id=66805
FSViewer 75 bug description
FSViewer75
Wine55 with wine-mono
Strangely, in the viewpane the image file names do not appear, while when
hovering on an image it does display it.
see attached picture
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=22634
Summary: Yahoo! Widgets will not display EULA
Product: Wine
Version: 1.1.43
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: gdiplus
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: wwarsin(a)gmail.com
Created an attachment (id=27820)
--> (http://bugs.winehq.org/attachment.cgi?id=27820)
$wine YahooWidgets.exe
After the Yahoo! widget engine is install the first time it runs it asks you to
accept the EULA, which will not show... This is kind of hard to explain but its
like the yahoowidgets.exe does open, and you can mouse over the area and you
can click the "I accept" button and it will the go to open the widgetengine
(from what i breifly saw it worked fine)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58163
Bug ID: 58163
Summary: WINTAB32.dll: AzPainter2 pressure does not work with
pen tablet
Product: Wine
Version: 10.6
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: winex11.drv
Assignee: wine-bugs(a)winehq.org
Reporter: axis6404(a)proton.me
Distribution: ---
AzPainter2 pressure does not work with pen tablet.
The bug is here.
https://github.com/wine-mirror/wine/blob/f7503d0a996ae1243dd6c87b39a9143624…
or
https://github.com/wine-mirror/wine/blob/f7503d0a996ae1243dd6c87b39a9143624…
(button_state & 0x01) or XQueryDeviceState's (XButtonState.buttons[0] & 0x01)
appears to be unused.
Shifting the above "button_state" 1bit to the right fixed it.
Case XP-Pen Deco 01 v2 (and Unknown old pen tablet)
When the pen is released:
WT_PACKET's buttons 0x0
When you are drawing with the pen pressed against the board:
WT_PACKET's buttons 0x2
Pen lower button:
WT_PACKET's buttons 0x4
Pen top button:
WT_PACKET's buttons 0x8
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=57686
Bug ID: 57686
Summary: Thief (2014) requires
'GroupMemoryBarrierWithGroupSync' support
Product: vkd3d
Version: 1.14
Hardware: x86-64
OS: Linux
Status: NEW
Severity: minor
Priority: P2
Component: hlsl
Assignee: wine-bugs(a)winehq.org
Reporter: andrey.goosev(a)gmail.com
Distribution: ---
09b4:err:d3dcompiler:D3DCompile2 Failed to compile shader, vkd3d result -4.
09b4:err:d3dcompiler:D3DCompile2 Shader log:
09b4:err:d3dcompiler:D3DCompile2
..\..\Engine\\Shaders\Compute\DoFBlurBGCS.hlsl:35:51: E5000: Invalid subscript
"Length".
09b4:err:d3dcompiler:D3DCompile2
..\..\Engine\\Shaders\Compute\DoFBlurBGCS.hlsl:35:5: E5002: Can't implicitly
convert from <error type> to int.
09b4:err:d3dcompiler:D3DCompile2
..\..\Engine\\Shaders\Compute\DoFBlurBGCS.hlsl:42:83: E5000: Invalid subscript
"Length".
09b4:err:d3dcompiler:D3DCompile2
..\..\Engine\\Shaders\Compute\DoFBlurBGCS.hlsl:43:83: E5000: Invalid subscript
"Length".
09b4:err:d3dcompiler:D3DCompile2
..\..\Engine\\Shaders\Compute\DoFBlurBGCS.hlsl:44:83: E5000: Invalid subscript
"Length".
09b4:err:d3dcompiler:D3DCompile2
..\..\Engine\\Shaders\Compute\DoFBlurBGCS.hlsl:45:83: E5000: Invalid subscript
"Length".
09b4:err:d3dcompiler:D3DCompile2
..\..\Engine\\Shaders\Compute\DoFBlurBGCS.hlsl:46:1: E5005: Function
"GroupMemoryBarrierWithGroupSync" is not defined.
09b4:err:d3dcompiler:D3DCompile2
1.14-278-ga082daeb
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=49063
Bug ID: 49063
Summary: missing parts of contents of downlaod page of files
Product: Wine
Version: 5.7
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: mahmoud.elswerky(a)gmail.com
Distribution: ---
Created attachment 67041
--> https://bugs.winehq.org/attachment.cgi?id=67041
screenshot shows that most of downlaod page contents are missing
I usually use wine to run internet downlaod manager on linux
but since last 3 updates of idm ,, the downlaod popup page of idm doesn't show
full contents
some parts are misssing
if i installed old version of idm it is working fine
but latest 3 updates shows this bug
i don't know what is the cause of this
but hope you can find its cause and fix it
here is an attachment screeshots shows what i mean and version installed
as i said old version of idm works fine on wine without this error
os Arch_deepin
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=36490
Bug ID: 36490
Summary: wine all versions on ubuntu 14.04 winbox.exe
aplication view problem
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: juraj(a)mikrocom.sk
Created attachment 48564
--> http://bugs.winehq.org/attachment.cgi?id=48564
problem in view, aplication winbox.exe
Hello, regarding the problem of wine while using winbox.exe version of ubuntu
14.04 and mint 17RC in any version of wine, does not fit font and cursor does
not display all the text and different font size changes, example screenshots
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=52811
Bug ID: 52811
Summary: Apps starting with wrong non-client area decoration
Product: Wine
Version: 7.6
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: user32
Assignee: wine-bugs(a)winehq.org
Reporter: leandrohr(a)riseup.net
Distribution: ---
Created attachment 72186
--> https://bugs.winehq.org/attachment.cgi?id=72186
Small client to reproduce the bug
Arch Linux
wine-6.0-rc1-11894-gafd7b319e56
---
# Bug description
During the development of the Wine Wayland driver we've noticed a bug that also
affects the X11 driver when using client-side decorations.
Some applications start with the wrong decoration. It's a visual-only issue, as
the application starts with focus and works nicely. But its non-client area
starts with the decoration of inactive applications (greyed out).
This is how it should start:
https://share.collabora.com/index.php/s/tZQxBEaybgwGgpi
But this is how it looks like:
https://share.collabora.com/index.php/s/bQbASjTXg8oxg3W
---
# How to reproduce
You can easily reproduce this by running notepad with the X11 driver option
"Decorated" set to "N". I wrote some small clients to debug this, and the
simple program attached reproduces the issue. TLDR: it is a program that
activates a window of a non-foreground thread and then tries to show it.
---
# What I think is going on
When we call SetActiveWindow(hwnd), hwnd does not become the foreground window,
as the application thread is not the foreground thread yet (at this point the
desktop window is the foreground window). SetActiveWindow() activates the
non-client area only if the window is the foreground window, so we have
activated the window but didn't activate its non-client area (which is correct
AFAIU).
Next we call ShowWindow(hwnd), and now the thread that owns hwnd should become
foreground and SetActiveWindow(hwnd) is called. But as hwnd is already active
it does nothing and returns, so the non-client area is draw as inactive.
---
# Possible fix
In order to fix this, we could change SetActiveWindow() behavior to the
following:
if (hwnd == current active window)
if (hwnd == NtUserGetForegroundWindow() && non-client area of hwnd not
active)
activate non-client area of hwnd
bail out
I wrote a test for this, and I could see that this fix didn't break any other
tests. I've decided to post here in order to know if the fix seems reasonable
to you.
Also, I had a question while debugging this and still couldn't figure out. I
thought that focus was a global property related to the foreground window. But
it seems that when a window is set to active the function to change the focus
to it may also be called (even when the window does not belong to the
foreground thread). So can a non-foreground window be active and have the
focus?
---
Thanks a lot!
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58158
Bug ID: 58158
Summary: Regression: Sacred Gold 2.28 ASE crashes when
initialising multiplayer
Product: Wine
Version: 7.3
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: zergling.man42(a)gmail.com
Distribution: ---
Created attachment 78442
--> http://bugs.winehq.org/attachment.cgi?id=78442
git diff 3aa18cc5d01028bda126624ba5f5bfb11ebc4f77
8714eb2fef7182a9c73b9963493935decca89fdc
Can be triggered by running Sacred.exe and navigating multiplayer -> any of the
three options (local network, closed internet, open internet), or by running
GameServer.exe.
Causes an unhandled page fault on read access, probably in tincat2.dll.
After two bisects, I believe it's caused by
3aa18cc5d01028bda126624ba5f5bfb11ebc4f77, but reverting it doesn't fix it.
It's definitely somewhere between 7.2 and 7.3.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=56431
Bug ID: 56431
Summary: Dotnet TreeView disappearing plus-sign
Product: Wine
Version: 9.3
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: Wagner.a18(a)yahoo.com
Distribution: ---
I try to get a dotnet application, which has a treeview element on board,
running.
If I expand a tree node to display the next level of child tree nodes with a
press on the plus-sign and collapse
the child tree node level with the minus-sign after that. The plus-sign
disappears and I am not able to expand the tree node again.
I have to restart the whole application to be able to expand the tree node
again.
I installed this packages
- WINEPREFIX=~/.wine-32 winetricks vcrun2005 vcrun2008 vcrun2010 vcrun2012
vcrun2013 vcrun2015
- WINEPREFIX=~/.wine-32 winetricks msxml3
- WINEPREFIX=~/.wine-32 winetricks msxml4
- WINEPREFIX=~/.wine-32 winetricks msxml6
- WINEPREFIX=~/.wine-32 winetricks mdac28
- WINEPREFIX=~/.wine-32 winetricks jet40
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40994
Bug ID: 40994
Summary: Exits only from pull-down menu, then reports error.
Product: Wine
Version: 1.9.14
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: leslarkin(a)aim.com
Distribution: ---
Created attachment 55155
--> https://bugs.winehq.org/attachment.cgi?id=55155
Program error dump after program exit
I can't exit by clicking on the 'x' in the red circle in the upper left corner
of the app window. I also can't exit by right-clicking on the Wine icon in my
Launcher bar, and clicking 'Quit'. The only way to exit is by clicking the
app's 'Settings' pull-down menu, then clicking 'Exit'.
After an apparently successful exit, I get an error window with the attached
bactrace.txt file.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=14738
Summary: Sacred Underworld crashes when opening a lan game
Product: Wine
Version: CVS/GIT
Platform: PC-x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: kgbricola(a)web.de
Created an attachment (id=15232)
--> (http://bugs.winehq.org/attachment.cgi?id=15232)
Sacred Underworld crash output when opening a lan game
Sacred Underworld crashes when clicking "Multiplayer" -> "Local Network". The
game version is 2.28.
System:
- Fedora 9 x86_64 (2.6.25.11-97.fc9.x86_64)
- NVIDIA Geforce 8800GTS, proprietary driver 173.14.09
- Firewall disabled
The game runs fine in single player mode. There is a demo version available but
I think it doesn't have the multiplayer part.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58157
Bug ID: 58157
Summary: Lollipop Chainsaw dont use all virtual desktop area
(1024x768)
Product: Wine
Version: 10.6
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: win32u
Assignee: wine-bugs(a)winehq.org
Reporter: mrdeathjr28(a)yahoo.es
Distribution: ---
Lollipop Chainsaw dont use all virtual desktop area (1024x768 in my case)
In wine 10.0 and before work correctly using all virtual desktop area but in
lastest wine dont use all area like wine 10.0
I leave some screenshots showing this problem
Seeking some commits i think could have a relation with this commits:
https://gitlab.winehq.org/wine/wine/-/merge_requests/7354https://gitlab.winehq.org/wine/wine/-/merge_requests/6947
Thanks
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=57925
Bug ID: 57925
Summary: winewayland.drv: Games are not filled to my monitor's
resolution
Product: Wine
Version: 10.2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: winewayland
Assignee: wine-bugs(a)winehq.org
Reporter: daniel.penalized(a)proton.me
Distribution: ArchLinux
Created attachment 78178
--> https://bugs.winehq.org/attachment.cgi?id=78178
SWAT 4 output log (in this log I opened the settings and tried to set the
maximum resolution that the game supports)
Old games (specifically Ghost Recon, Splinter Cell 1, Splinter Cell 2 and SWAT
4) won't fill to my monitor's resolution, even if I switch to a higher
resolution in the game settings.
This MR (https://gitlab.winehq.org/wine/wine/-/merge_requests/6804) was
supposed to work with winewayland.drv and fix this issue, but it doesn't work
or fix it. However, this MR
(https://gitlab.winehq.org/wine/wine/-/merge_requests/5057) does work and fixes
that issue.
There is a workaround (at least for SWAT 4): which is to take the game window
out of fullscreen, then toggle the maximization state of the game window and
put the game window back into fullscreen (In labwc/openbox terms:
ToggleFullscreen > ToggleMaximize > ToggleFullscreen). I think it also works
for Ghost Recon.
Splinter Cell 1 even supports 16:9 resolutions, but only in game (in the menus,
loadings and cut-scenes are still not filled in for my monitor's resolution)
and Splinter Cell 2 is worse, there's no support for 16:9 resolutions or even a
workaround.
- I use labwc/wlroots as WM.
- I'm using the new WoW64 mode. I did some tests with normal wine, but it's
been a few weeks or months, so I'm not sure if the new WoW64 mode has any
impact here, but I don't think so.
(Sorry if the paraphrases seem disconnected from each other, if I'm not very
clear or if I'm giving too little information. I've been doing a lot of testing
over the last few hours and my mind isn't in a good place to come up with a
good text here :/)
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32279
Bug #: 32279
Summary: Treeview control in IsoBuster keeps resetting itself
Product: Wine
Version: 1.5.18
Platform: x86-64
URL: http://www.isobuster.com/download.php
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: markk(a)clara.co.uk
Classification: Unclassified
This bug shows up with IsoBuster 3.0.
Download and run the IsoBuster installer. Run IsoBuster. Choose File->Open
Image File and load an ISO image (or I guess you could select the disc in the
DVD drive). Try to choose an image file which contains quite a few directories,
subdirectories and files.
Use the treeview on the left side to browse the directory hierarchy. If you
click on various entries, notice that after a few clicks the treeview is reset
to the all-collapsed state. That happens with both built-in and native
comctl32. There's no console output when the treeview resets.
(There's also an access violation dialog on quitting the program, but that's
probably not related.)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58095
Bug ID: 58095
Summary: err:edit:EDIT_UnlockBuffer es->text == 0 ... please
report
Product: Wine
Version: 10.5
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: comctl32
Assignee: wine-bugs(a)winehq.org
Reporter: kyle.kcsoftwares(a)gmail.com
Distribution: ---
Using ReactOS notepad.exe to edit ReactOS explorer.exe
Ubuntu / Wine 10.5 shows
err:edit:EDIT_UnlockBuffer es->text == 0 ... please report
Also shows in ReactOS (using an older Wine comctl32)
https://jira.reactos.org/browse/CORE-18944
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58138
Bug ID: 58138
Summary: Page fault Unable to access file
'/usr/src/packages/BUILD/dlls/kernelbase/locale.c'
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: w9uwm(a)icloud.com
Distribution: ---
Created attachment 78419
--> http://bugs.winehq.org/attachment.cgi?id=78419
Backtrace of error
Error received using RT Systems Version 5 software. Seems to load fine, then
the error above appears on startup.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58115
Bug ID: 58115
Summary: KIOXIA SSD Utility
Product: Wine
Version: 10.5
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: blocker
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: jveikanm(a)nic.fi
Distribution: ---
This crashes almost immediately so it's totally unusable.
https://europe.kioxia.com/en-europe/personal/software/ssd-utility.html
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58149
Bug ID: 58149
Summary: HWiNFO 8.24: mouse-hover tooltips disappear almost
instantly
Product: Wine
Version: 10.6
Hardware: x86-64
OS: MacOS
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: cemer99797(a)isorax.com
In the settings window of HWiNFO 8.24, the hover tooltips that give more info
about the option on mouse-over disappear almost instantly.
Steps to reproduce:
launch HWiNFO64.exe, in the intro window click on Settings, hover the mouse
over a setting (tooltip works correctly and doesn't disappear at first), then
hover the mouse over another setting. Now the tooltip will always disappear
almost intantly
download link:
https://sourceforge.net/projects/hwinfo/files/Windows_Portable/hwi_824.zip/…
sha256: 74c71b6a8a3498f5a5254b4e692345c45ec5cf88246bf3516cd7c35faf516ca4
I'm using Gcenx's wine-devel 10.6 build
(https://github.com/Gcenx/macOS_Wine_builds/releases/tag/10.6) on macOS 11
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=58027
Bug ID: 58027
Summary: trivial use of Win32 GNU make failes with Wine 10.x
but not with Wine 9.0
Product: Wine
Version: 10.4
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: dl.soluz(a)gmx.net
Distribution: ---
Created attachment 78286
--> https://bugs.winehq.org/attachment.cgi?id=78286
contains the specific make.exe (with MD5, and source-infos)+makefile and
scenarios
its a super simple makefile that does nothing more then
clean:
del *.not_existing_at_all
and make fails to run the del command on 10.x Wine versions but works on Wine
9.0
i created a git-repo with the make.exe (with MD5) a makefile and a clear
description whats happening - in short Wine 10.x breaks someway the del command
run
the repo: https://github.com/LowLevelMahn/bug_repo0
(i also attached the 3 files of the repo as zip)
i don't know if that is a real Wine bug but its strange that is does not happen
with a older Wine version (tested only 9.0 so far)
tested with
up-to-date Ubuntu 24.10 (up-to-date) + sudo apt install wine32 => wine 9.0
up-to-date WSL2/SUSE Tumbleweed + sudo zypper install wine => wine 10.0
up-to-date Fedora 42 (Beta) + sudo dnf install wine32 => wine 10.4
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=57848
Bug ID: 57848
Summary: Wrong alignment of GUI elements
Product: Wine
Version: 10.0
Hardware: arm
OS: MacOS
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: rmkk(a)atlas.cz
Created attachment 78067
--> https://bugs.winehq.org/attachment.cgi?id=78067
9.17 (on the top) vs 10.0 (bellow)
Hello, I've decided to try a new version of wine
(wine-staging-10.0-osx64.tar.xz) with my existing WINEPREFIX and specifically
with Sparx Enterprise Architect tool. There is an issue with displaying
diagrams, it seems that text is aligned differently (in a wrong way) to my
current version of wine (wine-staging-9.17). Please see images in attachment.
Thanks for help !!!
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45585
Bug ID: 45585
Summary: canot run mobrise 4.8
Product: Wine
Version: 3.0.2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: wildanrgz(a)gmail.com
Distribution: ---
Created attachment 62006
--> https://bugs.winehq.org/attachment.cgi?id=62006
i dont know the error im just want to report
aplication hang and canot exit the aplication blank too
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=18562
Summary: foxtrader crash with page fault (regression)
Product: Wine
Version: 1.1.21
Platform: PC
OS/Version: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: xrfang(a)gmail.com
Created an attachment (id=21225)
--> (http://bugs.winehq.org/attachment.cgi?id=21225)
log messages
FoxTrader (http://wizard.stock.hexun.com/webtornado/download/SetupGold.exe)
crashes with page fault, please see log.
Note
1. This is a regression
2. The program is Chinese, and it needs MFC42.DLL.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58129
Bug ID: 58129
Summary: shlwapi::PathCombineW does not manage path starting
with dots
Product: Wine
Version: 10.5
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: shlwapi
Assignee: wine-bugs(a)winehq.org
Reporter: kyle.kcsoftwares(a)gmail.com
Distribution: ---
Created attachment 78395
--> http://bugs.winehq.org/attachment.cgi?id=78395
sample app
Inspired by https://bugs.winehq.org/show_bug.cgi?id=4309 and
https://jira.reactos.org/browse/CORE-20129
Use this simple NSI script :
Section
System::Call 'shlwapi::PathCombineW(w.r1,w "C:\", w "...xx")'
MessageBox MB_OK $1
SectionEnd
Shows "C:.xx" in Wine while it shows "C:\...xx" in Windows
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58124
Bug ID: 58124
Summary: Unspecified Wine version on x86-64 hardware in Debian
12.10
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: ily.djjjj(a)gmail.com
Distribution: ---
Created attachment 78386
--> http://bugs.winehq.org/attachment.cgi?id=78386
Avast One crash bug report
Avast One(AvastUI.exe) crashed during run attempt; Wine debugger suggested
submitting a bug report(attached below).
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58114
Bug ID: 58114
Summary: Opera 36 Installer - Terms & Conditions hyperlink is
missing
Product: Wine
Version: 10.5
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: kyle.kcsoftwares(a)gmail.com
Distribution: ---
Created attachment 78370
--> http://bugs.winehq.org/attachment.cgi?id=78370
Win11_OK
Opera 36 Installer
https://download.opera.com/download/get/?partner=www&opsys=Windows&product=…
Installer misses T&C hyper link
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58112
Bug ID: 58112
Summary: Unimplemented function
KERNEL32.dll.InitializeSynchronizationBarrier
Product: Wine
Version: 10.5
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: kernel32
Assignee: wine-bugs(a)winehq.org
Reporter: git.ceeac(a)gmail.com
Distribution: ---
I am developing a cross-platform application that uses barriers as a
synchronization primitive.
This works fine when the application is started on Windows, however when
started on Linux (Arch) + WINE (10.5), the application crashes with
wine: Unimplemented function KERNEL32.dll.InitializeSynchronizationBarrier
called at address 00006FFFFFC695E8 (thread 012c)
Presumably, all of the following functions are unimplemented in WINE:
- InitializeSynchronizationBarrier
- DeleteSynchronizationBarrier
- EnterSynchronizationBarrier
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58153
Bug ID: 58153
Summary: Error capturing phone screen in apowermirror
Product: Wine
Version: 10.6
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: mscoree
Assignee: wine-bugs(a)winehq.org
Reporter: grandrodri3(a)gmail.com
Distribution: ---
Created attachment 78435
--> http://bugs.winehq.org/attachment.cgi?id=78435
apowermirror error
Hello, how are you?
Well, let me briefly explain the error. I was trying out apowermirror, an app
for viewing your phone's screen on your PC. The USB part isn't working for
reasons you may know (I tried it, and it doesn't detect the phone in debug
mode. I know Wine doesn't load drivers, but I wanted to test everything). But
what I wanted to test, which was the Wi-Fi part, was installing the app on the
phone, connecting it, and the phone screen went blank, not playing what's
coming out.
I sent the txt file with the log that appears to me regarding the error that
keeps popping up.
I'm including the official website for this program:
https://www.apowersoft.es/phone-mirror
Could you please check it?
Regards
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58148
Bug ID: 58148
Summary: Wine-staging 10.6-1 again without internet connection
Product: Wine-staging
Version: 10.6
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: kvradio(a)seznam.cz
CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com
Distribution: ---
In Wine 10.6-1 and also in Wine-staging 10.6-1 (CachyOS) the internet
connection in the application (Swisslog in a dx or LOTW cluster) is again
without internet connection stopped working. In Wine 10.5 -3 everything is
fine.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=57838
Bug ID: 57838
Summary: it just wont load the app
Product: Wine
Version: unspecified
Hardware: aarch64
OS: MacOS
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: sifato6092(a)owlny.com
Created attachment 78053
--> https://bugs.winehq.org/attachment.cgi?id=78053
backtrace
it just wont load the app i useing
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=44344
Bug ID: 44344
Summary: A serious bug with the program sparkchess
Product: Wine
Version: 2.21
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: sander.lagas(a)ziggo.nl
Distribution: ---
The game was installed and then it said there is a serious problem
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58152
Bug ID: 58152
Summary: MusicBee and KDE Plasma: Tooltip focus issues - loses
focus on mouseover, tooltip sometimes shows wrong
target
Product: Wine-staging
Version: 10.4
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: v_winebugs(a)outlook.com
CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com
Distribution: ---
Seems like WINE in general has issues with tooltip focus but I didn't want to
hijack other similar issues.
MusicBee running on Bazzite 42, WINE 10.4 layered on top, KDE Plasma 6.3.4.
When mousing over on items in MusicBee, the tooltip seems to have pretty
unpredictable behaviour from it being classed as its own window. The seekbar
when set to the Wave Bar will cause focus to be lost from MusicBee, and
sometimes the tooltip is just a black rectangle instead of the timestamp.
Mousing over song names can also sometimes show the wrong song name as well.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=48006
Bug ID: 48006
Summary: Final Fantasy XIV Launcher stuck on splash screen
Product: Wine
Version: 4.18
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ieframe
Assignee: wine-bugs(a)winehq.org
Reporter: winehq.eloelo(a)spamgourmet.com
Distribution: ---
Created attachment 65534
--> https://bugs.winehq.org/attachment.cgi?id=65534
wine output
The FFXIV launcher has been updated and is now frozen on the splash screen.
(Just a big "Final Fantasy XIV Online" logo).
For now there is a workaround: Set Browser to 1 in FFXIV_BOOT.CFG.
This browser type isn't supposed to last forever, so this is just a temporary
workaround.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58151
Bug ID: 58151
Summary: MusicBee: fonts for certain Unicode symbols not being
redirected
Product: Wine-staging
Version: 10.4
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: v_winebugs(a)outlook.com
CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com
Distribution: ---
Created attachment 78432
--> http://bugs.winehq.org/attachment.cgi?id=78432
MusicBee font redirection bug screenshots
Font redirection for CJK scripts seems to be working reliably since 10.x, which
is great. But I don't think the font redirection bug is 100% dealt with yet.
I've come across two artists that seem to test the limits of WINE's
Unicode/font handling: ???????????? ???????????????????????? ("SKY SPORTS"
written in bold mathematical lettering, different from regular Latin letters)
and ⣎⡇ꉺლ༽இ•̛)ྀ◞ ༎ຶ ༽ৣৢ؞ৢ؞ؖ ꉺლ - ...yeah, don't ask. This is an alias for Four Tet, so
I'll refer to this as "Four Tet's alias" from here on out.
These artists' gimmick seem to be messing about Unicode symbols - for SKY
SPORTS' case it's using bold mathematical lettering to give the illusion of
bold text, for the case of Four Tet's alias, it's using whatever symbols they
can find to make Unicode gibberish. I'll link their entries on MusicBrainz if
you want to have a further look:
SKY SPORTS: https://musicbrainz.org/artist/1cc8899d-3d78-49ac-b3dd-64ec7a15259d
Four Tet alias:
https://musicbrainz.org/artist/2d9745dd-5dc6-4145-9453-fec582cfa9b8
No matter what font, these artists' names and releases do not show up on
MusicBee, they show up as boxes. This is not reproducible on Windows. In the
past, changing to Tahoma would show CJK letters somewhere or other except when
it's bold. In this case, Tahoma does nothing to fix this. Unifont is installed
(through winetricks allfonts) and that does display the symbols in Four Tet's
alias, so this is likely a bug with font redirection again.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=32968
Bug #: 32968
Summary: Sengoku Rance unbearable slow
Product: Wine
Version: unspecified
Platform: x86-64
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: maxmusterm(a)gmail.com
Classification: Unclassified
When trying to play Sengoku Rance with the latest patches (english patched
version) everything is extremly slow.
Sengoku Rance uses the Alisesoft System4.0 Ver1.3 engine.
I installed it with a clean wine prefix,googled like hell for help and tested
it on two laptops each with the newest wine version on Arch:
1.6ghz dual core with ati hd 6320 (with the ati driver from git)
2.5 ghz dual core with geforce 9300gs (with nouveau from git)
This is an old game using directx 6.
Running the game itself from the console gives no output whatsoever.
And everything after and including the main menu runs at roughly a third of the
speed.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=52380
Bug ID: 52380
Summary: Logos 9 Bible Software (.NET 4.7 app) menus glitching,
flickering and not showing regression
Product: Wine
Version: 7.0-rc5
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: johnpgoodman(a)gmail.com
Distribution: ---
Created attachment 71593
--> https://bugs.winehq.org/attachment.cgi?id=71593
Video showing menu glitch regression.
Menu Items docs guides tools and layout work on first click and then flash
there after. This is a regression which only appears in 7.0rc5-staging. devel
doesn't have this bug. Please see the video for demonstration.
N.b. this is not the same as bug 51984 which was resolved.
Help is much appreciated! Below is the installation guide.
The app is a bit like kindle in so much as the engine is free but the resources
cost so there is a free download. Unlike kindle it has many advanced research
features and books link together etc. The main app is free but there are paid
features, resources and subscriptions. To use the app you need a free account
https://www.logos.com/product/194909/logos-9-basic. It uses a downloader app
which last I tried doesn't work with wine. The actual msi link is
https://downloads.logoscdn.com/LBS9/Installer/9.6.0.0024/Logos-x64.msi
Manual Install Procedure:
1 Install wine 6 or newer
2 winetricks corefonts
3 winetricks settings fontsmooth=rgb
4 winetricks dotnet48
5 winetricks settings renderer=gdi (you might need to set the reg key
manually)
6 Install the Logos.msi download but don't run it.
7 wine64 reg add "HKCU\\Software\\Wine\\AppDefaults\\LogosIndexer.exe" /v
Version /t REG_SZ /d vista /f
8 Run Logos and sign in with your free account.
There is a script which downloads a preconfigured wine bottle and sets it all
up in $USER/Logos_BibleP directory which you can then easily remove etc.
https://github.com/ferion11/LogosLinuxInstaller/releases Choose fast install
without wine AppImage.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=49482
Bug ID: 49482
Summary: unhandled exception: page fault on read access to
0x00000018
Product: Wine
Version: 5.11
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: noel.kuntze+bugs.winehq(a)thermi.consulting
Distribution: ---
Created attachment 67596
--> https://bugs.winehq.org/attachment.cgi?id=67596
backtrace.exe from wine crash window
Caused by autoconf conftest.exe
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=35057
Bug #: 35057
Summary: Corel Paint Shop Pro X trial fails to install
Product: Wine
Version: 1.7.7
Platform: x86
OS/Version: Linux
Status: NEW
Keywords: download, Installer
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: austinenglish(a)gmail.com
Blocks: 22959
Classification: Unclassified
Created attachment 46749
--> http://bugs.winehq.org/attachment.cgi?id=46749
terminal output/backtrace
I noticed this while looking at bug (22959). There are a couple other bugs for
other versions of this program, but I'm not clear which version this is (X
isn't very clear), and the installer names are different, so filing a clean
bug. The others, for reference, are bug 27240 and bug 34377.
Installer used:
http://www.freedownloads.be/downloaddetail/1763-Corel-Paint-Shop-Pro-X
austin@aw25 ~ $ sha1sum Corel_PaintShopPro1000_EN_TBYB_TrialESD.exe
f9685288f5c9d922f51c0f39194bf71d3935bb4c
Corel_PaintShopPro1000_EN_TBYB_TrialESD.exe
austin@aw25 ~ $ du -h Corel_PaintShopPro1000_EN_TBYB_TrialESD.exe
106M Corel_PaintShopPro1000_EN_TBYB_TrialESD.exe
austin@aw25 ~ $ wine --version
wine-1.7.7-199-g608b1e1
fails pretty early, with a dialog saying it failed prematurely. There's also an
msi crash:
err:msi:ITERATE_Actions Execution halted, action L"PCU_Callit" returned 1603
...
=>0 0x7ed36636 msi_destroy_assembly_caches+0x26(package=0x148e88)
[/home/austin/wine-git/dlls/msi/../../include/fusion.h:250] in msi (0x0033fbc8)
1 0x7ed7c84f MSI_FreePackage+0x1e(arg=0x148e88)
[/home/austin/wine-git/dlls/msi/package.c:351] in msi (0x0033fc18)
2 0x7ed60ca7 msiobj_release+0x66(info=0x148e88)
[/home/austin/wine-git/dlls/msi/handle.c:259] in msi (0x0033fc58)
3 0x7ed6c371 MsiInstallProductW+0xe0(szPackagePath=<is not available>,
szCommandLine=<is not available>) [/home/austin/wine-git/dlls/msi/msi.c:252] in
msi (0x0033fca8)
4 0x7ee12e4f WinMain+0x79e(hInstance=<is not available>, hPrevInstance=<is
not available>, lpCmdLine=<is not available>, nCmdShow=<is not available>)
[/home/austin/wine-git/programs/msiexec/msiexec.c:983] in msiexec (0x0033fd88)
5 0x7ee11a64 main+0xb3(argc=<couldn't compute location>, argv=<couldn't
compute location>) [/home/austin/wine-git/dlls/winecrt0/exe_main.c:49] in
msiexec (0x0033fe18)
6 0x7ee14a10 __wine_spec_exe_entry+0x7f(peb=<couldn't compute location>)
[/home/austin/wine-git/dlls/winecrt0/exe_entry.c:36] in msiexec (0x0033fe58)
7 0x7b8601cc call_process_entry+0xb() in kernel32 (0x0033fe78)
8 0x7b8611e3 start_process+0x62(peb=<couldn't compute location>)
[/home/austin/wine-git/dlls/kernel32/process.c:1097] in kernel32 (0x0033feb8)
9 0x7bc807e0 call_thread_func_wrapper+0xb() in ntdll (0x0033fed8)
10 0x7bc8378d call_thread_func+0x7c(entry=0x7b861180, arg=0x7ffdf000,
frame=0x33ffc8) [/home/austin/wine-git/dlls/ntdll/signal_i386.c:2602] in ntdll
(0x0033ffa8)
11 0x7bc807be call_thread_entry_point+0x11() in ntdll (0x0033ffc8)
12 0x7bc5576e start_process+0x1d(kernel_start=0x7b861180)
[/home/austin/wine-git/dlls/ntdll/loader.c:2762] in ntdll (0x0033ffe8)
13 0xf75cab2d wine_call_on_stack+0x1c() in libwine.so.1 (0x00000000)
14 0xf75cabeb wine_switch_to_stack+0x2a(func=0x7bc55750, arg=0x7b861180,
stack=0x340000) [/home/austin/wine-git/libs/wine/port.c:59] in libwine.so.1
(0xffde17d8)
I'll attach logs
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=48149
Bug ID: 48149
Summary: Paintshop Pro X2 does not install
Product: Wine
Version: 4.20
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: bignintyfan(a)gmail.com
Distribution: ---
Created attachment 65764
--> https://bugs.winehq.org/attachment.cgi?id=65764
Paintshop Pro X2 Log
While trying to test 16978, I found that the installer for Paint Shop Pro X2
stops at the "Preparing the InstallShield Wizard" step in Wine 4.20.
To download to test use this link:
https://web.archive.org/web/2015*/http://download.oldapps.com/Paint_Shop_Pr…
See the attached log for details
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58092
Bug ID: 58092
Summary: Wine on aarch64 fails to run Windows ARM applications:
missing ntdll.dll in WOW64 mode
Product: Wine
Version: 9.0
Hardware: aarch64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: rikul(a)inbox.ru
Distribution: ---
I'm experimenting with running Wine on an ARM64 (aarch64) Linux system and I’ve
run into issues trying to execute Windows applications compiled for Windows on
ARM.
I compiled Wine for aarch64 from source, and some built-in tools like Notepad
work fine. However, when trying to run Windows ARM apps like Google Chrome or
Firefox (ARM versions), I encounter errors and the applications fail to launch.
For example, running the Chrome ARM setup (ChromeStandaloneSetup.exe) results
in the following output:
wine ChromeStandaloneSetup.exe
0050:err:vulkan:vulkan_init_once Wine was built without Vulkan support.
00c4:err:ntoskrnl:ZwLoadDriver failed to create driver
L"\\Registry\\Machine\\System\\CurrentControlSet\\Services\\winebth": c00000e5
003c:fixme:service:scmdatabase_autostart_services Auto-start service L"winebth"
failed to start: 1359
0024:err:environ:init_peb starting
L"Z:\\root\\Downloads\\ChromeStandaloneSetup.exe" in experimental wow64 mode
wine: failed to load L"\\??\\C:\\windows\\syswow64\\ntdll.dll" error c0000135
The key issue seems to be:
wine: failed to load L"\\??\\C:\\windows\\syswow64\\ntdll.dll" error c0000135
From what I understand, this suggests a missing or misconfigured WOW64
environment. I would appreciate any guidance on whether this functionality is
expected to work yet, or if additional configuration or patches are required.
System details:
Architecture: aarch64
Wine version: wine-10.4-203-ge956c4ec71d
Distro: Rocky Linux 8.10 (Green Obsidian)
Any pointers on how to get Windows ARM applications working under Wine on
ARM64, or whether this is still in development, would be greatly appreciated.
If you need any more logs or build configuration info, I'm happy to provide
them.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58147
Bug ID: 58147
Summary: Texts not shown in RTL session
Product: Wine
Version: 10.4
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: usp10
Assignee: wine-bugs(a)winehq.org
Reporter: moceap(a)hotmail.com
Distribution: ---
Created attachment 78430
--> http://bugs.winehq.org/attachment.cgi?id=78430
Example of the bug
Both RTL and LTR texts not shown correctly in RTL session, in fresh wine
releases. (Was worked before.)
The error message is:
0168:fixme:uniscribe:GSUB_apply_ContextSubst Unhandled Context Substitution
Format 3
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=51139
Bug ID: 51139
Summary: Application T@X 2021 freezes when trying to transmit
data to Elster (German Tax Application)
Product: Wine
Version: 6.8
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: dieter.jurzitza(a)harman.com
Distribution: ---
T@X20XX can be used with wine since years. This year it apparently worked as
usual, with one frustrating exception: when trying to transfer the entire
documetation to the finance office at the end the application freezes and does
noting any more.
Unfortunately no error shows in the logs when starting wine with a
corresponding debug option (WINEDEBUG=+relay, I hope this is ok ...). I have 32
GByte of logging code what is meaningless to upload - but no "real" error
message inside.
"top" shows 100% CPU - load by the wine process stman.exe. Messages show like:
01b8:Call ntdll.RtlAllocateHeap(00220000,00000000,00000024) ret=089a10d6
01b8:Ret ntdll.RtlAllocateHeap() retval=3ec3bbe0 ret=089a10d6
01b8:Call ntdll.RtlAllocateHeap(00220000,00000000,00000024) ret=089a10d6
01b8:Ret ntdll.RtlAllocateHeap() retval=2f24da98 ret=089a10d6
01b8:Call KERNEL32.HeapFree(00220000,00000000,2f24da98) ret=0899e7eb
01b8:Ret KERNEL32.HeapFree() retval=00000001 ret=0899e7eb
01b8:Call KERNEL32.HeapFree(00220000,00000000,3ec3bbe0) ret=0899e7eb
01b8:Ret KERNEL32.HeapFree() retval=00000001 ret=0899e7eb
in fast sequence and this:
01b8:Call ntdll.RtlAllocateHeap(00220000,00000000,00000014) ret=6be509ba
01b8:Ret ntdll.RtlAllocateHeap() retval=31991020 ret=6be509ba
0238:Call ntdll._strnicmp(17f9c7cc "Inter-| Receive
| Transmit\n",17f9ca0c "eth1",00000004) ret=7eceaa21
01b8:Call ntdll.RtlAllocateHeap(00220000,00000008,00000014) ret=6be7960b
0238:Ret ntdll._strnicmp() retval=00000001 ret=7eceaa21
01b8:Ret ntdll.RtlAllocateHeap() retval=31983590 ret=6be7960b
0238:Call ntdll._strnicmp(17f9c7cd "face |bytes packets errs drop fifo frame
compressed multicast|bytes packets errs drop fifo colls carrier
compressed\n",17f9ca0c "eth1",00000004) ret=7eceaa21
01b8:Call ntdll.RtlAllocateHeap(00220000,00000000,00000020) ret=6be798c1
0238:Ret ntdll._strnicmp() retval=00000001 ret=7eceaa21
01b8:Ret ntdll.RtlAllocateHeap() retval=31992478 ret=6be798c1
0238:Call ntdll._strnicmp(17f9c7d0 "lo: 376975 3786 0 0 0 0
0 0 376975 3786 0 0 0 0 0
0\n",17f9ca0c "eth1",00000004) ret=7eceaa21
0238:Ret ntdll._strnicmp() retval=00000001 ret=7eceaa21
01b8:Call ntdll.RtlAllocateHeap(00220000,00000000,0000000c) ret=6be7974e
0238:Call ntdll._strnicmp(17f9c7ce "eth1: 727671935 574392 0 0 0
0 0 2870 31275660 279019 0 0 0 0 0
0\n",17f9ca0c "eth1",00000004) ret=7eceaa21
01b8:Ret ntdll.RtlAllocateHeap() retval=31991978 ret=6be7974e
0238:Ret ntdll._strnicmp() retval=00000000 ret=7eceaa21
cycling through eth0, eth1, wlan0 etc ...
Finally I see once this at the begin (when the trouble starts ...):
01b8:Ret ntdll.RtlAllocateHeap() retval=3ecc7cc8 ret=089a10d6
01b8:Call KERNEL32.OutputDebugStringW(3ecc7cd8 L"void __thiscall
BTS::FormViewerPage::enablePrevNext(void) -1 21\n") ret=67020427
01b8:Call ntdll.RtlInitUnicodeString(0021d000,3ecc7cd8 L"void __thiscall
BTS::FormViewerPage::enablePrevNext(void) -1 21\n") ret=7b0125fa
01b8:Ret ntdll.RtlInitUnicodeString() retval=00000082 ret=7b0125fa
with the "void __thiscall entries - but no clue on my behalf. Any support is
very much appreciated, most specifically what could I do and how could I better
debug the process without flooding my harddisk with trillions (ok, maybe less
:-)) of messages.
Thank you very much,
take care
Dieter Jurzitza
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58143
Bug ID: 58143
Summary: Variable refresh rate does not work properly with
winewayland.
Product: Wine
Version: 10.6
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: winewayland
Assignee: wine-bugs(a)winehq.org
Reporter: jogamer1(a)protonmail.com
Distribution: ---
When using Wine's wayland backend, variable refresh rate is not working
properly according to the monitor's built in refresh rate counter. It works
fine on xwayland.
Steps to reproduce:
1. Have a monitor and GPU that supports VRR
2. Set up a framerate limiter such as Mangohud, cap the game to a framerate
within the monitor's VRR range (most 1080p 144hz monitors with
VRR/Freesync/G-Sync have a range of 144hz to 48hz).
3. Launch a game in native wayland mode with 'MANGOHUD=1 DISPLAY= wine
game.exe' (assuming dxvk is set up and your GPU supports Vulkan), make sure the
game is in fullscreen.
4. Cap the game's framerate, if your monitor has a refresh rate on-screen
display watch it spike from the framerate you capped it at to the monitor's max
refresh rate.
5. Test it again with xwayland wine in fullscreen 'MANGOHUD=1 wine game.exe',
cap the framerate and actiavte the monitor's refresh rate on-screen display. It
will stay at/around the game's capped framerate.
Using KWin Wayland 6.3.4, Kernel 6.14 Mesa 25.0.3, AMDGPU RX 6000 graphics with
a 144hz monitor connected via Display Port. Most Unity engine games launch fine
in wayland mode for games to test.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47240
Bug ID: 47240
Summary: Sketchup 2018 web dialogs not displaying (Dynamic
components attributes)
Product: Wine
Version: 4.8
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: ieframe
Assignee: wine-bugs(a)winehq.org
Reporter: BEAULIEU.Florian(a)hotmail.fr
Distribution: ---
Created attachment 64524
--> https://bugs.winehq.org/attachment.cgi?id=64524
Console output Dynamic Components Attributes window.
Hello,
The dynamic components attributes window is not displaying correctly (white
window).
Tried with wine-staging 4.8,
winetricks comdlg32ocx dotnet472 gdiplus gdiplus_winxp msls31 msxml6 vcrun2013
vcrun2017 xmllite corefonts
Nvidia proprietary drivers version 418.56
Env vars : __GL_MaxFramesAllowed=1
Sincerely,
FloBEAUG
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=48644
Bug ID: 48644
Summary: Kodak EasyShare installer doesn't populate list of
countries
Product: Wine
Version: 5.2
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: oleg.kuznetsov(a)metamint.ru
Distribution: ---
Created attachment 66502
--> https://bugs.winehq.org/attachment.cgi?id=66502
Combo box on Vista
While Kodak EasyShare is impossible to download and use (see: bug 17294 comment
25 ), I found one issue with the installer/downloader: it doesn't populate list
of countries on one of the steps.
Steps to reproduce:
1) Start the installer. On Language selection screen, press "Next"
2) On the next screen, accept License Agreement and press "Next"
Expected result:
On the appeared screen, there is should be a combo box "Select your country"
with a list of countries (on Windows Vista it is populated)
Actual result:
The combo box is empty, nothing in the terminal.
wine version:
wine-5.2-203-gb253bd6
sha1sum install_easyshare_8.2.0.exe
d4725af6e42d49b2dfee83a24979ece235d66fd5 install_easyshare_8.2.0.exe
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=57713
Bug ID: 57713
Summary: Tom Clancy's Rainbow Six: Lockdown leads to a black
screen on launch
Product: vkd3d
Version: 1.14
Hardware: x86-64
URL: https://www.moddb.com/games/tom-clancys-rainbow-six-lo
ckdown/downloads/rainbow-six-lockdown-demo
OS: Linux
Status: NEW
Keywords: download
Severity: minor
Priority: P2
Component: hlsl
Assignee: wine-bugs(a)winehq.org
Reporter: andrey.goosev(a)gmail.com
Distribution: ---
Continuation of bug 56855.
0024:err:d3dcompiler:D3DCompile2 c:/program files/ubisoft/red storm
entertainment/rainbow six lockdown
demo/data/shaders/vsdiffusepmsmsemdynlit.hlsl:499:20: W5300: Implicit
truncation of vector type.
0024:err:d3dcompiler:D3DCompile2 c:/program files/ubisoft/red storm
entertainment/rainbow six lockdown
demo/data/shaders/vsdiffusepmsmsemdynlit.hlsl:549:25: W5300: Implicit
truncation of vector type.
0024:err:d3dcompiler:D3DCompile2 c:/program files/ubisoft/red storm
entertainment/rainbow six lockdown
demo/data/shaders/vsdiffusepmsmsemdynlit.hlsl:550:25: W5300: Implicit
truncation of vector type.
0024:err:d3dcompiler:D3DCompile2
...
0024:err:d3dcompiler:D3DCompile2 c:/program files/ubisoft/red storm
entertainment/rainbow six lockdown demo/data/shaders/skinfragments.hlsl:510:20:
W5300: Implicit truncation of vector type.
0024:err:d3dcompiler:D3DCompile2 c:/program files/ubisoft/red storm
entertainment/rainbow six lockdown demo/data/shaders/skinfragments.hlsl:632:6:
W5300: Implicit truncation of vector type.
0024:err:d3dcompiler:D3DCompile2 c:/program files/ubisoft/red storm
entertainment/rainbow six lockdown demo/data/shaders/skinfragments.hlsl:666:22:
W5300: Implicit truncation of vector type.
0024:err:d3dcompiler:D3DCompile2
vkd3d:0024:fixme:fold_cast Cast from float to float4.
vkd3d:0024:fixme:fold_cast Cast from float to float3.
1.14-325-g5bfcd811
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=48744
Bug ID: 48744
Summary: Crash on installation of Dynacadd 98
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: mmcnally(a)mcnally.ca
Distribution: ---
Created attachment 66637
--> https://bugs.winehq.org/attachment.cgi?id=66637
backtrace.txt is the file produced when the installation of Dynacadd 98
stopped. If useful I can supply the Dynacadd 98 program. Plase advise how to do
the supply.
Crash on installation of Dynacadd 98
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=21449
Summary: Scrolling in Delphi 5 quickreport preview doesn't work
Product: Wine
Version: 1.1.36
Platform: x86
URL: http://home.scarlet.be/linux/compteco/pqr.zip
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: vincent.hardy.be(a)gmail.com
Run test program.
It's a proprietary previewer.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47257
Bug ID: 47257
Summary: Icecream PDF Editor shows white screen
Product: Wine
Version: 4.8
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: ahmed.com(a)protonmail.com
Distribution: ---
Created attachment 64543
--> https://bugs.winehq.org/attachment.cgi?id=64543
terminal log
Icecream PDF Editor shows white screen, and I can't minimize the main screen.
One more interesting thing: I can see the main screen correctly in the taskbar
thumbnail! (I will upload a picture in the attachments to show that clearly)
The program uses QT5, and OpenGl.
The program can be downloaded for this link >>>
https://icecreamapps.com/PDF-Editor/
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45744
Bug ID: 45744
Summary: Bug in AirDc++ network config
Product: Wine
Version: 3.14
Hardware: x86
OS: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: activeds
Assignee: wine-bugs(a)winehq.org
Reporter: fsoeltl87(a)gmail.com
Problem in AirDc++ network config.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=47076
Bug ID: 47076
Summary: LoadImage with option LR_SHARED and specified
resolution does loading only that icon resolution,
skipping others
Product: Wine
Version: 4.6
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: nikolaysemenkov(a)gmail.com
Distribution: ---
LoadImage with option LR_SHARED and specified resolution(eg 32x32) does loading
only that icon resolution, skipping others. Next time loading the same resource
with all resolutions(by specifying 0,0) does return only the previously loaded
resolution, skipping others. Putting that icon on a button makes button image
giant due to wrong resolution.
eg:
HICON hIconBig = (HICON)LoadImage(HInstance, MAKEINTRESOURCE(iIconLarge),
IMAGE_ICON, 32, 32, LR_DEFAULTCOLOR | LR_SHARED);
Loads and cache only 32x32 image
LoadImage(LGetHInstance(), MAKEINTRESOURCE(iIconSmall), IMAGE_ICON, 16, 16,
LR_DEFAULTCOLOR | LR_SHARED)
Returns 32x32 from cache instead of 16x16
HICON hIcon2 = (HICON)LoadImage(HInstance, MAKEINTRESOURCE(iIconLarge),
IMAGE_ICON, 0, 0, LR_DEFAULTCOLOR | LR_SHARED);
Returns the 32x32 image, even though the icon(.ico resource) has images with
other resolution.
To reproduce - load an icon from a resource with the resolution and LR_SHARED
using the code above, then put it on a button and see the size (or see the size
in a debugger).
This bug does not happen on windows.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46980
Bug ID: 46980
Summary: Can't View Airing Anime in Taiga
Product: Wine
Version: 4.0
Hardware: x86-64
OS: Mac OS X
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: contact(a)hannahi.com
Created attachment 64139
--> https://bugs.winehq.org/attachment.cgi?id=64139
Backtrace
Hi,
When I run Taiga (taiga.moe), most features work well (except autodetection of
media players; expected), except the viewing of airing anime.
When 'airing anime' is clicked and a season is specified, the application
crashes and a backtrace is generated.
This feature works flawlessly in a Windows VM on the same hardware.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46600
Bug ID: 46600
Summary: Crash in regedit
Product: Wine
Version: 4.0-rc4
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: zaplo00(a)mt2015.com
Distribution: ---
Created attachment 63499
--> https://bugs.winehq.org/attachment.cgi?id=63499
page fault on read
I created new prefix in wine 4.1, opened regedit and single clicked string key.
Then pressed enter to edit it and regedit crashed with attached error.
"InstallTav" "1.00" was the key name and value
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46433
Bug ID: 46433
Summary: TAB key may not select all window elements - system
wide (μTorrent 2.2.1 example)
Product: Wine
Version: 4.0-rc5
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: zcooger(a)gmail.com
Distribution: ---
Created attachment 63206
--> https://bugs.winehq.org/attachment.cgi?id=63206
Video Example from Wine, ReactOS and Windows
This is a very minor and subtle bug, it's present on presented µTorrent dialog
and several other apps.
Pressing repeatedly TAB key does not iterate over all window elements.
In ReactOS & Wine only links are selected while M$ Windows focuses buttons and
checkboxes too.
This issue may apply system-wide to other 3rd party applications however I
noticed it first in μTorrent 2.2.1 (25302). Did not notice that using Wine
apps.
Pressing buttons and checkboxes using mouse (button down only+move) selects
them but they still can't be selected after TAB meets first/upper window
element.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58131
Bug ID: 58131
Summary: Game-Helper MATRIC
Product: Wine
Version: 10.5
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: mihart1(a)web.de
Distribution: ---
Created attachment 78403
--> http://bugs.winehq.org/attachment.cgi?id=78403
Backtrace-File from Wine
Game-Helper MATRIC will not complete run under Wine
Matric-Hompage:
https://matricapp.com
System information:
Wine build: wine-10.5
Platform: x86_64 (guest: i386)
Version: Windows 10
Host system: Linux
Host version: 6.14.0-1-MANJARO
Many thanks for your Help
Happy Easter
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46487
Bug ID: 46487
Summary: File-Chooser-Dialog blocks slashes in file text field
when why could mean subdirectories
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: n296869(a)rtrtr.com
Distribution: ---
Created attachment 63323
--> https://bugs.winehq.org/attachment.cgi?id=63323
what the dialog shows
For many wine versions, when includes
the fill directory path .e.g copy-pasty short-hand,
it blocks it,
couldn't it re-interpret as go into folder directory?
(less steps required , easier)
i encounter this papercut too frequently...
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=46420
Bug ID: 46420
Summary: Button selection has wrong size
Product: Wine
Version: 4.0-rc3
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: zcooger(a)gmail.com
Distribution: ---
Created attachment 63188
--> https://bugs.winehq.org/attachment.cgi?id=63188
Enlarged example.
This is a very minor and subtle bug, it's visible on all buttons that were
selected by TAB.
Similar ReactOS issue: https://jira.reactos.org/browse/CORE-15241
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45964
Bug ID: 45964
Summary: Winamp top level menus drawn offset to the right and
downwards by a few pixels
Product: Wine
Version: 3.17
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: stu.axon(a)gmail.com
Distribution: ---
Created attachment 62514
--> https://bugs.winehq.org/attachment.cgi?id=62514
Screenshot
In Winamp 5.666 and the community update version [1] top level menus have an
extra grey border on the left and top.
As the content is offset, some parts of the right and bottom are not drawn.
Submenus don't appear to have the same problem.
Tested on crossover wine, and wine
[1] - available by getting on the beta program at https://getwacup.com/
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58135
Bug ID: 58135
Summary: Drag&Drop: Wrong WM_DROPFILES sent to the top level
window when dropping a file into ChildView
Product: Wine
Version: 10.6
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: user32
Assignee: wine-bugs(a)winehq.org
Reporter: axis6404(a)proton.me
Distribution: ---
Created attachment 78411
--> http://bugs.winehq.org/attachment.cgi?id=78411
test(exe+src)
Wrong WM_DROPFILES sent to the top level window when dropping a file into
ChildView.
X11
debian bookworm x64
wine10.6
MainFrame window <-- WM_DROPFILES is sent here
|
----ChildView window (Only DragAcceptFiles()) <-- Drop txt file from KDE
desktop into this view. WM_DROPFILES will never come to the WndProc of this
child view.
Drop2.exe's result:
Windows - MsgBox(_T("OK! ChildView"), _T("ChildView"), MB_OK);
//OnDropFiles@Drop2View.h@line 49
Linux(wine10.6) - MsgBox(_T("Failed!!!! MainFrame"), _T("!!!!MainFrame's
Handler!!!!"), MB_OK); //OnDropFiles@MainFrame.h@line 43
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58134
Bug ID: 58134
Summary: GTA San Andreas: A required security module can not be
activated.
Product: Wine
Version: unspecified
Hardware: x86-64
OS: FreeBSD
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: Alexander88207(a)Protonmail.com
Hello,
when i want to start GTA San Andreas using the original disc copy then i do get
the message "A required security module can not be activated. This program can
not be executed".
The game is using SecuROM.
Tested with Wine 10.3
Thanks in advance.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=45553
Bug ID: 45553
Summary: the hiarcs program stopped working after the
installation of wine 3.12
Product: Wine
Version: 3.12
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: winelib
Assignee: wine-bugs(a)winehq.org
Reporter: visconde77(a)yahoo.com.br
Distribution: ---
Created attachment 61974
--> https://bugs.winehq.org/attachment.cgi?id=61974
stop
the hiarcs program stopped working after the installation of wine 3.12
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=44898
Bug ID: 44898
Summary: Microsoft DirectX 9.0c Redistributable (June 2010)
installer crashes (when installing without prefix that
is created earlier)
Product: Wine
Version: 3.5
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: t6zm3v62fkp7fe5(a)yandex.ru
Distribution: ---
Created attachment 60970
--> https://bugs.winehq.org/attachment.cgi?id=60970
Wine 3.0 terminal output
I used to create prefixes for games with installed DirectX 9.0c by command
wine '<folder>/DXSETUP.exe'
It's comfortable and saves my time.
But in Wine 3.5, DirectX crashes in the beginning of installing and says
"Internal system error occured. Please refer to DXError.log and DirectX.log in
your Windows folder to determine problems".
And now I have to create the game prefix by any other command like
winecfg
and install DirectX in this already created prefix, it doesn't crash in this
way.
Here are all logs from Wine 3.5 and output terminals from Wine 3.0 and 3.5.
OS: Lubuntu 16.04.4, Wine from official Wine repos.
File link: https://www.microsoft.com/en-us/download/details.aspx?id=8109
sha256: 8746ee1a84a083a90e37899d71d50d5c7c015e69688a466aa80447f011780c0d
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=40864
Bug ID: 40864
Summary: Error message on Exit from PDF Eraser
Product: Wine
Version: 1.9.13
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: yousifjkadom(a)yahoo.com
Distribution: ---
Hi. During evaluation of PDF eraser on version 1.9.13 of winehq, I get error
message after closing PDF eraser (after I failed to register PDF eraser due to
bug 40779) & assessment of bug 40778 & bug 40505. Please look for attached
files:
file 1, 2, 3 are screenshots show part of message.
file backtrace error message by using option "save as" that existing in error
message window
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58132
Bug ID: 58132
Summary: HoMM4 map editor crashes on a specific map
Product: Wine-staging
Version: 10.5
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: ww.lss.su(a)gmail.com
CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com
Distribution: ---
Created attachment 78407
--> http://bugs.winehq.org/attachment.cgi?id=78407
backtrace and the map in question in the archive
How to repeat:
1. Run the Heroes of Might and Magic IV map editor (I used GOG version).
2. Open the attached map.
3. In the editor toolbar click "Selection tool" and "Underground".
4. In the middle of the map (in the underground) find the quest hut, the quest
log entry for it must be "Seasonal workers' hut.". Click the "Triggered script"
tab.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=30819
Bug #: 30819
Summary: File|Open and File|Save doesn't work, crash with Wine
COMCTL32.DLL, COMDLG32.DLL
Product: Wine
Version: 1.5.5
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: alejandronova(a)gmail.com
Classification: Unclassified
Created attachment 40360
--> http://bugs.winehq.org/attachment.cgi?id=40360
Backtrace of the crash I get while trying to open files with this editor.
APP REPORT:
http://appdb.winehq.org/objectManager.php?sClass=application&iId=14244
Basically, when I press "Utility | File | Open...", "Utility | File | Save...",
the following happens.
- Pressing the "Desktop" button leads me to an immediate crash.
- There are many issues with file associations.
* PCG files, Utility | File | Import... : They flash for a moment and then
disappear.
* .M50all, .M50prog and .M50combi files: They appear after an F5. If I try to
open them, I get a crash.
Backtrace attached.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58122
Bug ID: 58122
Summary: WSAENOTSOCK error when calling winsock.Send() on
duplicated socket
Product: Wine-staging
Version: 10.4
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: digitman63(a)gmail.com
CC: leslie_alistair(a)hotmail.com, z.figura12(a)gmail.com
Distribution: ---
Process A creates a listening socket, accepts an incoming connection, and
obtains a socket handle hSock.
Process A spawns Process B with the InheritHandles flag, passing its own
ProcessID and the socket handle hSock as command-line arguments.
Process B calls OpenProcess() to get a handle hSrcProcess for the given
ProcessID, then duplicates hSock into hDupSock using
DuplicateHandle(hSrcProcess, hSock, GetCurrentProcess(), &hDupSock, ...);
Process B successfully receives data from the duplicated socket using
winsock.recv(hDupSock, ...).
Process B attempts to send data via winsock.send(hDupSock, ...), but the call
fails with WSAENOTSOCK (10038) ("Socket operation on non-socket").
Process B then tries sending the same data using kernel32.WriteFile(hDupSock,
...), and this operation succeeds.
Why does send() fail while WriteFile() works on the same duplicated handle?
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=54812
Bug ID: 54812
Summary: Wine file dialogs miss button to move up one dir
Product: Wine
Version: 8.4
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: comdlg32
Assignee: wine-bugs(a)winehq.org
Reporter: scallegari(a)arces.unibo.it
Distribution: ---
In the file dialog I get a `back` arrow, but not an `up` arrow button. To move
to the parent directory I can put `..` in the filename and press enter, but it
is not so nice.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=56576
Bug ID: 56576
Summary: Program error window for Screamer Radio when updating
the aforementioned
Product: Wine
Version: 9.6
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: olav.magi(a)hotmail.com
Distribution: ---
Created attachment 76329
--> https://bugs.winehq.org/attachment.cgi?id=76329
Program Error from Wine Debugger
Hi!
I tried to update Screamer Radio from "Stable 2024-04-14" to "Stable
2024-04-15" but the updating was interrupted by the attached dialogue.
"Upgrade timed out" showed up in the Screamer Radio tab/bar where I clicked the
Upgrade button made available under the information of radio station.
How to update this software without the aforementioned error?
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=57915
Bug ID: 57915
Summary: A bug with weapons in the game Dungeon Siege 2.
Product: Wine
Version: 10.2
Hardware: x86-64
OS: Windows
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: d3d
Assignee: wine-bugs(a)winehq.org
Reporter: evil.tyrael.666(a)gmail.com
Created attachment 78156
--> https://bugs.winehq.org/attachment.cgi?id=78156
weapon at the feet
Good morning! I want to report a bug in your program when using it in the game
Dungeon Siege 2. The characters' weapons move from their hands to their feet,
specifically to the very bottom of their legs (screenshot).
I used the following version of the program: WineD3DForWindows_10.2-staging.
There are many complaints about a similar issue in the comments on Steam under
this game (Dungeon Siege 2) when other people also used the WineD3D
application.
I hope my information is useful and helps to fix this issue.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=57911
Bug ID: 57911
Summary: TUBERANK JEET AI SOFTWARE NOT OPENING
Product: Wine
Version: 10.2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: winedbg
Assignee: wine-bugs(a)winehq.org
Reporter: pocomal112(a)codverts.com
Distribution: ---
Created attachment 78154
--> https://bugs.winehq.org/attachment.cgi?id=78154
tuberankjeet AI SOFTWARE FOR RANKIN YOUTUBE VIDEO BUG APP NOT OPENING
THE SOFTWARE CALLED TUBERANK JEET AI DOES NOT WORK DUE TO A BUG THAT DOES NOT
ALLOW THE SOFTWARE TO WORK. I'm asking the team to fix this bug. and there's
another program called YouTube By-Click that also doesn't work in Wine because
of a bug. Please fix the bugs of these two programs. Because I gave up on Linux
because these programs don't work. And I've reported their bugs a lot of times
and no one cares. I'm begging the wine team to fix these programs otherwise I'm
not going back to Linux anymore
If you want information about the software, here it is
https://www.byclickdownloader.com/https://tuberankjeet.com/freeversion
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=57851
Bug ID: 57851
Summary: Program Error Details
Product: Wine
Version: 9.0
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: bwa7v393t(a)penicuick.mozmail.com
Distribution: ---
Created attachment 78072
--> https://bugs.winehq.org/attachment.cgi?id=78072
Back Trace File
See back trace.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=58081
Bug ID: 58081
Summary: Dynasty Warriors 4 Hyper extreme lag and slowness when
run with wow64 enabled dynamically
Product: Wine
Version: 10.5
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: erwiniosef(a)gmail.com
Distribution: ---
Created attachment 78336
--> http://bugs.winehq.org/attachment.cgi?id=78336
DW 4 Hyper terminal log with wow64 enabled dynamically
When running with wined3d and a fresh prefix with wow64 there is extreme lag
in-game. I've read that these maybe issues which reveal that this is a problem
with opengl or something but they seem to be old and there seems to be only one
or two of those reports.
It's my first time making a report here so I'm happy for any improvements to my
bug reporting and if there's more information needed I'll be happy to oblige.
Distro: Arch Linux
Arch: x86_64
Wine: 10.5 devel
[package](https://archlinux.org/packages/multilib/x86_64/wine/)
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=57944
Bug ID: 57944
Summary: wininet:InternetCheckConnectionW Error
Product: Wine
Version: 10.3
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: critical
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: d.astra(a)yopmail.com
Distribution: ---
Created attachment 78191
--> https://bugs.winehq.org/attachment.cgi?id=78191
Error captured with winedebug=+all
No download with embedded browsers (gecko or IE8) possible.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29758
Bug #: 29758
Summary: Wrong font after freeing link labels
Product: Wine
Version: unspecified
Platform: x86
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: winebugs(a)jn-games.de
Classification: Unclassified
Created attachment 38634
--> http://bugs.winehq.org/attachment.cgi?id=38634
Minimal example, including Delphi source code
You can't remove link labels from the memory. I added a minimal example along
with its Delphi source code.
How to use the minimal example:
- Click create
- Click free
- (optional) Click create again
Actual result:
Font of the application changes to "System"
Expected result:
Font should stay like it was before
Notes:
- I did not have the chance to test this with the most recent version of Wine.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=57982
Bug ID: 57982
Summary: 0758:err:virtual:virtual_setup_exception nested
exception on signal stack in thread 0758 addr
0x3f0003f4af stack 0x7fedf170
Product: Wine
Version: 7.0.2
Hardware: aarch64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: liunixfinal(a)gmail.com
Distribution: ---
Created attachment 78235
--> https://bugs.winehq.org/attachment.cgi?id=78235
debugging logs generated after running the application under Wine
My program uses WaitForMultipleObjects to monitor multiple pipes. It runs
normally in a Windows environment, but under Wine, after running for some time,
WaitForMultipleObjects stops working. When data is written to the pipe, it does
not return, and simultaneously, the Wine debug log reports the following error:
0758:err:virtual:virtual_setup_exception nested exception on signal stack in
thread 0758 addr 0x3f0003f4af stack 0x7fedf170
After that, it continuously prints the following log:
04b8:err:sync:RtlpWaitForCriticalSection section 0308D388 "?" wait timed out in
thread 04b8, blocked by 048c, retrying (60 sec)
01f8:err:sync:RtlpWaitForCriticalSection section 0308D388 "?" wait timed out in
thread 01f8, blocked by 048c, retrying (60 sec)
and this is my code:
while (true)
{
DWORD dwWait = WaitForMultipleObjects(pPipeThread->chnNum + 1, // number
of event objects
pPipeThread->hEvents, // array of event objects
FALSE, // does not wait for all
INFINITE); // waits indefinitely
if (dwWait == WAIT_FAILED)
{
DWORD dwError = GetLastError();
char errorMsg[512];
FormatMessageA(FORMAT_MESSAGE_FROM_SYSTEM |
FORMAT_MESSAGE_IGNORE_INSERTS,
NULL, dwError, 0, errorMsg, sizeof(errorMsg), NULL);
cerror("CPipeWrapper WaitForMultipleObjects failed, Error Code: %u,
Error Message: %s", dwError, errorMsg);
}
int i = dwWait - WAIT_OBJECT_0; // determines which pipe
if (i < 0 || i > PIPE_NUM_PER_THREAD)
{
_dout("WaitForMultipleObjects threadidx(%d) chnNum(%d) Index out of
range(%d).", pPipeThread->threadIdx, pPipeThread->chnNum, i);
continue;
}
if (i == 0)
{
if (CPipeMgr::Instance()->IsQuit())
{
_dout("PipeReadThread quit threadidx(%d) chnNum(%d)",
pPipeThread->threadIdx, pPipeThread->chnNum);
return 0;
}
HandleChnCfgUpdate(pPipeThread);
_dout("PipeReadThread config update threadidx(%d) chnNum(%d)",
pPipeThread->threadIdx, pPipeThread->chnNum);
continue;
}
--i;
unsigned int chnID = pPipeThread->chnIDs[i];
CNamePipe* pPipe = CPipeMgr::Instance()->GetPipe(chnID);
int rdLen = pPipe->GetOverlapReadedNum();
int reminderLen = pPipe->GetReminderLen();
if (rdLen > 0)
{
reminderLen = CMemDataMgr::Instance()->DecodeDrvData(chnID,
pPipe->GetReadedBuf(), reminderLen + rdLen);
}
int readed = 0;
pPipe->ReadPipe(reminderLen, readed);
}
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=57939
Bug ID: 57939
Summary: Anadius = - The Sims 4 Updater
Product: Wine
Version: unspecified
Hardware: arm
OS: MacOS
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: cwdcdn(a)hotmail.ca
When running DLC Unlocker/updater, the wrapper doesn't show text, and quits
unexpectedly.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=51546
Bug ID: 51546
Summary: ran a application and it gave an error
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: mrtbryanonlinux(a)gmail.com
Distribution: ---
Created attachment 70389
--> https://bugs.winehq.org/attachment.cgi?id=70389
Im trying to run Xenos64.exe for gta v and then that happened plz help
tried to run a application called xenos64.exe i use it for gta v so i wined it
then that happened. plz try and fix ASAP
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=13884
Summary: No music in Blue Wish Resurrection Plus
Product: Wine
Version: CVS/GIT
Platform: Other
URL: http://www004.upp.so-net.ne.jp/x_xgameroom/
OS/Version: other
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: leffeman(a)gmail.com
Created an attachment (id=13974)
--> (http://bugs.winehq.org/attachment.cgi?id=13974)
Normal Wine log
Music doesn't work in BWR+ 1.11.
The music is stored as MP3 data files.
This might be the same as bug 9554.
There are quite a few DirectMusic stubs in the log, so perhaps something is not
implemented.
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=51378
Bug ID: 51378
Summary: Failures with `DetourCreateProcessWithDllEx` for
Microsoft's Detours Library
Product: Wine
Version: 6.11
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: andrew.jones(a)vector.com
Distribution: ---
Created attachment 70234
--> https://bugs.winehq.org/attachment.cgi?id=70234
stderr from WINEDEBUG
I am trying to work with a third-party tool that use Microsoft's Detours
Library:
https://github.com/microsoft/Detours
but it seems that the API call `DetourCreateProcessWithDllEx` inside of Detours
does not work correctly when run under Wine.
The implementation for `DetourCreateProcessWithDllEx{A/W}` can be found here:
https://github.com/microsoft/Detours/blob/bc7688373bbbb185277788c04f68ae67b…https://github.com/microsoft/Detours/blob/bc7688373bbbb185277788c04f68ae67b…
Helpfully, Detours includes with a sample application `withdll.exe` that
utilises the `DetourCreateProcessWithDllEx` API:
https://github.com/microsoft/Detours/blob/fe7216c037c898b1f65330eda85e6146b…
I built Detours from git (fe7216c037c898b1f65330eda85e6146b6e3cb85) on Windows
10 (19042.1052) using MSVC 19.29.30038.1; this gave me the resulting binaries
`withdll.exe` and `simple64.dll`. Running `withdll.exe` to inject
`simple64.dll` on Windows 10 gives:
```
C:\Users\avj\Downloads\Detours-master\bin.X64>withdll.exe /d:simple64.dll
withdll.exe
withdll.exe: Starting: `withdll.exe'
withdll.exe: with
`C:\Users\avj\Downloads\Detours-master\bin.X64\simple64.dll'
simple64.dll: Starting.
simple64.dll: Detoured SleepEx().
Usage:
withdll.exe [options] [command line]
Options:
/d:file.dll : Start the process with file.dll.
/v : Verbose, display memory at start.
/? : This help screen.
simple64.dll: Removed SleepEx() (result=0), slept 0 ticks.
```
However, running this under a fresh Wine 6.11 built (64-bit only;
WINEARCH=win64) on openSUSE (gcc 10.3.0) gives me this:
```
withdll.exe: Starting: `withdll.exe'
withdll.exe: with `Z:\tmp\wine\simple64.dll'
withdll.exe: DetourCreateProcessWithDllEx failed: 2
```
I have attached the stderr from running
`WINEDEBUG=+timestamp,+process,+tid,+seh,+module wine64 withdll.exe
/d:simple64.dll withdll.exe 2>log.txt` to this case.
I have also uploaded the two binary files (`withdll.exe` and `simple64.dll`) to
Google Drive:
https://drive.google.com/file/d/1DmFHYcm4-quslIAsHV1fwbzi6-JxRZse/view?usp=…
Note: the source code for these files are MIT licensed, so there should be no
issues in me sharing my binary builds (i.e., I do not consider these files
proprietary).
Is it obvious what's wrong here? Is this a Wine bug or some configuration issue
that I can resolve?
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=44978
Bug ID: 44978
Summary: Text in WC3 World Editor isn't colored properly
Product: Wine
Version: 3.6
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: hededrk(a)gmail.com
Distribution: ---
Created attachment 61100
--> https://bugs.winehq.org/attachment.cgi?id=61100
How it is supposed to look
Modified data entries in the object editor are supposed to be highlighted with
a different with a purple color (or blue in campaign editor). However, they are
not.
Might be related to #11718.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=57951
Bug ID: 57951
Summary: Ultrakill: level 1-1 has invisible tree leaves on
WINED3D, works fine on DXVK
Product: Wine
Version: 10.2
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: trivial
Priority: P2
Component: d3d
Assignee: wine-bugs(a)winehq.org
Reporter: sacha.fazzari(a)protonmail.com
Distribution: ---
Created attachment 78198
--> https://bugs.winehq.org/attachment.cgi?id=78198
in this tarball there is 2 screenshots ( one with DXVK and one WINED3D ) and
the wine cli output
Hi,
While playing the level 1-1 of Ultrakill with WINED3D i saw that the leaves of
the trees were invisible (see attachment), however the leaves renders correctly
with DXVK. I have the wine cli output in the attachment. I'm using Wine 10.2
but it also happens on 10.3 and on git
To reproduce: go to level 1-1 with WINED3D and look at the leaves of the trees
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=58066
Bug ID: 58066
Summary: Virtual desktop doesn't resize correctly (missing
window border) when VD size = desktop size
Product: Wine
Version: 10.5
Hardware: x86-64
URL: https://www.moddb.com/games/airline-tycoon/downloads/a
irline-tycoon-demo
OS: Linux
Status: NEW
Keywords: download, regression
Severity: normal
Priority: P2
Component: winex11.drv
Assignee: wine-bugs(a)winehq.org
Reporter: gyebro69(a)gmail.com
CC: rbernon(a)codeweavers.com
Regression SHA1: 7020807d11415b32341fa13f2354bd1e5477175b
Distribution: ArchLinux
Hello,
I have one more issue or rather an annoyance regarding the use of virtual
desktop since Wine-10.5.
When I set up a virtual desktop in winecfg that matches the size of my screen
(1440X900) and I start a game that uses a lower resolution (640X480, 800X600
etc) then the game appears in the upper left corner but the rest of the virtual
desktop is black. In other words the virtual desktop isn't resized to match the
game resolution.
The problem doesn't occur when I start the game in virtual desktop sized
smaller than my desktop (1024X768 etc).
Reverting the following commit restores the old behavior for me:
7020807d11415b32341fa13f2354bd1e5477175b
winex11: Use the state tracker for the desktop window _NET_WM_STATE.
The issue is somewhat similar to bug #56149.
You can reproduce the problem with Airline Tycoon demo. The game uses a fixed
640X480 resolution.
X.Org X Server 1.21.1.16
XFCE/XFWM 4.20
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=51053
Bug ID: 51053
Summary: Alan Wake Crashes After Intro Cut Scene
Product: Wine
Version: 6.6
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: matthewcboyd(a)tutanota.com
Distribution: ---
Created attachment 69915
--> https://bugs.winehq.org/attachment.cgi?id=69915
Log File
Seconds after the intro cut scene of Alan Wake the game crashes.I have attached
the log file. There is no visible error message on the crash. I am using the
GOG version 1.06.17.0155 of the game.
My System:
AMD Ryzen 5 2600X | 16GB DDR4-3000 CL15 | MSI RX 580 8GB Gaming X | Mesa 21.0.2
| Manjaro 21.0.2 | Mate 1.24.1 | Kernel 5.11.14-1-MANJARO
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=57738
Bug ID: 57738
Summary: Title of "Select Topic" window in hh.exe is not
translatable
Product: Wine
Version: 10.0
Hardware: x86-64
OS: Linux
Status: NEW
Severity: normal
Priority: P2
Component: hhctrl.ocx
Assignee: wine-bugs(a)winehq.org
Reporter: alexhenrie24(a)gmail.com
Distribution: ---
Created attachment 77937
--> https://bugs.winehq.org/attachment.cgi?id=77937
Screenshot
Steps to reproduce:
1. Download
https://raw.githubusercontent.com/HeliumProject/InnoSetup/refs/heads/master…
2. Run `wine ISetup.chm`
3. Go to the Index tab and double-click "runmaximized"
A window titled "Select Topic:" appears. Its title is hardcoded at
https://gitlab.winehq.org/wine/wine/-/blob/1f23d8934832a2a7e07db77d4d46cb6a…
and is consequently always in English regardless of the user's locale.
$ sha256sum ISetup.chm
120bef4bb235789a27a2c0d22f78c93cd5068d96182471e6a69b513e8fef7faf
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=39453
Bug ID: 39453
Summary: Graphs not rendering using gdiplus
Product: Wine
Version: 1.7.52
Hardware: x86
OS: other
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: gdiplus
Assignee: wine-bugs(a)winehq.org
Reporter: ldv1452(a)gmail.com
Created attachment 52566
--> https://bugs.winehq.org/attachment.cgi?id=52566
Comparison builtin gdiplus vs native gdiplus
Certain graphs (e.g. box plots) and graph components (e.g. axes) are not
rendered while using builtin gdiplus. This happens irrespective of the OS and
is solved when using native gdiplus (see attached examples).
The problem can be observed using this software:
https://sourceforge.net/projects/fruits/files/FRUITS2_installer.msi/download
a file needs to be loaded and run (by pressing Estimate in the software) to
generate the graphs:
https://sourceforge.net/projects/fruits/files/simple_CN_model.frt/download
I created the software (using Visual Studio). If requested I can provide the
source code.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
http://bugs.winehq.org/show_bug.cgi?id=29912
Bug #: 29912
Summary: No parent button in file selection dialog
Product: Wine
Version: 1.4-rc1
Platform: x86-64
URL: http://www.winuae.net/files/InstallWinUAE2330.exe
OS/Version: Linux
Status: UNCONFIRMED
Severity: enhancement
Priority: P2
Component: -unknown
AssignedTo: wine-bugs(a)winehq.org
ReportedBy: markk(a)clara.co.uk
Classification: Unclassified
In some types of file selection dialog, there is no parent button. The
equivalent dialog in Windows XP does have a parent button, which makes
navigating the directory tree much easier.
If the program opens a selection dialog positioned in a subdirectory, to
navigate to the parent you need to use the treeview on the left side to
navigate down the directory hierarchy instead.
I noticed this while testing WinUAE, but presumably any program which uses the
same type of dialog will be similar.
- Download and run the WinUAE installer. Check the box to run the program at
the end.
- When the WinUAE Properties window appears, click ROM in the treeview then
click one of the "..." buttons to show a file selection dialog. There is no
parent button in the dialog. (There is also no indication of where in the
directory tree the current view is.)
--
Configure bugmail: http://bugs.winehq.org/userprefs.cgi?tab=email
Do not reply to this email, post in Bugzilla using the
above URL to reply.
------- You are receiving this mail because: -------
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=41729
Bug ID: 41729
Summary: 2GIS 3.0 application crashes on exit.
Product: Wine
Version: 1.9.23
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: sergey.rahmanov(a)gmail.com
Distribution: ---
Created attachment 56166
--> https://bugs.winehq.org/attachment.cgi?id=56166
Crash report.
2GIS crashes on every exit.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=56073
Bug ID: 56073
Summary: Some Unity games don't receive keyboard input when
using virtual desktop
Product: Wine
Version: 5.12
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: random-nick(a)mail.com
Distribution: ---
The issue seems to be absent in 5.11 and present in 5.12. Git bisect resulted
in commit 57124b9905bbdedfdd0bca777481d570ffa1769a
Setting UseTakeFocus to N successfully works around the issue, which led me to
believe it might be https://bugs.winehq.org/show_bug.cgi?id=48121 but the PoC
attached there still works properly in the virtual desktop (and the behaviour
without the virtual desktop seems unchanged).
I couldn't find a free Unity game which replicates the issue.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=48121
Bug ID: 48121
Summary: Unity games do not fire
OnApplicationFocus/OnApplicationPause events on focus
regain
Product: Wine
Version: unspecified
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: user32
Assignee: wine-bugs(a)winehq.org
Reporter: dt(a)zeroitlab.com
Distribution: ---
Created attachment 65713
--> https://bugs.winehq.org/attachment.cgi?id=65713
Proof of concept patch
I've tested with both stable and staging, neither gets unity to fire
OnApplicationFocus and OnApplicationPause events on focus regain. I've tracked
this down by reverse engineering the native unity binary.
There are 4 window messages to which the unity engine reacts by firing these
internal events. They are:
1. WM_SIZE (when wParam == 0 && unity's window is active)
2. WM_EXITSIZEMOVE
3. WM_NCPOINTERUP
4. WM_NCPOINTERDOWN (when DragDetect() says the pointer is in bounds for the
window; pointer coordinates are passed in lparam)
Of all these events, it seems to me, that the ones we should be firing and are
not currently, are WM_NCPOINTERUP and WM_NCPOINTERDOWN.
I was not sure how to get the pointer coordinates, but I was able to confirm
this finding, by firing WM_NCPOINTERUP with wparam=0, lparam=0 on focus regain
because that event had no such bounds check in the unity engine code. With this
change, my target application indeed unpauses.
Observing the issue is fairly easy,
https://docs.unity3d.com/ScriptReference/MonoBehaviour.OnApplicationFocus.h…
adding this example behaviour to the camera and building the project for
windows then running it in wine reproduces.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=57998
Bug ID: 57998
Summary: ClickOnce apps don't start after installing winetricks
dotnet472
Product: Wine
Version: 10.3
Hardware: x86-64
OS: MacOS
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: maemigh(a)gmail.com
Created attachment 78259
--> https://bugs.winehq.org/attachment.cgi?id=78259
Console log of trying to start clickonce app
After using winetricks to install dotnet472, clickonce apps won't start.
A bunch of these errors show up 0158:err:ole:create_server class
{20fd4e26-8e0f-4f73-a0e0-f27b8c57be6f} not registered
0158:err:ole:com_get_class_object no class object
{20fd4e26-8e0f-4f73-a0e0-f27b8c57be6f} could be created for context 0x4
The following command attempts to start a sample hello world app. If it's
relevant, it doesn't work on wine 10.0 or 10.3, but it does work on crossover
25.
wine .wine/drive_c/windows/syswow64/rundll32.exe
dfshim.dll,ShOpenVerbApplication
https://maemigh.github.io/HelloWorldClickOnce/published/HelloWorldClickOnce…
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=55819
Bug ID: 55819
Summary: when alt+tab out and in again, the input no longer
working
Product: Wine
Version: unspecified
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: l12436(a)yahoo.com.tw
Distribution: ---
In Parasocial game that made by chilla art, when alt+tab out and in again, the
mouse no longer working.
Even alt+Enter to make it windows mode and full screen mode again, only mouse
work, keyboard is not working and there are choose in game.
Game is on Steam
call Parasocal
you can reproduce by play it in full screen, and alt+tab out and in again.
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.
https://bugs.winehq.org/show_bug.cgi?id=58061
Bug ID: 58061
Summary: [FL Studio] When holding CTRL to zoom in the playlist,
it also scrolls vertically - possible regression
Product: Wine
Version: 10.5
Hardware: x86-64
OS: Linux
Status: UNCONFIRMED
Severity: major
Priority: P2
Component: -unknown
Assignee: wine-bugs(a)winehq.org
Reporter: agarplayerarlon(a)gmail.com
Distribution: ---
Created attachment 78314
--> https://bugs.winehq.org/attachment.cgi?id=78314
video of the issue
So basically the normal behavior is that if you hold CTRL in the playlist and
scroll the mouse wheel, it only zooms and doesen't scroll, but after Wine 10.4
the bug started appearing and instead of only zooming, it also started to
scroll up and down.
I've also just tested on Windows and it works correctly, so it's not a mouse
problem, I've also tested on 2 different distros with Wine 10.4 and 10.5 and I
have the same issue on both of them.
In the video that I've attached I was holding CTRL all the time, and as you can
see it zooms in the playlist, but it also scrolls vertically, which it
shouldn't, it should only scroll vertically when I'm NOT holding down CTRL.
My system info:
NVIDIA rtx 4060 with 570.133 drivers (latest arivers at the moment)
Wayland + xwayland for Wine
--
Do not reply to this email, post in Bugzilla using the
above URL to reply.
You are receiving this mail because:
You are watching all bug changes.