[Bug 25997] New: Garmin Gns400w-500w Trainer Stops responding to user except for quiting and setting unit mode, shortly after application startup

http://bugs.winehq.org/show_bug.cgi?id=25997

Summary: Garmin Gns400w-500w Trainer Stops responding to user
                    except for quiting and setting unit mode, shortly
                    after application startup
           Product: Wine
           Version: 1.3.11
          Platform: x86
        OS/Version: Linux
            Status: UNCONFIRMED
          Severity: normal
          Priority: P2
         Component: -unknown
        AssignedTo: [e-mail]
        ReportedBy: [e-mail]

fixme:class:CLASS_GetClassLong offset -12 (GCLP_HCURSOR) not supported on other
process window 0x1007a

The above is the only "error" data I see when I run the garmin G530SIM.exe, The
program loads into a window and draws the devices, creates window handles and
menu bar, application ask you to "turn on the unit" clicking the "on switch"
cause the application to start and emulate a real garmin GNS430w including it
startup screens, but we get stuck on the initialization screen and never get to
the calibration of the instruments page.

Viewing the process with top gives:
top - 02:33:26 up 1 day, 2 min,  3 users,  load average: 1.24, 0.99, 1.11
Tasks: 198 total,   2 running, 196 sleeping,   0 stopped,   0 zombie
Cpu(s):  7.8%us, 14.5%sy,  0.0%ni, 66.7%id, 11.0%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:   2578264k total,  2509176k used,    69088k free,   124252k buffers
Swap:  1582360k total,        0k used,  1582360k free,  1757432k cached

PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND            
 1925 swidmer   20   0 1574m  28m  10m S   19  1.1   0:09.33 G530SIM.exe        
 1929 swidmer   20   0  6008 3356  680 S   11  0.1   0:06.94 wineserver         
 1016 yiff      20   0  2064  504  380 R    5  0.0  57:30.04 yiff               
 1943 swidmer   20   0 1576m 9444 6808 S    4  0.4   0:03.54 hsi400wx

I did use winetools to load mfc42 which allowed to program to start and get
this far.

My system is on a Ubuntu 10.04, running Wine 1.3.11 - latest available via apt
repositories

[Bug 25997] Garmin Gns400w-500w Trainer Stops responding to user except for quiting and setting unit mode, shortly after application startup

http://bugs.winehq.org/show_bug.cgi?id=25997

--- Comment #1 from [e-mail] 2013-08-05 12:45:19 CDT ---
This ticket has not been updated for over 900 days. Development recommends
to check the status on your bug every release or two and let to be known if the
bug is still present. If not, mark it fixed.

Is this still an issue with 1.7.0 or higher ?

[Bug 25997] Garmin Gns400w-500w Trainer Stops responding to user except for quiting and setting unit mode, shortly after application startup

http://bugs.winehq.org/show_bug.cgi?id=25997

Anastasius Focht  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|UNCONFIRMED                 |RESOLVED
                 CC|                            |[e-mail]
         Resolution|---                         |ABANDONED

--- Comment #2 from Anastasius Focht  ---
Hello folks,

resolving 'abandoned' since no one bothered to answer.

Reopen if still a problem with _recent_ Wine version (1.7.x)

Regards

[Bug 25997] Garmin Gns400w-500w Trainer Stops responding to user except for quiting and setting unit mode, shortly after application startup

http://bugs.winehq.org/show_bug.cgi?id=25997

Bruno Jesus  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|RESOLVED                    |CLOSED

--- Comment #3 from Bruno Jesus  ---
Closing.